CS3 - no update option even after registering

Hi,
I recently installed my CS3 suite and then registered. (I have been buying adobe software for years, so my name and email were already registered). Upon completeing registration, it said an email would be sent with a "free gift" or something (guessing it is a plug-in or something).
Anyway, that email never came and the update tab in not selectable. All programs in the suite are stuck on first release versions. So like in premiere, I can not open any .mxf files until i can update.
Any insight on this or links to other posts (i did search before posting but didn't find anything)
Thanks!

Ryan,
My Free Gift email came several weeks after installing the software. It was the same email as that which came after installing a previous version. If I remember correctly, it offers a typeface (the same one that I downloaded from the first free gift offer) and a voucher for 10% off any Classroom in a Book book from Adobe's store but Amazon offer these books for much less, even after the 10% discount, so it's of no use. Oh, and something else that I can't remember.

Similar Messages

  • Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

    Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
    Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

    Ok, I have the fix!! After several frustrating days it finally just works.
    The process:
    Upgrade your Macs to 10.6 (Snow Leopard)
    Powercycle your modem AND time capsule / airport TWICE
    Reset your time capsule with a pin or paperclip on the back
    Follow the prompts to setup your time capsule / airport access
    -- On your Macs
    Go to System Preferences > Network > Airport > Advanced > TCP/IP
    Click "Renew DHCP Lease" then click "Ok"
    Click Apply
    Turn off Airport
    Turn Airport on
    IT WORKS!!!
    One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
    Hope this helps-
    Joshua

  • IMovie: Not Finding Instant Replay or Rewind Options Even After Following Directions

    iMovie: When I am trying to do the Instant Replay or Rewind options, they are not available, even after following online help directions to double click video and select Clip > Instant Replay or Rewind.  They options just don't appear, they aren't even grayed out or anything.  Help!

    This forum is for imovie iOS (iPads and iPhones), I am guessing by your post you are refering to iMovie for Mac?
    Could you please give the iMovie version number, OS version, and what you are machine you are editing on.
    We'll see if we can get this in the relevant forum, or help answer your question.

  • My iPhone 4s on the latest update freezes even after a full restore..  is it gone?

         At first, my iPhone 4s completely froze and I was unable to turn it on (even after holding power/home button--the apple logo would come on and then it would just turn off).  I wasn't able to get it into restore or DFU mode.  After some troubleshooting, I decided to order a new battery.  I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.  If I unplug the phone and then hold down the power and home buttons for about 20 seconds, it restarts and shows the apple logo and shows the initial lock screen.  If I let it scroll through the different languages for the "slide to unlock" text, it gets to what looks like japanese or chinese and then freezes.  I then have to hold power+home again to restart it.  If I slide it immediately when it shows up, it initially froze right away--but after another restart, it worked.  I then am able to set it up and get to the wall of apps screen.  From there, the phone worked for about half a day and then it froze up again (black screen, couldn't wake it up, stuck at apple logo and then just turns off).
         I then was able to restore it AGAIN (on my own personal computer with a fresh install of itunes, I'm doing this for a friend) but the same symptoms persist--it will freeze if I don't unlock it right away, it freezes once when I unlock it right away, and after another restart, it gets through setup and to the wall of apps.  The first time I set it to restore from iCloud and re-installed all of her apps.  This time, I signed in with her Apple ID and enabled iCloud but did not download any of her old apps.  When I go to the apple store, under featured and top apps its just a blank white screen but when I search for an app it does show results.  As of right now (30 minutes after restore) it IS working, but it worries me that the same bugs happened after a restore.  I feel it's only a matter of hours before the phone freezes up again and requires a restore.
    She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).  Help keep an iPhone fan!  Do these problems sound familiar to anyone?  I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it--I just wanted to get some opinions on if this phone is even worth working on more than I already have since the issues remain even after multiple full restores.
    Any help would be appreciated!  Sorry for the wall of text.
    -Adam (on behalf of Kathleen Morton)

    After some troubleshooting, I decided to order a new battery.  I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
    Sorry, your repair ruined the iPhone.
    She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
    After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
    I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
    Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

  • Error while updating order - even after using recommended format

    Used below while updating order:
    1) Transaction
    2) Synchronization
    still getting below error:
    Caused by: atg.service.pipeline.RunProcessException: An exception was thrown from the context of the link named [updatePriceInfoObjects].
            at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:393)
            at atg.service.pipeline.PipelineChainContext.runProcess(PipelineChainContext.java:207)
            at atg.service.pipeline.PipelineManager.runProcess(PipelineManager.java:475)
            at atg.commerce.pipeline.CommercePipelineManager.runProcess(CommercePipelineManager.java:123)
            at atg.commerce.order.OrderManager.updateOrder(OrderManager.java:2905)
            ... 64 common frames omitted
    Caused by: atg.commerce.CommerceException: Saving order 818320012 failed because doing so would result in data being overwritten. This save attempt had an out of date repository item [pricingAdjustment].
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.writeProperties(ProcSavePriceInfoObjects.java:1428)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePricingAdjustments(ProcSavePriceInfoObjects.java:1316)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1185)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveShippingItemsSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1076)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePriceInfo(ProcSavePriceInfoObjects.java:1052)
            at atg.projects.store.order.processor.StoreProcSavePriceInfoObjects.savePriceInfo(StoreProcSavePriceInfoObjects.java:101)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveOrderPriceInfo(ProcSavePriceInfoObjects.java:807)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.runProcess(ProcSavePriceInfoObjects.java:716)
            at atg.service.pipeline.PipelineLink.runProcess(PipelineLink.java:255)
            at atg.service.pipeline.PipelineChain.runProcess(PipelineChain.java:365)
            ... 68 common frames omitted
    Caused by: atg.repository.ConcurrentUpdateException: no rows updated oldVersion=1 for item=pricingAdjustment:pa5090009 in GSATransaction=atg.adapter.gsa.GSATransaction@2c6042ec    thread=[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' transaction=Xid=BEA1-439B3F1AD2C4DD758FA4(744502646),Status=Active,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=3600,activeThread=Thread[[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads],XAServerResourceInfo[ATGProductionDS_atgdv02g3]=(ServerResourceInfo[ATGProductionDS_atgdv02g3]=(state=started,assigned=none),xar=ATGProductionDS,re-Registered = false),SCInfo[atgdv02g3+ss_ps01]=(state=active),local properties=({weblogic.jdbc.jta.ATGProductionDS=[autoCommit=true,enabled=true,isXA=true,isJTS=false,vendorID=0,connUsed=true,doInit=false,'null',destroyed=false,poolname=ATGProductionDS,appname=null,moduleName=null,connectTime=38,dirtyIsolationLevel=false,initialIsolationLevel=2,infected=false,lastSuccessfulConnectionUse=1384308810784,secondsToTrustAnIdlePoolConnection=10,currentUser=null,currentThread=null,lastUser=null,currentError=null,currentErrorTimestamp=null,JDBC4Runtime=true,supportStatementPoolable=true,needRestoreClientInfo=false,defaultClientInfo={},supportIsValid=true]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=ss_ps01+devrdatgap138.dev.nintendo.com:10180+atgdv02g3+t3+, XAResources={ATGPublishingDS_atgdv02g3, WLStore_atgdv02g3__WLS_ss_ps01, ATGSwitchingDS_A_atgdv02g3, ATGSwitchingDS_B_atgdv02g3, WSATGatewayRM_ss_ps01_atgdv02g3, ATGAgentDS_atgdv02g3, ATGProductionDS_atgdv02g3},NonXAResources={})],CoordinatorURL=ss_ps01+devrdatgap138.dev.nintendo.com:10180+atgdv02g3+t3+)
            at atg.adapter.gsa.GSAItemDescriptor.updateItem(GSAItemDescriptor.java:7507)
            at atg.adapter.gsa.GSARepository.updateItem(GSARepository.java:1075)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.writeProperties(ProcSavePriceInfoObjects.java:1424)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.savePricingAdjustments(ProcSavePriceInfoObjects.java:1316)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1187)
            at atg.commerce.order.processor.ProcSavePriceInfoObjects.saveShippingItemsSubtotalPriceInfos(ProcSavePriceInfoObjects.java:1077)
            ... 74 common frames omitted

    Update your Order with the pattern suggested by Devon, here is the link
    Design Pattern for Updating an ATG Order | Devon Hillard's Digital Sanctuary

  • No changes in Update rules even after changes in Communicatin struct

    Hello All,
    I have made changes to a transfer structure i.e. I added a field in the Communication structure and mapped in the transfer structure. I was expecting the update rule to be deactivated after this. But the Update rule is activated. Because of this I am not able to accomodate my new infoObject in the update rule. What might be the problem?
    Regards,
    KP

    Hi KK PP,
                     Update rules are only pertained to Data targets,These helps to map the object to the Infosource using a rule.If you change the transfet structure or communication structure it will not effect update rules.If you add some object to your data target then update rules will be changed.
    Regards
    Karthik

  • Why does CC still fail to update Apps even after the latest version (1.1.1.220)

    I haven't been able to update several software for weeks and thought the latest Createive Cloud  update on 8/20/13  (1.1.1.220) would solve the problem, it did not. I keep getting errors "Update Failed" Error encountered during installation. (U44M1P7) Is this a CC issue or an Internet connection issue I should take up with Comcast? Either way I cannot upload the upgrades I need and pay for.

    Hi SKCuller,
    For the products opening as trials, is there a "License This Software" button available? If there is, you should be able to sign in with your Adobe ID and not have it open as a trial.
    You can install CS6 versions, if you click the More Information link below the product name in Creative Cloud for desktop app, that opens the product page where you can select to download the CS6 version.
    Here is an example for Photoshop:
    (click to view larger)
    -Dave

  • Update fails even after running as Admin

    I'm using Firefox 6 on Windows XP SP3. I normally log in as a limited user and use the Admin account for installing.
    Some Firefox and Thunderbird updates have failed to fully update. I'll run the programs as Admin or log in as Admin and run the updates. The programs update successfully under the Admin account, but when I switch back to the limited account, it tells me the update can't complete. When I check Help > About, it shows the updated version number. The only way I've been able to get rid of the message, is to change my normal account to an administrator, start Firefox so the update completes, then change the account back to limited. This doesn't happen with every update. The update to Firefox 6.0 is one of the problem updates.

    If files already have been downloaded then you need to remove the files in the updates and updates\0 folder.<br />
    You can delete active-update.xml and updates.xml as well if present.
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)

  • Software update notification - even after updating

    I updated my Z10 with v 10.1.0.4181 two days ago using BB Link, but I am still getting the software update notification in the hub, telling me to update to the same version that I have already updated using BB Link. Doesn't the BB servers check for version information before spamming me with notifications? Did this with the previous version as well.
    As per the usual forum requests with any kind of query:
    1) Yes, I took the battery out and put it back 
    2) I did 2 backflips while holding the blackberry
    3) I turned round-and-round to the point of dizzyness with the blackberry in my pocket
    Issue still present.
    I've been complaining about this issue since I got the Z10 a few months ago. For the love of God, can someone PLEASE send this issue to the BB10 developers instead of telling us to reset our battery and other unrelated "fixes". Thank you.

    Phoeniyx wrote:
    I updated my Z10 with v 10.1.0.4181 two days ago using BB Link, but I am still getting the software update notification in the hub, telling me to update to the same version that I have already updated using BB Link. Doesn't the BB servers check for version information before spamming me with notifications? Did this with the previous version as well.
    As per the usual forum requests with any kind of query:
    1) Yes, I took the battery out and put it back 
    2) I did 2 backflips while holding the blackberry
    3) I turned round-and-round to the point of dizzyness with the blackberry in my pocket
    Issue still present.
    I've been complaining about this issue since I got the Z10 a few months ago. For the love of God, can someone PLEASE send this issue to the BB10 developers instead of telling us to reset our battery and other unrelated "fixes". Thank you.
    Have deleted any of the pre-install program from the phone, if you did it will tell you that you an update available
    Also it could an update for some carrier specific program that it wants to update, or it could be a few OS files that are specific to your carrier that need to be updated (like the radio files)
    Using the Playbook and the Z10 and the Z30 and loving them
    Martin

  • "WS-I Analyze" button is disabled even after registering WS-I Testing Tools

    Hello,
    I've downloaded WS-I Testing Tools and registered them within the JDev 10.1.3.2.
    I can successfully generate the WS-I Profile Conformance Report for my WSDL file in JDev IDE, so I am sure that JDev knows where WS-I Testing Tools are and can work with them.
    What still does not work is the "WS-I Analyze" button in the HTTP Analyzer, which is supposed to provide capability of running the web service messages thru the WS-I Conformance test cases. I am following the instructions in the http://www.oracle.com/technology/products/jdev/howtos/1013/ws-i/wsi_howto.html but the button is still disabled as it was before teh WS-I test tools were registered with JDev.
    How to run the WS-I tests with the messages captured in the HTTP Analyzer in JDev?
    Thank you!

    You mean the sections about Top States, Business Environment, Labour Climate, etc.? They are missing with both SeaMonkey and Firefox. I had to load that page with Safari to see what you were talking about. The validation of the page shows 214 errors and 40 warnings. That probably accounts for the problem. Mozilla browsers are more picky about valid code.
    * http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.areadevelopment.com%2FTop-States-for-Doing-Business%2FQ3-2013%2Fsurvey-results-landing-page-142378.shtml

  • Why does firefox update itself even when i tell it not to? Everytime it updates itself it messes up and crashes, make it stop. I like firefox but if I keep having to unistall and reinstall it ever month to every other month I am going to be done with it

    Fire Fox updates itself even after I tell it not to. The new version it updates to crashes, adobe flash player doesn't work on it and it takes forever to load when it does work. I have used fire fox for years now but if this keeps up I will find something else to use.
    == This happened ==
    A few times a week
    == When you came out with fire fox 6.6 or whatever

    I also have this problem of Firefox updating by itself even when I turn off auto-update.
    For whatever reason, there are situations where you do not want to update or download a large file, because you're working offline, have a slow connection, or have a very low download allowance etc. Usually the update doesn't work and cause Firefox to crash. After that it cannot be started again. This is with Firefox Portable but I think I've had this problem the normal Firefox. With the portable version I can just back up a single folder but it is still time wasting and annoying.
    I've noticed that when I start Firefox with auto-update turned off, it changes the options to auto-update, it also does this periodically. So every time I start Firefox I have to turn off auto-update, and I have to do this from to time because Firefox will by itself turn back on the auto-update.

  • After iOS 8 update doesn't sign in my FaceTime and email account keeps saying incorrect password even after putting right password I tried reset option already still says the same incorrect Please Help

    After iOS 8 update doesn't sign in my FaceTime and icloud email account keeps saying incorrect password even after putting right password
    I have already tried reset option already still says the same incorrect Please Help

    Hi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???

    Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???  My plug are asking me to re-register them too.  This is annoying.  Please help!!!!!

    How do you try to start the repair dialogue? By starting Aperture or by opening the Library?
    If you not already have tried it with directly opening the library: 
    reveal your Aperture Library in the Finder
    Whilst holding down Command(⌘)- option (⌥) double click on the Aperture Library.
    Select "repair library" from the dialogue.
    What about Frank Caggiano's questions above?
    It would be really helpful to know, how many libraries you have, and if this problem is restricted to one of them.

  • When I changed my ATT email password, I can no longer open my email in my Iphone, even after updating my password. What do i need to to do?

    When I changed my ATT email password, I can no longer retreive my email on my Iphone, even after updating my password in my Iphone. What's wrong? How do i fix it?

    make sure the outgoing (smtp server) has the updated password also. settings>mail,contact,calendars>then at account>it will say outgoing, smtp or advanced. after clicking on the smtp it will have an option to change that password, delete it and add ur new one

Maybe you are looking for