CS3 on old hard drive need help to activate

My HP motherboard failed (manu defect) the hard drive is fine and has my adobe CS3 suite on it. I bought a new laptop and tethered the old hard drive to my new computer. I try to start the cs3 but a pop up says my computer lacks an adobe llinguistic code?? I moved and lost the serial on the case. How do I use my cs3 from the old hard drive?

You probably do not use it from the old hard drive vecause the program needs to be installed on whatever machine is trying to use it... even if you intentional;ly tried to install on a separate drive the program still needs to install some ellements on the main system drive.
If you check you Adobe account online you might find the serial number there if you registered the program. You can download CS3 applications thru the following link: Download CS3 products

Similar Messages

Upgrading Hard Drive need help with making it work.

I have just begun copying my HD to a 120GB 2.5" SATA drive.
I'm using Super Duper to copy it, and I understand it will be a bootable disk.
Once it has completed copying, is there anything I need to do to make it the startup disk ?
Do I make it the startup disk before I swap the hard drive out from within System Preferences ?
Also, it is currently called Disk 2 - Will that become the name of my HD (currently obviously called Macintosh HD)
If it is, can I then change the name ?
Any help would be greatly appreciated
Thanks

SuperDuper will make it a bootable disk if that's the backup option you selected. Look at the SD feedback information. It tells you what it will do and will then show the steps checking off each one as they are completed.
All you will need to do is remove the old drive and install the new one. It should be ready to go if you did everything correctly. This includes partitioning the new drive using the GUID partition scheme, setting the format type to Mac OS Extended (Journaled), and then Erasing the drive using the Zero Data option.
Be sure to test the cloned drive before installing by booting the computer with it while it's in the external case.
You can rename the drive anything you want.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Question about hard drive, need help lol.

Hey I'm kinda new to the MacBook world and have a stupid question. I am getting a late 2009 MacBook unibody (white polycarbonate, model MacBook 6.1... I believe) I am switching the original 250gb 5400 rpm hard drive out for a Seagate Momentus XT 750gb 7400 rpm hybrid hard drive. I want to keep everything on the original hard drive and just pop the new hard drive and start fresh with Snow Leopard. I'm going to purchase the SL cd from apple but I do not have the original grey start up cd that came with it (my girlfriends little sister lost it). Do I need to call apple for that cd in order to start fresh on my new hard drive or is everything I need on the SL cd?
Also how do I go about wiping the whole computer when I put the hard drive in and use SL? I want to essentially have a completely clean laptop with a new hard drive.
Thanks for your help in advance.

The SL disc you get from Apple will do everything you need. When you nstall the new hard drive there will be nothing to wipe, the drive is the only piece of that Mac hat stores anything so you don't need to worry about that. Post back and let me know how that hybrid drive works out....I'm interested.

Partitioning a 1TB hard drive - need help!

i would like to partition a 1 terabyte external usb hard drive into the following partitions
1 partition to hold a bootable snow leopard installation (so i can reinstall via usb, install bootcamp, add stuff, etc)
1 partition to hold a tiger installation (for my ageing g5 imac)
1 (largest + what remains of the 1TB) partition formatted in ntfs to put the rest of my multimedia/documents to be read by a pc (running XP or windows 7), ps3 + xbox 360.
would appreciate some help here as i have no clue where to begin.
i am running snow leopard on a macbook. thanks!

The program you're going to need is called Disk Utility - it's under Utilities in the Applications folder in Finder.
There's a Partition tab in the utility, which is where you'll start. You'll see your external disc, which you can carve up into various pieces. It's all pretty self-explanatory from there on.

BIOS doesnt recognize SATA connected Hard Drive- need help flashing bios from bootable USB

hi
I have an envy laptop running InsydeH20 bios rev f14.
the bios doesn't recognize the internally connected hdd/ssd.
I have heard that with insyde bios', sometimes you have to unlock 'secret capabilities' to recognize hardware incl internal hdd.
but I am just trying to reflash my bios.
the problem is that I cant get into windows because it doesn't recognize my hard drive and windows doesn't allow insallation to usb connected drives.
I downloaded the patch from hp.com for my product and it actually has an option for making a bootable USB for use on the actual system, and I did this. the instructions are to just restart my computer with the bootable usb. I have tried Legacy support on and off, neither updates bios.
I highly doubt it has anything to do with the physical sata connector.
basically I need to flash my bios from bootable usb. I have done some research about making a bootable dos usb etc etc but I don't know what program to even run and how..
this is a link to my product:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
Pleeeeeaaseee someone help!!!!!!!!!!!!!!!!!!
Thanks!!

hi
I need to flash the bios of my system. the bios is not recognizing hardware and cannot boot into windows to run the bios flash for windows.
on my other comp I ran the bios update patch and chose ' install to bootable usb ' so that I could use it on my system.
cannot run on my laptop. tried booting from the media. tried allowing 'legacy' compatibility.
im running insydeH2O rev f14 right now.
here is a link to my system:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=ca&dlc=en&lc=en&os=4132&product=5400031&sw_lang=
thanks to anyone who can help!!!!!!!!!!!!!!

Upgrading hard drive, need help!

I found a good deal on a hard drive at best buy, but I'm not sure it's right... I can't a model number on any of the mac specialty sites. Could someone check out my link and tell me if it will work and if it won't what I need to be looking for in the specs? Thanks. (the more opinions the merrier!)
http://www.bestbuy.com/site/olspage.jsp?skuId=8354586&type=product&id=1176507039 848

I have just upgraded my iBook with the same hard drive.
The only issue, this happened when upgrading the hard drive on my iMac as well.
I have the MacOS 10.3 restore dvds for both computers. When you boot up from the DVD. Format the hard drive on Disk Utility. The Drive formats but isn't able to have the OS saved to it via installer. Leave your DVD loaded quit installer turn computer off. Turn on computer you can now save the OS to your hard drive.
Might be different with MacOs 10.4 restore DVDs

Replaced hard drive: need helping getting songs off ipod to itunes

I recently had to send my computer into apple for repair, needless to say they had to replace my hard drive so i lost all of my music. However it is still on my ipod, so i was wondering if there is a way to transfer it from my ipod to my computer

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in the iTunes source list change the update setting to manual, that will let you use our iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod.
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPodCopy Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

New hard drive need help

I have the dv4 and the hard drive crashed a while back. Just got a new hard drive for it and installed it and I get a blackscreen with a blinking cursor. I've read some other posts and am currently running the hard drive test through the f10 page. I have a windows 7 disk in the disk drive.wouldn't it load up automatically?
This question was solved.
View Solution.

Hi,
Try the following.
Remove the Windows 7 installation disc and shutdown the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Windows 7 installation disc. Select the Boot Options menu ( usually f9 ). Use the arrow keys to highlight the CD/DVD drive and hit enter - if prompted to 'Press any key to continue......', do so.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My girlfriend reformated her iPod as a Hard Drive, need help.

My girlfriend reformated her iPod as a Hard Drive by accedent when trying to format a Mac iPod for Windows. How does one make this iPod be reconized as an iPod again rather then as an external HD? The iPod in question is a iPod nano, 16 GB running iPod software 1.0.4

When the iPod is formatted by Apple's installer software and disk mode is enabled it will mount as a single FAT32 partition...you can store stuff on it given the remaining size left over from your music/photo files.
Sub-partitioning and playing file/formatting games on your own is unsupported and will have unknown behavior....you can try it and rerun the formatter if it gets scrwed up, but the iPod is music device first, not a generic drive that you're supposed to monkey with.
Tom

I need to move my old hard drive files to our new computer, how?

Hey I need to move my old hard drive files to our new computer. It is a SATA 3.5. Is it as simple as putting it in an enclosure and plugging it to new computer.
Can I do this at the start with the IMAC? I don't have the old computer, just the drive.

*Hi thresherman, Welcome* to Apple's Users Help Users Forums.
To go from PPC to intel the use of migration assistant is not the recommendation. The definitive solution is here from Kappy and a brody.
http://discussions.apple.com/thread.jspa?threadID=435350
Good Luck, JP

My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

I think how you understand the value of having backups. All you can do is:
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens.

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!

were you able to get help on this? I need help on error 5002 as well. thank you

Any MAC genius there? I need to copy programs from my old hard drive to my new one.

Recently, I changed my hard drive because it's already broken for about 6 months. I started off fresh, no programs and files. I need some of the programs like my Photoshop CS6, I also need my Microsoft Word. And I'm coming back to school next week, and I need both of these applications. I still have my old hard drive, I can still access on my old hard drive but I have to shut off my computer. Plus my old hard drive is doing the death clicks, so I can't always carry my old one to school.
I really need the applications.
And also, I can't find my serial numbers. I don't know where the box and sticker went, and I list my email address that I used on them. Can someone please help me, I'm desperate.
Thank you in advance.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

Old Hard drive crashed, need to transfer music from iPod to new computer

Hello. My old hard drive crashed and I bought a new computer. Unfortunately I did not back up any files from my old computer and lost all files including iTunes music. All I have is the music from my iPod. I would like some help or if anyone knows anything about how to transfer the music from my iPod to my new computer. I guess my new computer is not the original authentic one in the itunes system and will not let me exchange music from my iPod to new computer. I would appreciate help if anyone has ideas. Thank bunches.

Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

CS3 on old hard drive need help to activate

Similar Messages

Maybe you are looking for