Cs3 only showing files in the Navigator Window - can't edit?

Hi there!
I have CS3, using Windows 7.
A little over a week ago, I had to re-install cs3 when i could no longer open any files.
Images only show up in the Navigator window and I can see the image's histogram.
However, no image shows in the main window, even after changing display modes, etc.
When I did the re-install, we were back to normal operations, but after about a week and a half
of use, I'm back to the same problem???
I could re-install again, of course, but I'd love to know if there's another solution to this problem.
I'm using a licensed version...purchased by me, from adobe in '07.
Thanks so much for any information! I appreciate any help!
Michelle

hey bart! thanks for your reply!
i tried that and nothing changed,
but i did check my display settings and somehow was
over on a dual monitor?
i only have one monitor and
i never messed with that setting.
plus, i was able to see images one minute and not the
next, so i'm not sure what's going on with it...
but, i changed to single monitor and it's working again!
if anyone knows why that happened, please lmk.
thanks again!

Similar Messages

I have multiple monitors. So I usually have 2-3 Firefox windows open.. Recently my addons are only showing up on the first window open.. No bookmarks or anything on the second window.

This just started a couple days ago. Can't pinpoint it to anything...

OK on the iMac now but not sure how to send the System Details. Any help welcome.

When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

When I attach a file to outgoing mail it shows up in the body of the e-mail. How can i make it only show up at the end or elsewhere?

Edit > Attachments > Insert Attachments at End of Message. If a new message is the active window, the option applies only to that message. If you don't have a new message open, then the option becomes Always Insert Attachments at End of Message.

When I download something from the Web, the "Downloads" window opens, but the window remains blank. Before it used to at least show the name of the file and I could open the file from the "Downloads" window. Is there a way to get this functionality back?

I'm running Windows XP which is updated to latest version (which I think might be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine so most of the stuff I download comes through sites found through Google, which is also updated.
At some time in the past (maybe a few versions ago) when I would download a file from the Web, the "Downloads" window would open and in the window would be displayed the name of the file I was downloading or had just completed downloading. I think I used to be able to then click on that file name and the file (or the installation file if needed to start the new program) would open. I am currently using Firefox 5.0 (the "About Firefox" screen says this is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it always has in the past, but it remains blank, i.e., nothing appears in the downloads box. I don't remember making any configuration changes, etc., that may have caused the window to remain blank, but I could be mistaken. I know how to find the items I've downloaded (My Documents / Downloads) and can usually guess what the name of the downloaded file might be, but it used to be much easier when something (anything) showed up in the downloads window.
I'd love for someone to tell me about a simple fix for this. I'm willing to be quite embarrassed that I did something I shouldn't have.'''

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

Sounds as if you used Microsoft software to make a PDF. If so, and you didn't use Adobe Acrobat ($$), then you need to get help with Publisher -- Adobe Reader only shows what you make.

Why my form doesn't fit in the navigator window?

Why my form doesn't fit in the navigator window?.
When I execute the form from navigator the form appears in but the size is less than the size of the explorer and shows shows vertical and horizontal scrollbars. What can I do to avoid this?, Is there any solution different than modify all my forms?, Is there any way to configure my navigator?
Sorry if I'm slighty off topic

We also faced this problem but now we have made changes in formsweb.cfg file by setting SeprateScreen=true value and restarting form server.
This will open forms in new window instead of same.
I hope this will work for you also.

How to open KM file in the same window

When we open KM file by /irj/go/km/docs/... link it is previewed in a new Internet Explorer window.
We changed Targed property to Self for iView navigation in LayoutSet render but the image file is still opend in new Window.
How to workaround this?

We changed Target Window Type property value of ResourceRenderer of Navigation iView to Self.
When an authenticated user tries to open KM file it is opened in the same window if file URL include /irj/servlet/prt/prtroot....
If file URL contain /irj/go/km/docs/.. it is opened in new window.
When an anonymous user tries to open KM file it is opened in a new (popup) window.
We need that anonymous user can open km files in the same window.
How to work around this?
We use light framework.

How, on the ipod touch 5th gen, can you get rid of songs in the songlist? I restored from a stolen ipod touch 4th gen, and now there is a bunch of crap that is not even mine on this thing. The songs only show up in the songs listing.

I had my last ipod stolen, when I got the 5th Gen I restored from my old ipod from itunes and now there is a bunch of crap on there that I don't want, but the songs only show up on the ipod so I can not delete them off of the ipod from itunes. Any quick fixes to remove the unwanted songs, or do I have to start over completely?

Do they play on the iPod?
If not then they are corrupted.
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
If the other is larger than about 1 1/2 GB that indicates corrupted file.

Why can i see only one picture in the illustration windows with iTunes 10.5.1?

why can i see only one picture in the illustration windows since iTunes 10.5.1?

Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
I've developed a quick workaround, and am still hoping Apple will fix this!
Go To Get Info on the tune you want to see secondary artwork for.
Go To the Artwork tab
Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
you end up with a lot of jpgs on the desktop to discard!

Connect macbook pro and imacac shows up in the finder window under shared b

I have turned on file sharing on both. My imac shows up in the finder window under shared but the macbook won't connect. Is there something else i need to do?

Same problem. Let me know if you find anything please. Thanks.

Preview doesn't show up in the capture window

When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

CSV file replacing the parent window

Joined: Dec 16, 2011
Posts: 5
posted Friday, December 16, 2011 3:35:15 PM
0
Hi,
I'm trying to download a .csv file from my web application using Content-Disposition
here is my code
response.setContentType("application/octet-stream");
filename = filename.concat(downloadType);
response.setHeader("Content-Disposition","attachment; filename="+filename+";");
//response.setHeader("Content-Disposition","application/octet-stream; filename="+filename+";");
String source = (String)ivHttpRequest.getAttribute("downloadFile");
if(downloadType.equals(".txt")) {
source = Utils.decodeHtmlEntities(source);
byte [] byteArray;
if(source == null)
// use ivRequest instead
String source2 = (String)ivRequest.getAttribute("downloadFile");
if(downloadType.equals(".txt")){
source2 = Utils.decodeHtmlEntities(source2);
byteArray = source2.getBytes();
else
byteArray = source.getBytes();
ServletOutputStream out = response.getOutputStream();
out.write(byteArray);
out.close();
I'm able to download the file in all the browsers, But while using IPAD the content of the file replaces the existing window (Parent Window) without asking for Save or Open option.
Please let me know is there any special content type or anythinmg else i have to change.. So that i could be able to open the csv file in a new tab without replacing the parent window.The problem i faced only with IPAD

You are probably better off asking in the developer forums : https://devforums.apple.com/index.jspa

How to Set JFilechooser to show file with the same extension in the filetyp

How to Set JFilechooser to show file with the same extension in the filetypes??
help

I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
The introduction shows an example of how to do that.

Whenever a download is finished, my windows toolbar unhides itself. Only after clicking on the download window does it autohide itself again.

I have my windows (7.0) toolbar on auto-hide so that it doesn't clutter up my screen. But whenever I download a file with Firefox, the download window triggers the toolbar to pop up. Only after clicking on the download window does the toolbar rehide itself. Is there a way to get the download complete event to not trigger a windows event (or whatever it is that causes the toolbar to pop up)?
== This happened ==
Every time Firefox opened
== I downloaded files

The showAlertOnComplete didn't work. I downloaded and installed the download manager program and that seems to have done the trick.
Thanks

[kde] "Only show tasks from the current desktop" doesn't work for max

Hi,
I have two monitor setup (laptop + main monitor) and I would love to use "Only show tasks from the current desktop" option in KDE Task Manager but for some strange reason it doesn't work for me. Well, it works but only partially - for restored/unmaximized windows. When I maximize one it appears on the Taskbar on both screens. Is this normal? May it be due to the fact that I've placed Taskbar on top of the screens?

Did you miss this bit
"Graphics : 1 GB NVIDIA Quadro 600 (1DP & 1DVI-I) (1DP-DVI & 1DVI-VGA adapter) (ELGA13) 1"
And the final image clearly states the type of Graphics Card he has
Photoshop CS6 GPU FAQ
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB of VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows & Mac OS)

Cs3 only showing files in the Navigator Window - can't edit?

Similar Messages

Maybe you are looking for