CS3 Overlapping fill in one object cancels out the fill color, how do I fix this?
I have a closed object filled with black which overlapps itself, this overlapp as we all know turns white. How do I get rid of this "white" area in the overlap?
I am fairly proficient in llustrator CS3, but can't figure this out.
Thank You Wade, and Doug! Both your answers fixed my dilemma. I've never worked with the Attributes Panel before, and therefore my default was set to " Use Even-Odd Fill Rule" In Freehand, this wasn't an issue for me. This just saved me TONS of time! And, no I don't actually want to make it a compound path, not for my use. I knew it had to be a simple fix, but without the proper terms, I was lost even using the "help" in Illustrator. WooHoo!
Similar Messages
-
When I burn a disk from my playlist the songs are out of order. How can I fix this? Thanks!
When I burn a disk from my playlist the songs are out of order. How can I fix this? Thanks!
I'm not 100% sure but I think you create your play order manually then select the playlist, right click it (or use ctrl+click) & select "Copy to play order".
I think when you burn that playlist it should obey that order, it has been so long since I made a mix CD that I'm not certain, good luck. -
My photo stream stopped syncing after photo 216 out of 1000. How can i fix this?
My photo stream stopped syncing to my pc after photo 216 out of 1000. How can i fix this? I've already tried switching folders in the icloud PC program and closing the camera on my iphone.
Although it not only bothers me but alot of other photo booth users aswell
-
I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy. How can i fix this?
mr
Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
Is your video card/graphics card driver up to date according to the manufacturer of the card?
Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
Where player are you using for the playback of these exports?
Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
More later.
ATR -
when downloading ios 5 to my itunes an error message saying "the network connection has timed out" keeps popping up. how do i fix this?
Temporarily dip ****.
And excluding the extremely high network traffic due to the many millions of users downloading the update a day or two after is was released, this is a problem with that swiss cheese for security garbage OS that is Windows only, which is the joke. An update that is now running on 1 in 3 compatible iDevices which is in the 10's of milllions is vaporware Einstein?
If I were your rep, I would tell you to **** off. Go get Windoze mobile devices. -
When trying to import videos off of a CD I continually get error code -36 on one of the videos. How can I fix this?
Contact Apple and request a 10.4 or possibly a 10.5 distribution disk for this system, if you've not obtained that DVD disk from the seller.
Boot and use that distribution disk to wipe the hard disk via Disk Utility, and to then reinstall OS X.
Best to start with a fresh installation of OS X, as that'll provide the default environment and not something that's been customized and extended by the previous owner.
The last OS X version that was supported for most PowerMac G5 systems was 10.5.8, and that would be preferable — if your Mac supports that.
If you're not sure which Mac you have, then use the > About This Mac from the menu and request more information on the system. You're looking for a model number listed there, and that'd be something like PowerMac7,3 or PowerMac11,2 for a ~2005-vintage PowerMac system. Whatever model number you have can then be used to determine the general specs for the configuration, and what the last version of OS X that was supported for the system. -
I am trying to restore with icloud on a new ipad. WHen I get to iCloud Sign In, it keeps timing out. Why and how can I fix this?
Sign out of old email and sign in with new.
-
I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this? HELP
about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755
settings - message - imessage - is turned ON? Do you have it activated?
Make sure you have a good wifi or cellular data connection.
Also you can only imessage other apple products who have imessage on. -
i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes
If you aren't in a country where you can re-download music or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I have to reload a webpage to make a Flash Object in IE7 WinXP SP3. How can i fix this problem?
Hello:
When I want to navigate a webpage that contains a flash object, the Internet Explorer show the icon that the page contains an error, if I relod the page, the page now doesn't show the error and the Flash objects work well. This occurs recently, some weeks ago, I didn't have that problem. How can I fix this problem?
I'm using Win XP SP3, IE8 and Flash 14.0.0.145
I tried to uninstall the 14 version and installed the 13 version but the problem persists.All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere. -
I recently bought some christmas ringtones. And i noticed after a day or so that the ringtone just disappeared. So i re bought it. That disappeared as well, so i bought another one.. well you see the pattern. But i sync'd my phone up to iTunes and they are on there, they are just greyed out with a circle of dots next to it. How do i fix this issue so i can have my ringtones, and songs, back onto my iPhone 6.
Thanks !There has been a issue with ringtones and apple knows about it and is working on fixing it.
Apple is advising customers not to repurchase ringtones and if you did, just give them a ring and they will refund you.
Until then don't purchase any more ringtones at least until the next update.
You can request a refund by going to the Account section within iTunes on a Mac or PC, or you can get help by chat, or contact Apple Care.
Phill -
why are some of the songs on the play list I am trying to burn to a CD "grayed out" when I start burning the CD and there for not included in the finished CD? How can I fix this problem. Btw, I have been using iTunes for years and this problem just came up quite recently. Thanks
Howdy sarthur,
Thanks for using the Apple Support Communities.
To help resolve this issue where you're unable to burn a disc successfully in iTunes, please follow the troubleshooting in the article linked to below.
Can't burn a CD in iTunes for Windows - Apple Support
Take care,
Alex H. -
My Flash Player is "out-of-process." How can I fix this.
Good Morning,
I have the latest version of Flash Player and am running it in Google Chrome. Have been trying to play Facebook games but they do not function properly. I have tried several times to delete the data but this does not help. However when I go into my control panel to delete I see a message that the version of Flash that I have is not compatible with Chrome. And when I go into Chrome:plugins I see the Player but in Parenthesis it says: out-of -process. Could one of these be my problem or would it be something else. Here is a description of how the games function. Most of them run slowly. One in particular, Gardens of Time, tends to freeze. I then must get out of the game and go back in. Hopefully someone can help me fix this! Thank you.Flash Player for Chrome is a built-in component of Chrome. There's nothing separate to install or manage. It's also totally isolated from the control panel stuff. Out-of-process is a good thing (this means that Flash can crash without taking the whole browser down), and is how it's supposed to work.
So it sounds like there's a crash on the game. It's probably that Flash is just running out of memory. If you have 32-bit Chrome (it will say on that About Chrome screen), you might want to uninstall Chrome entirely. You should get the 64-bit version of Chrome on the next download. Depending on how much RAM your computer has, this may improve the situation significantly.
You might also be able to work around the issue using a different browser. Each major browser uses a significantly different variant of Flash Player, so it might be specific to Chrome. Either way, it's an interesting data point.
I'd like to try and reproduce the hang that you're describing, but it would be helpful to narrow things down a bit -- if you could give me some more details about your computer and browser, that would be really helpful:
https://forums.adobe.com/message/5249945#5249945 -
Itunes grayed out on my iPhone how do I fix this?
Today the apple store replaced my malfunctioning iPhone 4 free of charge. I thought this was fantastic, however, I've come to realize that many of my itunes are not syncing? When I enter the itunes icon on my phone it says that I have 238 songs waiting to transfer, then when I get out of the app and back in again it tells me I have 436? How do I fix my problem?
Hey Brianasurfergirl,
If your Wi-Fi is grayed out, these are the recommended steps:
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
via: iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
I crossed off the one you had already mentioned doing. I would start off with these and see if it resolves both the Wi-Fi issue and the cellular issue as well.
Take care,
Delgadoh -
System interupts hogging one core of the processor. How can I fix this?
A week or so I noticed that system interrupts was using a significant percentage of my processor all the time. Upon googling the issue I found that it is most likely a hardware driver error. I have done a in place reinstall or upgrade of the following drivers:
graphics, chipset, audio, network cards, hard drive, BIOS, and CD/DVD drive. I have also gone through Device Manager and one by one disabled devices that had the option to be disabled, except for the devices under the sub-menu system devices, in order to try
to find out what device maybe causing the problem. However, nothing has worked so I am turning to the forums for help. It seems like after restarting my computer it takes a day or so for the problem to reoccur.
I have ran both AVG fullscan and malware-bytes full scan, in and out of safe mode.
Thanks in advance.1. If you don't mind, could you briefly explain what part of the photo led to this? I always like to learn when possible.
2. I cant check if that will work right now because at the moment the problem is not occurring. Previously it had seem the problem occurred about 6 hours after I had restarted the computer, and only went away after a restart. Last night the problem was occurring,
however this morning it has gone away without any restart. Once the problem reoccurs I will see if this works and get back to you
3. You had asked if I had checked any event logs. Here is a list of the only errors I could find during a time which I know the problem was occurring. Thanks.
Log Name: Application
Source: gupdate
Date: 4/17/2014 8:55:34 AM
Event ID: 0
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
The description for Event ID 0 from source gupdate cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Service stopped
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="gupdate" />
<EventID Qualifiers="0">0</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T12:55:34.000000000Z" />
<EventRecordID>115187</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Service stopped</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:15 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledSPRetry 9032
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:15.000000000Z" />
<EventRecordID>115186</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledSPRetry 9032</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:15 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledEvent 9032
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:15.000000000Z" />
<EventRecordID>115185</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledEvent 9032</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:15 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: Continuously busy for more than a second
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:15.000000000Z" />
<EventRecordID>115184</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: Continuously busy for more than a second</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:13 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledSPRetry 6895
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:13.000000000Z" />
<EventRecordID>115183</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledSPRetry 6895</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:13 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledEvent 6895
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:13.000000000Z" />
<EventRecordID>115182</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledEvent 6895</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:13 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: Continuously busy for more than a second
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:13.000000000Z" />
<EventRecordID>115181</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: Continuously busy for more than a second</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 4/17/2014 3:05:11 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: inspiron620
Description:
Task Scheduling Error: m->NextScheduledSPRetry 4805
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-17T07:05:11.000000000Z" />
<EventRecordID>115180</EventRecordID>
<Channel>Application</Channel>
<Computer>inspiron620</Computer>
<Security />
</System>
<EventData>
<Data>Task Scheduling Error: m->NextScheduledSPRetry 4805</Data>
</EventData>
</Event>
Maybe you are looking for
-
Solaris 8 to Solaris 10 upgrade for oracle 11i
Hi Need to upgrade my 11i (11.5.9) apps from Solaris 8 to Solaris 10 It will also be a 32 bit to 64 bit conversion Has anyone done this before. or can specify the any major obstacles. Thanks
-
I would like to ask whether anyone knows of any true explanation for why the iPhone 5 starts at $199 in the US and £529 in the UK? That is more than a £400 discrepancy... iPhones are duty free and even with a $50 shipping fee it would only come to £1
-
Freehand files aren't recognized by Illustrator CS6?
Am I only the one with this issue? This creates a huge bind after signing up for the full CS6 Creative Cloud service when I have hundreds of archived Freehand vector client jobs that I still refer to by dragging the files into Illustrator. After CS3,
-
Photos on iPad shown from oldest to newest without possibility to change it
I have photos on my iPhoto and iPhone shown chronologically from newer to older, so I can always see the newest photo on the TOP, but I don't know why on the iPad the opposite thing happens. I have them shown with the oldest ones on TOP. Is there any
-
CMYK oversaturated on NEC 3090
I'm using a new NEC3090WQXi with Photoshop CS4, working RGB of Adobe'98, and working CMYK of US Web Coated (SWOP) v2. Changing from RGB to CMYK under the above settings, the CMYK values represented on the above display are oversaturated and not in sy