CS3 plugins needed: worldready and conditional text plugins to open files

I have CS3 Creative Suite and I created a digital portfolio that will not open on my new computer because it says a worldready plugin and conditional text plugins are needed. I called the adobe hotline but they said since it's CS3 they do not have support for my issue and that I would need to update to CS5. If someone could please direct me in the right direction it would be extremely appreciated.

You are trying to open a file saved in a more recent version of InDesign. If it was only those two plugins listed it's a CS4 file. The file will need to be opened in the correct version and exported back to .inx through CS4 (CS5 files need to be exported to .idml before they can be opened in CS4). Unsupported features will be lost and text may reflow du to differnces inthe text engins from version to version.

Similar Messages

  • I have a PDF with a diagram, I need to translate the text so I open it in Illustrator.  The document opnes up vertically oriented  I try to put it horizontal to be able to read and change the text  However everything I have done is not working  The artboa

    I have a PDF with a diagram, I need to translate the text so I open it in Illustrator.  The document opens up vertically oriented  I try to put it horizontal to be able to read and change the text  However everything I have done is not working  The artboard does change, but the diagram stays vertical.....Please help  I need to finish that for today..Please help

    A PDF usually consists of one to an indefinite number of clipping masks inside each other.
    You need to be very carefull with selecting stuff.
    So you need to read the manual on how to select stuff and on the basics of Illustrator.
    On top of that: because of the complex hierarchy of PDF files, it is kind of difficult to help you without seeing anything.

  • Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

    I have the following inside my SharePoint server 2013 :-
    EnterPrise Wiki site collection.
    i have both "Excel services Application "& "Visio Graphics Service" running correctly.
    The problem i am facing is as follow:-
    when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
    but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
    Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
    To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
    I have the following settings inside my PC:-
    Office 2010 for Excel, word, power point,etc.
    Visio 2013.
    i have disabled SharePoint foundation support for office 2013
    Can anyone advice on this please?

    Hi,
    Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
    If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
    Here is a blog about the same issue for you to take a look at:
    http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
    Best Regards
    Dennis Guo
    TechNet Community Support

  • I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

    I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160  when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes  how do I make the layers and tool bars bigger?  Please help@

    Windows will scale applications display or windows will not scale application display depending on how the application is coded.  Photoshop is coded in a way that its display is not scaled by windows.  Photoshop knows about your displays high pixel count not its resolution  so it uses its pixels  however it does not scale its UI to make it usable on your display.  Other application let Windows  scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels.  The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays  2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
    The reg update  and external manifest file  effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size  in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution.  Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768.  Photoshop UI would not fit on the Surface Pro 3 display..
    Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display  3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

  • Terms and conditions for plugin for B2B?

    Hello Community,
    we are developing a commercial plugin for Adobe InDesign for B2B.
    For this purpose we need some information about how to write terms and conditions for Adobe InDesign plugins. Which requirements should we write in the terms and conditions? If Adobe InDesign CC is expired, the plugin can’t also be used? Are there anybody who have useful terms and conditions for such plugins or which plugin company use some useful terms and conditions?
    regards,

    There are not many developers here. Try the InDesign SDK forum where you'll find more developers.

  • Why do i need three? - Google Talk Plugin, Google talk plugin video renderer and Google talk plugin video accelerator?

    When I check my plugins, the following three, very closely related (in my mind) plugins are listed, and the "Renderer" still shows "Research" when checking to see if it is Up-To-Date. It seems to me I don't need all three. I tried removing the Renderer (yes, I know how to do that safely), but Google seems to continue to reinstall it (with one or both of the other two...?)...I'll ask this on a Google Forum too, since it's their product, but wondered if anyone has any insight. I obsess about plugins that need "Research" - Thanks!
    Google Talk Plugin Video Accelerator version:0.1.44.24
    Google Talk Plugin Version 3.15.2.12038
    Google Talk Plugin Video Renderer Version 3.15.2.12038

    Went to Google Talk Help and found advice to remove the "googletalkplugin_port file on [my] computer."
    http://support.google.com/chat/bin/static.py?hl=en&page=known_issues.cs ... and click "Voice and video plug-in unrecognized" under "Currently Known Issues"....
    Now, the only Google Talk plugin I have in Firefox is
    Google Talk Plugin Video Renderer
    Version 3.15.2.12038
    ...but it does indeed remain "Unrecognized" by Mozilla/Firefox...

  • Sections and conditional text

    Hello.
    I work with technical documents that are translated into 5 languages. This documents have 16 main sections. I would like to put, in the footpage of any page, the name of the section. I know that I can enclose this 16 sections with the Numbering and sections options, but just in one language. I would like to put in the section marker name some conditional text (1 label per language): Introduccíón (spanish) Introduction (english) and so on. Is it possible?
    Another easy way to do it? I wouldn't like that the translators have to translate every section marker in every document. I want to make it automatic.
    Another option is create 16 master pages (one per section) and put on it conditional text, but I don't want 16 master pages.
    Any ideas?
    Thanks in advance.

    Sorry but I can't explain it as clear as I would because english is not my mother tongue.
    Yes, this sections have a title. For example, the point 1 is "Introducción" and I want that, in the footpage of the Introducción pages, put "Introducción" atutomatically. With the point 2, 3, 4, and so on, the same. Then, when I send it to our translators, they generate a new document in the target language based on the original. It would be nice if they translate those titles (Introduction, etc) automatically the footpage is updated.
    This book documents are divided in 3 .indd files: 1 per front cover and index. 1 per the body of the document. 1 per the back cover. I want this footpage just in the second .indd file.
    I use conditional text for some facts. For example, if you choose the label USA, you will see in the footpage "Instalation manual". If you choose Spain, you will see 'Manual de instalación'. In my first post I was talking about conditional text because I'm used to use it, but I can see other options.
    Thanks.

  • Lines over images and around text in Captivate SWF file

    My project works & views fine in captivate and when published, it views fine on my mac - through flash player and browsers. But when I send a swf file to the client to view they see odd lines above and below images.
    But they dont see the lines when they view the htm file within a browser - then it views fine.
    The lines only appear when there's text over an image.
    Screen shots attached.
    My captivate project was created by importing a Powerpoint document, with images and text on each slide.
    I've changed the optimisation / slide quality through prefrences and on each slide to the highest quality.
    I've also un-selected the advanced slide compression.
    Is there another thing I can try to iron out these lines?
    Some of the images within Powerpoint are stretched, would this cause the lines?
    Is it a flash player issue?
    Or a zooming issue?
    Any help is much appreciated!

    Thanks Lilybiri,
    I am a new user & just finding my way
    I understand how to publish and how Captivate creates a zipped file with a SWF, HTML, JS and CSS files etc. (Im using Captivate 7). 
    How do you send Captivate projects to clients for review / approval before you supply them with the whole project zipped file?
    So far I've been sending them the swf file to check. And have had troubles with them viewing the lines over images and around text. Even though I cant see the lines.
    I need the client to see what I'm seeing - a project without any lines.

  • JS scripted needed to add custom text plus filename to file info in document title

    Would greatly appreciate any help with this one...
    JS script to add custom text plus filename to file info in document title
    many thanks

    Super :O)
    I have a folder of say 50 images and I want to run a JS script batch
    example in the document title :  image Nr 81205
    custom text is "image Nr" +  file name "81205"
    activeDocument.info.title =" image Nr" + decodeURI(activeDocument.name);
    would this be correct without seening the file ext
    many thanks

  • Since downloading the most recent version of iTunes, I have to accept the software terms and conditions every time I open iTunes

    Since installing the most recent version of iTunes, I have to accept the software terms and conditions every time I go in to iTunes.  I sign in to my account, but when I re-open iTunes, as well as having to accept the terms and conditions before continuing, I find that iTunes has logged me out of my account.  None of this has happened before.  I am using a PC with Windows 8.

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • How can I join together a photo and a text (or other vector files)?

    Hi all.
    I'm trying to do a poster with a sort of graffiti writings on a wall but I can't reach for any kind of realism. I'd like to see the writing on the wall like it was actually written.
    I'm using a real photo behind the writings but the image and the text don't connect together, it is simply like a copy-past work. I don't know if I was clear because English is not my first language.. the effect I'd like to reach is like if the writings were printed on the wall.. but the wall is a photo so I don't know if they can be joined together..

    Sounds like you are looking to make the writing realistic. That is better done in photoshop. Some tisp you can sue
    use a blending mode on your writing so that it blends naturally into
    If your wall is made of brick for example, you can save a grayscale imageg of your weall and use displace in photoshop to distort the writng so it looks liek it is follwoing a bump mapo of the grayscale imaeg you made
    you can use a grayscale of your wall as a mask on your writing. Use a curve to brighten the mask, so most of the writing shows through, except for some edges and such you want to roughen up

  • Can I add specific text to Template via pop up text box on opening file?

    In most word processors it is possible to create a template that asks you for specific text when you open it, so that you can have the letter three quarters written within the template, and only need to replace names, addresses, date and so on.
    In Lotus WordPro for instance, before I even see the file, I have to fill in a dialogue box with the persons name, the subject of the letter, and four or five specifics unique to them. The WP then adds this info into the letter, and all I need do is to occasionally write a further full paragraph.
    How do I do this in Pages? I can't seem to find anyway to do it at all. I have a suspicion I might need Apple Script, but I'm not sure how I can do that. I have a book of how to code, but I don't know where to store the macro, nor to write it yet - the book's just there if I need it.
    I want to open the file, and then be asked one item at a time for the personalised answers to questions that occur in every report/letter.
    Any ideas?
    TIA
    Mac

    Thanks for your suggestions, Magnus, you really have had a good think for me - I appreciate that!
    What I am doing is report writing in which 90% of the report is the same for everyone. Except the cover page with Name and Address details, and Report title; the initial section which is the same for everyone except for specifics such as amount to invest, reason for investment, term to invest over, things like that.
    The end of the report is the recommendations section which is where I use freetext to create a bespoke solution - this cannot be automated.
    Just automating the cover page and the intro section save me huge amounts of time which I can then use on research and fund analysis, leaving the principles of investment section pretty much the same for everyone, as here I'm describing the principle and theory.
    After I created this Report Template my average report creation time went down from about 3 to 4 hours, to about 45 minutes. I guess the automation itself doesn't save as much time as the templating does, but it allows me to concentrate on the important bit and not worry if I have left something out - or in - that changes the overall thrust of the report.
    I cannot load Lotus WorpPro on Parallels, nor on Virtual PC, so the lack of automation really is a pain here. I see it as a weakness of Apple products for business, as I am sure Microsoft do which is why they have dropped VBA support for Office 2008.
    I have got NeoOffice as well as OpenOffice for Mac on my system, but really they aren't atable enough to use, and the formatting is pretty flaky. It certainly isn't completely consistent with Office itself.
    So, I am left with the conclusion that progress only means a reduction in features!
    But maybe I'm missing something?
    Mac

  • Dialogue box says I need a later version of Pages to open file, but I have the latest.

    When I try to open a document from icloud on my imac which I opened earlier on my ipad, the dialog box says:
    "You need a mewer version of Pages to open this document.  You can download the latest version of Pages from the Mac App Store."
    When I go to do this, I am told it is already installed.  How do I open this document?

    You have both your older version of Pages in your Applications/iWork folder and Pages 5 in your Applications folder.
    Make sure you are opening your iPad document with Pages 5.
    Peter

  • Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

    Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
    I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
    and will check online for solution. Please assist as no files will open now
    This is details of error
    Problem Event Name:    APPCRASH
      Application Name:    AcroRd32.exe
      Application Version:    11.0.10.32
      Application Timestamp:    547e9779
      Fault Module Name:    StackHash_147f
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Code:    c000041d
      Exception Offset:    77a011f1
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    147f
      Additional Information 2:    147ff66574b08dc93180d912e60eb897
      Additional Information 3:    c48b
      Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Can you open Adobe Reader by itself?  If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

  • Lion Preview and Textedit very slow when opening files from Leopard Server

    My small office (about 10 users) recently upgraded our iMac's, Mac Mini's, and Macbook Pro's.  We are experiencing a big problem with Preview opening super slow (1-2 minutes) when trying to open JPG's, PDF's, etc from our 10.5.8 Leopard Server.  We have deleted numerous plist files related to Preview, completely deleted Preview.app from one iMac and reinstalled it via Pacifist and still no change in performance.  One of the new iMac's does open much faster than the others, but we cannot figure out why this one machine works well and the others don't.
    All machines are showing the below error (dozens of times) in Console when trying to open files directly from the server...
    sandboxd:  ([###])  Preview(###) deny system-fsctl
    We have searched the internet for a solution but have not come up with anything that works.  This problem exists with Textedit as well.  We did try opening a file from one Lion machine to the other and it opened very fast.  We also can open files very quickly from older 10.4.11 Tiger machines directly from the server.  So the best we can determine right now is Lion and Leopard Server are not playing nicely together.
    Any help would be greatly appreciated.
    I have pasted (one of) the console log files below for reference.
    Preview(3364) deny system-fsctl
    Process:         Preview [3364]
    Path:            /Applications/Preview.app/Contents/MacOS/Preview
    Load Address:    0x102c9a000
    Identifier:      Preview
    Version:         ??? (???)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [114]
    Date/Time:       2012-04-24 13:28:40.470 -0700
    OS Version:      Mac OS X 10.7.3 (11D50d)
    Report Version:  7
    Backtrace:
    0   libsystem_kernel.dylib                  0x00007fff922a0516 fsctl + 10
    1   AppleShareClientCore                    0x0000000105629f4a afp_getMountURL + 112
    2   afp                                     0x0000000104e7fe03 AFP_GetMountInfo + 161
    3   NetFS                                   0x00007fff8a17c295 NetFSGetMountInfo + 147
    4   NetFS                                   0x00007fff8a17e08f GetCompleteMountURL + 68
    5   CoreServicesInternal                    0x00007fff86ef1e51 _ZL29addVolumeInfoForURLToBookmarkPK13__CFAllocatorR19BookmarkMutableDataPK7__C FURLmjPK9__CFArrayPP9__CFError + 1535
    6   CoreServicesInternal                    0x00007fff86ef12fb _ZL28createBookmarkWithURLAtDepthPK13__CFAllocatorPK7__CFURLmS4_PK9__CFArrayR19 BookmarkMutableDatajbPP9__CFError + 3230
    7   CoreServicesInternal                    0x00007fff86ef2443 _CFURLCreateBookmarkData + 1309
    8   CoreFoundation                          0x00007fff8d1e3219 -[NSURL bookmarkDataWithOptions:includingResourceValuesForKeys:relativeToURL:error:] + 105
    9   Foundation                              0x00007fff91b72fbf -[NSURL(NSURL) encodeWithCoder:] + 239
    10  Foundation                              0x00007fff91b2e4ed _encodeObject + 1120
    11  Preview                                 0x0000000102cdfb4d
    12  AppKit                                  0x00007fff90975f0b -[NSWindow encodeRestorableStateWithCoder:] + 316
    13  AppKit                                  0x00007fff90974a00 -[NSPersistentUIRecord generateArchive:] + 177
    14  AppKit                                  0x00007fff90975937 recursivelyEncodeInvalidPersistentState + 525
    15  AppKit                                  0x00007fff90973ccc -[NSPersistentUIManager flushAllChangesOptionallyWaitingUntilDone:updatingSnapshots:] + 1128
    16  AppKit                                  0x00007fff90973836 -[NSPersistentUIManager flushPersistentStateAndClose:waitingUntilDone:] + 182
    17  AppKit                                  0x00007fff90973714 __-[NSPersistentUIManager acquireDirtyState]_block_invoke_1 + 53
    18  libdispatch.dylib                       0x00007fff8a79b2b6 _dispatch_source_invoke + 635
    19  libdispatch.dylib                       0x00007fff8a797f77 _dispatch_queue_invoke + 71
    20  libdispatch.dylib                       0x00007fff8a7986f7 _dispatch_main_queue_callback_4CF + 257
    21  CoreFoundation                          0x00007fff8d0da06c __CFRunLoopRun + 1724
    22  CoreFoundation                          0x00007fff8d0d9676 CFRunLoopRunSpecific + 230
    23  HIToolbox                               0x00007fff86aa731f RunCurrentEventLoopInMode + 277
    24  HIToolbox                               0x00007fff86aae5c9 ReceiveNextEventCommon + 355
    25  HIToolbox                               0x00007fff86aae456 BlockUntilNextEventMatchingListInMode + 62
    26  AppKit                                  0x00007fff90918f5d _DPSNextEvent + 659
    27  AppKit                                  0x00007fff90918861 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
    28  AppKit                                  0x00007fff9091519d -[NSApplication run] + 470
    29  AppKit                                  0x00007fff90b93b88 NSApplicationMain + 867
    30  Preview                                 0x0000000102c9bdb4
    Binary Images:
           0x102c9a000 -        0x102e7efef  com.apple.Preview (5.5.1 - 719.16) <EE12E506-F88C-319F-A2B4-5EF997884F0C> /Applications/Preview.app/Contents/MacOS/Preview
           0x104e7f000 -        0x104e86fff  com.apple.URLMount.AFPPlugin (4.0 - 4.0) <91C71C5D-562D-37C4-9131-6E6F086288DE> /System/Library/Filesystems/NetFSPlugins/afp.bundle/Contents/MacOS/afp
           0x105618000 -        0x105664ff7  com.apple.AppleShareClientCore (2.5 - 2.5) <CC62F28C-398E-35E2-B2C0-B85A02E57247> /System/Library/Frameworks/AppleShareClientCore.framework/Versions/A/AppleShare ClientCore
        0x7fff86aa5000 -     0x7fff86dcfff7  com.apple.HIToolbox (1.8 - ???) <D6A0D513-4893-35B4-9FFE-865FF419F2C2> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
        0x7fff86eec000 -     0x7fff86f17ff7  com.apple.CoreServicesInternal (113.12 - 113.12) <C37DAC1A-35D2-30EC-9112-5EEECED5C461> /System/Library/PrivateFrameworks/CoreServicesInternal.framework/Versions/A/Cor eServicesInternal
        0x7fff8a17a000 -     0x7fff8a181fff  com.apple.NetFS (4.0 - 4.0) <433EEE54-E383-3505-9154-45B909FD3AF0> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
        0x7fff8a795000 -     0x7fff8a7a3fff  libdispatch.dylib (187.7.0 - compatibility 1.0.0) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
        0x7fff8d0a1000 -     0x7fff8d275fff  com.apple.CoreFoundation (6.7.1 - 635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff90910000 -     0x7fff91514fff  com.apple.AppKit (6.7.3 - 1138.32) <A9EB81C6-C519-3F29-89F1-42C3E8930281> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
        0x7fff91ae2000 -     0x7fff91dfbff7  com.apple.Foundation (6.7.1 - 833.24) <6D4E6F93-64EF-3D41-AE80-2BB10E2E6323> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
        0x7fff92289000 -     0x7fff922a9fff  libsystem_kernel.dylib (1699.24.8 - compatibility 1.0.0) <C56819BB-3779-3726-B610-4CF7B3ABB6F9> /usr/lib/system/libsystem_kernel.dylib

    "Enable Related Files" isn't the fix for this issue. It's slightly different - I wanted to still load related files, but only the ones local to the file I was editing.
    The fix was to use DW's Resolve To IP Address feature. It required adding a registry value - it fixed the issue straight away
    This Adobe support doc helped: http://kb2.adobe.com/cps/887/cpsid_88742.html

Maybe you are looking for