CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.

Got mine FIXED here is what i did:
Windows 7 64bit SP1, CS 5
Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
Tried activating through Suitcase Fusion 2 and also through FontExpert 2009 - but neither of them made the fonts visible in CS5 apps
1) open Start Menu/Control Panel/Fonts
2) on the sidebar there is "Font settings" item
3) set the settings as i did
[ ] Hide fonts based on language settings
[ x ] Allow fonts to be installed using a shortcut (advanced)
FIXED mine,
now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING

Similar Messages

Cs3 serial number not accepted when installing cs6 as upgrade

I downloaded photoshop cs6 after paying for it as an upgrade from photoshop cs3. During the installation it asked me for the serial number for cs4 or cs5 but not cs3. It would not accept the serial number of my cs3. A look at other forums suggests the only way round this is to hack in as if I was doing an illegal download. When I installed on this computer, the help Desk took over my computer and had a lot of trouble overriding the problem. I now have a new computer and am having the same problem in trasferring cs6 to the new computer. Unfortunately I have deactivated cs6 on this computer and at present cannot use it at all.

Contact Support team to sort this out.
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

Fonts not available in IDCC2014, with Suitcase Fusion 5 or 6

I have opened and worked a InDesign CC2014 doc. Everything is fine. The next day I attempt to open the doc again with the same fonts installed and they come up missing. I try several Macs, (different OSs), different versions of Suitcase Fusion including the latest and I get the same issue. Cleared font cache, restarted, etc to no avail. Any ideas? This has happened over the years occasionally, and has seemed to happen recently on a few occasions.
Thanks

That's a large part of the problem. You have more than one font manager on your Mac. If you're not using Font Book, delete it. Then you need to reset its orphaned database so OS X stops trying to control which fonts are, or aren't active according to that data.
To remove Font Book from the hard drive, follow these steps:
1) Open Font Book, and then its preferences. Uncheck the box for "Alert me if system fonts change". Close the preferences and shut down Font Book. Put the Font Book application in the trash and delete it.
2) Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding it until OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally.
This will reset Font Book's database and clear the cache files in your user account. The main goal in this step is to remove the orphaned Font Book database from the hard drive. With the Font Book application no longer on the hard drive, a new one cannot be created. Which is what we want.
3) Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
This removes all font cache files. Both for the system and all user font cache files. After running the command, close Terminal and immediately restart your Mac.

Office Communicator 2007 R2 IM not visible when in Chating with Group (Communicator Group)

Hi,
We are facing a issue when user IM is not visible when he chats with the group which he created in his Office Communicator Client.
Whereas he can send IMs to individual who is a member of that group in the same time.<o:p></o:p>
Need any suggestions on this.
Thanks in advance.

Hi,
Please check if there is any error message on OCS Server.
Please also check if all OCS Services on OCS Server started as well.
Please try to check the following link:
http://support.microsoft.com/kb/980043
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

JTree not visible when compiled

I have a problem that my JTree is not visible when i export my project to jar file.
along with a button also. I have no idea why this may be happening so maybe some of you guys have heard of this before ?
the JTree is visible when running in Eclipse etc
any ideas?

JTrees shouldn't be visible when you compile, they should be visible when you run the application :)

Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Hi Guys,
I am facing very critical issue on down Payment request, to process with saperate Tax Value.
We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
Below is the error message:
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206

HI Preeti,
Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
Did any one seen this case in your experiece, if yes, what is the work-around solution?.
Need your help guys!,...
Regards,
Damodar Naidu

Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

Issue: I am encountering a problem entering Taxes when applying down payments received from customers since we are using a jurisdiction code taxation procedure. This process works as desired in Europe for our firm. I found OSS 97288 which is not valid for version ECC 6.0. Please assist due to US go-live in 2 weeks.Process: Create Down Payment Request for cash in advance. Required to tax at this point. Billing document creates a noted item in the G/L (Special G/L). I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
Settings: 1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross." 2) Transaction OBXB specifies tax clearing account for transaction key MVA. This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
Thank you in advance!

Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

TS1506 My attachment symbol is not visible when I am sending an email. How do I get it back?

Attachment option is not visible when sending an email through aol.com.

When you are composing an email tap at the location you want to insert a photo or video. The option to insert comes up. Tap on that and select the photo or video you wish to insert.
Alternately you can use the Photos app and select up to five photos to insert into an email. Tap select, select the photos and then tap the Share icon. Select Mail and an email will be created. You can then address the email, add a subject and type in content.
To attach other things like a PDF, Word Doc, etc. you need to use the app that creates or edit seize items. Again select the item you want to email and tap on the Share icon in the appropriate app.

Field not visible when uploading the file in application ser

Hi,
I have added a new field at the end of a structure and When i upload the data in the application server it is not visible there. The new field length is 30chars(say field 'A') and the one just before this one is 250 chars(say field 'B'). When i reduce the length of field 'B' to 30 chars or 40 chars the value which i populated in field 'A' is visble in the output file.
Since the complete file was not visible in AL11 transaction, i used the CG3Y tcode as well to download the data to presentation server so that i can view the complete file. Even after downlaoding in presentation server the new field value is not visible.
Can anyone please suggest why is the value in field 'A' not visible when the length of field 'B' is 250 chars? Also, how can i display the value of the new field in the application server.I cannot change the layout of the structure as per the requirement. Any help will be very useful.
Thanks in advance,
Sneha.

Hi Sneha.. Happy new year
<you subject is missing ver from the server, thats why your server doesnt like you :P>
-ok, lets go step by step. how did you upload the file?
-after uploading the file check the file in OS level(goto SM69, execute CAT, in additional parameter (not in parameter) give the full path (case sensitive), execute. ). here you can see the actual content of the file... check you data is present or not
-which structure are you using to download and upload? a temp work area.. then please provide the WA details, so that i can try on my system.
lets see what happens next
one more thing: regarding AL11, it can read upto length 510 characters. check program RSWATCH0 form SHOW_FILE. here the read dataset into butffer is 510 characters.

My firefox toolbars are not visible when I open firefox

All of my firefox toolbars are not visible when I open firefox. I get the tabs but no command menu no search bar or any other toolbar icons help!!
== This happened ==
Every time Firefox opened
== when I logged on one day about 2 weeks ago ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

All the Google toolbar buttons(other then print) are not visible after installing Firefox 4

Google toolbar buttons (other then print) are not visible after installing Firefox 4 for Mac.

Yes - there is a fix... called IE9... http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-9/worldwide-languages

Macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

MY PRINTER " HP Deskjet Ink Advantage K209a" OPERATING SYSTEM Windows 8 32 bit
Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
[Personal Information Removed]
Please give me a suggestion

Hey 101214,
I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a). I also see that you need a driver link for this OS and Printer. Please follow the link below to download the driver for this printer/OS combo.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
If you need information on how to perform the USB installation on your Windows 8 PC please click here.
I wish you the best!
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Cs12 trial not responding when installed, windows 7 64bit...how to fix??

cs12 trial not responding when installed, windows 7 64bit...how to fix??
Not a very good recommendation for buying the app!!!!
Does anyone at Adobe follow these questions??? If so please respond (your app will not!!)

Hi wcarlstrom,
Adobe CS12 is unheard of. Adobe Creative Suite's latest version is CS6.
Please be specific as to what software you are trying to install, OS version etc so that I may be able to help you.

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

Similar Messages

Maybe you are looking for