CS3 Premier Pro Won't Start due to Komplete 5 .dll Loading...

Hi,
I'm running Komplete 5 by Native Instruments on a brand new Quad Core laptop that was built and tweaked by a pro audio company that specializes in configuring machines for musicians. The Win XP Professional system runs very well.
After installing Adobe CS3 Suite, I noticed that the only program that won't start properly now is Premier Pro. When try to start Premier Pro 3.0, the splash screen opens and I can see the Komplete 5 software programs (Kontakt 3, Massive, Pro 53...) trying to load their .dll files. After a few seconds, Premier Pro quits and gives me a Runtime Error.
I've searched around a little bit and can't even find the .dll's for Komplete 5 to try the suggested experiment of moving them away out of their folder and then to bring them back after (if) I get Premier Pro to start as I have indexing turned off on the drives (which I "think" is to keep the system speedy?) so searching manually has not been easy so far. I looked in the vst folder and they are not there, unless I am missing something.
Any help would be greatly appreciated.
Thanks.

Jerry,
You likely have an issue with one, or more, of the NI .dll's. There have been several issues with these. Do a search of this forum (go back to get all Premiere versions) for "Native Instruments." There are serveral threads on moving the .dll's, so that Premiere doesn't try to load them. Premiere will attempt to load every registered VST/.dll, as you have found. NI's do cause PP to hang.
Good luck,
Hunt

Similar Messages

My 2009 2.26Ghz MacBook Pro won't start up

My 2009 2.26Ghz MacBook Pro won't start up. I know it's not the HDD because I replaced it with the old one I had in it and it did the same thing. I also know it isn't the HDD because I can boot of of it when I attatch it via an external HDD enclosure. It sometimes turns on if I let it sit for 30 minutes and if it does turn on it works perfectly and has no symptoms until I close it then it freezes up when I wake it up and I have to hard restart it but it doesn't restart then. It seems to do this more so if I close it then move it (put it in my bag and go to school). It's getting me really upset cause if it's my motherboard it's $600 to replace (almost not worth replacing except I don't have $1400 for a new MBP) please give any advice. I thought about buying the data doubler by OWC but that would be a last resort. I upgraded the ram to 8gb, 1333mhz (I know it uses 1066Mhz but I couldn't find any where I live so I put in 1333mhz ram expecting it to underclock to 1066 which it seems to have done that with no issue to my knowledge just thought I'd add that in case though.

Sluggish could be due to not enough ram for what you want to do.
Keep working with it, you may need to put more ram in, but go for the stuff that meets the specs.
A much liked source on here is OWC, http:www.macsales.com you only have to look up your machine to get exactly the right stuff.
Get back with how it is working, would like to hear more.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

Hi! My MacBook Pro won't start! HELP !!!

Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
Has anyone had this same problem?
All I get is white screen + grey Apple and spinning grey disk... it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
This MBP is from 2011, runs on OS X 10.6.8
I tried booting with OS X Snow Leopard CD, it didn't work! (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
When i run coomand on root# fsck -fy --> RESULT = my HD was checked and seems to be FINE!
Thanks

Please make a Genius Appointment and take it in for service.

Spilled liquid on MacBook Pro - won't start - any suggestions?

spilled liquid on MacBook Pro - won't start - any suggestions?

Thank you both for your responses! I watched a video on how to remove the hard drive - special tork(?) screwdriver and too many steps for me to feel confident about doing it myself, so I took the computer to an Apple Store - and thank God, the hard drive appeared undamaged - they are transferring the data to a new Macbook Pro. The loss of data was the scariest part, so I am breathing again!
The laptop was three years old, I was hoping for another year or so before upgrading, but such is life. I appreciate your upfront advice.

Acrobat X Pro won't start

Acrobat X Pro (10.1.6) won't start after Windows update on 3/13/13. Running Windows 7. I do not have CS6 and the Acrofix download does not solve the problem. I have reinstalled the software, applied Adobe updates (at least what I could find) and updated all Dell drivers. Does anyone have a fix for this problem?

Thanks Bill. I did try the repair first before I reinstalled the first
time. I’ll give another go and try the cleaner as well.
Starboard Storage Systems
Daryl W. Overholt
12303 Airport Way, Suite 230
Broomfield, Colorado 80021
(o) 720-446-5105
(m) 303-807-9332
[email protected]
www.starboardstorage.com
From: Bill@VT [email protected]
Sent: Saturday, March 16, 2013 6:38 PM
To: daryloverholt
Subject: Acrobat X Pro won't start
Re: Acrobat X Pro won't start
created by Bill@VT <http://forums.adobe.com/people/Bill%40VT> in *Acrobat
Installation & Update Issues* - View the full
discussion<http://forums.adobe.com/message/5154092#5154092

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

MacBook Pro won't start up after chime, MacBook Pro won't start up after chime

Try resetting the SMC.
Barry

MacBook Pro won't start after changing access rights

I did something very wrong. Unfortunately I changed the access rights of Macintosh HD for "everyone" to none.
Result, my MacBook Pro won't start anymore.
Already tried the installation disk, reset password for root and users. No result.
Help program "check acces rigths". Didn't work either.
How do I reset the access rights of Macintosh HD?

https://discussions.apple.com/docs/DOC-2240
The first solution is what you're looking for.

Macbook Pro won't start properly... keeps restarting without chime!

Macbook Pro won't start properly... keeps restarting without chime!
Late 2007 Macbook pro. OS upgrade worked great for me.
I have had this problem on and off for a month or so. I simply cannot figure out what the issue is. I have tried poerup with and without AC power and with/without battery installed.
Starting in Safe mode does not help.
Trying to start with a disk does not help.
It sort of seems like it might be an internal power issue or GPU issue.
It also feels sort of like a software compatibility issue since my Macbook Pro gets reallly slugish for no apparent reason sometimes and IU have to restart.
I have three different anti-virus programs so I doubt it is a virus issue.
I noticed all this start after I did a Mountain Lion upgrade and then tried to start up VMware Fusion. Fusion seemed to just bog down the computer horribly but did not cause a system crash.
I need to edit an important sequence on Final Cut Pro and don't want it to freeze me out!
Anyone who has had this problem and resolved it please let me know
God bless

Systematically run through this list of fixes.
..Step by Step to fix your Mac
If it doesnt chine it doesn't mean much, the mute could be on or you installed a anti-chime software.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

HT1379 Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

Hold shift key down while booting should get you in
go through this list and get back with me
Step by Step to fix your Mac

MacBook Pro won't start at all - clicking noise with black screen

Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.

You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
It's ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!

Hi. My Macbook Pro won't start, in the middle of the screen, there is a folder sign with a question mark blinking. Thanks a lot!

Here's a link to a Support page on the topic, which may be of help in finding resolution:
•A flashing question mark or globe appears when you start your Mac
There are a few known causes of this symptom, so you'd have to try some things to
see if you can narrow down the cause; this often accomplished by finding success.
Hopefully the info there helps.
Good luck & happy computing!

17" Macbook Pro won't start at all. I shut it down last night at 80% and now there is only black screen, no light, no sound. What to do?

My 17" Macbook Pro won't start at all. I shut it down last night at 80% and today I get only a black screen with no sound, no light, nothing. The power cord light does show orange when plugged in. I don't know exactly which OS it is. It's model # A1286. I've tried all the tips about holding down different keys to no avail. Anyother ideas? (The serial # is w8******agu if that helps.) Many thanks.
<Edited By Host>

I had the exact same issue... Macbook Pro late 2008 with Core2Duo. Went to all the steps suggested in the knowledge base, tried to reset the SMC, but to no avail. Took it to the Macstore in Mexico, the wanted to replace logic board for $800.... Finally, I sent it to a logic board repair service, where they "fixed" the logic board for $200. It worked perfectly for 4 months, then happened again
Any ideas?? I would appreciate any help!!!!!

Attn: macbook pro won't start up past grey screen NO MATTER WHAT

my macbook pro won't start up past the grey screen, NO MATTER WHAT I DO. i've searched all the discussions on this, and NOTHING WORKS. nothing caused this either - i was just browing the internet and using ichat, and my computer shut down, and that is when this started.
I am EXTREMELY disappointed with this bullstein. My computer works great, etc., and I support mac and apple to the nth degree, but then some stupid crap like this happens and I can't use my computer at all. I have to use my sister's **** ibook g3 to even do this.
PLEASE HELP. do NOT post what you have already posted in the other discussions, and i've already been welcomed to the boards. I can't go to an apple store because i'm on vacation in new mexico for the summer, and there no stores anywhere near here. is there any real advice around here? I need to use my computer. That is why I spent close to $4,000 for it with upgrades and software.

where can i get an install disc for the macbook pro?
You really need to use the one that came with your MBP. If you don't have it, a retail Tiger OS X disc should work.
also, could an archive/install potentially free up some harddrive space on my computer?
No, it will actually use more space, so you will need at least 6G of free space. To clean your hard drive, use WhatSize.
WhatSize >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

CS3 Premier Pro Won't Start due to Komplete 5 .dll Loading...

Similar Messages

Maybe you are looking for