CS3 problems in saving and opening files and uninstalling software
?? In CS3 Photoshop I get error message "Could not complete the SAVE AS command because of a program error?" or "Could not complete your request because it is not the right kind of documente?.
I can save files as bitmap but not as psd, jpg, or tiff. Is there a link that correlates all error messages? Also, I am unable to uninstall the CS3 software. I have my original CS3 software to install, but it will not install over existing file that can not be uninstalled. Yes, I need help and thanks in advance.
Read this article regarding installation issues and this one as well. if you are able to reinstall, everything should work out just fine. if not, come back with more pertinent questions and we will try to help
Mylenium
Similar Messages
-
My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya! -
Problem involving saving over indesign file and pdf
Kind of a strange one this one....
I'm currently working on a magazine and have several InDesign files in one folder that i'm working on and a seperate folder where I have saved exported pdf versions of these files. The files are the same names in ach folder eg '1 - 40' '2 - 39' and so on
I accidentally saved over one of my InDesign files so I understand I will not be able to recover it as I wasnt using any backup utility.
However before I saved over the file I had created a pdf version of it and saved it in my pdf folder. So i'm thinking not all is lost as I can use the pdf file to send to the printers.
Now here's the strange bit - I am using PC and when I open explorer I can see the folder icon where all my pdf files are saved and can actually see the 'lost/saved over' pdf version as one of the mini thumbnails for that folder - but when I click on the folder to view the files inside it isnt there - instead it shows a thumbnail of the file i saved over it with...!?!
I'm thinking is there somekind of automatic updating PDF export setting that I may have selected or is it possible that folder icon is using a snapshot of what was inside at a certain point??
Either way I could really do with recovering this PDF - if anyone has any suggestions i'm more than happy to hear them.
Thanks
Marki thought this would help a little
This is the folder icon - in which all my pdf's are. The top left thumbnail is the 'missing/saved over' pdf. So you'd think it would be in there?
Below is a view of the contents of that folder - (for those of you with good eyesight) you can see that the top left thumbnail from the above picture is nowhere to be seen in this folder!! -
Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?
I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them? -
Possible problems with Check out and Open Component and delayed publishing
Hi,
I've experienced some seemingly wrong behaviors of the checkout and open component and also with the delayed publishing feature, I've listed it down :
1) The all important one:
We know we've delayed publishing features for content, if we set the Release Date metadata at a future date, the content will not be released immediately, but do we have a delayed publishing features for a website page. Through manage website the user can add / delete a page(section), may do include or exclude from navigation etc.. but can they set a future date when a particular page can be included in or excluded from navigation? This should be a standard feature for a WCM solution and I hope there is some solution for sure.
2) Can we set a datefield with a calendar feature as a page custom (section) property?
3) Again the issue with checkout and open component, only the user with admin privilege seems to be able to change the content, normal contributors cannot, cause every time is tries to check in with the old author name, so the user has to have admin privilege to assign a different doc author's name. No trace also who is making the changes.
4) Also facing a lot of problems while trying to implement when we use this checkout and open component. As we cannot check who is making the change there is to way to set us a step for self review, also user can only approve or reject but cannot edit the doc before passing it to the next step, if the step user is created using tokens then only checking out of the doc takes it pass the step user, but everything is working perfect with contributor data file. No problem whatsoever. Even if we use manual check out and then check in (i mean without using checkout and open component) this is working fine. But the main problem with non-technical users will be they would not like the content server portal at all and they would always prefer ms word over anything else. They would directly like to double-click on the website page, the word doc will pop up and they would make change and save.
Issue 1 and 4 are killer issues for us, I need your help to find a solution. I have few more issues that i will post later.
Regards,
Nirmalya
vijayr: Are u Vijay Ramanathan? Product Manager, Oracle UCM, u r my mentor sir.Hey Shotdawq,
I was a bit low on bandwidth, so could not visit the forum any sooner.DIS is dynamic integration studio, it works on the webdav protocol.
you will need to install DIS on the client machines. The POC that i did was integration of SiteStudio with CheckOutAndOpenInNative.
I am also planning to referenc this functionality from WebSphere, what i have in my mind is to copy the java script from my sitestudio page and paste
it in the JSP, and then using the CIS or RIDC will execute the serverices. At present i am stuck in some other work, If i get this thing working i will
update you. In the meanwhile if you have some question for me, feel free to throw them.
cheers,
sapan -
Help!!! accidently saved my psd file and lost all my design
hello forumers
i accidently saved my psd file and lost all my design is there a way to get it back?!??!?!pls helppppp...
ps:i didnt delete it,i just clicked on save as wihtt he same name,but i dindt notice the design was missing,until i opened up the psd file again.
thank you.This is a Mac Photoshop forum, so it was a reasonable assumption. If you closed the file you are hooped unless you can access a backup.
Too late for this job, but you might want to install Dropbox. You get 2 GB of space for free on Dropbox’s servers, and any files saved in your My Dropbox (I think that’s what it’s called on Windows) folder are copied to Dropbox’s servers. The big deal is that you can share any files or folders with other users or other computers, so you could have the same folder on your work and home PCs and files saved on one are automatically updated and available on the other. The other big deal is that Dropbox keep old versions of files. I keep all working jobs in Dropbox and remove them only when complete and ready for archive. It is a huge bacon saver.
Self serving link: https://www.dropbox.com/referrals/NTUwMDUyOTI5
If you sign up using the above link I get a tiny increase in my allotted storage. -
Problem in reading no. of files and writing into a single file
Hi,
Iam with Problem in reading no. of files and writing into a single file....
Iam reading no. of files stored in local directory.......
Iam able to read and print the data in files successfully....but while writing..only first file is being written...and the next files are not written in my output file...
plz tell me my mistake....I hope Iam doing some mistake while writing into file...PLz help.....
Basically my code structure is like this....
import java.io.*;
import java.util.regex.*;
import java.util.*;
import java.text.*;
import org.apache.poi.poifs.filesystem.POIFSFileSystem;
import org.apache.poi.hssf.usermodel.HSSFWorkbook;
import org.apache.poi.hssf.usermodel.HSSFSheet;
import org.apache.poi.hssf.usermodel.HSSFRow;
import org.apache.poi.hssf.usermodel.HSSFCell;
class Writing {
public static void main(String args[]) throws Exception {
FileOutputStream fileOut = new FileOutputStream("ServerResult.xls"); //my output file
int counter = 1;
File dir = new File("C:/Perform/ServerLogs");
String[] children = dir.list();
if( children == null)
System.out.println("The Directory mentioned does not exist");
else {
for (int fileNo = 0; fileNo < children.length; fileNo++ ) { //Files iteration starts
String filename = children[fileNo];
File logFile = new File(filename);
FileReader logFileReader = new FileReader(logFile);
BufferedReader logReader = new BufferedReader(logFileReader);
StringBuffer sBuf = new StringBuffer(5000);
HSSFWorkbook wb = new HSSFWorkbook();
HSSFSheet sheet = wb.createSheet();
HSSFRow rowTitle;
HSSFRow rowReq;
HSSFRow rowRes;
String aLine = null;
boolean skip = false;
boolean readed = false;
boolean initReq = false;
boolean flag = false;
long requestTime = 0;
long responseTime = 0;
long recdTime = 0;
long sentTime = 0;
long hasTime = 0;
long presentTime = 0;
int hasCalls = 0;
Pattern startMessage = Pattern.compile("^<MESSAGE.*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern requestMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<ActName>(.*)</ActName>.*", Pattern.DOTALL);
Pattern requestMessage1 = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"RequestMsg.\".*ID=\".*_"+args[0]+"\".*<Svc id=\"(.*)\">.*", Pattern.DOTALL);
Pattern responseMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"HostConnInit\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern initResMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*", Pattern.DOTALL);
Pattern initResIDMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"ResponseMsg\".*ID=\"null\".*<IATA>"+args[0]+"</IATA>.*", Pattern.DOTALL);
Pattern sentMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgSentInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
Pattern rcvdMessage = Pattern.compile("^<MESSAGE.*TS=\"(.*)\" CATEGORY=\"DCMsgRcvdInfo\".*ID=\".*_"+args[0]+"\".*", Pattern.DOTALL);
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss.SSS");
DecimalFormat dcf = new DecimalFormat("########.##");
String actName = "";
if (fileNo ==0)
rowTitle = sheet.createRow((short)0);
rowTitle.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)0).setCellValue("Req/Res");
rowTitle.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)1).setCellValue("Action");
rowTitle.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)2).setCellValue("Server Time(in ms)");
rowTitle.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)3).setCellValue("Request Vs Response Time in Server(in ms)");
rowTitle.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)4).setCellValue("Time Taken By HAS/HOST(in ms)");
rowTitle.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)5).setCellValue("No. of HAS calls");
rowTitle.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
rowTitle.createCell((short)6).setCellValue("Data Size");
//wb.write(fileOut);
while((aLine=logReader.readLine()) != null) {
if(aLine.startsWith("<MESSAGE TYPE=\"EVENT\"")) {
Matcher m = startMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
initReq = false;
m = initMessage.matcher(aLine);
if(m.find()) {
initReq = true;
} else {
if(initReq) {
m = initResMessage.matcher(aLine);
if(m.find()) {
sBuf.setLength(0);
sBuf.append(aLine);
skip = false;
} else if(aLine.startsWith("</MESSAGE>")) {
if(!skip) {
sBuf.append(aLine);
readed = true;
} else if(!skip){
sBuf.append(aLine);
if(!skip && readed) {
String tempStr = sBuf.toString();
if(tempStr.length() > 0) {
boolean reqMatched = false;
Matcher m = null;
if(initReq) {
m = initMessage.matcher(tempStr);
actName = "Intialization";
} else {
m = requestMessage.matcher(tempStr);
String time = "";
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
} else if(!initReq){
m = requestMessage1.matcher(tempStr);
if(m.find()) {
reqMatched = true;
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
if(i == 1) {
time = groupStr;
} else if(i == 2) {
actName = groupStr;
if(time.length() > 0 ) {
try{
requestTime = sdf.parse(time).getTime();
}catch(Exception ex){}
System.out.println("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
//bw.write("Request,"+actName+","+time+",,,,"+dcf.format(((double)time.length()/1024.0))+"K");
String reqDataSize = dcf.format(((double)time.length()/1024.0))+"K" ;
rowReq = sheet.createRow((short)counter);
rowReq.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)0).setCellValue("Request");
rowReq.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)1).setCellValue(actName);
rowReq.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)2).setCellValue(time);
rowReq.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)3).setCellValue("");
rowReq.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)4).setCellValue("");
rowReq.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)5).setCellValue("");
rowReq.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
rowReq.createCell((short)6).setCellValue(reqDataSize);
counter = counter +1;
System.out.println("counter is "+counter);
Matcher l = sentMessage.matcher(tempStr);
Matcher k = rcvdMessage.matcher(tempStr);
if(l.find()) {
for (int i=1; i<=l.groupCount(); i++) {
String groupStr2 = l.group(i);
try{
sentTime = sdf.parse(groupStr2).getTime();
}catch(Exception ex){}
if(k.find())
for(int j=1;j<=k.groupCount(); j++) {
String groupStr1 = k.group(j);
try{
recdTime = sdf.parse(groupStr1).getTime();
}catch(Exception ex){}
presentTime = (recdTime - sentTime);
hasTime = hasTime + presentTime;
hasCalls = hasCalls +1;
if(!reqMatched) {
if(initReq) {
m=initResIDMessage.matcher(tempStr);
} else {
m=responseMessage.matcher(tempStr);
if(m.find()) {
for (int i=1; i<=m.groupCount(); i++) {
String groupStr = m.group(i);
try{
responseTime = sdf.parse(groupStr).getTime();
}catch(Exception ex){}
String resDataSize = dcf.format(((double)tempStr.length()/1024.0))+"K" ;
rowRes = sheet.createRow((short)(counter));
rowRes.createCell((short)0).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)0).setCellValue("Response");
rowRes.createCell((short)1).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)1).setCellValue(actName);
rowRes.createCell((short)2).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)2).setCellValue(groupStr);
rowRes.createCell((short)3).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
rowRes.createCell((short)3).setCellValue((responseTime - requestTime));
rowRes.createCell((short)4).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
rowRes.createCell((short)4).setCellValue(hasTime);
rowRes.createCell((short)5).setCellType(HSSFCell.CELL_TYPE_NUMERIC);
rowRes.createCell((short)5).setCellValue(hasCalls);
rowRes.createCell((short)6).setCellType(HSSFCell.CELL_TYPE_STRING);
rowRes.createCell((short)6).setCellValue(resDataSize);
hasTime = 0;
hasCalls = 0;
counter = counter + 1 ;
sBuf.setLength(0);
readed = false;
wb.write(fileOut);
} // End of for (int fileNo = 0; fileNo < children.length; fileNo++ )
} //End of else
fileOut.close();
} //End of public static void main
} // End of ClassFirst of all, use [code]-tags to make your code readable, please.
I didn't do a complete inspection of your code (because it's too much and unreadable as it is) and I don't know POI, but creating a new HSSFWorkbook for each input file sounds fishy to me ... try re-using the workbook and just creating a new sheet in each iteration. -
My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?
There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.
-
when i save something, it is saved as a file and htm. i never had this with internet explorer. how do i just save as i would presume htm?
Are you talking about IE's MHT or MHTML format for saving webpages in a single file format? <br />
http://en.wikipedia.org/wiki/MHTML
Two Firefox extensions that will "do" MHT files. <br />
UnMHT extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/unmht/<br />
Mozilla Archive Format - MAF <br />
https://addons.mozilla.org/en-US/firefox/addon/mozilla-archive-format/ -
my account is active and paying per month for Acrobat Pro. Why I cannot open files and the screen asks for serial number?
I don't work for Adobe but it seems to me you might be signing in to Acrobat with the wrong Adobe ID.
Check the Adobe ID you use in Acrobat.
Check this Adobe ID on Adobe's to make sure that it has an active subscription. -
Problem in saving modified rtf file in jsp
hi,
I have [b]problem in saving modified rtf file in jsp. My scenario is like this:
I need to open rtf file in jsp and allow user to modify it, after user modifies rtf file in browser, user will press send button. After user pressing send button rtf has to be saved into destination directory(the directory from which its been fetched. I appreciate if any one could send me relevant code for the same.
thanks
ram1) RTF is not opened in your browser, but in an application that is set to handle the file type (like Word or Wordpad)
2) from the web you have no control over what that application does
3) conclusion: what you want is not possible using the web
Other than that, asking for code without showing that you put some effort into the problem yourself is a sure way of getting flamed. You should know that by now, since you registered more than 2 years ago... -
Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe
LadySarah
You cannot upgrade from v6 to v7 without purchasing iLife 08.
Can you give more details about your crashing issue. Make of camera etc.,
You can start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD
Regards
TD -
I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?
You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.) -
In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappears in the list. I have tried deleting preferences "plist" but I am totally unable to remove the folders.
I've seen one other report like yours, and I think the issue is caused by a bug, but I don't know what triggers it.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
Exporting and AEP to an earlier version of AfterEffects
I need to export a project that I created in CS4 so that I can open it up in CS3. Does anyone know how to do this? Thanks in advance
-
Invoice split per customs status
Dear experts, At my customer we want to split invoices per customs status. This means no Duty Paid and Duty Unpaid should be on 1 invoice, neither do mix with inward processing products.... The company only wants to use final invoices, so no proforma
-
Hello gurus, for the F110 transaction, we need to execute a program after the standard RFFOD_U or RFFOD_L that takes the dme file, adds some information to the file name and leaves it in a specific folder. Is it possible to add this program to the pr
-
Using my shuffle on an Ipod dock
I have an Ipod shuffle, generation 2 with the USB dock. I also have an Ipod dock that was universal, it had the attachments to attach any ipod needed. It also has a USB port but when I plug in my ipod shuffle, and change the settings to 'ipod' it doe
-
Hi, I use SimpleDateFormat for converting a string to Date. My input will be a String in MMM DD, YYYY format and I want the output in yyyy-MM-dd format. The piece of code I hv written works well for English, but not for French. My code: String s