CS3 put black frame onto images on saving end freezing in full screen mode

HI, I've got 2 problems with CS3, the first on my macPro 2x2.66 xeon - 4 Go - MAC 10.5.2
CS3 put, randomly, black frames on pictures when I'm saving as TIFF, CMJN, 8bits, a few month ago I have had same problems but with white frames ....
Another problem with CS3, on a MacBook pro 2.4 - 3Go with LaCie LCD 21" screen, when I enter full screen mode and I moving picture with the hand, the Mac is freezing, and I have to reboot;
3 days ago after a crash, I've had to reinstal the system because the Lacie was seen as a "LCD screen" (not Lacie) and with 1440 pixels max display (1600 usualy).
I do really NEED help please

lepixel,
What specifically do you mean by "network"? Are you working and saving files directly across a network? If so, and that is the problem, it is a known issue that does not necessarily mean you have a problem with your computer.
If a network is properly configured and maintained by a knowledgeable IT specialist, you can work this way. But as there's a very high number of possible network configurations and chances for fatal file errors (such as what you're experiencing), Adobe specifically warns that you should first drag-copy your files off the network server to your desktop, work locally, save locally, and then drag-copy the completed work back to the network server.
Does this describe your network and workflow?
Neil

Similar Messages

  • CS3 freezes in Full Screen Mode

    CS3 was fine until today when it started working extremely slowly/freezing when using any tool in Full Screen Mode. No problems in the other three screen modes.
    Fairly large problem as I prefer Full Screen on Apple 30" display.
    Using MacBook Pro 2.4 GHz, 4 GB 667 MHz DDR2 SDRAM, OS 10.5.2.
    Looking forward to reply.

    If you ever find out how, please post the solution here.

  • Images in galleries not showing in full screen mode

    I have a number of galleries in my ibook.  Some of them work fine and the pictures open up in full screen when tapped/pinched.  Other gallers dont allow me to view the pictures in full screen.  I have created them all the same way as far as I know.  Has anyone else had this problem and know how I can resolve it?  thanks in advance.

    If you believe the resources are similar but act differently, you might have some sort of corruption in one of them or in your book that is contributing to how that book displays on an iPad.
    Try taking the wonky ones out, then saving and putting them back one at time to see if you can isolate the issue.

  • Saving Edited Pics in Full Screen Mode

    Hi all,
    I'm pretty sure there is a way, but I couldn't figure it out, but what I want to do is to be able to save a copy of a pic when viewing in FS as a copy. So lets say I'm viewing a pic, and it looks good in B&W, but I want to save a copy of the original, and the copy in B&W.
    Is there a keyboard shortcut that would let me do this?
    Thanks for any help.

    Joshua
    If you edit or make any change to the pic, the original is always kept and a copy saved so that you can revert to the original.
    If you are working on a file that has already been edited tho' beware, as this will overwrite the modified file. In this case make a Duplicate of the edited photo (Photos Menu -> Duplicate) and work on that.
    Regards
    TD

  • Quick Look full screen mode won't move to next image?

    When I highlight the first image in a folder full of multiple images and then press "Space" quick look opens and shows me that first image. I can then move on to the next image by simply pressing the down arrow.
    But if I enter quick look's full screen mode it won't move to the next image unless I first select all the images in the folder before entering full screen mode?
    Why? Why would functionality SO simple (move to the next image) not be included in the full screen mode of quick look? It renders the full screen mode essentially pointless, who wants to look at ONE image in full screen? Of course everyone wants to browse the images, but why should I have to select all of them, why not just let me move from one to the next... exactly as I can when NOT in full screen mode?
    C'mon apple...

    I remembered that there had been a slight bug in the Leopard Quicklook, so that if you went to full-screen QL, then used Command-Tab to switch to another program, then Command-Tab back to Finder, you would be back in QL Full Screen, but you could now navigate with the arrow keys. At first I thought this had been fixed, and started mucking about with other key combos and accidently got it going again. Took awhile to figure out exactly what I had done, but it works like this:
    1. Select your file, hit spacebar and click the full screen arrows
    2. Command-tab to some other program
    3. Mouse click the toolbar or sidebar of the open folder with your file in it
    4. You can now navigate with the arrow keys
    Although I don't really see how this is better or easier than opening the folder, hitting Command-A, then bringing up QL....
    Francine
    Francine
    Schwieder

  • 'Custom' frame size sequence displaying weirdly in full screen mode...

    I cutting an IMAX film, the frame is 1428 x 1050 (virtually 4:3 ratio). In ProRes it plays and works just fine on the timeline, proper proportions in the canvas and viewer windows ... and when I open it to full screen it works, proper proportions, as a 'still' image; but when I hit 'play' it pops into a 16:9 sort of frame ... the image squashed.
    This doesn't happen with an 'uncompressed' codec, only with ProRes.
    Is there any way I can set something in FCP to compensate for this? So it will actually play the custom frame in its proper proportions in a full screen mode?
    Ben

    Possible solution (skin) and workaround (listen for fullscreenevent) mentioned here.

  • "Fit to Screen" while in full screen mode - image fits behind palettes.

    Is there a way to "fit to screen" when in full screen mode and NOT have my image go behind my open palettes (Layers, etc.)? I am hoping there's a way for me to hit command zero and have my image fit perfectly between palettes. Every time I hit command zero I have to readjust my image or zoom out so I can see the whole thing. (Photoshop CS5)

    Not that I know of.  I address this problem two way.  I add a second display an move the Photoshop Pallets I use the most out of Photoshop's main window onto the second display docked to each other and open expanded.  The Palettes I do not use often I dock to Photoshop Main windows right side collapsed. Even if you do a view actual pixel Photoshop only zoom the image area to all the space between the docked tools palette on the left and the collapse docked palettes on the right. The pallet are only over the image window when you expand one open to use it. If you view the following screen capture in a new tab or window you can scale it to its actual size and scroll around over it. My TwoScreen workspace....

  • Please help, cannot compare images in full screen mode

    I am not able to compare 2 images in full screen mode. I am using a MBP and a ACD 23". The main image will remain in the ACD while the image being compare is being shown in the MBP.
    I am able to compare images in the viewer mode.
    My main display is the ACD 23 which I selected using the display preferences under 'Arrangement' with the menu bar located on the ACD. In Aperture, Secondary Viewer is set to Blank.
    I had also tried different combinations of Main Viewer and Secondary Viewer settings but was not successful.
    Am I missing something? Anyone have the solution?Thanks in advance for any help.
    norheng

    Anyone have any suggestions to using Aperture to edit images using a MBP and ACD so that it best utilize Aperture full screen mode in comparing and narrowing down to the pick.
    I am now trying to use the MBP as the main display and ACD as the secondary. This way I am able to compare images with the MBP in the Browser mode and the ACD display the compare images full screen. It work with the secondary display - ACD set to mirror, span and alternate mode.
    It would be best if only one screen is use and hence save energy consumption (reducing global warming and bill, if it help).
    Thanks in advance for any suggestions or and solutions.
    norheng

  • Images get stuck in full screen mode

    In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode.  Please help!!

    In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode.  Please help!!

  • Adjusted photos in full screen mode show digital garble over image

    Since installing iPhoto08 viewing photos in full screen mode is very disappointing and frustrating. Some images will appear with this (for lack of a better term) digital garble over half or the full photo. Sometimes by switching to the next or previous image it will correct itself. It seems to happen only with photos I've adjusted. This never happened with iPhoto6 that I upgraded from. These photos are all 8 mpix, my mac is a G5 2.0 with 2 GB RAM. I've also noticed that the over all perfomance of adjusting the photos is very slow as well. I posted the image here www.capacitornetwork.com/iPhotoDigitalGarble.jpg. Compare the left and right halves (The photo was originally shot B&W). Thanks!

    zaadar:
    Welcome to the Apple Discussions. Have you checked the HD with Disk Utility to see if it needs repairs? Not disk permissions but the disk itself. Also delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. A corrupt preference file has been known to cause some strange problems. It's worth a try.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I want to put Acrobat in full screen mode, and use the pencil to write simultaneously.

    I want to put Acrobat in full screen mode for a presentation, and use the pencil to write on the page at the same time. Is there any way both can be used simultaneously?

    George is on the money - you'll not be able to use the pencil tool while in full screen.
    Something to try:
    Use F8 and F9 to hide what is at the top of Acrobat's window.
    Have the Pencil tool selected for use first.
    You'll be able to use the Pencil tool.
    The PDF, with Acrobat's window maximized, will give the appearance of "full screen".
    Be well...

  • Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

    Please make changes for contact image for for full screen... I bought Iphone Only for full screen contact image so please make changes for full screen contact image...

    I bought Iphone Only for full screen contact image
    Is that so? So you don't use ANY of the other features of the iPhone? You don't use the internet, apps, play games, make calls, take pictures, or ANYTHING else at all? You just wanted full-screen contact image?
    I don't believe you...
    Please make changes for contact image for for full screen
    Tell Apple: http://www.apple.com/feedback/

  • Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program.

    Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program. This is the first time I have any problems with Aperture.
    I run aperture 3 on OS X 10.7 iMac 27" 2.8GHz i7 16GB.
    Thanks for any help.

    You have to change the cursor focus.
    What I usually do for PDF pages/tabs, is click in the URL/location bar, then F11.<br />
    For Flash, if you click on the page outside of the video area/box, F11 should work.

  • Black frame around image icon during Web Start start up

    Hi,
    Sometimes I can see black frame (16 pixels) around my own icon during resource files downloading. My icon resolution is 32*32 pixels.
    It appears like Web Start assignes size of the icon to 64*64 pixels and all space around my 32*32 icon is filled by black colour.
    Playing with the width and height parameters. As a result it did not help.
    Please, aslo see link below:
    http://amikhailov74.googlepages.com/scr.JPG
    <information>
        <title>MyApps</title>
        <vendor>                                        MyApps</vendor>
        <description>MyApps</description>
        <description kind="short">MyApps</description>
        <homepage href="http://myhost/webstart/"/>
        <icon href="images/backup_icons/FTOicon_ftt.gif"/>
        <icon href="images/myicon.gif" width="32" height="32" />
      </information>How can I fix problem with this black frame?
    Thanks for your help.

    Sonal wrote:
    ClassLoader cl =Frame.class.getClassLoader();
    Image programmIcon = new ImageIcon(cl.getResource("\colorandsize.jpg")).getImage();
    Change that to something like..
    ClassLoader cl =this.getClass().getClassLoader();
    Image programmIcon = new ImageIcon(cl.getResource("/colorandsize.jpg")).getImage();
    ..There are changes to both lines.

  • Black screen when I use WMP in full screen mode

    Hi.
    When i watch TV on the windows media player so i have problem. If I switch on full screen so there is just black screen but i can hear sounds.
    I've got my laptop for 4 months but everything was ok.
    This problem started just now maybe 2 days ago. I think i've done something but i don't know what and i can't fix it.
    Could you help me please?
    Thanks

    > When i watch TV on the windows media player so i have problem. If I switch on full screen so there is just black screen but i can hear sounds.
    Hi,
    It may be an obvious suggestion but, have you checked the "video settings". If you have changed the brightness and/or contrast playback to min values (ie no contrast and no brightness), the screen will play black.
    To check the video settings, click the little arrow under the "Now Playing" tab and mouse over "Enhancements" then select "Video Settings" and select reset.
    OR
    1. Press ctrl + m
    2. Open the "View Menu"
    3. Select Enhancements
    4. Select Video Settings
    5. Select Reset
    OR
    [Follow this image|http://img132.imageshack.us/img132/5344/99578800dd2.jpg]
    Hope it helps

Maybe you are looking for