CS3: Quick Mask trouble

Quick mask is a fantastic tool but I'm having trouble with it. I used the quick mask to select the area I wanted and hit "q" again to give me a selection, then used invert selection to swap from having everything BUT that area, to ONLY that area. I created a new layer and overlayed the color layer I wanted and changed the blending options for the layer to "Soft Light". I then used Ctrl+D to deselect.
The color overlay I wanted to use is fine, but I have a thin grey line (1-2 pixels wide) running around the entire perimeter of where my selection was. It is part of the base layer, not the overlay layer but I can't for the life of me work out where it came from. I checked whether it was only part of the PSD file but upon saving as a JPG the line is still very much present.
Has anyone else experienced this and or/know of a way to fix it?

Soft for the greater part of the work. However I did no work on the background layer where this line has appeared, only on the other.

Similar Messages

Quick mask mode problem in Photoshop CS6 64bit

Hi, I have recently installed Photoshop CS6 after previous happy experience with CS3.
The software appears to be seizing up when editing a selection in quick mask mode (image or layer mask) under the following conditions:
- 64 bit mode
- image > screen size, especially at 100% maginification
- or image magnification adjusted whilst in quick mask
The red mask appears slowly and only where I move the mouse curser - but will not cover the entire masked area.
The software freezes, and I have to kill the process from the OS. Task manager shows its status as 'running' and memory / CPU do not appear to be maxed out.
System info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2394 MHz
Built-in memory: 3955 MB
Free memory: 1488 MB
Memory available to Photoshop: 3360 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 5650
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 5650
OpenCL Unavailable
Driver Version: 8.712.2.1000
Driver Date: 20100315000000.000000-000
Video Card Driver: atiu9p64.dll,aticfx64.dll,aticfx64.dll,atiu9pag,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 5650
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 91198564117458096913
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\User\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 232.9G, 164.9G free
Any help with this appreciated as I use QM a good deal,
Thanks
Tim

Boilerplate-text:
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Toggle composite and grayscale mask in Quick Mask mode : Problem

Hello.
I have a problem with this command : "Toggle composite and grayscale mask in Quick Mask mode"
I know i have to press the tidle key " ~ " to activate it but i'm using an Azerty keyboard (belgium) and i have trouble with it.
The only way i can use the tidle key on my keyboard is to press "Option + n" keys.
So in Photoshop, i load a channel selection, turn into "quick mask mode" and then press "Option + n", but nothing happens.
If i try with "Command+Option+n", i open the window for a new document.
I have tried ALL combination of keys but nothing worked.
I have also tried to change the keyboard input to Britain, Usa, etc but it still doesn't work.
I'm using the english version of Photoshop CS6 (Subscription), and an Azerty Keyboard (Belgium) on a Mac Osx Snow leopard.
How can i solve this problem ?

Do you have an AltGr key on the right side of the keyboard?
Anyway on a windows system set to your language/keyboard layout i can hold down the AltGr key while pressing the tilde key (on the right side of the keyboard up and to the right of the AltGr key)
and that seems to work in photoshop in place of tilde key on an us english keyboard.
Not sure what the AltGr key would be on a mac system, maybe the option key on the right side of the keyboard?
Added:
I don't think it will work on an english version of cs6, you probably need a localized version of cs6.
If your on the subscrition plan you can change the language version of photoshop cs6.
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-web/installing-multiple-lang uages-of-a-desktop-application/

How to i get to quick mask mode in photoshop 7.0

how to get to quick mask mode in photoshop 7.0

http://www2.hawaii.edu/~kiray/Eng_308/work/Photoshop7_QuickMask.pdf

Quick mask problem in CS5

I am a newbie and I have come across a problem which I cannot seem to rectify, when trying to use the quick mask tool and select the paintbrush it does not work, i.e no mask is created, can anyone help

Adobe Acrobat doesn't have a quick mask tool.

Quick mask mode no longer works for Photoshop CC

I have the latest version of Photoshop CC, and the quick-mask-mode no longer functions as it should. When I try to modify an existing mask with the quick-mask-mode the highlighted read only appears on some of the photo being edited. In additions, those highlighted that do appear red only do so very slowly. This problem appeared after a recent update to Photoshop CC.
I have been using this quick-mask-mode for the last 10 years and have never seen this bug before.
I know how to check the options and my opacity is at 50%.
I use quick-mask-mode frequently and I need it to work.
Is there a setting I need to change?
It is hard to believe that I am the only one with this problem.

I'm having the same problem and I just downloaded the latest updates, which didn't seem to fix it. Here's a screen shot:
And the red just along his tricep I had to draw "blind" because it wouldn't populate the brush stroke to cover his arm until after I moved my mouse to the side of the screen. Any changes or movement on the screen is slower than molasses.

Hi All, ready for a quick mask question from a newbie ;-) ?

When I make a quick mask selection, it becomas "red-ish" as it suppose to. When I leave quick mask mode however, the painted area does not become a visible (yes I checked the correct option dialogue box, I guess, according to a friend) selected area though. But when I make any adjustment, eg color saturation, it only affects the area I selected in the quick mask mode, which I cannot see except for the adjustment. How on earth did I manage to make this happen. What have I done wrong or haven't done at all? You kind attention and quick reply is highly appreciated. Best /Stefan

Thanks a lot, Sir, much appreciated. Under View options one can selected "show selection outlines or boundaries", well not in swedish, it says something completely different, but just as you said, there it was!
Again, thanks a lot!

No Quick Mask mode in Photoshop CC Win

My Photopshop CC for windows does not open quick mask mode when I try any of these three (Select / edit in quick mask, or hitting Q on the keyboard, or clicking the washing machine Icon) Instead it goes into and Alpha/8 or 16 mode. And I am not able to paint any masks? What an I missing? I have the latest software (last week) and use the windows version.

Usually when Quick Mask is set up properly, the selected (painted) areas are shown as 50% red. For example when you use a brush to paint your selected areas. By the way using ordinary selection tools while in Quick Mask mode will not show the red area, you must use the selection tools then go into Quick mask mode to see the red area.
To see what your Quick Mask settings are like, double-click the Quick Mask icon, and the options should look like this:
The 50% red comes from olden days when graphic designers would apply a red film called "Rubylith" to mask off areas in artwork and tailor it with an exacto knife.

Problem with quick mask selection appearence

Hi,
I am having a problem with the quick mask view (red) selection. When i press the \ key to see the selection i get a red rectangle in a random place of the screen instead of the red selection. Before the last update i had no such problem. Any solution to this ?
I am working on 64bit cc version Win8

No I tried to disable the Graphics Processor but no result. It is as it tries to aply the mask but crushes. if i leave it for about 10 sec photoshop crushes also...

Quick masks in Lightroom

This is probably more of a suggestion about the adjustment brush/quick masks. It would be nice to be able to selectively add your to your adjustment while viewing the quick mask. We can do this in Photoshop and it works wonders in narrowing down your area of selection/adjustments. I find myself not using the adjustment brush as much as I could because it’s rather cumbersome, I end up missing lots of spots within my area, you basically have to "remember" where your gaps in your adjustment are. Just food for thought for future updates of Lightroom.
Currently running Lightroom 2.4 on PC and Mac

It would be nice to be able to selectively add your to your adjustment while viewing the quick mask.
You can paint, while viewing the overlay (quick mask, as you call it).

Doubt on quick mask mode?

Hi i have 3 layers in photoshop.
Background
layer1
layer2
Now on layer 2 i did a selection and entered into quick mask mode and then applied gussian blur. When this is done does the selection borders try to blend with the back ground or will they try to blend with the layer 1 as it is the layer just behind the layer 2. In case if there is no background, I mean if all three are layers then what happens?

Just got more confused. I do understand what do u mean by glass plates. i am not changing the order of the layers. My question is specific. The selection on the layer 2 normally will have hard edges. I want to smoothen them. So i have applied quick mask and after that i have applied blur to the selection edges. So now the edges have to blend into the background. So when i apply blur to edges of the selection on layer 2 which is above layer 1 do the edges try to blend directly with the back ground or will they try to blend with the image on layer 1 which one will it consider for blending the edges?
I have an image in the background and another image in layer 1. when i apply blur for edges on layer 2 and after that i did inverse selection and removed the selected part of the image on layer 2. So at that time we can see the smooth edges.
The following is the tutorial that led me to this confusion
http://www.photoshopessentials.com/basics/selections/feather-quick-mask/

CS 4 Quick mask problem

Hi
My first posting here
Cant figure out whats wrong. Maybe somebody here can guide me to a solution.
When selected quick mask.
Masking out an area and using brush to select area.
When exiting the mask i dont get the marked area visible by the "walking ants" showing my what area i masked.
Regardless of brush diameter.
Before i had the same problem when opacity was set lower than for example 50. Setting the value higher solved the problem.
Now opacity is 100 but i can see through the marked out area
I have choosen red as color for masking area.
Also the brush is "cut" in half when exceeding ca 300 in brush diameter.
Any tips?
AVFR

Thanks for quick replies.
Photoshop is updatet to latest version,
Drivers are not possible to update yet. No newer that the one i am using.
There exist one that nvidia says will fit to my laptop but get a fault message when installing.
Will examine this further,
Regarding if color i 100 % black.
Where can i check this?
When using cs 3 i couldnt see through the quick mask when opacity was 100.
Now it seems like 50 %
Regardless of which color i choose to use when brushing the areas i want selected
Is there another menu option where i can check enter opacity?
AVFR

Quick mask problem ..?

When i use the quick mask tool it always gives me the inverse selection .. ì have to invert it manually every time. what could be the problem ? any advice would be appreciated..

Double click on the Quick Mask Symbol and make the switch.

How to edit in quick mask

I am working webdesign i am thinking to use quick mask can any one tell me what would be proper use of quick mask edit
Thanks in Advance
<link removed>

Qick Mask is just one of several selection tools, each suited to different circumstances.
I suggest you read up on it in the Help files.

Quick Mask selecting entire photo, not just the area I've painted - CS4

Out of the blue, my Quick Mask selecting has stopped working. Normally I enter QM and paint the area I'm interested in with the brush tool. The selected zone appears in red. When I exit QM the red zone is replaced by a dotted line. But now, when I exit QM the entire photo is selected, not just the areas I painted with the brush. I must have hit the wrong button somehow, but I can't figure out which one it was, or how I can get back to normal. I've tried restarting Photoshop and also rebooting the computer, to no avail. Any suggestions?

Thanks for your help. Your solution didn't solve the problem, but taught me something very useful about toggling between masking and inverting the mask. But I did find the answer in the "More like this" column on the right. I had to trash my preferences, which had apparently become corrupted. Now everything's back to normal.

CS3: Quick Mask trouble

Similar Messages

Maybe you are looking for