CS3: Re-connect audio to a clip on the timeline

I have a common question from my strung-out journalism students:
"I have all these clips on the timeline that I've spent ages cutting and ordering. At the time of my first Source Monitor edit, I didn't plan to use their sound so I didn't bring it down with the vision from the source monitor. Now I realise I want to use the original camera sound".
So: once you have vision on the timeline, and the camera sound either wasn't brought from source, or was subsequently unlinked and deleted, is it possible to "re-attach" the camera sound that goes with the vision without having to find the sequence and re-do the edit?
cheers
Matthew P

Harm's method won't work if you've trimmed the clip in the sequence or if you've used multiple instances of the clip in the sequence. There's apparently a bug in CS3 that prevents this from being as easy as it should, but it works better and as expected in CS4. Here's what you do:
Double-click the sequence clip to load it into the Source Monitor.
Press the Q-key to go to the video in point. Note the timecode.
Press the W-key to go to the video out point. Note the timecode.
Select the clip in the sequence and park the CTI on top of it.
Press the M-key to do a match frame operation.
Set the Source Monitor to display either audio-only or audio+video.
Enter the TC of the in point. Press the I-key to set the audio in point.
Enter the TC of the out point. Press the O-key to set the audio out point.
Drag the audio from the SM image to the sequence. Line it up with the video portion of the clip that's already there.
In CS4, you can Q, I, W, O during the match frame operation without having to manually note the timecodes from the clip instance. You should be able to do the same in CS3, but I can't here.
-Jeff

Similar Messages

Re-importing synched audio to video clips in the timeline

Hello, i have edited together a project with a whole bunch of clips and i unlinked the audio and deleted it to replace it with music but now my client wants the original audio back.
Is there any way of automatically reconnecting the audio to the selected video files in the time line?

Welcome to the forum robz85!
Fastest way to do this:
1. put the playhead over any video clip you need to add the audio to in the timeline. Doesn't matter where within the clip you set the playhead... just don't move it after step 2 nor move it in the Viewer after step 2)
2. With the Canvas active, type f.
3. connect the audio to the tracks you want to add it to in the timeline window on the left (connect the track buttons) then type F11 to perform a replace edit.
4. If you have filters on those clips, copy the video only clip in the timeline first (cmd+c)... then after you perform the edit, right click on the new clip that includes the audio, and select "paste attributes" from the contextual menu that will show up... add the filter(s) back... or motion attributes if you've changed those).
Jerry

Adjusting audio of multiple clips in the timeline simultaneously

Is there a way to adjust the audio volume of multiple clips in the timeline simultaneously?

Or you can send the whole things over to Audition and work in multitrack there.
I like to get everything edited in Prmiere and then send the audio (I never bother with a refernce video) to Audition for finish work. There you can apply effects to individual clips, individual tracks or the entire mix. I always put a hard limiter on the Master track at -3dB to prevent clipping. Since this is the last filter in the chain I can boost other clips first and still know that my audio will never be too loud

FCP7; "unmerge" merged audio and video clips in the timeline?

Our TC was way off in some areas due to a bad timecode lemo on set. My editor synched by slate then merged the video with an audio mixdown track using the in points. Now when I export an EDL the original TC from the audio clip is gone, so he has no reference for matching up the audio. Does anybody know of a way to un-merge these clips and restore the original filename (audio takes the name of merged video but reveals correctly in finder) and timecode? Thanks.

what happens if you match frame the audio? I would think it would match back to the source audio clip which you could then use to replace the audio in the timeline.

Normalise audio for all clips in the timeline ?

Is it possible ? At the moment, I am doing it clip by clip. I want to do it for all and then probably modify separate clips of high noise down or dialogues a bit up.
Selecting all the clips and then going to audio properties disables the Normalise Audio option.

Thanks,
I selected the first image and everything to the left them deleted (event though I could not see anything in the timeline). I then had to replace the first image and could move the timeline to where it needed to be.
Could not see anything in the way but there must have been something somewhere.
Thanks

Toggling between video clips (not audio clips) in the timeline

Hi,
I was wondering if there is a solution to this small inconvenience I am experiencing in FCP 5. When I have snapping enabled, and press the down arrow key, the playhead jumps to the next audio or video clip in the timeline. I am trying to find out if there is a way to jump between video clips only.
Thank you
-Peter

Thanks,
Do you know if there is a way to make the up/down arrows snap to only the video cuts on the video clips in the highest video tracks in the timeline? Thanks.

How do I use just the audio from a clip without the video?

Can't remember how to use just the audio from a clip, without the video. FCP X can't select like FCP&

Edit just the audio into the timline.
The disclosure triangle next to the edit buttons.

How do I put the audio from one clip over the video of another clip?

So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

This thread seems to be on the same subject and is very helpful.
http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

Relink audio to video clip pasted in timeline in FCP7?

Hi, I need to add the original synced audio back into a montage I made in FCP7. I originally made the montage by pasting video clips into the timeline without their corresponding audio - instead of simply pasting video and audio for each clip and muting the audio like I used to (somehow I thought this new way would be easier). Each clip in the montage was cut using in and out points on their respective source clips, but in some cases I've used those source clips for other sequences so the in and out points I'd used for the montage aren't all still saved. What is the easiest way to reinsert each clip's audio without manually cutting each in and out point again?
Sorry if this is a beginner's question! I hope I explained it well.
Thanks,
Adam

Park on the first frame of the clip. Press X to mark IN and OUT on that clip. Then press F to matchframe to the source. Then F10 to cut the clip, and it's audio...into the sequence.
If you map the audio tracks first, then it's very quick. X...F...F10. X...F...F10.

Can only see first and last frame of clip in the timeline HELP PLEASE

Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is there any way to make all the frames show. By "all the frames", I mean the clips fill with frames.I liked to see all the frames in the timeline, it is easier for me to select and trim the bits out.
My specs are Core 2 Duo 6750, Nvidia 8600GTS, 4G Ram, Vista Home Premium. 3 HDD 3TB.
Thank you for answering
Werner

As for the GUI, PrE had one more like PrPro (the early versions), up through PrE 3. With PrE 4, they streamlined the GUI (and some of the operation), and went with the "dark look." PrPro went in that direction starting with CS3, and now, the two programs' GUI looks more alike - darker. Personally, I like PrPro 2.0's brighter GUI. Now, one can alter the brightness, but the contrast can work against doing much of that - give me the lighter GUI....
The look of PrE 4 thru PrE 9 is very similar, though things have moved about some. Still the look is similar. Same for PrPro CS 3 through CS 5.5.
As for the trial, things have changed in PrPro, as of CS 5.5. Once, the PrPro trial was very crippled, but had no watermark. No more. No crippling, and still no watermark. The trial for PrE is far less crippled, but does have the watermark. We do not know what changes might be coming with the trial of PrE10. We will just have to wait and see. One great option that Adobe offers is the 30-day, money-back guarantee. If you buy Premiere (either flavor), and use it for 29 days, but do not like it, then you return it for your money back. This is the full-paid version (both flavors) with nothing crippled, and no watermark. Not that many companies make such an offer. Basically, on can use the trial for 30 days, to see some of the powers of the program, and then buy it, and try it fully for another 29 days. If not completely satisfied, they get their money back - essentially a 59 day trial.
Were I doing AVCHD, I would definitely look at buying PrE 9, and giving it a 29 day shakedown. The only caveat is that AVCHD requires a lot of computer "horsepower," and not all computers (especially if more than a year, or so old) are up to that task. I find it amazing that a consumer format, like AVCHD, requires more computer power to process, than most professional formats, until one gets up to, say RED 2K/4K. However, that is the nature of the H.264 CODEC, and by that, I mean all H.264, not just the AVCHD version.
Good luck and happy editing,
Hunt

How can I move a clip on the timeline less than one frame?

I need to move an audio clip on the timeline to match the video but it snaps one frame at a time and I need to move it less than that.?

I've just had a look.
Try
Edit
Keyboard Shortcuts
Panels
Program Monitor Panel
Program Monitor Panel Menu
You should then find this:
You can then set up your preferred shortcut key.

Something happened, now I can't select clips in the timeline of my current project(in Elements 4)

I've been working on a project for a few days now, everything's been fine. Last night while editing, something happened when I was trying to add a transition between two clips. Now I can't select or edit any clips in the timeline anymore, and can't add new ones. When I click on the clips in the timeline, nothing happens. When I try to drag the select box around several of them, same thing. It acts like there's nothing to select. Same thing with right clicks, soundtrack mp3s, etc. The clips ARE still THERE though, and they all play fine in the preview screen in real time, and when I drag the slider back and forth along them.
All the clips are already rendered except the one transition I was adding when this started. When I hit 'Enter' to render, though, it says "Rendering 1 of 6 Audio Previews" instead of the usual x-number of video previews. I've not seen that before so it probably has something to do with all this.
It's ONLY with this one project. I can still edit and select clips in all my other projects as before.
I've already tried loading other projects and then coming back to this one, as well as closing the program and re-opening it. My current project is still stuck like this but the others are fine.
Please keep all this info in mind. This can't have anything to do with codecs or the clips being in the wrong format for the program. They're all regular AVI files and MP3s, I've been selecting and editing every single clip on this timeline dozens of times over the past few days with no problems. I'm just suddenly not able to select or edit them anymore or add anything new to the timeline, but they still play normally as previews.
I'm really hoping this is a simple thing where I've just tripped some setting and accidentally saved it that way and it can be easily changed back.

OK, then all that I suggested here:
Now, Exit from PrE, and Shutdown the computer completely. Wait a few moments, and then do a cold boot, launching PrE and Opening that Save_As Project. Do you now have the ability to edit the Clips on the Timeline?
If not, go to the location where you Copied the AutoSave folder, and view the files with Detail View ON. Then, look at the Date/Time of the files (probably will be 5 of them). Choose the last one written, Open that, and test. If no change, work backwards to the oldest.
If nothing is working, the only thing that comes to my mind would be an issue with the display driver, BUT that should affect all Projects, and not just this one. However, updating the video driver is always a good step, and should not hurt anything.
Note: many MP3's can cause all sorts of problems. I recommend always converting them to PCM/WAV @ 48KHz 16-bit, and replacing MP3's with those WAV files. One can use the great, free audio-editor, Audacity, to convert the MP3's.
If all of the above tests fail, let us know, and if you get any error, or warning messages, copy those down completely, and post those
all failed too?
If so, there is nothing that I can suggest. It seems that your Project is hosed, and is very likely not recoverable.
Sorry,
Hunt

How do I lock clips on the timeline?

Hi,
I am compiling music videos, taking the best grabs from 6 to 10 takes of a song which the band played along with the studio recording of the song.
The sound track is therefore the synch mechanism.
I am lining all the takes up above each other in synch with the master audio track.
My problem is that when I make cuts in the various takes the clips all ripple backwards and I have to constantly keep re-synching the clips.
I have used this method previously in Premiere Pro 6 which had a padlock symbol at the left hand end of the tracks which was used to lock or unlock the clips on the timeline.
Is there a control key that will do this for me in Premiere Elements and if not, could you suggest another way to get around this problem?
Thanks,
Nick
PS an unrelated question: Can I run Elements 9 on my laptop? (2 gb Ram, 1.66ghz intel centrino duo). I know that the processor speed is lower than recommended but am wondering if it will just run slowly or not at all.
Cheers

PRE does not have a lock feature. By default it ripple deletes (i.e butts the clips either side of a cut). To override this right-click and select clear or use [Shift]+[Delete].
Personally I think you would find the experience unpleasant running on that laptop, but the best thing to do is to install it and see (your licence allows you to install on two machines providing both are not in use at the same time).
Cheers,
Neale
Insanity is hereditary, you get it from your children

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

Video file diseppear when draging the clip to the timeline

When I drag my video clip into the timeline the video sequence diseppear, the audio is the only thing that is able to drop into the timeline. The problem arose a few days ago, i think i messed up some settings but I do not know what I did. What should I do?

Do you have your source patching and track targeting correct?
MtD

CS3: Re-connect audio to a clip on the timeline

Similar Messages

Maybe you are looking for