Cs3 slide presentation convert to html5 in cs6

I've made several websites in Flash CS3 with a Flash slide presentation on a Windows 7 platform. Now i wish to convert them in Flash CS6 to html5 with toolkit for createJS. I recieve the following notice: Documents with slides and forms by this Flash version is not supported. Open this document in an earlier version.  Is there anyone who can help me with this problem because i really want to convert my slide presentation to html5 , otherwise the sites are not visable on a Apple i-phone or i-pad. Thank you. Nikolien from the Netherlands

Thank you for your answer. Is there any way to publish my cs3 slide presentation with actionscript 3?
I've manage to convert such a slide presentation to html 5 with toolkit for createJS but that file contained only one slide.
Maybe is there a possibility to create one slide from a file that contains several slides?
Or are you saying that there is no way to convert this slide presentation to html5 at all?
With regards
Nikolien

Similar Messages

  • Slide presentation loading bar

    Hello,
    Is there a way I can add a loading bar to each slide in a
    presentation? I want to create a frontpage component for a web site
    using Flash CS3 Slide Presentations. I have several flash movies
    that I want loaded into the presentation and then use the
    presentation to let the user navigate between these movies (one per
    slide).
    Where should I place the preloaders?
    1. Individual movie timelines (these movies are imported to
    each slide using the UILoader component)?
    2. Individual slide timelines?
    What happens to slide transition effects in each of these
    cases?
    Thanks in advance for helping,
    -V

    James Mamakos wrote:
    I cannot open or run the later solutions people provided since they're all in 8.6 - too big for my lowly 8.5! Could someone down-convert a few of the later ones please?
    Which ones? There were many that were posted. Since you said you are trying to make this compatible with 6.1 you won't be able to use them anyway since LabVIEW 6.1 does not support .NET.
    The AxtiveX control references i've found which look(ed) hopeful are from the Microsoft Windows Common Controls 6.0 (SP4) Version 2.0 library. They are the ProgressBar (MSComctlLib.ProgCtrl.2), and the StatusBar (MSComctlLib.SBarCTRL.2). Any ideas for if i was to venture down this road or is this unwise?
    The StatusBar is the wrong one to use. That's just what appears at the bottom of the window. Using the ProgressBar is fairly simple. Example.
    How could I simulate a progress bar with 256 'segments' (257 sliders)*?
    Either that, or is it possible to have a two-colour texture in one
    'segment' where one colour at one end fades to the other colour at the
    other end? By 'segment', I mean the space between two sliders.
    This
    is an attempted work-around for not having much success trying to use
    an ActiveX control reference for the windows progress/status bars.
    * I'm not too keen on creating 256 progress bars to replicate my current method for getting a graduated colour fill on the slider!
    What is your ultimate goal? To get something that's compatible with 6.1 or to get a graduated color? Or both? The MS ActiveX ProgressBar will not be graduated, but it will work with 6.1. If you use a horizontal slide then you can create a bunch of sliders to get your graduated fill. Depending on how fast it's moving or how wide filled bar is you may not need 256 as the human eye may not be able to perceive a harsh jump in color if it's below the detection threshold. 

  • CS3 bug?  Copy and paste to Slide Presentation

    Using CS3 in a standard AS2 Flash file,
    When doing:
    Select all;
    Copy Frames;
    Then pasting in a new empty Flash Slide Presentation, with
    the exact same stage size, in Frame 1 of Slide 1using:
    Paste Frames;
    All of the newly pasted contents are offset, as if the center
    is at the top left of the Stage. This
    Is this a bug, or am I missing something?
    - C

    Report issues here:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Dan Mode
    --> Adobe Community Expert
    *Flash Helps*
    http://www.smithmediafusion.com/blog/?cat=11
    *THE online Radio*
    http://www.tornadostream.com
    <--check this
    *Must Read*
    http://www.smithmediafusion.com/blog
    "Cadevous" <[email protected]> wrote in
    message
    news:f3h9l0$l4f$[email protected]..
    > Using CS3 in a standard AS2 Flash file,
    >
    > When doing:
    > Select all;
    > Copy Frames;
    >
    > Then pasting in a new empty Flash Slide Presentation,
    with the exact same
    > stage size, in Frame 1 of Slide 1using:
    > Paste Frames;
    >
    > All of the newly pasted contents are offset, as if the
    center is at the
    > top
    > left of the Stage. This
    >
    > Is this a bug, or am I missing something?
    >
    > - C
    >

  • OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

    If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.

  • Flash slide presentation

    Hey hi
    I am trying to make a slideshow/movie with the slide
    presentation feature. I use flash cs3 on a mac, but I don't think
    that matters ?
    I have put all my photos I am using onto into individual
    slides. I have set cue points.
    When i test it, nothing happens. It doesnt go to the next
    slide.
    I am trying to redo the opening on
    mogullife.com but with more photos
    and a different song. I have done exactly what I want done on a
    keynote presentation, but when I export it to flash, the
    transitions will not work, so I am here.
    Can someone please point me in the right direction? You can
    message me on here or on ichat or on myspace or email or call or
    snailmail. Anything. I really wanted to do this soon.
    Thank you in advance for any help.
    samantha
    myspace.com/samanthadarling

    From your description, it sounds like you have each of these
    5 screens
    stacked one on top of the other, maybe each is in a different
    layer,
    maybe some other method.
    It sounds like you are setting the alpha property of the
    clips or the
    individual elements to 0. If that's the case, then, yes, the
    buttons
    will remain active. If you change the visible property to
    false, the
    buttons will not be active.
    Another method for showing this content would be to place
    each screen's
    content on a separate frame. So that you have only the
    content that you
    want on any given frame. Then you can navigate from frame to
    frame
    without concern for the other content.
    Rob
    Rob Dillon
    Adobe Community Expert
    http://www.ddg-designs.com
    412-243-9119
    http://www.macromedia.com/software/trial/

  • Slide presentation question

    I have a slide presentation that I created that uses arrows or the spacebar to click from slide to slise. Now the client wants it to play automatically with no user interaction required. Does anyone know how to convert this? I'm in Flash CS4.
    Thanks!

    If you are using AS3 then add following code. The initial code generates timer of 1 second. Add your code for moving to next slide inside function "timerHandler()" and you should be done.
    var myTimer:Timer = new Timer(1000);
        myTimer.addEventListener("timer", timerHandler);
        myTimer.start();
        function timerHandler(event:TimerEvent):void {
                trace("timerHandler: " + event);
    Refer to below live doc for indepth details:
    http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/utils/Timer.html

  • No ActionScript 3 support for Slide Presentations?

    I noticed that in CS3, the Slide Presentation format does not
    support AS3. I have searched every inch of the web including this
    Adobe site, and I can't find any information on this. Is Adobe
    ending it's development and/or support of Slide based Flash? Is
    Adobe fazing out the Slide Presentation format?
    Although I am not a big fan of Slides, I am directed to
    develop courseware using it... So, this is a very important
    question for future development.
    Any Comments on this?

    Simple, I always upgrade flash, and upgrade my knowlegd about
    new features. I did it from as1 to as2, and I'm trying to do this
    to AS3. But, some features are disapeared like, accordion, slide
    presentation classes,
    I know that AS3 is better ans faster, so, I need more reasons
    to want migrate to it?

  • Need help choosing Software for a Slide Presentation

    I'd really appreciate some advice....I need to make a slide presentation with an audio soundtrack. There don't need to be any fancy special effects as the slides transition. A simple fade in & out is all I'm looking for. All I need is for some of the slides to show longer than others (maybe 6-8 secs. vs 3-4 secs. for the rest.) There are about 250-300 slides which I have in i-photo and the soundtrack will be 4 tracks I have in i-tunes. I need to be able to burn the presentation onto a DVD once it's assembled. Will the Keynote application in i-works do this or should I use something else?
    Any help would be most appreciated.
    Thx in advance, Malco
    powerbook g4   Mac OS X (10.3.9)  

    Welcome to the discussion boards, malcoinc . It sounds like what you want to do would best be accomplished from within iPhoto itself, using its slideshow functionality -- I believe it has all the capabilities you are looking for, including sending the slideshow directly to iDVD once it is completed. I'd suggest reading the iPhoto documentation on this feature before considering moving to some other solution, as anything else is likely to be more complex.
    PowerMac G5   Mac OS X (10.4.4)  

  • Flash Slide Presentation Format vs Flash File

    I mistakenly made a fairly robust animation (15 layers about 5 min long with sound) in a Flash Slide Presentation document. The entire animation sits in slide number 1 (no other slides in this doucument).  I need to take this animation out of the Slide Presentation mode an put it into a regular flash file because other applications are reading the presentation holder slide and not reading the animation. Is there a way to get rid of the "Presentation (parent) holder slide or do I need to copy the whole thing to another document? If so how do I do that? Thanks in advance for your help,

    shift-click and drag across all the frames of your animation to select all the frames, then right click and click copy.  go to a new swf and right click on a frame and click paste.

  • Flash Slide  presentation and movieclip looping

    Hi,
    Im having a problem with the flash slide presentation. I have
    on the main timeline of one of my slides a movieclip. When i play
    the movie, the clip will loop endlessley. I would like the movie
    clip to play just once. In a regular flash movie this would not be
    a problem - i could put a stop action on the last frame of the
    movieclip. but, doing that in the context of a flash slide freezes
    the movieclip at the begining so it does not play at all..
    help!

    Ok, Ive managed to solve item 2. - if you set in the slide
    component inspector - "playHidden=false" then the slide animation
    will restart any time you reenter the slide. Im still lacking an
    understanding of how to stop a motion tween from repeating itself
    when it's contained within a movie clip as a motion tween timeline
    cannot recieve fram actions apparently...

  • Flash Slide Presentation...how to control volume?

    Hello,
    I am working in Flash Slide Presentation mode. I have a
    started a sound file playing on the "master" slide and I want it to
    play throughout my entire presentation. However, on a couple of
    slides, I want to play some short voice clips. How can I "turn down
    the volume" a bit on the main sound file so as to hear the short
    voice clips? And then turn it back up when the voice clip ends?
    I understand basic Actionscript. Can anyone tell me the code
    or point me to a tutorial which I can use to accomplish this?
    Thanks in advance.

    Ah, I was tying the (unavailable ) controller number and I didn't see the pitch controller option spelled out in plain sight!

  • Flash Slide presentation - mouse wheel

    Hi
    Is it posible to custom flash slide presentation to respond to mouse wheel ?
    can it move to next and previous scene by moving the mouse wheel?
    Please advice

    i am working in AS2

  • Help with slide presentation

    I'm looking for help in uploading a slide presentation to one
    of my websites. I am using Dreamweaver and followed directions step
    by step. When the presentation is viewed in the preview browser it
    is beautiful - when I upload it to my site, all i get is empty
    boxes with a little red X where the slides should be -
    I'm not sure what I'm doing wrong or not doing right
    Any help will be greatly appreciated.
    Thanks,

    You also need to be absolutely sure you have the name in the
    code set to the EXACT name of the file on the server
    On your local computer (at least for Windows) you may use
    MyPic.jpg or MYPIC.JPG and the file will load... but those are two
    different files on a server, so if your code says MYPIC.JPG but the
    file is actually MyPic.jpg it will not load

  • My slide presentation (with sound) is done. How can I change one song from another?

    My slide presentation (with songs) is done. How can I change one song from another?

    Do you still have your Aperture Slideshow project? Then open the slideshow and select the one of the green audio file clips in the film strip that you want to replace. Press the "delete" key and drag another audio file from the Media Browser directly onto the slide, where the sound should start.

  • Slide Presentation Workflow Help

    I need to put together a slide presentation and have not done this before.
    Can anyone help with details regarding a workflow and other items?
    1. For instance, can I gather up all my images in Aperture, move these in some manner that retains the resolution and put them in Keynote?
    2. Is there a minimum resolution for images looking good for projection on a screen?
    3. Is there a way to see this in some manner as an "actual size" or otherwise check this globally?
    4. Is there a way to manually do a slideshow in Aperture instead of Keynote?
    Any other technical help would be greatly appreciated.
    I will be working on my MacPro where my Aperture Library resides but I will be presenting on the MacBookPro laptop.
    Also, I am new to Mac.
    Thanks,
    Jon

    Hi Neil.
    The images are in all sorts of formats I would imagine. They are probably in psd, jpeg, tiff, png and other formats.
    I was mentioning png because my understanding is that along with tiff it is a lossless format. This is good for saving images that you are editing (which I may do in this case). Perhaps I am mistaken here but this is the reason for the post.
    The guy that is handling this is new in his job. So, I am trying to make sure I get this correct.
    I am not sure about the question about a second macbook (perhaps I have confused you somewhere)? I have a MacPro (this is what I am working on because the APERTURE DATABASE) is on this computer. I may have to work on the presentation while on the road with the MacBookPro - but I definitely will have to give the presentation on the MacBookPro.
    My assumption is that the issue here is two-fold. 1. If I need images before, during or after the presentation I will have to do some kind of access of the other images not in the presentation by booting off an external drive with the original Aperture Database. 2. As I will be (likely) both exporting the images out of Aperture /and/ transferring a Keynote (or Aperture) presentation file to another machine - I would like to know if there are any issues to be careful about. For instance, when saving to pdf for a manually forwarded presentation - one needs to check some Preference Setting to make sure that the presentation opens in full screen, otherwise it opens in preview mode.
    1. Can you help with any of the above questions?
    2. Is it necessary for me to bring my own connection?
    3. Is it necessary for me to know the projectors aspect ration and if so for what reason?
    4. Why do you suggest looking at the images on my screen to see if there is a difference between a 10 and a 12 setting? I have a 13" screen and this comparison seems like it would not hold up when projected over 30 feet or whatever.
    Also, I don't understand your reference to "sooner or later the images are going to get cropped".
    Have we determined that you cannot do a manually forwarded presentation in Aperture?
    Thanks.
    Jon

Maybe you are looking for