CS3 Split View Change

How do I swap the code & design views in CS3 so that the
code view is on the bottom? The online help file points to submenus
that do not seem to be there.
Thx, -Barry

That just changes focus from one to the other... doesn't
actually switch the
windows.
To the OP: see if there's anything under the
WINDOWS>WORKSPACE section
that may suit your work flow.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"DC_Eric" <[email protected]> wrote in message
news:f41aik$gon$[email protected]..
> Don't have an answer to your questions; however I don't
even use the
> buttons. I just hit ctrl ` at the same time and it will
switch views.

Similar Messages

DW9 (CS3) split view not work with ASP files?

I just installed and ran DW CS3 (ver 9.0 bulid 3481) -- I use
"coder" view for the screen layout. I like the split-view style
since I code inline HTML with my ASP and ASPX code. However, the
new version has the split-screen view button grayed out. How do I
enable split view when I edit files that are not just ending in
"htm" or "html" extensions? If the Adobe programmers made an
ASSumption then they need to issue a patch and remove it pronto. I
do not want someone else making decisions on how I do my work...I
get enough of that from Microsoft already, I do not need it from my
tools also. Please forward this to the developers if there is no
way to change my preferences, otherwise please tell me how to edit
a config file or hex-edit the executable to get this funtionality
back. TIA!

I still can't figure out why the split view or design view is
grayed out and not accessible when editing files with an .asp or
.aspx extension and it is driving me crazy! I called the support
line and got someone in India who didn't understand my problem. 30
minutes later I finally got her to agree to transfer me to
secondary support but they were busy and she promised me they would
call the next day. That was over a week ago. I didn't even get a
voicemail, even though I stayed by my phone the whole day. I see
that support for DW under Adobe is no better than it was under
Macromedia...how sad. Microsoft Expression Web is looking better
and better every day....... :(

Dreamweaver CS3 Split View Issue

Hello All,
I just got the new dreamweaver CS3 and when working in split
view nothing is refreshing correctly. What I mean is, if I click on
some text in the design portion of dreamweaver to try and change
the font, css assignment, or whatever I cannot. I have to click on
the text, hit refresh (f5) and then the correct information in the
properties panel shows up. I have the same problem when selecting
something in the code portion of the split; it does not select the
portion in the design section. What is the deal? Dreamweaver 8 did
this fine.
Anyone else have this problem?
Alex

What OS? Does the problem happen with all files and all
sites, just some,
or just one?
David Alcala
Adobe Product Support

Split view changed

I am creating a photo book, and I was using split view to place my photos into the photo book. Originally, the photos I was placing into the book were on the bottom so I could scroll across and place pictures in photo book where I wanted them (photo book was above).
Then something changed with the split view, now the photos are on the left hand side and I scroll down to place photos into the photo book on right side of screen.
This view is extremely fustrating and I can not figure out how to get split view back to the original format. The other issue is that with this "newly" formated split view I can not use the pictures more than once, with the "old" split view I could use a individual photo more than once to use for background etc...
If someone knows how to change the split view format please, help. I do not understand how this changed and I can not get it back.
Thanks!
Happy Aperture User!

Aperture is large, complex, and powerful. Before using it to store or manipulate any valuable data files, you should read and understand at least the first seven chapters of the User Manual. The UI and the general workflow are laid out pretty well. Spend some time with it, and ask here for clarification of things that don't make sense to you.
(Added:)
The chapter on using the Book Album to create Books is here.
Message was edited by: Kirby Krieger

Magin change moving from Design to Split views

For some reason, the margins of my HTML page change when I
move from split view to design view. The page is a single table,
centered with <center>, but when I change views, they whole
thing shifts over by 19 pixels, from being centered starting at 309
to being centered starting at 328.
What the heck!?? Anyone know what might be causing
this?

Appearance of a vertical scrollbar?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"D Cam" <[email protected]> wrote in message
news:fbt85u$cpv$[email protected]..
> For some reason, the margins of my HTML page change when
I move from split
> view
> to design view. The page is a single table, centered
with <center>, but
> when I
> change views, they whole thing shifts over by 19 pixels,
from being
> centered
> starting at 309 to being centered starting at 328.
>
> What the heck!?? Anyone know what might be causing this?
>

DW-CS3 / Split/Design View grayed out

In Dreamweaver CS3 (9.0.3453), when starting a new site, only
the CODE preview button is available - Split/Design views are
grayed out.
Also, everything in the submenu under View > Visual Aids
is also gray
Also, Refresh Design View is gray.
I'm a visual kinda guy, and haven't been able to find a fix
via Google.
NOTE: Everything was ok when first loading, then blew out.
Haven't been able to fix, and reinstalling doesn't work (I use Revo
Uninstaller to totally remove, so as to get a clean install -
nothing)
Many thanx for any help.
- LouisCat

I think it is probably the type of document you are creating,
for example if
you go to open a javascript or xml or css document, it goes
to code and
grays out the disign and split views. So you might be opening
the wrong type
of document.
Gary
"LouisCat" <[email protected]> wrote in
message
news:gbcucp$t6k$[email protected]..
> In Dreamweaver CS3 (9.0.3453), when starting a new site,
only the CODE
> preview
> button is available - Split/Design views are grayed out.
>
> Also, everything in the submenu under View > Visual
Aids is also gray
> Also, Refresh Design View is gray.
>
> I'm a visual kinda guy, and haven't been able to find a
fix via Google.
>
> NOTE: Everything was ok when first loading, then blew
out. Haven't been
> able
> to fix, and reinstalling doesn't work (I use Revo
Uninstaller to totally
> remove, so as to get a clean install - nothing)
>
> Many thanx for any help.
>
> - LouisCat
>

Split view for before and after changes?

One feature I used to use a lot on Lightroom as where it would show a split view showing the image before and after changes (adjustments). I cannot find how to do this in Aperture - is it possible, what is this feature called?
(and before any smart person tells me to look in help, I'm tired of responses like that. I've looked and didn't find, and that's why I'm asking here. I've tried Compare, and Before and After Changes etc.)

Unfortunately, no, there is no ability to do the split view like Lightroom has. It's a nice feature.
The closest you can do is to flip back and forth between two versions. Because when you view the master in aperture it shows the original file without crops and straightening, I suggest that once you crop and straighten, you then create a new version and work on that (this is as close as you can get to LR's "snapshot" functionality). You can then flip back and forth between the two versions to see the changes... but you can't see them side by side with a split.

What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

What type of add on can I download that will allow meto change the view of my emails in gmail? I would like to have them split view like outlook

Dear Sara,
I notice that you didn't reply to my questioning the this ambiguous stipulation of your services being extended to Adobe's rights in the use of my personal content or intellectual and creative property.
When I returned to my "files" section in Adobe Reader where they were transferred to in converting them to PDF they had all been removed. Around 6 projects in progress plus notes and several creative design images in one instance (attached to a writing project). I have access to the files and I am downloading Cloud desktop interface.
Does the interface of Reader in desktop automatically remove them from my online account, making them exclusively offline from here on OR must they be physically removed and so have they been removed by another party?
Finally, since they are made copyright in the conversion, must future files be made uploaded to signify and account for them as made copyright by the process record in my personal account?
Excuse my asking lots of questions. My work has been tampered with in the past and I am excited about this service I can avail of in protecting all of my work.
Yours Sincerely,Liam Anthony Dalton BA, FA

Dreamweaver CS3 Design View Problem

I am trying to edit a Dreamweaver site using Dreamweaver CS3 on a Windows XP workstation at work. The site structure was developed by an outside vendor and has been designed using CSS for positioning -- no tables. It is my responsibility to finish the site using template pages provided. When viewing the site in several browsers -- both Mac and PC, everything is fine. When I open the site in Dreamweaver CS3 Windows, all of the positioning is off -- the menus that should be flush left of the text colum, instead, appear at the top of the text column. This issue is repeated throughout the site. Since I am using existing pages as templates for new ones, I'm forced to make edits in code view, upload and then view in my browser. My outside vendor, so far, does not have an answer to this.
This weekend at home, I've installed an old Dreamweaver 8 trial version on my Macintosh. I downloaded the site and everything looks fine in Design View. Any ideas? Is this a settings issue on my Windows version of Dreamweaver? I do have the Style Rendering setting set to Screen Media type.

Hi,
I found this thread after searching and searching for an answer as to why my Design View in DW CS3 started disappearing (even in split view). It will show a partial view, but never the entire view all at once, even after restarting my PC. I have been using CS3 for a few years now and it just started having this issue. When this issue started, nothing had changed on my computer. There has to be a fix for this. Why did it work fine all these years and now, no design view????

DW Split View - Design View

When working in DW in Split View, when the user clicks into
the Design View window the view automatically updates the view if
code view has changed.
Can i intercept this? Does it call a specific file or menu
command that i would have access to?
The reason:
We use DW as a stand alone HTML editor and some of the files
we work with are extremely large and each time a change is made in
code view and tusers click into design view it auto updates the
deisgn view and this could end up taking some time. i would like to
manually control this if possible?
Thanks

I think it is probably the type of document you are creating,
for example if
you go to open a javascript or xml or css document, it goes
to code and
grays out the disign and split views. So you might be opening
the wrong type
of document.
Gary
"LouisCat" <[email protected]> wrote in
message
news:gbcucp$t6k$[email protected]..
> In Dreamweaver CS3 (9.0.3453), when starting a new site,
only the CODE
> preview
> button is available - Split/Design views are grayed out.
>
> Also, everything in the submenu under View > Visual
Aids is also gray
> Also, Refresh Design View is gray.
>
> I'm a visual kinda guy, and haven't been able to find a
fix via Google.
>
> NOTE: Everything was ok when first loading, then blew
out. Haven't been
> able
> to fix, and reinstalling doesn't work (I use Revo
Uninstaller to totally
> remove, so as to get a clean install - nothing)
>
> Many thanx for any help.
>
> - LouisCat
>

Can you set DW to always show split view?

This is not a major problem but an annoying thing and I can't seem to find. I almost always work in split view - never design view. Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Anyone know how to change this?
Thanks!
Ellie

>>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Yes, the same problem started in CS4-Mac for me.
Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
This seems to be pretty buggy.
Hopefully someone will post a solution.
...pt

My small split-view file manager

Hello.
I've created a small file manager with split-view. While some functionality is still missing, the manager is usable and I'm using it as my primery tool for file browsing.
You can get the browser from here http://github.com/napsy/gsfm
space - select/unselect
F5 - copy selection
F4 - rename selection
F3 - new directory
delete - delete selection
tab - change view
There is support for custom view with a config file. You put the config file inside your ~/.config directory. A sample config is provided with the source.
Sere is a screenshot: http://napotnik.info/images/gsfm.png

It's good that it's C and BSD-licensed, but I don't really see a point in GTK. I mean, there are a lot of GTK file browsers out there already, but there is no (to my mind) proper ncurses file browser written in pure C. It's just MC and vifm, all the others aren't C. So if it would be ncurses I would definetly be interested. That's just my opinion. Anyways, thanks!

Can't edit text in CS3 design view

Hi,
I have a big absolutely positioned DIV tag in most of my
pages, practically the whole page content is inside it.
In DW CS3 design view very often (maybe 50% of all times) if
I click inside it to edit the text, DW selects the entire DIV tag.
The cursor becomes like a cross with arrows, the DIV border becomes
outlined with a thick blue line, and I can't edit the text no
matter how much times I click. If I move the mouse with left button
pressed, this moves the DIV and changes the .css file where the
position is defined. DIV can't be de-selected with Escape, left or
right clicking.
The only way to get out of this is to click somewhere in the
code view, then go back to design view where hopefully text can be
edited. Sometimes I have to repeat this twice or even 3 times ,
it's extremely annoying and time consuming.
Is there any workaround?
Like to disable selection of containers in design view, or at
least a quick way to deselect the current selection?
This problem does not appear in DW8 when editing the same
files.
thanks

> I have a big absolutely positioned DIV tag in most of my
pages,
> practically
> the whole page content is inside it.
Nasty. Why?
Do you have an overflow style on this div?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"harpo_" <[email protected]> wrote in
message
news:f0igi1$3dn$[email protected]..
> Hi,
>
> I have a big absolutely positioned DIV tag in most of my
pages,
> practically
> the whole page content is inside it.
> In DW CS3 design view very often (maybe 50% of all
times) if I click
> inside it
> to edit the text, DW selects the entire DIV tag. The
cursor becomes like a
> cross with arrows, the DIV border becomes outlined with
a thick blue line,
> and
> I can't edit the text no matter how much times I click.
If I move the
> mouse
> with left button pressed, this moves the DIV and changes
the .css file
> where
> the position is defined. DIV can't be de-selected with
Escape, left or
> right
> clicking.
> The only way to get out of this is to click somewhere in
the code view,
> then
> go back to design view where hopefully text can be
edited. Sometimes I
> have to
> repeat this twice or even 3 times , it's extremely
annoying and time
> consuming.
>
> Is there any workaround?
> Like to disable selection of containers in design view,
or at least a
> quick
> way to deselect the current selection?
>
> This problem does not appear in DW8 when editing the
same files.
>
> thanks
>
>

Custom Split views don't work like the use to pre- Project 2010

Hi
Either we've lost some functionality along the way, or there must be another way of doing the following...
Up until and including version 2007, I was able to create multiple custom split views in a file (or global.mpt) where the I could specify a different Task Form (e.g., "Predecessors & Successors" or the "Work") depending on which custom
split view I selected.
In 2010 and 2013, you have to manually select the Task From you want; the custom split view won't can help you get the specific Task Form you want ((e.g., "Predecessors & Successors", "Work"). At least that has been my experience...
does anyone have a solution apart from needing to write a VBA event handler?
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

I agree with Dale. Project remembers the last set of details applied in form views such as Task Form. Using VBA event handlers you can change this behavior.
1. Open the project file on which this change should be applied.
2. In the View ribbon, click Macro command and select Visual Basic
3. If you want the details displayed in the Task Form to be applied to the current file, double click "ThisProject" node under the VBAProject(your file name) or else double click "ThisProject" node under ProjectGlobal (Global.MPT)
4. Paste below lines in the Project_Open event handler. Save the code.
Private Sub Project_Open(ByVal pj As Project)
    ViewApplyEx ApplyTo:=1, BuiltInView:=pjViewTaskForm
    WindowActivate TopPane:=False
    ViewShowPredecessorsSuccessors
End Sub
5. You can replace the last statement ViewShowPredecessorsSuccessors with another statement that is compatible with Task Form view
Sai PMP, PMI-SP, MCTS Project, MVP Project

Horizontal scroll not working in aperture split view

I had recently upgraded to mountain lion and the newest aperture, but I noticed a problem with horizontal scrolling in aperture split view. I am currently using a magic mouse, and it scrolls just fine within other applications except in aperture split view. (it doesn't go to the next picture when I gesture left and right) if I do it many times, it will change to the next picture but then stops scrolling again. I had tried to use a trackpad and it is better but I have to do it slowly and occationally it just doesn't work. It only happens only in Aperture and not in safari or other applications. Does anyone know the solution to this problem? Any little help is greatly apprecitated

The recent Aperture update disabled the "Scroll to navigate photos in the Viewer" option.
You may need to reenable it in the Aperture general preferences.
Regards
Léonie

CS3 Split View Change

Similar Messages

Maybe you are looking for