Cs3 stuck in paste mode

I have a multi layer psd and when I try to select a layer object and copy it, the copy function is greyed out and the only thing I can do is paste.
If I let it have its way, it pastes in a previous copy. After pasting, I try to copy again, but the paste function is the only one active. Something is stuck. I can not get PS CS3 to let me do a copy.
Any suggestions?
Bob

thanks guys... in fact that is what I did and if fixed it... I just had not got back to you yet.
Bob

Similar Messages

  • My iphone is stuck in recovery mode. it is about 70 percent done and won't move anymore. This has been going on for the past 2 days. itunes is stuck on the restoring iphone software. Please Help

    My iphone is stuck in recovery mode. The apple logo is up and proceeded about 70percent of the way then it just stops moving. I have looked all over the internet and I am out of warranty. On itunes it reads restoring iphone software. My software was 4.3.2 but it was in the process of being upgraded to 4.3.3 so i dont know if it is being restored to 4.3.2 or 4.3.3... Please help

    I still have the Same Problem. 

  • Iphone 5C stuck in Recovery Mode and will not restore

    Hi there, iv'e come across what seems to be quite a common problem at the moment.
    I tried to update my 5C to the latest firmware this morning and apparently something went wrong. The update was fine up until about 3/4 way through and then i recived an error message, error (12) to be specific, It now seems to be completely stuck in Recovery Mode as it continues to do the same thing when i try to restore it. Iv'e had previous iphones thta have went into Recovery mode but i easly got past this issue. Nothing i do seems to be helping it, iv'e tried restoring it about 10 times and the same error comes up every time. Iv'e uninstalled and re installed Itunes and still nothing.
    other than taking it to the apple store does anyone have any advice?
    (Windows Fire Wall is also turned off)
    Thank you!

    FIRST, edit your hosts file (which was corrupted by the jailbreak process) and remove any references to gs.apple.com; delete the whole lines and save the file. If you don't know how to do this you will have to get help, and it shows that jailbreaking was a bigger mistake than you thought.
    Next, connect to a USB port directly on the computer, not a hub and disconnect all USB devices that consume power or bandwidth (like USB drives).
    Put it into DFU mode to restore. With the phone disconnected hold HOME and SLEEP until a black screen appears. Immediately release SLEEP and continue holding HOME. While holding connect to iTunes and continue holding. After a while (perhaps several minutes) iTunes should recognize the phone. When it does release the HOME button and hope for the best.

  • Iphone 3gs stuck in recovery mode, will not restore or update error 36

    As the title states, I have a 3gs stuck in recovery mode.  Sort of worked earlier today, been having trouble with the battery draining fast/not holding charge goes into recovery mode on its own at times.  Have been able to force it out of recovery in the past but now it is just showing a USB cable going into an iTunes logo.  I can't get it to restore/update and before it got stuck it would not update or restore either.  Before you ask, I have no idea what iOS I have, this **** thing didn't start messing up until I plugged it into my computer.

    Update:  I have uninstalled and re-downloaded iTunes, Tried with a different computer, tried with a different iTunes account.  None of these did anything for me.  I have no idea what to do next, nearest apple store is more than an hour away.

  • HELP!!! iphone 3gs stuck in recovery mode

    I tried doing the latest iphone system software update and the **** thing got stuck in recovery mode! The 291 MB update downloads fine and it made a backup and then i assume it removed the old software and started installing the new software. It goes through the "Preparing iPhone for restore" and gets to the very end of it on iTunes and just stops. On the phone it has the silver apple with the status bar below it, the status bar gets a little bit of the ways done and then just stops as well. Then after a minute the iPhone says that I need to connect it to iTunes. This is where it sits and does nothing. If I disconnect the iphone and reconnect it to itunes itunes will tell me that it has detected a phone in recovery mode and needs to restore it. I say ok and it goes through the above process again and stops at the same point. What can I do to get it out of recovery mode? I dont need to save all my stuff that was on the phone, tho it would be nice.
    Thanks
    p.s. it is the latest version of iTunes

    The "hosts" file may be blocking the iTunes Store. Find your hosts file. The hosts file is normally found in the following location:
    Windows XP: C:\WINDOWS\SYSTEM32\DRIVERS\ETC
    1. Select the hosts file. Then click the Edit menu, and choose Copy.
    2. Then, click the Edit menu again, and choose Paste. There should now be a duplicate of the hosts file named "Copy of hosts".
    3. Drag the original hosts file to your desktop.
    4. Right-click the "Copy of hosts" file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    5. When Notepad opens, click the Edit menu and choose Select All. Then click the Edit menu, and choose Delete.
    6. Click the File menu, and choose Save. Close Notepad.
    7. Right-click the "Copy of hosts" file, and choose Rename. Type "hosts" (without quotation marks) and press Enter.
    8. Restart your computer and try updating again.

  • New 5th generation ipod wont install software and is now stuck in recovery mode

    I just received a 32 GB iPod touch 5th generation for Christmas today. I installed the newest version of itunes, backed up my former iPod to the computer and then plugged in the new one to add the software and restore it from the back up. After  the 3 hours of installing the software was almost done it said an unknown error ocurred. Now my new iPod is stuck in recovery mode and won't get past restoring the iPod. I have tried to go through it several times now. I really want to get this working, but I don't know what to do anymore.

    The problem is that it stops restoring. I go throught the recovery stage to restore it and not even a quarter of the way through it comes up with the message that an unknown error has occured. Every time i connect it to iTunes it tells me that it has detected an iPod in recovery mode.

  • How do i get the itunes on the computer acknowledge my ipod if it is stuck in disable mode

    how do I get iTunes to acknowledge my ipod wen its plugged into computer?? it is stuck in disabled mode so I cant acknowledge it threw my ipod.. what do I do??

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
      If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

  • IPhone 5 stuck in recovery mode loop, get error 9 when trying to update to ios 7 help me

    so i have tried every way (except a different computer because that option is not available right now). i wanted to reset (factory reset erase all content) my iphone 5 because it was being really wierd. id be using an app all the sudden it would just turn off, try to restart itself, never get past apple logo screen, crash, attempt restart again etc. only when i would hold home and power button it would start up the right way. anyway i went into my iphones settings> general> reset> erase all content and settings. BIG MISTAKE!!!!!!!! ever since then it just have been stuck in recovery mode. the first time i tried to restore it. i got error 3914 i think. doing a little research i found i needed to update itunes so i did (11.1.5.5). then it said i needed to download iOS 7 so i did. and when i try to restore it, i get error 9. itunes is up to date. my windows is up to date. ive tried everything i can think of and im gettin to the point where im gona throe it at the wall
    SOMEONE PLEASE HELPME

    And you have done all include here?
    http://support.apple.com/kb/TS3125

  • IPhone4 stuck in recovery mode after iOS5 update

    Hi guys,
    hope someone will be able to help.
    I bought a second hand iPhone 4 from ebay and all was well when recieved.
    However I then tried to update to iOS 5 a few days ago and iTunes said "an unkown error occured (-1)" during the restore and now my phone is stuck in recovery mode.
    I took the phone to a local apple store where a genius told me that the phone had had a "dodgy" repair in the past and so they were unwilling to work on it.
    I have tried many methods to exit recovery mode but none have worked.
    I will be happy to even stay on iOS4 forever as long as I get my phone back and workable.
    FYI, before the update to iOS 5 all updates  were succesful and never encountered a problem, the phone has never been jailbroke or hacked in any manor.
    PLEASE HELP!

    Look what google found! Amazing how that works eh?
    http://iphone-downloads.hubpages.com/hub/Fixing-1604-iPhone-Restore-Error--How-T o-Go-About-Fixing-1604-iPhone-Restore-Error
    also:
    *Error 1604*: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    1. Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    2. Restore and wait for error 1604.
    3. When prompted, click OK.
    4. Close and re-open iTunes while iPhone remains connected.
    5. iPhone should now be recognized in Recovery Mode again.
    6. Try to restore again.

  • Iphone4 stuck in recovery mode after failed attempt to update OS. how to fix?

    Hi,
    I tried to update my iPhone software (after successfully backing up to iCloud, and then successfully updating iTunes software) but got a 1604 error message.  The phone is stuck in recovery mode, and all attempts to restore the phone have resulted in failure.  I keep getting the same error message.  Basically, the phone never gets past "preparing to restore."  Please help. 
    I am linking my iPhone 4 to a PC Windows XP Professional, with up-to-date software.  This is the third time I've tried (and failed) to update the iPhone software, though the other two times I was able to restore.  This time nothing seems to be working.  Please help!  Thanks.

    Look what google found! Amazing how that works eh?
    http://iphone-downloads.hubpages.com/hub/Fixing-1604-iPhone-Restore-Error--How-T o-Go-About-Fixing-1604-iPhone-Restore-Error
    also:
    *Error 1604*: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    1. Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    2. Restore and wait for error 1604.
    3. When prompted, click OK.
    4. Close and re-open iTunes while iPhone remains connected.
    5. iPhone should now be recognized in Recovery Mode again.
    6. Try to restore again.

  • Word stuck in Draft Mode

    ONE Word file is stuck in draft mode. It can't be the normal.dotx file because it's not affecting other files. Starting in safe mode doesn't change a thing. All the tricks I've read on various forums about changing the columns etc don't do anything. I even
    tried checking the option to allow opens in draft, so that I could then uncheck it (since it was opening in draft even when that open was not checked). Nothing works.
    I read in another forum that the only solution is to select the entire contents of the document and save it to Notepad, so that it is txt. Then just start over. I have quite a bit of formatting and I'd rather not, but I guess it won't kill me.
    Any better ideas?

    I'm having this problem too. I use Word 2013. I'm tracking changes on this document, so cutting and pasting is not an option.
    And yes, I HAVE tried clicking on "View tab | Print Layout". Obviously, that was the first thing I tried. I tried it
    many times. I tried closing the file, reopening it, and clicking "View tab | Print Layout". I tried redownloading
    the file, opening it, and clicking "View
    tab | Print Layout". I tried having the file resent, both as .docx and .doc,, opening it, and clicking "View
    tab | Print Layout".
    It's not in protected view.
    Nothing has worked. Please let me know how to fix this.

  • IPhone 4s stuck in recovery mode. Error code (-1).

    I recently bought my iPhone 4s from a guy (who bought it from someone else). He sold it to me pretty cheap because when he bought it, one of his friends tried to restore it for him and it got stuck in recovery mode. I have no idea if the phone has ever been "tampered with" or not. He didn't seem to know much about it (said it was his first smartphone) and I thought I might have a chance of fixing it. I'm starting to lose faith in that...I've tried almost everything I can find. I know there are tricks for this all over the internet and I've tried almost all of them. TinyUmbrella does nothing, Redsn0w won't even install on my computer (frustrating!). Trying to restore from iTunes is useless. It gets to about 90% then comes up with error code (-1) and gives up. I've tried that route probably 20 times with no change. I know I could take it into Apple and they could look at it, but I have no information on the phone itself. I cannot get the serial number. Does anyone have any suggestions at all? I'll try anything that doesn't require me taking it to Apple and getting charged more than I paid for the phone to fix it....I run Windows 7.
    Thanks so much!

    Hi there...
    Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
    To start with, here are few things to you should make sure of:
    1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
    2-Restart your Windows.
    If still no luck, try editing the Hosts file, here is how;
    1- click on RUN then copy and paste the following:
    notepad c:\windows\system32\drivers\etc\hosts 
    2- look for gs.apple.com
    3- if there are numbers infront of it just delete them or just type # before the numbers.
    4- Save the file and try restoring again.
    Note: you should have administror access to edit the Hostes file.
             put your iphone in DFU mode before restoring.
    I hope this helps. It did for me

  • Trying to update iPod touch - stuck in backup mode

    I have a 2nd gen iPod touch and am trying to update the software, which iTunes is kind enough to remind me to do everytime I connect the iPod to my computer.  I have synched and backed up recently, or so I thought, before being able to download and install the update.  Now when I am trying to do the update it has synched again, but is stuck in backup mode without any signs of progress for the past hour.  It said it would take an hour or more to complete the update, but maybe they should reword it to say it'll take a day or more.
    The last time I tried to do the update and couldn't I finally downloaded an update to iTunes, hoping that would help but no such luck.  What am I doing wrong? 

    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • HT4623 my sons iPad is stuck in recovery mode and my his only option on iTunes says restore iPad and he does not want to do that. what do we do?

    My sons ipad2 is stuck in recovery mode. The only option on I tunes if to restore the iPad. However, he does not want to restore it and lose all of his things on the iPad.

    Does he have a backup on his computer or iCloud?
    You can redownload apps/music etc for free.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • Ipod 5th gen stuck in recovery mode.  Don't want to restore and lose all my data.  Any help would be greatly appreciated.

    ipod 5th gen stuck in recovery mode.  Don't want to restore and lose all my data.  Any help would be greatly appreciated.

    I one of these programs will not kick the iPod out of recovery mode you will have to restore the iPod.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    You may be able to get some info off the restored iPod by:
    How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html
    iPod recovery software to restore lost music files      
    -iPod touch Deleted Photo Recovery Tips You Should Know
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Referencing a method in one class from a constructor in another?

    Hi, I'm not sure whether this is a simple question or not, but instead of rewriting the method in another class, is there a way that I can reference that method, eg: public int getTitleCode() {         return titleCode;  }within the constructor of an

  • Clone a record in a table

    Currently using jdev 11.1.1.3 existing usecase 1. I can add a new record(page has blank input items) - using add button 2. can update the same record(page has fields populated - except PK field not editable) - using save button new usecase extension

  • Audition CS5.5 constantly crashing during editing

    I am running Adobe Audition version 4.0 Build 1815 on 64-bit Windows 7 Professional edition.  Audtion used to run great for the last 12 months or so, but recently - during last 4 weeks or so - it crashes unexpectedly during an edit session.  While sa

  • Package doesnot exists????

    Hi all, My Jdev version is 11.1.2.3.0. The application was working very fine. later i created AppModuleImpl.java and added one method to AppModuleImpl.java. After adding one method in AppModuleImpl.java getting error after running page package doesno

  • Error in parked document

    While posting the parked document I am getting the error " No batch input data for screen SAPMZSERVTAX 2000" please help...