CS3 to CS4/CS5-- Book TOC crashes but not in chapters
Hi, i'm having a conversion problem again,
i'm working within a book (like always) and i have a main TOC, that regroups styles from all the documents, in CS3 i had no problem with it, but in CS4/CS5 it makes ID crash and i have no idea why. the thing that is even more strange is that every document inside the book has its own TOC (with more styles) included, and they do not crash my InDesign. It seems to be only the one that "reads" the styles across the book that do so.
Anybody has an idea why?
i get this error message :
Thanks in advance!
Message was edited by: korinsama
edit that needed a bump :
since my TOC in for the book differs from the TOC in each chapter, i tried importing the one from the chapters (the one that technically doesn't crash)
... but once in the book TOC when i check 'include book documents" ... well... it crashed... so i'm guessing it's not the TOC styles that have a problem but the fact that i'm trying to apply it to the whole book ..... which... is really problematic...
retested the original TOC, just unchecked the "include book documents" and it didn't crash..... i wish there was a detailed crash log so i could understand what's going on... it's kind of ridiculous that i can generate a single document TOC but not the exact same one applied to a book....
soooo the good news is, i can generate each chapter individually and copy/paste into the main TOC, which is good since in earlier version of INDD, copy/pasting TOC made it crash.. and it doesn't anymore
Message was edited by: korinsama
Similar Messages
-
Some programs crash but not in safe mode or for guest user
Hoping that some talented and kind Mac wizard will help me solve a bizarre problem: Some but not all of my programs have started crashing immediately upon launch, but not in safe mode, nor when I log in as a guest user.
The problem began on February 5th, right after I installed an update to my OS (bringing it up to version 10.7.3), which included an update to the firmware for my computer, a Mac mini from mid-2010. The programs that began crashing upon launch *may* be those that were open at that time, but I can’t be sure. They include Adobe Reader, Picasa, Word for Mac, and a sweet little utility called uCalendarX.
Specifically what happens with, say, uCalendarX, is this: After I launch it, nothing appears on screen for a few seconds, and then comes a message that it is trying restore its windows, with a choice of whether to attempt restoring them or not. After a few more seconds comes the news that it has quit unexpectedly. The first several dozen lines of the crash log appear at the end of this posting.
So far my troubleshooting has revealed the following:
(a) When I reboot in safe mode, the programs that crash now work normally.
(b) When I boot the usual way but log on a guest user, the programs that crash now work normally.
(c) Fully emptying the trash made no difference.
(d) The problem was not solved by restoring my hard drive (via Time Machine) to its state the day before I downloaded that update to the OS and the firmware. (This was a drastic step, the intervention of last resort, and I was sure it would work. But no. Perhaps I did not go back far enough for the restoration.)
(e) Deleting the plist files and plist.lockfiles made no difference.
(f) Deleting the files for the app under Saved Application States made no difference.
(g) Disabing the user’s font cache (as happens in safe mode) made no difference.
(h) Uninstalling Adobe Reader, emptying the trash, downloading the latest version, and installing that made no difference – this latest version newly installed continues to crash (but not for a guest user, nor for me, the administrator, in safe mode).
(i ) Repairing permissions on the hard drive made no difference.
I will be mighty grateful for a solution to this perplexing, vexing problem!
B.t.w., I don’t know Unix but was able to do all those (fruitless) interventions listed above.
Gordon Bear
Ramsey NJ U S A
The log from one of the many crashes of uCalendarX begins as follows:
Process: uCalendarX [750]
Path: /Applications/uCalendarX 3.2.3/uCalendarX 3-2-3.app/Contents/MacOS/uCalendarX
Identifier: com.riuz.ucalendarx
Version: 3.2.3 (3.2.3)
Code Type: X86 (Native)
Parent Process: launchd [289]
Date/Time: 2012-02-20 00:38:48.931 -0500
OS Version: Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report: 2463 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 30 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: 0CA8DA26-8927-4AC3-B35F-3B2E9FD65A8E
Crashed Thread: 4
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000008bcc45ab
External Modification Warnings:
Thread creation by external task.
VM Regions Near 0x8bcc45ab:
CoreServices 0000000004fd0000-00000000051ee000 [ 2168K] rw-/rwx SM=COW
-->
__TEXT 000000008fe52000-000000008fe85000 [ 204K] r-x/rwx SM=COW /usr/lib/dyld
Application Specific Information:
objc[750]: garbage collection is OFF
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x920136e6 __open + 10
1 libFontParser.dylib 0x9cc5b403 TFileDescriptorContext::TFileDescriptorContext(char const*) + 77
2 libFontParser.dylib 0x9cc5b1c5 TFileDataReference::TFileDataReference(char const*) + 65
3 libFontParser.dylib 0x9cc5b056 TFileDataSurrogate::TFileDataSurrogate(char const*, bool) + 136
4 libFontParser.dylib 0x9cc59af3 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 2581
5 libFontParser.dylib 0x9cc58a7a FPFontCreateFontsWithPath + 193
6 libCGXType.A.dylib 0x950164b0 create_private_data_with_path + 26
7 com.apple.CoreGraphics 0x95349ecf CGFontCreateFontsWithPath + 33
8 com.apple.CoreGraphics 0x95349b09 CGFontCreateFontsWithURL + 442
9 com.apple.CoreText 0x90e1c1aa TCGFont::TCGFont(__CFURL const*, bool) + 90
10 com.apple.CoreText 0x90e1bfb2 TCGFontCache::CopyFont(__CFURL const*) const + 92
11 com.apple.CoreText 0x90e1be6c TBaseFont::CopyNativeFont() const + 50
12 com.apple.CoreText 0x90e1bd6f TTableStore::CopyTable(unsigned int, TCFRetained<__CFData const*>&) + 81
13 com.apple.CoreText 0x90e1bade TBaseFont::CopyTable(unsigned int) const + 72
14 com.apple.CoreText 0x90e1ba0f TcmapTable::TcmapTable(TBaseFont const&) + 31
15 com.apple.CoreText 0x90e1b8fd TBaseFont::GetGlyphsForCharacterRange(CFRange, unsigned short*) const + 27
16 com.apple.CoreText 0x90e1b79b TASCIIDataCache::TASCIIDataCache(TBaseFont const*) + 83
17 com.apple.CoreText 0x90e1b70f TBaseFont::CreateASCIIDataCache() const + 47
18 com.apple.CoreText 0x90e1b690 TFont::InitAdvanceCache() const + 42
19 com.apple.CoreText 0x90e1b4ad TASCIIEncoder::Encode() + 45
20 com.apple.CoreText 0x90e4433f TGlyphEncoder::EncodeChars(CFRange, TAttributes const&, TGlyphList<TDeletedGlyphIndex>&, TGlyphEncoder::Fallbacks) + 925
21 com.apple.CoreText 0x90e19ff6 TTypesetterAttrString::Initialize(__CFAttributedString const*) + 322
22 com.apple.CoreText 0x90e19b9d CTLineCreateWithAttributedString + 47
23 com.apple.HIToolbox 0x963d2b2d TCoreTextEngine::LayoutSingleLine(THIThemeTextInfo*, float) + 23
24 com.apple.HIToolbox 0x963d2a9a TCoreTextEngine::Layout(THIThemeTextInfo*, float, float, TextLayoutType) + 64
25 com.apple.HIToolbox 0x963ad2c9 TCoreTextEngine::VerifyLayout(THIThemeTextInfo*, float, float, LayoutIntent) + 309
26 com.apple.HIToolbox 0x96410b0a TCoreTextEngine::GetThemeTextDimensions(float, THIThemeTextInfo*, float*, float*, float*) + 54
27 com.apple.HIToolbox 0x9640fc51 DataEngine::GetTextDimensions(void const*, float, HIThemeTextInfo*, float*, float*, float*) + 283
28 com.apple.HIToolbox 0x963d1fc5 HIThemeGetTextDimensions + 187
29 com.apple.HIToolbox 0x963d1ca3 HIMenuBarView::MeasureMenuTitle(MenuData*, unsigned char, float*, int, unsigned char*) + 451
30 com.apple.HIToolbox 0x963d1a49 HIMenuBarView::MeasureAppMenus() + 261
31 com.apple.HIToolbox 0x963abb5d HIMenuBarView::EnsureBarLayout() + 489
32 com.apple.HIToolbox 0x963ab152 HIMenuBarView::DrawSelf(short, __HIShape const*, CGContext*) + 520
33 com.apple.HIToolbox 0x963aac22 HIView::DrawCacheOrSelf(short, __HIShape const*, CGContext*) + 86
34 com.apple.HIToolbox 0x963aaa42 HIView::SendDraw(short, OpaqueGrafPtr*, __HIShape const*, CGContext*) + 124
35 com.apple.HIToolbox 0x964395c7 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 755
36 com.apple.HIToolbox 0x964398b9 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 1509
37 com.apple.HIToolbox 0x9643a86b HIView::DrawComposited(short, OpaqueGrafPtr*, __HIShape const*, unsigned long, HIView*, CGContext*) + 1227
38 com.apple.HIToolbox 0x9643a9b3 HIView::Draw(short, OpaqueGrafPtr*, unsigned long) + 81
39 com.apple.HIToolbox 0x9643ad7b HIView::Render(unsigned long, CGContext*) + 45
40 com.apple.HIToolbox 0x963d084f WindowData::PrepareForVisibility() + 137
41 com.apple.HIToolbox 0x963cf893 _ShowHideWindows + 355
42 com.apple.HIToolbox 0x963cf728 ShowHide + 44
43 com.apple.HIToolbox 0x96399b09 _GetMenuBarWindow + 872
44 com.apple.HIToolbox 0x96399765 GetMenuBarView(MenuData*, unsigned char) + 74
45 com.apple.HIToolbox 0x963a2f3a MBarMenuRgn + 26
46 com.apple.HIToolbox 0x963a2d27 _ZL7ShowBar21MenuBarAnimationStylehhh + 281
47 com.apple.HIToolbox 0x963cd42a _ZL21UpdateAggregateUIMode21MenuBarAnimationStylehh + 772
48 com.apple.HIToolbox 0x963e38e5 ShowMenuBar + 163
49 com.apple.AppKit 0x001a9cad -[NSApplication finishLaunching] + 1331
50 com.apple.AppKit 0x001a9374 -[NSApplication run] + 142
51 com.apple.AppKit 0x0043d261 NSApplicationMain + 1054
52 com.riuz.ucalendarx 0x00001eea _start + 216
53 com.riuz.ucalendarx 0x00001e11 start + 4Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon -
ToC in CS4 crashes but not in CS3
Hi, i'm new to CS4 and i'm having a huge problem with a ToC in a book, everytime i try to update it, InDesign crashes, without prompting any error message, it just quits and disappears. I thought it had something to do with my document, though i couldn't put my finger on it. But this morning i tried with an older CS3 document, opened it in CS4 and it crashes too. It does not crash in CS3. Even more strange, i did another new document to build another ToC (in case it was my document that was corrupt or something) and it was working fine... but all of a sudden it stopped working and started crashing, i didn't make any changes, just reupdated it
Is there something that changed drastically in how InDesign handles the ToC? Maybe i'm doing something wrong since i kind of just figured it would work the same as in CS3.
Or maybe it's because we're still using MAC OS 10.4 ??
Any help would be wonderful!
Thanks in advance.humm maybe my message was confusing, it's the native CS4 file that is crashing, in my book (book panel) in CS4.
The test i did was to take a native CS3 document, opened it in CS4 and it started crashing too, while the same document would not crash in CS3.
Therefore my problem is with eitheir native and/or converted file in CS4...
though you make me think, i'm gonna try to export my book in INX just for fun and open it in CS3 see if still crashes... though it will not be a long term solution because we noticed that converted INX files tend to have textbox lenght issues...
edit : after the test above, i now confirm that my problem is with CS4, because when i export my CS4 document into a CS3 (inx) one, my ToC works fine
and we cannot use CS3 for that document, it needs to be in CS4... -
Hello I thought that I had ordered a photo book in aperture this morning but not sure that the order has gone through as I have not had a confirmation email,
t I am currently in canada and trying to get the book sent to Australia. Im not sure if apple is picking up my location and that is having any affect on it?
The AppleID you are using to buy the book, must be tied to the location of the store where you are ordering the book from. Is your AppleID associated with an australian address? And are you placing the order at the Australian store? The Canadian store will not shiptoAustralia, see these policies: http://www.apple.com/internetservices/terms/sales_policies.html
Also set the "Region" in the language & Text preferences to "Australia", while you are ordering.
Regards
Léonie -
Application crashes, but not in new user account. How to fix?
Like many others on the forum, I have experienced frequent crashes in SL in Mail, Safari, Powerpoint, and other applications, particularly when adding an attachment to an email message or inserting an image file in a presentation slide. Did all the usual maintenance things such as verifying and repairing permissions, reinstalling SL, trashing virus protection apps, etc. Crashes persisted. However, I created a new user account and when working in that account the crashes do not occur.
What does this suggest about the nature of the problem and how do I resolve it, preferably without migrating all my files over to the new user account.
Many thanks.Open Directory Utility. You will find it in Applications/Utilities.
Click the lock to make changes and enter your admin password.
Go to the menu bar: Edit > Enable root user.
Follow the instuctions to create the System Administrator (Root) user.
Do not use the same password that a regular user already has. Do not use a trivial password.
Log out the current user.
In the log in window, enter root as the user name.
Enter the password that you just created.
You now have access to all User accounts, folders and files. Move the files you need from the old account to the working one. For example move the contents of your old Documents folder to the new Documents folder. This is easiest if you open two Finder windows and place them side by side. repeat this for the other folders in your old user space with one exception. *Do not* copy the contents of the Library folder.
There are a couple of things in the Library folder that you probably do want. To retrieve your email, copy the contents of the Mail folder. If you have installed fonts in your user space copy those too.
Let your new Library manage itself from then on. Your apps will place preference files etc in the appropriate folders as they are launched.
You should also give the working account admin priviliges. (System Preferences > Accounts)
Be very careful whilst logged in as root. The main Library and System folders are no longer protected and nothing requires a further password entry. Do what you need to do and get out of there.
When you are finished log back in to the working account and open Directory Utility once more.
Go to Edit > Disable root user.
Keep the old user account on the drive for a while until you are sure everything is working correctly and nothing is missing. -
just wondering why you can browse, buy on itunes but not read on an imac. My kindle apps work on the imac, ipod, asus netbook, iphone and android devices. Why not ibooks on imac?
"just wondering why you can browse, buy on itunes but not read on an imac. "
Because Apple does not make an ibook reader for computers. -
[JS] Items on page vs pasteboard move differently in CS3 vs CS4/CS5
I'm trying to move all the items on all the pages in a document (including the master pages), regardless of what layer they are on and I want to retain their locked/unlocked states. In trying to figure this out I came across Adobe's AdjustLayout Sample script. This was quite helpful and I adapted it to move all the items a specified amount (the modified script is shown below). There may be a better way, but this was pretty much working.
Except one problem:
- In CS4 and later all items move, those on or off the page (in the pasteboard).
- In CS3 though, only the items on a page move, and NOT the ones on the pasteboard (which I do also want to move).
I have searched this forum and read a lot, but still haven't figured out how to get CS3 to also move the pasteboard items. Can anyone help? Below is the script I adapted, but I am open to other ways if there's something better. I used this because it seemed close to what I was looking for.
Thanks, in advance.
Dan
//Moves the content by specified amounts
//based on sample script by Adobe, but this moves objects by same amount regardless of even or odd pages
myDisplayDialog();
function myDisplayDialog(){
var myLabelWidth = 70;
var myDialog = app.dialogs.add({name:"Adjust Layout"});
with(myDialog.dialogColumns.add()){
with(borderPanels.add()){
with(dialogRows.add()){
with(dialogColumns.add()){
staticTexts.add({staticLabel:"Offset Amount:", minWidth:myLabelWidth});
staticTexts.add({staticLabel:"Horizontal:", minWidth:myLabelWidth});
staticTexts.add({staticLabel:"Vertical:", minWidth:myLabelWidth});
with(dialogColumns.add()){
staticTexts.add({staticLabel:""});
var myXField = measurementEditboxes.add({editValue:-12, editUnits:MeasurementUnits.points});
var myYField = measurementEditboxes.add({editValue:0, editUnits:MeasurementUnits.points});
var myResult = myDialog.show();
if(myResult == true){
var myX = myXField.editValue;
var myY = myYField.editValue;
myDialog.destroy();
myAdjustPages(myX, myY);
else{
myDialog.destroy();
function myAdjustPages(myX, myY){
var myPage;
//Set the transform content property to true so that content will move with frames.
//myOldTransformContent = app.transformPreferences.transformContent;
//app.transformPreferences.transformContent = true;
var usersXUnits = app.activeDocument.viewPreferences.horizontalMeasurementUnits;
var usersYUnits = app.activeDocument.viewPreferences.verticalMeasurementUnits;
//Set the measurement units to points.
app.activeDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;
app.activeDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;
//Save the old page numbering
var myOldPageNumbering = app.generalPreferences.pageNumbering;
app.generalPreferences.pageNumbering = PageNumberingOptions.section;
//Set page numbering to absolute
app.generalPreferences.pageNumbering = PageNumberingOptions.absolute;
for(var myCounter = 0; myCounter < app.activeDocument.pages.length; myCounter++){
myPage = app.activeDocument.pages.item(myCounter);
var myPageValue = myPage.documentOffset;
myAdjustPage(myPage, myX, myY);
for(var myMasterPageCounter = 0; myMasterPageCounter < app.activeDocument.masterSpreads.length; myMasterPageCounter++){
myMasterPage = app.activeDocument.masterSpreads[myMasterPageCounter].pages[0];
var myPageValue = myMasterPage.documentOffset;
myAdjustPage(myMasterPage, myX, myY);
} //Reset the transform content and measurement units to their original values.
app.activeDocument.viewPreferences.horizontalMeasurementUnits = usersXUnits;
app.activeDocument.viewPreferences.verticalMeasurementUnits = usersYUnits;
//app.transformPreferences.transformContent = myOldTransformContent;
app.generalPreferences.pageNumbering = myOldPageNumbering;
function myAdjustPage(myPage, myX, myY){
var myPageItem;
for(var myCounter = 0; myCounter < myPage.pageItems.length; myCounter ++){
var myResetItemLock = false;
var myResetLayerLock = false;
myPageItem = myPage.pageItems.item(myCounter);
if(myPageItem.locked == true){
myPageItem.locked = false;
myResetItemLock = true;
if(myPageItem.itemLayer.locked == true){
myPageItem.itemLayer.locked = false;
myResetLayerLock = true;
myPageItem.move(undefined, [myX, myY]);
if(myResetItemLock == true){
myPageItem.locked = true;
if(myResetLayerLock == true){
myPageItem.itemLayer.locked = true;No.
You'll need to loop through all pageItems and move them individually (checking if they're locked as you go...)
Harbs -
I was charged for a book that I tried to download to my new iPad, which I guess is the iPad 3. I downloaded the free sample first. Then I tried to buy the complete book, but it did not download. Only the free sample is there. How can I get the full book?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom -
Books in iBooks, but not syncable via itunes
I have 100s of PDFS and books currently in ibooks, however only less then half of the collection can be seen in itunes. Making it impossible to sync the books to my ipad!
Some are purchase from apple, some are not, however half of both collections are not present in itunes.
I have the lastest software for both mavericks and ibooks.
anyhelp on the matter would be greatiely appreciated,
thanks
mackiesmacThat seems to be the case now with iTunes 11, but in prior versions iTunes would automatically download all new books in iBooks, even ones not purchased in the iBookstore. That's why I developed the workflow I've been using. I'm just now running afoul of the changed behavior in the new version of iTunes.
Michael -
Premiere CC crash - period!
Before it crash on start-up it also crashed when I tried to render longer project. The message say "applications running out of memory". But CS6 is runing fine. Something wrong with the CC version of Premiere Pro? Does it need more memory then CS6?
Frustrating to say the least...Exactly what is inside the files?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/ -
920 settings menu, mail, camera crashes but not al...
My 920 is doing weird things since last weekend.
I installed some weather apps and the new foursquare app and ever since then when freshly booted after some time my 920 decides to do some strange things:
It takes like 5-10 seconds to display the unlock screen
Screen is very dim
Some apps will no longer start
Email
Settings
Camera
Internet Explorer
and probably a few others.
Strangely enough most other apps will work fine (angry birds, wordament, calculator, nokia music, xbox music etc.)
Also email, calls etc will still be comin in (albeit I cannot open the emails). Also switching between applications is VERY slow when this happens.
I have since removed above mentioned apps (to no avail), rebooted (which helps for a short period)
Also i've been in a reboot loop of some kind for like half an hour where it would only show the nokia logo, reboot, show logo and so on. This booted through eventiually.
I have tried:
Soft reset
Settings->about->factory defaults, with backup restored
Hard reset through buttons method, with backup restored
Hard reset through buttons method, clean (so no backup restored)
Flashed the phone with the most recent firmware
All this has not helped and I cannot find the source of the problem, I've eliminated nearly all thinkable options.
disabled wifi
flight mode
stopped my mail accounts from syncing
disabled mail from my live ID
removed facebook account
removed skype
Under all these conditions the problem has come up, wheter I am using the phone at that particular time or not.
I am at a loss as what this could be and am on the verge of sending the phone back.
Does this problem sound familiar to anyone? And if so, some pointers?
Solved!
Go to Solution.This issue is really strange, Yesterday I used the phone the whole day with a fresh boot in the morning and a single "crash" in the evening and today it has already "crashed" 4 times within 2 hours. And a short boot loop of about 10 minutes.
I also noticed that the rotation sensors are not working anymore when the phone gets in this state.
Oh and I mentioned that the calculator seemd to work, but this is wrong. It also crashes. -
in the itunes 10.5 preference and in the iOS 5 preferences (store) I can just select apps and books, no music and movies.... anybody knows why?
AlessandroFor anyone still wondering about this, reports today are that the UK won't see music in the cloud until Q1 2012 as negotiations have only just start with the Perfoamnce Rights Society. Slightly strange that licenses weren't done on a global level but it may be cash related. Apple apparently gave $150m to universal alone in advances
-
Excel file causes 2008 to crash but not 4.5
I have an excel file that is give or take 5MB which controls an excelsis dashboard, I have no issues with the spreadsheet on 4.5 but as soon as I load it into 2008 and try to create a .swf excelsius crashes (even with a blank model).
The file has quite a few vlookups and concatenate's with data in xs of 13,000 rows.
Can anyone give me any hints, does 2008 have more problems dealing with excel formula than 4.5 did?Gregory,
Here are a few thing to try:
1. Before opening Xcelsius have you ensured that there are no background istances of Excel running (use Ctrl +Alt + Delete) to view process running in background. If so, end the process.
2. If this does not work, try uninstalling, restarting you PC, and reinstalling X2008 again. This is probably the desired route if you can't even get a blank model to open. We had to do this as well.
Hope this helps!
Xcelsius Gurus
http://www.everythingxcelsius.com
"Xcelsius Gurus share tips, reviews, tricks and much more!" -
IPad 4 w iBooks syncs Books via iCloud but not pdf's on my iMac iBooks
Why dont the Pdf's come over from iBooks on the iMac to the iPad4?
They won't go via iCloud, only ibooks that you buy/download from iTunes will potentially show (whilst they remain in the store) in the iBooks app on your iPad for redownloading - if you want the PDFs in the iBooks app on your iPad then you will need to connect the iPad to your Mac and select it in iTunes, and use its Books tab to select and sync them to it.
-
Illustrator CS4 lags on Intel Mac but not PowerPC
From what I can tell the lag only occurs when selecting an object in a project. Once I select any object there is about a 5 second delay where the beachball will spin until finally the object is selected. Also, about 50% of the time the selected object will jump across the screen after it is selected. It happens in any file, new or old, and with any size file from very complex to new documents with just one line in it. There are zero problems on my old PowerPC G5 tower but any time I use Illustrator on either my old MacBook with a Core 2 Duo 2.2 Ghz or my brand new MacBook Pro i7 2.3 Ghz it happens. I have found that using a selection box eleminates the problem but the fact remains there is a problem that needs to be resolved. It makes Illustrator almost unusable - any help would be VERY appreciated.
Thanks for the time.So I ended up formatting the hard drive and reinstalling OS X and all CS 4. This fixed the lag problems I had for about a week, then suddenly today I created a new document, threw a few lines in and BAM! The same thing started happening again - every file, new or old is lagging again. SOMEBODY PLEASE HELP!
EDIT: Here's a video of what is happening. Note, after selecting the line you can see the blue endpoints of the line but it takes several seconds for the selection box to appear around the line. The beachball is also not showing up in the screencast.
Maybe you are looking for
-
WebI Report is taking too long time to opening
Hi All, When iam trying to open the WebI report in Infoview , it is taking long time to open and refresh, Please suggest me a solution. Thanks in advance.. Regards, Mahesh
-
Hi, i need Visual C/C++ code/Labview code for interfacing NI Hardware and sample project example.
-
Incorrect Return PO Quantity in Advance Returns Management
Hi, Issue Description - Return Sales order is created to process returns for multiple materials. In Returns sales order, Return Reason, Follow up Action(Ship to Vendor) and Refund controls are keyed in. Note that Advance Returns Management is activat
-
Hosting Projects on a different server?
Hi, I am using a custom LMS with captivate projects. This works fine, but some customers from other countries report, that the communication to the LMS is very slow. So it takes very long until the captivate course is fully loaded. So my question, is
-
The Mail dock icon always shows there are 7 unread messages in my inbox, when there are none. When there are some, their number is added to 7. This developed after I migrated the contents of my drive to my new computer. How can I get rid of the omnip