CS3 Tools Problem

Hi,
I have Photoshop CS3 and I am unable to use the tools (brushes, lasso tool, gradient, etc...).
I have tried restarting and the usual but whenever I select a tool CS3 seems to not do anything in response - the cursor remains as the white hand.
Everything else seems to be working apart from the tool palette.
What could be the problem here?

Try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Similar Messages

Adobe Publicly Claims Leopard is the Reason for PS CS3 Crop Tool Problems

From the Adobe User to User Forum for Mac PS:
"Adobe and Apple are working closely to provide a fix to a known issue running Adobe Photoshop CS3 and Photoshop CS3 Extended on Mac OS X Leopard (v10.5.1). Currently, when you enter values in numerical fields to set sizes for the brush, crop, marquee, lasso, type, and other Photoshop CS3 tools, those values revert to previously entered values when you try to apply them.
While we have identified workarounds for some of the affected tools, this issue prevents people from working as precisely and intuitively as they expect. Providing a fix to customers is a top priority. Please note the following:
The fix will be provided through an update to Mac OS X Leopard. Consequently, it is not part of the Photoshop CS3 (10.0.1) update.
Apple is collaborating closely with us to get this fix incorporated into a Mac OS X Leopard update. *No public schedule* is available at this time, but both companies understand the urgency of this fix."
This is a huge major problem and would hope that Apple, if indeed it is their problem, will assign all the resources necessary to get a fix far before 08 arrives.
Message was edited by: Pixelhead

David DeCristoforo wrote:
Adobe should have had updates waiting on the day 10.5 was released. Not possible? BS! Even a dippy little driver like SteerMouse had a 10.5 version posted to download the day after 10.5 was released.
You are conveniently omitted the various developers, much smaller than Adobe, who did not ship updates the day Leopard was available, claiming that they really needed to test with the final shipping version. I might try to dig up a few of those notices.
Believe it or not, Adobe actually beat several small developers to Universal Binary, even though it took a while for Adobe's huge code bases.
And if it's a Leopard bug, then I want Apple to fix it, rather than forcing the developer to work around it if there's a fix coming anyway. That would be a waste of time.
Also I severely doubt that Adobe had the, as you say, "source code" for Leopard. Does Apple let any other developer have the "source code?" I think the only source code allowed outside the Apple campus are the parts that were already open source to begin with.

CS3 tools interactive photo album and small video

Sorry to ask something that I should know.
I have 2 the CS3 tools, photoshop & AI and the full production studio of CS2. I haven't used these tools for mnths (nearing a yr) and didn't have a whole lot of experience even when I used them daily.
Cutting to the chase... I want to create a short video and an interactive photo album to go on a settop playable CD-rom.
I don't need help with the video part. But am at something of a loss about the interactive photo album. I've done quite a few animated photo-albums but the only interactive part was with DVD menus.
I'm not really talking about a lot of interactivity. I plan to put the pictures in pages and would like the user to be able to turn the pages.
That is, I'd like the pages static but turnable by user/viewer.
Maybe menus would be one way to do it, but wondering if there is some way to make it a little less clunky. Ahh .. maybe all I'm describing is chapters.. but even then I'm not sure how to do that on a CD-rom as opposed to a dvd...... still any input would be welcome.

I have a similar problem. I have DreamWeaver8 and installed a
demo version of Fireworks. Fireworks works fine when I just want to
open an image to edit.
However when I try to create a Photo Album I am prompted to
install Fireworks. I have 21 days left in the trial version.
thank you
Paul Picard

Laptop mode tools problem with kernel 3.0

today I just updated the system and my laptop runs dramatically hotter after that. I read the archwiki, it does talk about the laptop mode tools problem with kernel 3.0 but when I opened the file /usr/sbin/laptop_mode, the lines which the wiki mentions are not there. Does anyone here have the same problem and can you offer the solution?
Here is my /usr/sbin/laptop_mode
#! /bin/sh
# Script to start or stop laptop_mode, and to control various settings of the
# kernel, hardware etc. that influence power consumption.
# This script is a part of Laptop Mode Tools. If you are running a supported
# power management daemon, this script will be automatically called on power
# state change.
# Configure laptop mode tools in /etc/laptop-mode/laptop-mode.conf, and in
# the broken-out config files in /etc/laptop-mode/conf.d.
# Please consult the manual pages laptop-mode.conf(8) and laptop_mode(8) for
# additional information.
# Maintainer: Ritesh Raj Sarraf ([email protected])
# Original Author: Bart Samwel ([email protected])
# Project home page: http://samwel.tk/laptop_mode
# Contributors to this script: Bart Samwel
# Kiko Piris
# Micha Feigin
# Andrew Morton
# Herve Eychenne
# Dax Kelson
# Jan Polacek
# ... and many others that I've stopped
# keeping track of.
# Based on a script for Linux 2.4 written by Jens Axboe.
set -a
# The laptop mode tools version number. Extracted by the installer makefile
# as well, so don't change the format!
LMTVERSION=1.59
# This script is loaded from multiple scripts to set the config defaults
# and to read the configuration on top of those. Only when the command is
# recognized does this script do anything else.
VERBOSE_OUTPUT=0
ENABLE_LAPTOP_MODE_ON_BATTERY=1
ENABLE_LAPTOP_MODE_ON_AC=0
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
PARTITIONS="auto /dev/mapper/*"
LM_BATT_MAX_LOST_WORK_SECONDS=600
LM_AC_MAX_LOST_WORK_SECONDS=360
DEF_MAX_AGE=30
LM_READAHEAD=3072
NOLM_READAHEAD=128
CONTROL_READAHEAD=1
CONTROL_NOATIME=0
USE_RELATIME=1
CONTROL_HD_IDLE_TIMEOUT=1
LM_AC_HD_IDLE_TIMEOUT=4 # 20 seconds
LM_BATT_HD_IDLE_TIMEOUT=4 # 20 seconds
NOLM_HD_IDLE_TIMEOUT=244 # 2 hours
DEF_UPDATE=5
DEF_XFS_AGE_BUFFER=15
DEF_XFS_SYNC_INTERVAL=30
DEF_XFS_BUFD_INTERVAL=1
XFS_HZ=100
CONTROL_MOUNT_OPTIONS=1
BATT_HD_POWERMGMT=1
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
CONTROL_HD_POWERMGMT=0
CONTROL_HD_WRITECACHE=0
NOLM_AC_HD_WRITECACHE=1
NOLM_BATT_HD_WRITECACHE=0
LM_HD_WRITECACHE=0
LM_DIRTY_RATIO=60
LM_DIRTY_BACKGROUND_RATIO=1
NOLM_DIRTY_BACKGROUND_RATIO=10
NOLM_DIRTY_RATIO=40
LM_SECONDS_BEFORE_SYNC=2
BATT_CPU_MAXFREQ=medium
BATT_CPU_MINFREQ=slowest
BATT_CPU_GOVERNOR=ondemand
BATT_CPU_IGNORE_NICE_LOAD=1
LM_AC_CPU_MAXFREQ=fastest
LM_AC_CPU_MINFREQ=slowest
LM_AC_CPU_GOVERNOR=ondemand
LM_AC_CPU_IGNORE_NICE_LOAD=1
NOLM_AC_CPU_MAXFREQ=fastest
NOLM_AC_CPU_MINFREQ=slowest
NOLM_AC_CPU_GOVERNOR=ondemand
NOLM_AC_CPU_IGNORE_NICE_LOAD=0
CONTROL_CPU_FREQUENCY=0
HD="/dev/[hs]d[abcdefgh]"
CONTROL_SYSLOG_CONF=0
LM_AC_SYSLOG_CONF=/etc/syslog-on-ac-with-lm.conf
NOLM_AC_SYSLOG_CONF=/etc/syslog-on-ac-without-lm.conf
BATT_SYSLOG_CONF=/etc/syslog-on-battery.conf
SYSLOG_CONF_SIGNAL_PROGRAM=syslogd
SYSLOG_CONF=/etc/syslog.conf
CONTROL_DPMS_STANDBY=0
BATT_DPMS_STANDBY=300
LM_AC_DPMS_STANDBY=1200
NOLM_AC_DPMS_STANDBY=1200
CONTROL_CPU_THROTTLING=0
BATT_CPU_THROTTLING=medium
LM_AC_CPU_THROTTLING=minimum
NOLM_AC_CPU_THROTTLING=minimum
CONTROL_START_STOP=1
CONTROL_TERMINAL=0
TERMINALS="/dev/vc/1 /dev/vcs1"
BATT_TERMINAL_BLANK_MINUTES=1
BATT_TERMINAL_POWERDOWN_MINUTES=2
LM_AC_TERMINAL_BLANK_MINUTES=10
LM_AC_TERMINAL_POWERDOWN_MINUTES=10
NOLM_AC_TERMINAL_BLANK_MINUTES=10
NOLM_AC_TERMINAL_POWERDOWN_MINUTES=50
ENABLE_AUTO_HIBERNATION=0
HIBERNATE_COMMAND=/usr/sbin/hibernate
AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
AUTO_HIBERNATION_BATTERY_CHARGE_MAH=0
AUTO_HIBERNATION_BATTERY_CHARGE_MWH=0
MINIMUM_BATTERY_CHARGE_MAH=0
MINIMUM_BATTERY_CHARGE_MWH=0
ASSUME_SCSI_IS_SATA=1
CONTROL_BRIGHTNESS=0
BATT_BRIGHTNESS_COMMAND=false
LM_AC_BRIGHTNESS_COMMAND=false
NOLM_AC_BRIGHTNESS_COMMAND=false
LOG_TO_SYSLOG=1
DEBUG=0
ENABLE_LAPTOP_MODE_TOOLS=1
# Initialize the PATH Variable
export PATH="${PATH}":/bin:/sbin:/usr/bin:/usr/sbin
# This is a 2 phase locking approach. LMT_REQ_LOCK is the outer lock and LMT_INVOC_LOCK is the inner lock
# We take this approach to ensure the scenario that, "At any point when an event occurs (AC/BATT), the
# kernel can generate multiple events spanning over a couple of events. The first event is honored and
# lmt executes. If the last event triggered at the 9th second, there is a fair chance that a good amount
# of state change would have occured in the OS, to honor that state, we keep an outer lock (LMT_REQ_LOCK)
# handy, so that those changes can also be applied and not forgotten.
# Workflow:
# Event-1 is generated and lmt executes (lmt runtime could span 5-10 seconds)
# At seventh second, 4 events generate. But Event-1 is still running.
# We don't want to discard all the remaining 4 events, but at least honor 1 so that we can act to the changes
# that occured in the last 7 seconds.
# So, Event-2 acquire LMT_REQ_LOCK and waits to acquire LMT_INVOC_LOCK (which is acquire by Event-1)
LMT_REQ_LOCK="/var/lock/lmt-req.lock"
LMT_INVOC_LOCK="/var/lock/lmt-invoc.lock"
FLOCK=`which flock`
checkint ()
# $1 arg should be the string/integer
# that you want to check for as an integer.
echo $1 | grep "[^0-9]" > /dev/null 2>&1
return $?;
# Returns 1 if it is an integer
# Function to handle logging
LOGGER=`which logger`;
log ()
# $1 should be msg type
# $2 should be the real msg
if [ x$LOG_TO_SYSLOG = x1 ]; then
# NOTE: Add the check on $2 being empty, once you are confident
# that there aren't any bugs in logging. And no bugs in executing
# modules and logging
if [ -x $LOGGER -a "$1" != "STATUS" ]; then
#if [ -z $2 ]; then
# continue
#elif [ "$1" = "MSG" ]; then
if [ "$1" = "MSG" ]; then
logger -p daemon.info -t laptop-mode "$2";
elif [ "$1" = "ERR" ]; then
logger -p daemon.err -t laptop-mode "$2";
elif [ "$1" = "VERBOSE" ]; then
if [ x$VERBOSE_OUTPUT = x1 ]; then
logger -p daemon.debug -t laptop-mode "$2";
fi
else
logger -p daemon.notice -t laptop-mode "$2";
fi
fi
fi
if [ "$1" = "VERBOSE" ]; then
$LM_VERBOSE && echo "$2" >/dev/fd/2;
elif [ "$1" = "ERR" ]; then
echo "$2" >/dev/fd/2;
else
# Message of type MSG and STATUS can go to stdout.
echo "$2" >/dev/fd/1;
fi
enableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set -vx
fi
disableDebug ()
# Check if debug is enabled
if [ x$(($(basename $1 | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG)) = x1 ]; then
set +vx
fi
# No default on these ones -- we need to detect if they have been set, for
# backward compatibility with MINIMUM_BATTERY_MINUTES etc.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=
MINIMUM_BATTERY_CHARGE_PERCENT=
# Backward compatibility variable that is sometimes
# set externally (Debian init system)
unset VERBOSE
lmt_load_config ()
# Source config. Some config settings have been moved from the main config file
# to modular configuration files, and to support existing laptop-mode.conf
# files from earlier versions, we source the modular configuration files FIRST.
if [ -d /etc/laptop-mode/conf.d ] ; then
for CONF in /etc/laptop-mode/conf.d/*.conf ; do
if [ -r "$CONF" ] ; then
. "$CONF"
#Handle individual module debug settings
if [ "$DEBUG" -eq 1 ]; then
export $(basename $CONF | cut -d . -f1 | tr "[:lower:]" "[:upper:]" | sed 's/-/_/g')_DEBUG=1
log "VERBOSE" "Enabling debug mode for module $CONF"
fi
DEBUG=0
else
log "MSG" "Warning: Configuration file $CONF is not readable, skipping."
fi
done
fi
if [ -r /etc/laptop-mode/laptop-mode.conf ] ; then
. /etc/laptop-mode/laptop-mode.conf
else
log "ERR" "$0: Configuration file /etc/laptop-mode/laptop-mode.conf not present or not readable."
exit 1
fi
if [ x$ENABLE_LAPTOP_MODE_TOOLS = x0 ]; then
log "MSG" "laptop-mode-tools is disabled in config file. Exiting"
exit 0;
fi
# Add a simple bash debug mode switch
if [ "$DEBUG" -eq 1 ]; then
set -vx;
fi
# Support for old config settings
if [ "$AC_HD" != "" ] ; then
AC_HD_WITHOUT_LM="$AC_HD"
AC_HD_WITH_LM="$AC_HD"
fi
if [ "$VERBOSE" != "" ] ; then
VERBOSE_OUTPUT="$VERBOSE"
fi
if [ "$CPU_MAXFREQ" != "" ] ; then
BATT_CPU_MAXFREQ="$CPU_MAXFREQ"
fi
if [ "$MAX_AGE" != "" ] ; then
LM_BATT_MAX_LOST_WORK_SECONDS="$MAX_AGE"
LM_AC_MAX_LOST_WORK_SECONDS="$MAX_AGE"
fi
if [ "$DEF_AGE" != "" ] ; then
DEF_MAX_AGE="$DEF_AGE"
fi
if [ "$LAPTOP_MODE_ALWAYS_ON" != "" ] ; then
ENABLE_LAPTOP_MODE_ALWAYS="$LAPTOP_MODE_ALWAYS_ON"
fi
if [ "$LM_WHEN_LID_CLOSED" != "" ] ; then
ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED="$LM_WHEN_LID_CLOSED"
fi
if [ "$REMOUNT_PARTITIONS" != "" ] ; then
PARTITIONS="$REMOUNT_PARTITIONS"
fi
if [ "$READAHEAD" != "" ] ; then
LM_READAHEAD="$READAHEAD"
fi
if [ "$DO_REMOUNT_NOATIME" != "" ] ; then
CONTROL_NOATIME="$DO_REMOUNT_NOATIME"
fi
if [ "$DO_HD" != "" ] ; then
CONTROL_HD_IDLE_TIMEOUT="$DO_HD"
fi
if [ "$AC_HD_WITH_LM" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT="$AC_HD_WITH_LM"
fi
if [ "$AC_HD_WITHOUT_LM" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT="$AC_HD_WITHOUT_LM"
fi
if [ "$BATT_HD" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT="$BATT_HD"
fi
if [ "$DO_REMOUNTS" != "" ] ; then
CONTROL_MOUNT_OPTIONS="$DO_REMOUNTS"
fi
if [ "$DO_HD_POWERMGMT" != "" ] ; then
CONTROL_HD_POWERMGMT="$DO_HD_POWERMGMT"
fi
if [ "$AC_HDPARM_POWERMGMT_WITH_LM" != "" ] ; then
LM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITH_LM"
fi
if [ "$AC_HDPARM_POWERMGMT_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_POWERMGMT="$AC_HDPARM_POWERMGMT_WITHOUT_LM"
fi
if [ "$BATT_HDPARM_POWERMGMT" != "" ] ; then
BATT_HD_POWERMGMT="$BATT_HDPARM_POWERMGMT"
fi
if [ "$DO_WRITECACHE" != "" ] ; then
CONTROL_HD_WRITECACHE="$DO_WRITECACHE"
fi
if [ "$AC_WRITECACHE_WITHOUT_LM" != "" ] ; then
NOLM_AC_HD_WRITECACHE="$AC_WRITECACHE_WITHOUT_LM"
fi
if [ "$BATT_WRITECACHE" != "" ] ; then
LM_HD_WRITECACHE="$BATT_WRITECACHE"
fi
if [ "$DIRTY_RATIO" != "" ]; then
LM_DIRTY_RATIO="$DIRTY_RATIO"
fi
if [ "$DIRTY_BACKGROUND_RATIO" != "" ] ; then
LM_DIRTY_BACKGROUND_RATIO="$DIRTY_BACKGROUND_RATIO"
fi
if [ "$DEF_DIRTY_RATIO" != "" ]; then
NOLM_DIRTY_RATIO="$DEF_DIRTY_RATIO"
fi
if [ "$DEF_DIRTY_BACKGROUND_RATIO" != "" ] ; then
NOLM_DIRTY_BACKGROUND_RATIO="$DEF_DIRTY_BACKGROUND_RATIO"
fi
if [ "$DO_CPU" != "" ] ; then
CONTROL_CPU_FREQUENCY="$DO_CPU"
fi
if [ "$CONTROL_CPU_MAXFREQ" != "" ] ; then
CONTROL_CPU_FREQUENCY="$CONTROL_CPU_MAXFREQ"
fi
if [ "$AC_CPU_MAXFREQ_WITH_LM" != "" ] ; then
LM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITH_LM"
fi
if [ "$AC_CPU_MAXFREQ_WITHOUT_LM" != "" ] ; then
NOLM_AC_CPU_MAXFREQ="$AC_CPU_MAXFREQ_WITHOUT_LM"
fi
if [ "$DO_SYSLOG" != "" ] ; then
CONTROL_SYSLOG_CONF="$DO_SYSLOG"
fi
if [ "$SYSLOG_SIGNAL_PROGRAM" != "" ] ;then
SYSLOG_CONF_SIGNAL_PROGRAM="$SYSLOG_SIGNAL_PROGRAM"
fi
if [ "$AC_SYSLOG_WITH_LM" != "" ] ; then
LM_AC_SYSLOG_CONF="$AC_SYSLOG_WITH_LM"
fi
if [ "$AC_SYSLOG_WITHOUT_LM" != "" ] ; then
NOLM_AC_SYSLOG_CONF="$AC_SYSLOG_WITHOUT_LM"
fi
if [ "$BATT_SYSLOG" != "" ] ; then
BATT_SYSLOG_CONF="$BATT_SYSLOG"
fi
if [ "$ENABLE_LAPTOP_MODE_ALWAYS" != "" ] ; then
ENABLE_LAPTOP_MODE_ON_AC="$ENABLE_LAPTOP_MODE_ALWAYS"
fi
if [ "$MINIMUM_BATTERY_MINUTES" != "" -a "$MINIMUM_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
MINIMUM_BATTERY_CHARGE_PERCENT="$MINIMUM_BATTERY_MINUTES"
fi
if [ -z "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
MINIMUM_BATTERY_CHARGE_PERCENT=3
fi
if [ "$AUTO_HIBERNATION_BATTERY_MINUTES" != "" -a "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" = "" ] ; then
# Use a very conservative estimate (1% = 1 battery minute, 100 minutes in a battery)
# for backward compatibility.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT="$AUTO_HIBERNATION_BATTERY_MINUTES"
fi
if [ -z "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
# Apply the default, now that we've determined that this is the minimum.
AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=2
fi
# Postprocessing
if [ "$VERBOSE_OUTPUT" -ne 0 ] ; then
OUTPUT="/dev/stdout"
LM_VERBOSE="[ 1 = 1 ]"
else
OUTPUT="/dev/null"
LM_VERBOSE="[ 1 = 0 ]"
fi
if [ "$PARTITIONS" = "" ] ; then
PARTITIONS="auto /dev/mapper/*"
fi
# Expand shell wild cards immediately.
PARTITIONS=$( echo $PARTITIONS )
TERMINALS=$( echo $TERMINALS )
# Convert seconds to hdparm -S format
# Everything over 20 minutes is interpreted as 2 hours.
seconds_to_hdparm_S() {
if [ "$1" -eq 0 ] ; then
# disable.
echo 0
elif [ "$1" -gt 0 -a "$1" -lt 5 ] ; then
# 5 seconds minimum
echo 1
elif [ "$1" -le $((240*5)) ] ; then
# Values between 1 and 240 signify increments of 5 seconds
echo $(($1 / 5))
elif [ "$1" -lt $((30*60)) ] ; then
# Values between 20 and 30 minutes are rounded up to 30 minutes.
echo 241
elif [ "$1" -lt $((12*30*60)) ] ; then
# Values between 30 minutes and 6 hours (exclusive) yield values between
# 241 and 251, in 30-minute increments.
echo $(( 240 + ($1 / (30*60)) ))
else
# Larger values effectively indicate no timeout at all.
echo 0
fi
# Convert configured idle timeouts to hdparm -S format.
if [ "$LM_AC_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_AC_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_AC_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$LM_BATT_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
LM_BATT_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $LM_BATT_HD_IDLE_TIMEOUT_SECONDS)
fi
if [ "$NOLM_HD_IDLE_TIMEOUT_SECONDS" != "" ] ; then
NOLM_HD_IDLE_TIMEOUT=$(seconds_to_hdparm_S $NOLM_HD_IDLE_TIMEOUT_SECONDS)
fi
# The main workhorse.
lmt_main_function ()
if [ "$1" = "status" ] ; then
# Display a status report.
log "STATUS" "Mounts:"
mount | sed "s/^/ /"
log "STATUS" " "
log "STATUS" "Drive power status:"
for disk in $HD; do
if [ -r $disk ]; then
hdparm -C $disk 2>/dev/null | sed "s/^/ /"
else
log "STATUS" " Cannot read $disk, permission denied - $0 needs to be run as root"
fi
done
log "STATUS" " "
log "STATUS" "(NOTE: drive settings affected by Laptop Mode cannot be retrieved.)"
log "STATUS" " "
log "STATUS" "Readahead states:"
cat /etc/mtab | while read DEV MP FST OPTS DUMP PASS ; do
# skip funny stuff
case "$FST" in
rootfs|unionfs|tmpfs|squashfs|sysfs|usbfs|proc|devpts) continue
esac
if [ -b $DEV ] ; then
if [ -r $DEV ] ; then
log "STATUS" " $DEV: $((`blockdev --getra $DEV` / 2)) kB"
else
log "STATUS" " Cannot read $DEV, permission denied - $0 needs to be run as root"
fi
fi
done
log "STATUS" " "
if [ -e /var/run/laptop-mode-tools/enabled ] ; then
log "STATUS" "Laptop Mode Tools is allowed to run: /var/run/laptop-mode-tools/enabled exists."
else
log "STATUS" "Laptop Mode Tools is NOT allowed to run: /var/run/laptop-mode-tools/enabled does not exist."
fi
log "STATUS" " "
STATFILES="/proc/sys/vm/laptop_mode /proc/apm /proc/pmu/info /proc/sys/vm/bdflush /proc/sys/vm/dirty_ratio /proc/sys/fs/xfs/age_buffer /proc/sys/fs/xfs/sync_interval /proc/sys/fs/xfs/lm_age_buffer /proc/sys/fs/xfs/lm_sync_interval /proc/sys/vm/pagebuf/lm_flush_age /proc/sys/fs/xfs/xfsbufd_centisecs /proc/sys/fs/xfs/xfssyncd_centisecs /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_expire_centisecs /proc/sys/fs/xfs/age_buffer/centisecs /proc/sys/vm/dirty_writeback_centisecs /sys/devices/system/cpu/*/cpufreq/cpuinfo_*_freq /sys/devices/system/cpu/*/cpufreq/scaling_governor /proc/acpi/button/lid/*/state /proc/acpi/ac_adapter/*/state /proc/acpi/battery/*/state /sys/class/power_supply/*/online /sys/class/power_supply/*/state"
for THISFILE in $STATFILES ; do
if [ -e "$THISFILE" ] ; then
log "STATUS" "$THISFILE:"
if [ -r "$THISFILE" ] ; then
cat "$THISFILE" | sed "s/^/ /"
else
log "STATUS" " Not accessible, permission denied - $0 needs to be run as root."
fi
log "STATUS" " "
fi
done
elif [ "$1" != "readconfig" -a "$1" != "defaults" ] ; then
KLEVEL="$(uname -r |
IFS='.-' read a b c
echo $a.$b
KMINOR="$(uname -r |
IFS='.-' read a b c d
# Strip any stuff from the end -- only the initial digits are part of the KMINOR.
echo $c | sed -e 's/$[[:digit:]]*$.*/\1/'
# Stop exporting everything -- what we do from here is private.
set +a
if [ "$1" = "--version" ] ; then
log "MSG" "Laptop Mode Tools $LMTVERSION"
exit 0
fi
if [ ! -e /proc/sys/vm/laptop_mode ] ; then
log "ERR" "Kernel does not have support for laptop mode. Please apply the laptop mode"
log "ERR" "patch or install a newer kernel."
exit 1
fi
if [ ! -w /proc/sys/vm/laptop_mode ] ; then
log "ERR" "You do not have enough privileges to enable laptop_mode."
exit 1
fi
INIT=0 # Display info in init script format?
FORCE=0 # Force reapplying the current state?
while [ "$1" != "" ] ; do
case "$1" in
init) INIT=1 ;;
force) FORCE=1 ;;
# Old options. We always do "auto" for any option now, but
# we still have to accept the options.
start) ;;
stop) ;;
auto) ;;
modules=*)
MODULES=$1
MODULES=${MODULES#"modules="}
devices=*)
DEVICES=$1
DEVICES=${DEVICES#"devices="}
*) log "ERR" "Unrecognized option $1."
exit 1 ;;
esac
shift
done
mkdir -p /var/run/laptop-mode-tools
# Used to display laptop mode state later on. This is the enabled/disabled
# state for laptop mode processing, it tells us nothing about whether laptop
# mode is actually _active_.
STATE=enabled
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -eq 0 -a "$ENABLE_LAPTOP_MODE_ON_AC" -eq 0 -a "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -eq 0 ] ; then
STATE=disabled
fi
# Determine the power state.
# First try /sys/class/power_supply/*
FOUND_SYS_CLASS_POWER_SUPPLY_AC=0
ON_AC=0
for POWER_SUPPLY in /sys/class/power_supply/* ; do
if [ -f $POWER_SUPPLY/type ] ; then
if [ "$(cat $POWER_SUPPLY/type)" = "Mains" ] ;then
log "VERBOSE" "Determining power state from $POWER_SUPPLY/online."
FOUND_SYS_CLASS_POWER_SUPPLY_AC=1
if [ "$(cat $POWER_SUPPLY/online)" = 1 ] ; then
ON_AC=1
fi
fi
fi
done
if [ $FOUND_SYS_CLASS_POWER_SUPPLY_AC = 1 ] ; then
# Already found it!
log "VERBOSE" "Not trying other options, already found a power supply."
elif [ -d /proc/acpi/ac_adapter ] ; then
log "VERBOSE" "Determining power state from /proc/acpi/ac_adapter."
ADAPTERS_FOUND=0
ON_AC=0
for ADAPTER in /proc/acpi/ac_adapter/* ; do
if [ -f $ADAPTER/state ] ; then
ADAPTERS_FOUND=1
STATUS=`awk '/^state: / { print $2 }' $ADAPTER/state`
if [ "$STATUS" = "on-line" ] ; then
ON_AC=1
fi
fi
done
if [ "$ADAPTERS_FOUND" -eq 0 ] ; then
ON_AC=1
fi
elif [ -f /proc/pmu/info ] ; then
log "VERBOSE" "Determining power state from /proc/pmu/info."
if ( grep -q "^AC Power.*0$" /proc/pmu/info ) ; then
log "VERBOSE" "/proc/pmu/info indicates absence of AC power."
ON_AC=0
else
# It is possible that there is no AC Power = 1 in the file,
# but we always assume AC power when we're not sure.
ON_AC=1
log "VERBOSE" "/proc/pmu/info indicates presence of AC power."
fi
elif [ -f /proc/apm ] ; then
log "VERBOSE" "Determining power state from /proc/apm."
read D1 D2 D3 APM_AC_STATE D0 </proc/apm
if [ "$APM_AC_STATE" = "0x00" ] ; then
ON_AC=0
else
ON_AC=1
fi
else
log "VERBOSE" "No /sys/class/power_supply, ACPI, APM or PMU power management information found -- assuming AC power is present."
ON_AC=1
fi
# Determine whether to activate or deactivate laptop mode.
ACTIVATE=0
if [ "$ON_AC" -eq 1 ] ; then
if [ "$ENABLE_LAPTOP_MODE_ON_AC" -ne 0 ] ; then
log "VERBOSE" "On AC power: Activating, because ENABLE_LAPTOP_MODE_ON_AC is set."
ACTIVATE=1
else
log "VERBOSE" "On AC power: Deactivating, because ENABLE_LAPTOP_MODE_ON_AC is not set."
ACTIVATE=0
fi
else
if [ "$ENABLE_LAPTOP_MODE_ON_BATTERY" -ne 0 ] ; then
log "VERBOSE" "On battery power: Activating, because ENABLE_LAPTOP_MODE_ON_BATTERY is set."
ACTIVATE=1
else
log "VERBOSE" "On battery power: Deactivating, because ENABLE_LAPTOP_MODE_ON_BATTERY is not set."
ACTIVATE=0
fi
fi
if [ "$ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED" -ne 0 -a "$ACTIVATE" -eq 0 ] ; then
if [ -x "`which hal-find-by-property`" ] ; then
HAL_LID_BUTTON=$(hal-find-by-property --key "button.type" --string "lid")
fi
if [ "$HAL_LID_BUTTON" != "" ] ; then
HAL_LID_BUTTON_STATE=$(hal-get-property --udi $(hal-find-by-property --key "button.type" --string "lid") --key "button.state.value")
if [ "$HAL_LID_BUTTON_STATE" = "true" ] ; then
log "VERBOSE" "Setting action to \"start\" because the lid is closed (says HAL)."
ACTIVATE=1
fi
elif [ -f /proc/acpi/button/lid/*/state ] ; then
if ( grep -q "closed" /proc/acpi/button/lid/*/state ) ; then
log "VERBOSE" 'Setting action to "start" because the lid is closed (says /proc/acpi/button/lid/*/state).'
ACTIVATE=1
fi
else
log "MSG" "Warning: ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED is set, but there is no file"
log "MSG" "/proc/acpi/button/lid/.../state, and hal information is not available either!"
fi
fi
# If the init script has not been run or has been run with the "stop"
# argument, then we should never start laptop mode.
if [ ! -f /var/run/laptop-mode-tools/enabled ] ; then
log "VERBOSE" "Laptop mode disabled because /var/run/laptop-mode-tools/enabled is missing."
STATE=disabled
fi
if [ "$ACTIVATE" -eq 1 -a -f /etc/default/laptop-mode ] ; then
. /etc/default/laptop-mode
if ! ( echo "$ENABLE_LAPTOP_MODE" |grep y ) ; then
log "VERBOSE" "Not starting laptop mode because it is disabled in /etc/default/laptop-mode."
STATE=disabled
fi
fi
if [ "$STATE" = "disabled" ] ; then
ACTIVATE=0
fi
# Check whether we are allowed to activate the data-loss-sensitive stuff.
# If the battery charge is too low, we want to disable this, but not the
# other power-saving stuff.
if [ "$ACTIVATE" -eq 0 ] ; then
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
elif [ "$ON_AC" = 1 ] ; then
log "VERBOSE" "On AC, not checking minimum battery charge."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
else
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=1
ENOUGH_CHARGE=0
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=0
# Weird way of checking that /sys/class/power_supply is not empty -- but it works.
if [ "$(echo /sys/class/power_supply/*)" != '/sys/class/power_supply/*' ] ; then
log "VERBOSE" "Not on AC and we have battery information in /sys/class/power_supply/BAT* -- checking minimum battery charge."
for BATT in /sys/class/power_supply/* ; do
BATT_TYPE=$(cat $BATT/type)
log "VERBOSE" "$BATT is of type $BATT_TYPE."
if [ "$BATT_TYPE" != "Battery" ] ; then
log "VERBOSE" "Not of type \"Battery\", skipping."
else
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
log "VERBOSE" "Checking levels for $BATT."
PRESENT=$(cat $BATT/present)
log "VERBOSE" "Present: $PRESENT."
# Only do if the battery is present
if [ "$PRESENT" -eq 1 ] ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
IN_UAH=0
IN_UWH=0
if [ -f $BATT/charge_now ] ; then
REMAINING=$(cat $BATT/charge_now)
IN_UAH=1 # charge_* is in microAmpere-hours
elif [ -f $BATT/energy_now ] ; then
REMAINING=$(cat $BATT/energy_now)
IN_UWH=1 # energy_* is in microWatt-hours
else
REMAINING=0
fi
if [ -z "$REMAINING" -o "$REMAINING" -eq 0 ] ; then
log "VERBOSE" "Battery does not report remaining charge. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
if [ -f $BATT/charge_full_design ] ; then
CAPACITY=$(cat $BATT/charge_full_design)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full_design)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report design full charge, using non-design full charge."
if [ -f $BATT/charge_full ] ; then
CAPACITY=$(cat $BATT/charge_full)
elif [ -f $BATT/energy_full_design ] ; then
CAPACITY=$(cat $BATT/energy_full)
else
CAPACITY=0
fi
if [ -z "$CAPACITY" -o "$CAPACITY" -eq 0 ] ; then
log "VERBOSE" "Battery does not report non-design full charge."
CAPACITY=0
fi
fi
log "VERBOSE" "Full capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# $BATT/alarm is the design_capacity_warning of a battery.
ALARM_LEVEL=$(cat $BATT/alarm)
if [ "$ALARM_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$REMAINING" -le "$ALARM_LEVEL" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values
if [ "$IN_UAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MAH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_UWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge $((1000*"$MINIMUM_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge $((1000*"$AUTO_HIBERNATION_BATTERY_CHARGE_MWH")) ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh, uWh, mAh or uAh."
fi
else
log "VERBOSE" "Battery is not present."
fi
fi
done
elif [ "$(echo /proc/acpi/battery/*)" != '/proc/acpi/battery/*' ] ; then
log "VERBOSE" "Not on AC and we have batteries in /proc/acpi/battery -- checking minimum battery charge."
for BATT in /proc/acpi/battery/* ; do
PREV_ENOUGH_CHARGE=$ENOUGH_CHARGE
PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
BATT_STATE=$BATT/state
BATT_INFO=$BATT/info
log "VERBOSE" "Checking info and state for $BATT."
# Only do if the battery is present
if ( grep -q 'present:.*yes' $BATT_INFO ) ; then
FOUND_AN_ENABLED_CHECK=0
FOUND_AN_ENABLED_HIBERNATION_CHECK=0
# Get the remaining capacity.
REMAINING=`grep "remaining capacity:" $BATT_STATE | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$REMAINING" ] ; then
log "VERBOSE" "Battery does not report remaining charte. Perhaps it is not present?"
REMAINING=0
fi
log "VERBOSE" "Remaining charge: $REMAINING"
CAPACITY=`grep "design capacity:" $BATT_INFO | sed "s/.* $[0-9][0-9]* $.*/\1/" `
if [ -z "$CAPACITY" ] ; then
log "VERBOSE" "Battery does not report capacity. Perhaps it is not present?"
CAPACITY=0
fi
log "VERBOSE" "Design capacity: $CAPACITY"
# Check the charge percentage
if [ "$MINIMUM_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Minimum battery"
log "MSG" "charge checking does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$MINIMUM_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$CAPACITY" -eq 0 ] ; then
log "MSG" "WARNING: Battery does not report a design capacity. Auto hibernation"
log "MSG" "does not work without a design capacity."
ENOUGH_CHARGE=1
elif [ "$(($REMAINING * 100 / $CAPACITY))" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
# Fallback: hard values.
# Determine the reporting unit.
IN_MAH=0
IN_MWH=0
if ( grep -q mWh $BATT_INFO ) ; then
IN_MWH=1
elif ( grep -q mAh $BATT_INFO ) ; then
IN_MAH=1
fi
if [ "$IN_MAH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MAH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
elif [ "$IN_MWH" -ne 0 ] ; then
if [ "$MINIMUM_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_CHECK=1
if [ "$REMAINING" -ge "$MINIMUM_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" -ne 0 ] ; then
FOUND_AN_ENABLED_HIBERNATION_CHECK=1
if [ "$REMAINING" -ge "$AUTO_HIBERNATION_BATTERY_CHARGE_MWH" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "ERR" "Failed to determine battery charge. Battery charge units are not in"
log "ERR" "mWh or mAh."
fi
CAP_STATE=`sed -r 's/^capacity state:\s*(.*)\s*$/\1/;t;d' "$BATT_STATE"`
if [ "$DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
# Restore the state we had before checking this battery, so that
# this battery does not count as having enough charge.
ENOUGH_CHARGE=$PREV_ENOUGH_CHARGE
elif [ "$FOUND_AN_ENABLED_CHECK" -eq 0 ] ; then
# This is the only check that is enabled. In that case a non-critical
# battery level counts as "enough". (If we would count non-critical
# battery levels as enough *always*, then the other settings would
# have no effect; this is only a final fallback.)
ENOUGH_CHARGE=1
fi
fi
if [ "$AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL" -ne 0 ] ; then
if [ "$CAP_STATE" = "critical" ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=$PREV_ENOUGH_CHARGE_TO_PREVENT_HIBERNATION
elif [ "$FOUND_AN_ENABLED_HIBERNATION_CHECK" -eq 0 ] ; then
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
fi
fi
else
log "VERBOSE" "Battery is not present."
fi
done
else
ENOUGH_CHARGE=1
ENOUGH_CHARGE_TO_PREVENT_HIBERNATION=1
log "VERBOSE" "Not on AC and could not check battery state -- data loss sensitive features stay enabled and auto-hibernation will not work."
fi
if [ "$ENABLE_AUTO_HIBERNATION" -ne 0 -a "$ENOUGH_CHARGE_TO_PREVENT_HIBERNATION" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the auto-hibernation level."
log "VERBOSE" "Starting hibernation."
if [ -x $HIBERNATE_COMMAND ]; then
$HIBERNATE_COMMAND
elif [ -f /sys/power/state ]; then
grep -q disk /sys/power/state && echo disk > /sys/power/state
fi
# Don't continue -- if things are configured correctly, then we
# will be called on resume.
exit 0
fi
if [ "$ENOUGH_CHARGE" -eq 0 ] ; then
log "VERBOSE" "None of the batteries have a charge above the minimum level."
log "VERBOSE" "Deactivating data loss sensitive features."
ACTIVATE_WITH_POSSIBLE_DATA_LOSS=0
fi
fi
if [ "$INIT" -eq 0 ] ; then
log "MSG" "Laptop mode "
fi
# WAS_ACTIVE is used later on. If there is no /var/run/laptop-mode-tools/state, then
# we know that laptop mode wasn't active before.
WAS_ACTIVE=0
log "VERBOSE" "Checking if desired state is different from current state."
if [ -f /var/run/laptop-mode-tools/state ] ; then
read WAS_ACTIVE WAS_ON_AC WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS WAS_STATE < /var/run/laptop-mode-tools/state
if [ "$WAS_STATE" != "" ] ; then
if [ "$WAS_ACTIVE" -eq "$ACTIVATE" -a "$WAS_ON_AC" -eq "$ON_AC" -a "$WAS_ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -a "$WAS_STATE" = "$STATE" -a "$FORCE" -eq 0 ] ; then
log "MSG" "$STATE, "
if [ "$WAS_ACTIVE" -eq 1 ] ; then
log "MSG" "active [unchanged]"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "not active [unchanged]"
fi
exit 0
fi
fi
else
log "VERBOSE" "/var/run/laptop-mode-tools/state does not exist, no previous state."
fi
echo "$ACTIVATE $ON_AC $ACTIVATE_WITH_POSSIBLE_DATA_LOSS $STATE" > /var/run/laptop-mode-tools/state
if [ "$ACTIVATE" -eq 1 ] ; then
log "MSG" "$STATE, active"
if [ "$ACTIVATE_WITH_POSSIBLE_DATA_LOSS" -eq 0 ] ; then
log "MSG" " (Data-loss sensitive features disabled.)"
fi
else
log "MSG" "$STATE, not active"
fi
# Finally, call laptop-mode-tools modules. The modules can use the settings
# from the config files, but they may NOT assume the settings actually exist,
# as no defaults have been given for them.
# Note that the /usr/local/lib path is deprecated.
export FORCE STATE ON_AC ACTIVATE ACTIVATE_WITH_POSSIBLE_DATA_LOSS KLEVEL KMINOR WAS_ACTIVE LM_VERBOSE DEVICES
for SCRIPT in /usr/share/laptop-mode-tools/modules/* /usr/local/lib/laptop-mode-tools/modules/* /usr/local/share/laptop-mode-tools/modules/* /etc/laptop-mode/modules/* ; do
if [ -z "$MODULES" ] ; then
# If a module list has not been provided, execute all modules
EXECUTE_SCRIPT=1
else
# If a module list has been provided, execute only the listed
# modules.
EXECUTE_SCRIPT=0
for MODULE in $MODULES; do
# Attempt to remove the module name from the end of the
# full script path. If the module name matches the
# script, the name will be removed from the end of the
# full file path, leaving the path to the script. If
# there was not a match made, the module name would not
# be removed from the path, and $PATH_TO_SCRIPT would
# be the same as $SCRIPT.
PATH_TO_SCRIPT=${SCRIPT%%$MODULE}
# Execute the script if a match was found (module name
# was removed from the script path, making it shorter.
if [ $PATH_TO_SCRIPT != $SCRIPT ] ; then
EXECUTE_SCRIPT=1
fi
done
fi
if [ -x "$SCRIPT" -a $EXECUTE_SCRIPT -eq 1 ] ; then
log "VERBOSE" "Invoking module $SCRIPT."
SCRIPT_DEBUG=$SCRIPT; # We do this because in start-stop-programs module a $SCRIPT variable is used. That
# changes the whole meaning when passed to disableDebug ()
enableDebug $SCRIPT_DEBUG;
. $SCRIPT
disableDebug $SCRIPT_DEBUG;
else
log "VERBOSE" "Module $SCRIPT is not executable or is to be skipped."
fi
done
exit 0
# This fi closes the if for "readconfig". If I would have indented this one
# I would have indented the whole file. :)
fi
lmt_load_config
lock_retry ()
( $FLOCK -n -x -w 1 8 || exit 0;
i=10;
while [ $i -ge 1 ]
do
log "ERR" "Couldn't acquire lock. Retrying.... PID is $$\n"
$FLOCK -x -w 1 9 && lmt_main_function "$@" && break;
i=$(( $i - 1 ))
done
) 8>$LMT_REQ_LOCK
# Check and acquire locks and then exec.
( $FLOCK -n -x -w 1 8; ) 8>$LMT_REQ_LOCK
($FLOCK -n -x -w 1 9 && lmt_main_function "$@";) || lock_retry "$@"
) 9<>$LMT_INVOC_LOCK
# We do a special run of battery polling daemon here so that it does not get
# plagued by the lock. We need the polling daemon to be independent of any locks
if [ x$ENABLE_BATTERY_LEVEL_POLLING = x1 ] && [ x$BLACKLIST_IN_FLOCK = x1 ]; then
log "VERBOSE" "Battery level polling is enabled."
if [ x$ON_AC = x1 ] ; then
log "VERBOSE" "On AC, stopping the polling daemon."
# In AC mode we disable the polling daemon.
killall -q lm-polling-daemon
else
if ! pidof -x lm-polling-daemon ; then
log "VERBOSE" "On battery and there was no polling daemon yet, starting the polling daemon."
# If there is no polling daemon, we start one.
/usr/share/laptop-mode-tools/module-helpers/lm-polling-daemon < /dev/null > /dev/null 2> /dev/null &
fi
fi
else
log "VERBOSE" "Battery level polling is disabled."
fi
exit 0;
and here is the lines which archwiki mentions
case "$KLEVEL" in
"2.4" ) ;;
"2.6" ) ;;
log "ERR" "Unhandled kernel version: $KLEVEL ('uname -r' = '$(uname -r)')" >&2
exit 1
esac

I had the problem but edited the line in /usr/sbin/laptop_mode and it worked. But thoes lines are not there anymore. I guess they changed it at the recent update of laptop-mode-tools.
Regarding your heat problem; is there any other thing you use to cut down power usage (from AUR maybe)? I use acpi_call from AUR had to edit lines there aswell, but it should be updated by now.

CS3 reinstall problem - asking for uninstalled CS4 beta

I have a PowerBook G4 with 1.5 Gb RAM running Mac OS 10.4.11. I have the CS3 Suite installed and last year downloaded a beta copy of Fireworks CS4. After using it a bit, I uninstalled Fireworks CS4 with the Adobe uninstaller.
I recently had a problem with Bridge and decided to uninstall and reinstall the software. I uninstalled Photoshop CS3 (in order to uninstall Bridge) and when I began to reinstall Photoshop, the installer ask me to insert the Fireworks CS4 disk! Since I don't have that disk, I hit cancel and the install terminated (I tried this multiple times and rebooted each time)
I then downloaded and ran Adobe's CS4 Cleanup app. It found NO CS4 apps to clean up.
Any suggestions would be appreciated.
Mark

Thanks Neil and Buko for your input. Here's where things stand now:
1) I uninstalled FW CS4
2) I uninstalled CS3
3) I ran Cleanup Script
4) I repaired permissions using Disk First Aid
5) I reinstalled CS3
The problems with Bridge remained (sluggish, won't display icons properly, won't show a preview image, won't operate the folder list, etc.).
So I called Adobe support. Unfortunately, because I am having problems installing CS3 and NOT CS4, support is NOT FREE. The rep was helpful though -- she pointed me to document number 331594 (Diagnosing Bridge problems) and told me to start there. I followed EVERY step . . . disable start-up scripts, reverted to original preferences, cleaned up the cache, disabled the folder windows, and the problems remain.
Guess I'll have to pay . . .
Lesson learned: don't trial Adobe software. That's when my problems began.

Premiere CS3 Reinstall Problem

I am currently running Windows XP Pro on a Matrox Axio system in which the CS3 Creative Suite was already installed for me upon purchase. As of late I've had problems with Quicktime (Premiere and After Effects no longer see it as a compatible format) and I was hoping that as a solution, I could reinstall Premiere and After Effects from the original discs.
This theory might work but when I get the disc to the Progress portion of the reinstall, it asks me to "insert CS3 Production Premium Disc 1 into drive \\prod\Adobeapps". I don't claim to be an expert but I just cannot figure out what the installer is asking me to do and I'm very frustrated. I tried a multitude of Quicktime-related fixes that didn't yield results and I was really hoping to try this particular fix to see if it works. Does anyone have experience with this error? If so, what was your method of bypassing it?
If this helps in any way, Quicktime stopped working with my system when one day Premiere couldn't get past the CompilerAIFF.prm during the initial program load. I went back a few hours on a system restore and when I got Premiere up and running again, Quicktime was no longer a viable option. I've tried totally reinstalling stand alone Quicktime (and I did use the Windows Installer Clean Up to remove iTunes and Quicktime before the reinstall) and I've tried repairing Quicktime in the Control Panel, and helped. In fact, attempting to repair Quicktime led to a "fatal error on install" and put me back where Premiere got hung up on the CompilerAIFF.prm again.
Any help I could get would be much appreciated.

Thanks Neil and Buko for your input. Here's where things stand now:
1) I uninstalled FW CS4
2) I uninstalled CS3
3) I ran Cleanup Script
4) I repaired permissions using Disk First Aid
5) I reinstalled CS3
The problems with Bridge remained (sluggish, won't display icons properly, won't show a preview image, won't operate the folder list, etc.).
So I called Adobe support. Unfortunately, because I am having problems installing CS3 and NOT CS4, support is NOT FREE. The rep was helpful though -- she pointed me to document number 331594 (Diagnosing Bridge problems) and told me to start there. I followed EVERY step . . . disable start-up scripts, reverted to original preferences, cleaned up the cache, disabled the folder windows, and the problems remain.
Guess I'll have to pay . . .
Lesson learned: don't trial Adobe software. That's when my problems began.

Wierd Poly Lasso Tool problem

Hi, I just started using PS on Mac, and having a polygonal lasso tool problem, when I make any selected area with the poly lasso and complete the shape, say for instance a series of sun rays, it ends up with a bunch of boxes in the shape, that I didn't put there, I'll attach a screen shot, any idea what is going on?

Hi, yeah, i tried that, have there been any bugs that relate to the polygonal lasso tool?
heres a post with the same problem, but no fix- this seems really silly
http://forums.adobe.com/thread/495664?tstart=0

Brush Tool problems

I am having an ongoing problem with the Brush Tool in my PSE9.
I have the question written out in Word Pad but I can't seem to copy & paste it into this box. The 1st thing I need to know is how to copy & paste my simple text question here.
Bob

Barbara B.:
It has been several days since I heard anything from you on my ongoing Brush Tool problem. From your digging what have you found? In the past 10 days I have continued spotting B&W negative scans & trying to collect additional information on the propensity of the brush tool to create a line running across the image. Basically what I have found reinforces the 7 points/factors I outlined in posting #14 on 7/7/12. I'll go over & expand on those again here.
1) When the line runs it always goes from where I am currently spotting to some point I previously clicked & put a spot. This is not necessarily the most recent spot. It can travel to a spot I did 30 sec. ago (& have done several others in the interim). It does need to be on the visable portion of the screen.
2) As stated. The width of the line is the same as the width of the specific selected brush size. Usually between nos. 4 & 9. The tone of the line is the same as the tone selection (so far I have only experienced this with B&W).
3) The more I spot the slower the computer's reaction time becomes. After spotting for an hour, or two, I will see several seconds between the time I click on a spot & the time the spot actually appears on the negative. I have tried turning off PSE & rebooting it. This seems to speed things back up for a while.
4) When the situation in #3 occurs I obviously can't click rapidly.
5) I still don't understand why this happens at all. I move the curser outside of the image frame towards the Vert. & Horz. slider as I get ready to move to a new part of the image. I place the curser on the slider control a left click (as though to move the slider). Instead of moving the slider it shoots one of these lines out onto the image from under the slider control & out onto the image field to some point where there was a previous spotting click. These lines will often run half way across the image field. I have saved some of these examples & could attach them to an email for you to see.
6) Once one of these lines start appearing, or running, they seem to increase with frequency. Almost as though the software is developing a memory. As I say in #3, if I re boot PSE the memory either is erased, or at least reduced.
7) The only time the original statement is not totally true is when a line runs from under the slider (which is outside the viewing area) out into the visable image field.
Here are some additional factors I have noticed:
8) I normally begin spotting by setting the view drop down to "actual pixels". I notice that If I further magnify the image by then clicking once on the "zoom in" option I have a reduced frequency if these wild lines appearing. This may be due to the fact that when the image is larger I am working (stippling) at a slower rate.
9) If I have a hair or scratch on the neg. (normally using a drawn line to obliterate) & I use a stippling/clicking pattern rather than a drawn line the frequency or chance of a free running line is reduced - not eliminated, but reduced

ELEMENTS 9 (LASSO TOOL PROBLEM)

ANY GOOD NEWS FROM PHOTOSHOP ON THE CONTINUING LASSO TOOL PROBLEM, LIKE , WHY DOES,NT IT WORK?

Try the Quick Selection tool for more control. Simply press the Alt key to change from plus to minus to correct mistakes as you go.

Viewing large Illustrator CS3 files problem

I use bridge to browse through previous work in created in Illustrator CS3.
Problem - when viewing these files in Bridge some files (whatever their dimensions) show as large thumbnails and others (with the same AI dimensions) are small and do not seem to stretch in Bridge?
Can anyone explain how to stretch the thumbnail in Bridge.

Sorted - I need to save the CS3 file with 'create pdf compatible file' checked in the options, and it then opens as a large thumbnail in bridge.

HELP! Selection tool problems cs3

Suddenly my selection tool(v) will now only select as the direct selection.
How do I fix this?

It looks as if you've accidentally hidden the bounding box. Go to View>Show Bounding Box, or keyboard shortcut command [control]-shift B.
Peter

Bridge won't launch from CS3 - intermittent problem

Hi folks I dont think I am alone in experiencing this problem as a quick google threw up other sufferers but the suggested fix update everything at the Adobe website has not fixed the problem, so I am hoping that someone here can shed some light. Problem 1; Bridge will sometimes not open from CS3 - ie when I click on the icon , or if Bridge is set up to open automatically when CS3 opens, I sometimes get an error message that reads error 2:Photoshop is undefined. Line: 1 ->photoshop10.invoke bridge (false, false, ); When this happens Bridge will still open fine from the start menu, so it is not disastrous but is annoying because the keyboard shortcut <shift ctrl W > won't work either (to close a file in CS3 and bring the Bridge window up on screen) - a similar error message is received when using Shift Ctrl W as when trying to open bridge. Problem 2; the fly out menus will not remain on screen. Eg if I have a layer and want to access the blend mode menu - if I click on the menu in the layer palette the menu appears for a second and then disappears. Problem 3: If I try to create a new action as soon as I click on the "new action" in the actions palette the word "scripts" appears multiple times in the action - it just produces line after line of this until I click the button to stop the action. Problem 4 (may be related to problem 2 ?); in the crop tool - I can't get the cursor to remain in the width and height boxes - so I can't control the dimensions of the crop (which is currently stuck at my last size of 3 x 4 cm - not much use to man nor beast). Most frustratingly of all - these are all intermittent problems. Things I have tried - updating CS3 and bridge from Adobe site, opening CS3 and bridge before any other program, not running any other program at the same time, uninstalling and reinstalling (after disabling all antivirus etc stuff), but so far nothing works. I am using a 1 year old Dell PC, lots of RAM and hard drive available, only working from internal drives, no new hardware or software loaded (although there might have been a windows update - but this occurred after the problems started and has not noticeably changed things). Windows XP pro. Recently done whole system scan for viruses etc and no problems found. Please help, this has been going on since I loaded CS3 a few months ago and it is driving me nuts. Thanks Amanda D'Arcy

Amanda - One consistent recommendation that has fixed a lot of problems, especially if program worked before, and does not now, is to reset preferences. This is not the same as uninstalling and reinstalling, as the preference file is not affected with that operation.
Since it is intermittent problem this will probably not help, but worth a shot.
When it does not work is there some process that is running, like a anti-virus scan, or?
What about startup scripts in Bridge? Disable any you do not need.

Illustrator CC Rotate Tool Problem

So I'm not sure if anyone else is experiencing this problem, but it seems I'm having issues with the accuracy of the rotate tool in Illustrator CC. When I rotate an object 90 degrees (either by entering in the rotate angle value or using the free rotate tool), the anchors no longer line up exactly. Here's a sample image showing what I'm referring to:
Note the red arrow pointing to the line not being straight. After I release the rotation (holding shift), it still isn't straight. Anyway, this is really starting to bug me. My software is up-to-date and I haven't seen Adobe release anything on this. Has anyone else noticed/encountered this? If so, does anyone know of a fix for it?

dj,
It does look rather strange: everything seems to be right, except for the two short not quite horizontal segments.
As far as I can see it rules out both an Align to Pixel Grid and a Constrain Angle issue.
With no clue, I have no clue whether the following may help.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

10.5.3 Seems to have solved Photoshop CS3/Spaces problem

I've just backed up and installed the 10.5.3 update. The only remaining problem with PS CS3 and Leopard was using Spaces and finding out that the Palettes, Tool Bar and Options Bar would frequently not redraw, depending on how you used Spaces. Twenty minutes worth of testing and that issue seems to have been resolved. The update for my Mac Pro was 420mb and required one OKed and two automatic restarts. It's a bit of a process.
So far so good!

Hi Everyone!
I too have this bug on my Mac Pro at work and my iMac at home. I use Spaces religiously so this bug is extremely annoying.
I went ahead and reported this bug to Adobe. I suggest that everyone else do the same.
I haven't been able to fix the blinking cursor without restarting Photoshop but here are some ways to avoid it:
1. Switch spaces using CTRL + Arrow Keys / Number of Space instead viewing all of the spaces in a grid.
2. If you are like me and prefer the grid you can avoid the blinking cursor by making sure the Type tool or Marquee tool is NOT selected in Photoshop before you switch Spaces. If you have another tool such as the Move tool selected when you switch Spaces you will not get the blinking cursor when you switch to the Type or Marquee tools after returning from another Space.
Let's hope Adobe gets this fixed ASAP.
Mike

InDesign Eyedropper Tool Problem or Bug?

I am running InDesign CS3 on Snow Leopard.
Issue: I working merrily on my way in a project when all of a sudden the Eyedropper Tool blitzes out on me by not copying text attributes correctly.
Though I cannot replicate the problem at will it happens maybe once every two weeks or so without warning.
100% of the time, when it happens, the text that I want to apply the attributes to retains the original font but an black outline is applied. It makes me think that I inerrantly toggled some control, but cannot what.
I reboot—nothing
Note: I do use stylesheets and manage them well.
When I create a new document the eyedropper works fine. Maybe it in inherent in a worked over document?
Any one sun inthis problem?
Snow Leopard
Model Name:    Mac Pro
Processor Name:    Dual-Core Intel Xeon
Processor Speed:    3 GHz
Number Of Processors:    2
Total Number Of Cores:    4
L2 Cache (per processor):    4 MB
Memory:    11 GB
Bus Speed:    1.33 GHz
Thanks!
Jeff

before loading a video
can you please do these steps?
1) load a color image
2) add a color balance adjustmament layer (don't close it)
3) use the eyedropper in Current layer mode
4) sample a color , with the eyedropper
5) move the color balance slider and watch the color palette
after close the image ->
1) load a color image
2) add a color balance adjustmament layer (don't close it)
3) use the eyedropper in All layers mode
4) sample a color , with the eyedropper
5) move the color balance slider and watch the color palette
can you please check it?
thanks Kelly

CS3 Tools Problem

Similar Messages

Maybe you are looking for