CS3 Uninstall does not remove files

I have just purchased CS5.5 Master Collection and have successfully installed the software that I wanted to install at this time -- no problem. Before I installed Master Collection CS5.5, I uninstalled CS3 which was on the computer -- I did not deactivate it. I ran the uninstall program as instructed and it took perhaps 20 minutes to supposedly clean everything out...I was pleased. However, upon restarting the computer and going to the applications folder, it seems that all of the CS3 folders still remain, taking up room. So, I ran the clean up software to clean out those files -- they are are still there. Uninstaller and the clean up program both show that CS3 is removed, but the files remain in Applications Folder. Can I just drag these remaining CS3 folders to the trash and get rid of them that way?
Small Town Gal.
I'm working on a Mac Pro with Snow Leopard 10.6.8

Dear Jeff,
CS3 has been replaced by CS5.5, so I assume that CS5.5 is all that I need. If I drag CS3 to the trash to remove it, will removing it that way remove any files that CS5.5 needs? Bridge CS3 did seem to have locked permissions, so I unlocked it, but it still doesn't appear anywhere for me to uninstall via installer. I also have an older version of Photoshop Elements 3 that I kept active for use of NIK filters, and that one doesn't appear anywhere either in Adobe Uninstaller -- can I drag PElements 3 to the trash without getting rid of any needed files?

Similar Messages

Reboot does not remove previous version - how rmove uninstalled version completely

reboot does not remove prior firefox, which was uninstalled - cannot run new install due to vestiges of earlier version detected - reboot required to remove, yet removal never complete, so never able to run new install. please provide diagnostic detect & remove for any firefox items left on system

You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
It may be better to remove all versions of Reader, and then download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Photoshop does not close files and the program does not quit.

I have been on the phone with tech support for over an hour. Photoshop does not close files and the program does not quit. I am on a Mac and I am using Photoshop CC 2014.

Have you tried uninstalling Photoshop CC and re-installing? Another thing to try is to remove all Photoshop CC plist files. There is also the Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Uninstaller utility does not remove the installation from the registry

In our environment, we publish a script in Group Policy so that both the ActiveX and Plugin installs for flash player are easily installed for staff that have limited user access on their computers. I usually remove or replace the old MSI files from the path the above script installs from when I get new versions of Flash Player. For a while, I've run into a problem where when the new MSI files are installed, they try to uninstall the existing installation and fail because the old MSI file is no longer at the original installation source path. I've tried to remedy this by having the script use the uninstall_flash_player utility to manually remove the activex and plugin first, but this utility does not remove the installation details of each from the registry, and the subsequent installations of the MSI files fail. I have to uninstall the existing flash player installations first or perform a registry hack to formally remove the installation from Windows, and then the new installation will succeed.
Does anybody have any advice for making this process work better? Would this be considered a bug with the uninstaller tool?

Hi, Until someone can reply to your thread/question, you may want to see this thread.
http://forums.adobe.com/thread/826773?tstart=0
eidnolb

Hp C310 e all in one. Print that is stuck in the print queue, cancel does not remove

hp C310 e all in one. I have a print that is stuck in the print queue, cancel does not remove says deleting. I have tried shutting down printer, closing word doc, multiple canel all prints. Any Ideas

Hello mackice,
Try these steps below to clear the print queue. The steps are listed for Vista and Windows 7 and would be slightly different for XP. If you are using a Mac then the steps below would not work. Please advise what OS you are using.
Option 1)
1. Click on start orb
2. Type in search window: "services.msc" (without the quotes)
3. click ok
4. Scroll down to Printer spooler service and click on it in the right side window.
5. On the left side click stop the service and wait forthe process to stop
(Do not close the window yet. You will have to restart it here later.)
6. next delete the print job in the printer queue
7. then restart the spooler service
8. Resubmit your new print job.
Option 2)
If that doesn't clear it, the next step would be to stop the spooler
service as stated above
Go into windows explorer
(Print job data is collected and stored in a spool file in the spooler
folder.)
It is located in:
C:\WINDOWS\system32\spool\PRINTERS
Your print job will show 2 files there Example below:
00002.SHD
00002.SPL
Delete the files located in there. There may be several of them
depending apon how many print jobs you submitted. You will have to
resubmit your print jobs all over again.
Next go back to services window and restart the spooler service
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all!

why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE

Trash – Empty When File is Locked or in Use
Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
Trash FAQ
Trash Permission Error
Trash Permission Error (2)
Trash Permission Error (3)

"netcfg2 -a" does not remove "/var/run/daemons/net-profiles"

hello!
i have found out, that a "netcgf2 -a" does not remove /var/run/daemons/net-profiles. after that i have to stop the net-profiles daemon by hand. i connect to networks with "netcfg2 <profile>", the net-profiles daemon will be started automatically by that command.
is this an issue?
another problem i have is, that netcfg2 even cannot connect to a network automatically, if i have two networks with the same beginning:
for example: network a: foo; network b: foobar - when i want to connect to "foo" it uses the "foobar" profile, because the name of the profile file is listed before the name of the file from network a.
bye iggy

The first thing: I thing netcfg2 should not touch anything in /var/run/daemons, since that's the job of scripts in /etc/rc.d/* It's the same for any daemon you run - if you kill it manually, not using /etc/rc.d/<whatever> stop, then you have to clean up /var/run/daemons/<whatever> yourself as well.
before connecting with netcfg2 there is no "net-profiles" in /var/run/daemons. after netcfg2 <profile> it is. after "netcfg2 -a" the file is still there, so it indicates net-profiles-daemon is still running.
Last edited by iggy (2008-05-06 13:52:28)

Java does not get file list from shared folder in another server.

Hi,
I'm using java 1.4.2.16,
Command below does not get file list.
import java.io.;*..
File file = new File("\\\\10.242.22.28\\SapMII");
File[] files = file.listFiles();
SapMII folder is Everyone full Control permission.
How can i solve this problem?
Thanks.

Could you please post replies in a more helpful way? Just informing me that it was an NPE doesn't really tell me anything. Post the stacktrace (Exception#printStackTrace()). And the listFile() methods API has this to say:
Returns null if this abstract pathname does not denote a directory, or if an I/O error occurs.I'm able to run this sample code easily:
import java.io.File;
public class TestFileList {
     public static void main(String[] args) {
          File file = new File("\\\\10.40.55.33\\shared");
          File [] files = file.listFiles();
          for(File currentFile: files )
               System.out.println(currentFile.getName());
}

Adobe Reader does not recognize file name (filename10.5.11.pdf) but does in Adobe Standard 9. Why?

I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files. For instance, when trying to open a PDF file with the name
filename10.5.11.pdf in Adobe Reader, the web browser will not open the PDF and the display is blank.   When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.

The version is Adobe Reader 10.1.0    I will request the latest version
and let you know if that fixes the problem
Actually I had changed the name of the file so our associates could access
the file (changed the . to a hyphen) It still made me wonder why Reader
wouldn't open it at that time.
Thanks again for you assistance and I will let you know if this resolves
the issue.
Regards,
Susan
From:   Ankit_Jain <[email protected]>
To:     SusanPleso <[email protected]>
Date:   10/19/2011 12:56 AM
Subject:        Adobe Reader does not recognize file name
(filename10.5.11.pdf) but does in Adobe Standard 9. Why?
Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
does in Adobe Standard 9. Why?
created by Ankit_Jain in Adobe Reader - View the full discussion
Hi Susan,
Thanks for providing the information.
Could you also let me know what is the exact version of Adobe Reader on
your system. You can check the same y clicking on Help > About Adobe
Reader X.
In case its not 10.1.1, please try updating to the latest version and see
if the problem persists.
Also, does any other PDF with a different filename open in Internet
Explorer correctly?
Thanks
Ankit
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3979020#3979020]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Install CS4 Production Premium from Design Premium CS3, but does not recognize CS serial number

Try almost half day already but still do not know how to overcome the problem.
My operation system is Windows XP SP3.
I am installing Production Premium CS4 and it is an update version from Design Premium CS3. I tried to input my CS3 serial number in when it is needed, but it always gave me "Invalid Serial Number". I tried to install the Design Premium CS3 to the computer. The serial number is right and programs work fine. Then I tried to install the CS4 again. First, it cannot find my CS3 just installed before. Second, the serial number for CS3 still does not work. Any idea?
I saw so many people posted the installation issues here. How come Adobe does not do anything to improve the product. I also called the customer support. After waiting 10 min, a guy asked my ID and then total silent. I called again and this time, I had to wait 20 min. Another guy told me this is tech issue so I need to call tech support. He gave me a 1-800 number but I tried, the number is invalid. I have been thought Adobe is a good company before. I really need to rethink that.

Thanks, Bob. Indeed, it was my typo in the message (not CS, should be CS3). My purchase was right (I even discussed with Adobe Store person before I placed the order). I have Design Premium CS3 and the updates I brought is the one which can update from Design Premium CS3. Actually in the menu where I can input my CS3 serial number, it has several options and one of them is exactly Design Premium CS3. See this page: http://www.adobe.com/products/creativesuite/production/upgrade/ (I ordered the 2nd option. I ordered from a vendor which charged me $579).

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

[svn:bz-trunk] 17920: Fix for WebLogic: WebLogic does not provide File IO on the deployed artifacts hence using getResourceAsStream .

Revision: 17920
Revision: 17920
Author:   [email protected]
Date:     2010-09-29 05:56:06 -0700 (Wed, 29 Sep 2010)
Log Message:
Fix for WebLogic: WebLogic does not provide File IO on the deployed artifacts hence using getResourceAsStream.
Modified Paths:
    blazeds/trunk/apps/samples/WEB-INF/src/flex/samples/marketdata/Portfolio.java

check the server log;
/app/oracle/product/fwm11g/user_projects/domains/fwm_domain/servers/AdminServer/logs/AdminServer.log
you can launch the console and see if it is running; http://<server>:<port>/console

I want to import bookmarks from Safari on the Mac same computer. Firefox help says Menu Bar/File/Import. My Firefox does not have File/Import option. How do I import bookmarks from Safari to Firefox?

I want to import bookmarks from Safari on the same Mac computer. Firefox
Help says use Menu Bar/File/Import.
My Firefox does not have File/Import option.
How do I import bookmarks from Safari to Firefox?

Import and Backup is the third (last) button on the toolbar in the Bookmarks Manager (Library) that looks like a star.<br />
Other platforms show the text label, but on Mac you only see toolbar icons.

Adobe Reader XI does not open files with a command line "path" argument.

Adobe Reader XI does not open files with a command line "path" argument. Version X and lower all worked fine. I have deleted and reinstalled the program with no success. Is this a bug?

Hi Daniel,
What is the make of the printer and is it using PCL or PS driver.?
Do you have Acrobat installed on this machine as well?
Please check if 'Print Spooler' service is running on the machine.
Regards,
Rave

CS3 Uninstall does not remove files

Similar Messages

Maybe you are looking for