CS3 Vista, "Installation der Komponente fehlgeschlagen"

CS3, Windows Vista
Hallo,
nach der Fehlermeldung "Lizenzierung funktioniert nicht mehr" hatte ich wie empfohlen CS3 deinstalliert und neu installiert. Das Problem wurde damit nicht gelöst. Auch nicht durch Ausführen von LicenseRecover.exe für CS3. Also habe ich nun CS3 erneut komplett deinstalliert.
Was muss vor einer Neuinstallation tun, um nicht wieder für jede Anwendung die Meldung "Installation der Komponente fehlgeschlagen" zu erhalten?
Danke für eine Antwort.

Hab ich dir doch schon geschrieben - die caps.db löschen. außerdem gibt es einen Bug in CS3, wo man das in der Regel doppelt-gemoppelt machen muss. Also
caps.db löschen
neu installieren
Fehler kommen
normal deinstallieren ohne caps zu löschen
nochmal installieren
Mylenium

Similar Messages

  • Problems with Windows Vista Installation

    Hi, I'm a new Mac user. I just received my Macbook about a week ago, and I am, so far, impressed with it.
    However, I have been experiencing difficulties installing Windows Vista (SP1, 32bit DVD) via Boot Camp. After partitioning to a 32gb drive, I insert my installation DVD and click "Start Installation." After my computer reboots, the CD drive begins spinning, but then my screen is filled with black. Only a little white blinking underscore appears at the top left.
    I've left my computer there for a while, in hopes of something occurring, but to no avail.
    Is there anyone able to help me figure out how to smoothly run the Windows Vista installation? I'd love to catch up on work and gaming that I've missed this past week.

    Todd Thieu wrote:
    Hi, I'm a new Mac user. I just received my Macbook about a week ago, and I am, so far, impressed with it.
    However, I have been experiencing difficulties installing Windows Vista (SP1, 32bit DVD) via Boot Camp. After partitioning to a 32gb drive, I insert my installation DVD and click "Start Installation." After my computer reboots, the CD drive begins spinning, but then my screen is filled with black. Only a little white blinking underscore appears at the top left.
    I've left my computer there for a while, in hopes of something occurring, but to no avail.
    Is there anyone able to help me figure out how to smoothly run the Windows Vista installation? I'd love to catch up on work and gaming that I've missed this past week.
    Welcome to the Apple boards:
    There have been some "issues" with BC and the newest Vista which has embedded SP1.
    I am running Vista Ultimate 64-bit on this box, but I installed it under Tiger and BC 1.3 beta and just kept upgrading.
    I recently installed Vista SP1 and BC2.1, but you are starting from the top, so to speak.
    I am not sure there is an answer yet for your situation.
    Other posters may be of assistance.
    Message was edited by: nerowolfe

  • Boot Camp Problem with Windows Vista Installation

    After putting in the disc and pressing the "Start Installation" button, the macbook pro restarts and and the screen goes gray for quite awhile, eventually the Vista installer loads, but I get the following error and cannot continue:
    "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
    Note: If the Windows intallation media is in the CD/DVD drive, you can safely remove it for this step."
    I can't put in the OS X 10.5 Disc because the eject button does not work, and i've tried copying the files from the disc onto a flash drive and getting it from there.

    Windows Install Disc was defective

  • Unable to repair failed Vista installation

    I have an Acer desktop PC running Vista Home Premium which is refusing to boot with the following symptoms:
    When I try to boot normally I get as far as the Windows loading screen with the moving bar, after that the screen goes black apart from the pointer and never gets any further.
    I get the same result if I try to boot into safe mode except that, of course, instead of the moving bar I can see the various files loading up to and including Windows\System32\drivers\disk.sys
    I have tried using a Vista installation DVD to repair but this is unable to find any operating systems to repair. 
    If I use the Vista installation DVD to go into command mode then bootrec /scanos is also unable to find Windows installations.  In fact when loading from the DVD I don't seem able to see my hard drive at all!  E.g. Diskpart LIST DISK only shows
    removable drives with no media (presumably the ones on my internal card reader).  Typing C: gives a drive not ready message.
    I've also tried booting from the recovery partition using Alt and F10 during boot but this only gets as far as the "Please wait a moment" screen and stays there forever.
    I've even tried re-installing Vista from the Vista installation DVD but this stops and asks for a driver for the DVD drive and will not carry on without it.
    Can anyone suggest any way to get the PC working again - I don't need any of the data on it so don't have to worry about saving any data files.
    The thing that is really puzzling me is that I can partly boot from the hard drive but then the hard drive seems to be missing when I boot from the Vista installation DVD.
    Rob

    Hi
    This is very strange
    How did you try to install the OS from recovery disk?
    Did you boot from the CD and did you follow the instruction on the screen?
    Or what happens exactly???
    Usually the Recovery disk should format the whole HDD and should set the notebook to the factory settings.
    Furthermore the Vista is already activated and its not necessary to put any serial keys.
    I see in the error message something about Security-Licensing. Im not quite sure what this can be but possibly the could be something wrong with the activating who knows ?:|
    But as I said above, the Vista on the recovery disk is already activated.

  • Cannot use product key for Vista installation on my Satellite U400-112

    HI, NICE DAY
    I BOUGHT TOSHIBA SATELLITE U400-112 , WINDOWS VISTA , I FORMATED MY LAPTOP THEN I SETUP WINDOWS VISTA , BUT WHEN I INTRED THE PRODUCT KEY (THAT IN THE LAPTP`S STICKER) , A MESSAGE APPEAR AND TELL THE P K IS INVALID !!!
    BY THE WAY, MY WINDOWS VISA IS A COPY CD OF THE ORIGENAL VISTA, IT CAN BE UPTATED BUT DOES`T ACCEPT MY LAPTOP PRODUCT KEY!!!
    WAIT FOR HELP, THANKS.

    hi
    i get answer by search results
    ther is
    Hi!
    The product key on the bottom side of the notebook is an OEM key and belongs to the preinstalled OEM version. That means you can??t use this key with a normal Vista installation disk that you can buy on the internet or from a computer shop.
    If you want to install Vista you should a Toshiba recovery disk or a Microsoft disk with the corresponding product key.
    You can order a Toshiba recovery disk from Toshiba directly:
    https://backupmedia.toshiba.eu/landing.aspx
    Bye
    thanks

  • Problems with Vista Installer CD

    I created a 5GB partition on my MacBook, and after I inserted the Vista installer CD in Bootcamp, I realized that the partition needed to be bigger. I should note that I created the partition in Disc Utility because it wouldn't work in Bootcamp. It is FAT formatted. In the Vista installer, I formatted it to Vista, but there was still an error message saying it was too small. The expand button wasn't avaliable for that partition. So now I have two questions, but I only need one of them answered to move forward.
    It seems I can either expand the partition in the Vista installer, or I can exit that and expand it in Disk Utility. First, how can I edit the partition without exiting Vista? If I can't do that, how do I exit Vista? Restarting while holding down Option or Apple hasn't worked.

    Which keys have you tried using? Sometimes I cannot get the "C" key to work when I'm booting so I always use the "Option" key at boot immediately after the BONG at boot. Have you tried the option key? If/when you're able to get back into OS X, then I would immediately go into System Preferences and make the Start Up disk the OS X disk. That way you shouldn't have this problem again.

  • How to download latest InDesign CS3 Server Installer?

    Hi there,
    Anyone can help me point to the right direction, how to download the latest InDesign CS3 Server Installer (without the error).?
    been looking for couple of days in this adobe site, but nothing found.
    Thank you.
    Regards
    Jimmy Harjadi

    I would guess you'll need to contact customer service. CS3 products are no longer posted as demo downloads. InDesign server is a licensed product, and presumably if you bought the license you were given media or a link at that time. If you've lost that, Customer service would be th only ones who can help.

  • Windows Vista Installation Hangs on "Completing Installation" on Dell Inspiron 1720

    I have a Dell Inspiron 1720 that I am working on. The original problem with this computer was that it was accidently shut off during a Windows Update. The computer will only load to a black screen with a white movable cursor. 
    Unable to resolve that issue, I decided to purchase a replacement hard drive (WD Scorpio Black 320GB -- Model # WD3200KTRTL) and proceed to do a full install of Windows Vista using the Dell Reinstallation Window Vista Home Premium 32BIT disc that came with
    the computer. 
    Towards the very end of the installation, the system hangs on the "Completing Installation" section. I decided to leave the computer turned on over night just in case there were things that were still loading. This was not the case and the next morning I
    turned off the computer.
    With the new hard drive installed and with Windows Vista installed (minus the "Completing Installation hanging...) I am faced with the same problem as before when I had the existing hard drive installed. 
    Can anyone help me solve this issue? Ideally, I'd like to use the existing hard drive instead of the new one, simply because there is a lot of data and problems on the other drive. 

    How could it be that I can't reinstall Vista after replacing the hard drive in my Inspiron 1720 when I have the original DVD from Dell, to be used for just that purpose?  Well, the answer was exactly what Jaco suggested.  After hours of struggling
    with this, and about at the stage where a new computer made more sense that continuing to try to get this 6 year old one running again, changing the AHCI setting allowed the Vista installer to get over it's CRCDISK.SYS hangup.  A 30 second fix, but finding
    it took hours.  Sigh...Thank you for posting this, Jaco.

  • How to get Vista Installation Disk from Toshiba?

    I've been working with Microsoft support to resolve a security issue on my Satellite Pro A210, and have now been asked to use a Vista installation disk.
    Microsoft says that I am entitled to an installation disk from the original supplier of my kit - Toshiba. But one did not arrive with my laptop - only a recovery disk was supplied.
    How do I go about acquiring a Vista installation disk from Toshiba?
    Regards,
    Kevin C.

    Mores is right. Toshiba doesnt offer installations CD with operating system only. you will get recovery image.
    Recovery image definition:
    +Recovery Image is an exact copy of a computer's hard drive and contains the exact, byte-by-byte copy of a hard drive partition.+
    +The copy includes all the partition information, boot sectors, the file allocation table, operating system installation and different application software.+
    +Using Recovery installation CDs/DVDs, you can restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure complete.+
    +Recovery image installation procedure allows the user easy and fast system installation. Unfortunately it is not possible to restore only certain files from a disk image.+
    +Every recovery image is designed for one specific notebook model and it can not be used for any other notebook series.+

  • Installation der Canon X Mark Maus am MacBook Air funktioniert bei mit nicht.

    Hallo erst mal,
    die Installation der Canon X Mark Maus am MacBook Air funktioniert bei mir nicht.
    Bei der Bluetooth-Verbindungseinrichtung erkennt der Rechner die Maus, aber die
    Verbindung wird nicht hergestellt.
    Muß man bei der Installation eine Code-Nummer eingeben? Wenn Ja, welche?
    Hat irgend jemand schon mal die Canon Maus an einem Macbook installiert?
    mfg
    PS: an meinem Windows-Rechner hat die Intallation geklappt

    Danke, zur Sicherheit habe ich den Mac ohne Maus neu gestartet.
    Nach dem Einstecken der Maus, hat sich leider nichts geändert.
    Das hätte mich auch gewundert, da in den Einstellungen die Maus richtig erkannt wurde. Das heißt, die Grafik zeigte schon die richtige Maus und ich kann auch die einzelnen Tasten Einstellen. Nur das Ergebnis bleibt aus.
    Ich werde es später mal mit einer nicht-Apple-Maus versuchen. Vielleicht bringt das neue Ergkenntnise.
    Gruß und bis später
    Ralph

  • Re: NB200 vista installation

    Hi
    i need some help with vista installation on my nb200.
    Could you tell me where i can find the right driver/toshiba software for vista operating system.
    thanks a lot

    Toshiba US has some Vista Drivers for the NB200 series, some are XP/Vista and some are Vista/Win7 some are defined as beta...
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2336270& rpn=PLL20U&modelFilter=&selCategory=3&selFamily=23 36267
    These use the 945 chipset and Vista should have a video driver for it, if not it can be downloaded from Intel....
    http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2301&OS FullName=Windows+Vista*&lang=eng&strOSs=163&submit =Go%21
    I would make sure you upgrade the RAM to 2 GB. With all of that said, Windows 7 is a lighter OS and I would recommend that you wait for it, it releases October 22....
    HTH,
    Jeff

  • CS3 'freezed' installation problem on Windows Vista Home Premium.

    Hi! I searched everywhere for answer that installation of my PS CS3 is freezed in moment on the screen.
    I installed Acrobat Reader, Dreamweaver cs3 only. Both in English language.
    I tried to uninstall, then install, using cs3clean, but it`s nothing change in my situation. Even I tried to copy whole content of my cs3 installation disk to hard drive.
    Why installation is freezed ? The screen:
    http://img237.imageshack.us/img237/7184/cs3problemja8.jpg
    Ps. I`ve got Vista Home Premium.
    Thanks, best regards!
    Ps2. Sorry for my english :)

    Kasprzak,
    How long did you allow it to sit like this? Only reason that I ask is that I recently did an install on my laptop, and the DVD drive was EIDE and it took probably 20 mins. to get through each disc.
    For installation issues, Adobe offers free tech support. Check your documentation for the toll-free phone number in your country, or region.
    Hunt

  • Dreamweaver Cs3 & Vista

    I buyed a copy of Dreamweaver cs3 with OS Vista, but when I
    try to load the program, since the first time I tried, it remains
    on "Inizializiong Files", until I stop the process. What can I
    do?

    Maybe someone else can help you out with this because you are
    going to need to do the following steps and I just don't know where
    the log file is saved on the Windows side:
    1. Get the log file that the installer makes
    2. Come back to this website and click on Your Account at the
    top of the screen.
    3. Log in and click on Customer Support Portal
    4. Open up a support ticket. When you do there should be a
    way to upload a file to their FTP server for them to evaluate.
    Follow their steps exactly and upload your log file (it would be a
    good idea to rename your log file with at least your username).
    Then once you have done that wait for a response. They will
    be able to tell you exactly where the installer is failing by
    looking at the logs. It normally takes about 1-3 business days for
    them to respond though. It might not be as quick as a phone call,
    but if they don't know where the problem is, it is best to give
    them as much information as possible.

  • DW CS3 Vista compatible?

    Is Dreamweaver CS3 compatible with Vista?

    > Is Dreamweaver CS3 compatible with Vista?
    Windows Vista Home Premium, Business, Ultimate, or
    Enterprise (certified
    for 32-bit editions)
    (note that it does not say it's certified for 64 bit
    versions)
    http://www.adobe.com/products/dreamweaver/systemreqs/
    System requirements and languages
    Windows
    * Intel® Pentium® 4, Intel Centrino®, Intel
    Xeon®, or Intel Core Duo (or
    compatible) processor
    * Microsoft® Windows® XP with Service Pack 2 or
    Windows Vista Home
    Premium, Business, Ultimate, or Enterprise (certified for
    32-bit editions)
    * 512MB of RAM
    * 1GB of available hard-disk space (additional free space
    required during
    installation)
    * 1,024x768 monitor resolution with 16-bit video card
    * DVD-ROM drive
    * Internet or phone connection required for product
    activation
    * Broadband Internet connection required for Adobe Stock
    Photos* and
    other services
    Macintosh
    * PowerPC® G4 or G5 or multicore Intel® processor
    * Mac OS X v.10.4.8
    * 512MB of RAM
    * 1.4GB of available hard-disk space (additional free space
    required
    during installation)
    * 1,024x768 monitor resolution with 16-bit video card
    * DVD-ROM drive
    * Internet or phone connection required for product
    activation
    * Broadband Internet connection required for Adobe Stock
    Photos* and
    other services
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • CS3 + Vista + Epson R1800 = SLOWWW dialogues

    I've no clue why this is happening. When I select my R1800 printer in CS3 (it is not my default printer) all the dialogue forms throughout the printing process take about 2 minutes each. It practically freezes the computer. It happens immediately when I select the R1800 and disappears completely as soon as the last dialogue form is done (and the printer starts reacting).
    I have Vista and CS3 working fine at home with an R2200 Epson. Any ideas? It works fine with the other printer on my network (a Ricoh Multi-function system).

    I tend to think that it's an security issue with some of the helper processes for the printer. Epson printers launch a number of executables to display dialogs, status monitors and so on and they may either be hindered by limited permissions or run in compatibility mode. I'd investigate that and maybe re-install/ update the driver. Also make sure you run any installs as administrator on Vista. Likewise, attempt to print with full admin priviliges and see if it is any different. Lastly, if your printer comes with any soft-proof and RIP tools, try to not install them and use the printer directly. Maybe it's just the initialization of these tools that takes forever.
    Mylenium

Maybe you are looking for