CS3 will install, but not run in Windows 7 64bit

I bought a new HP e9220y last weekend. It has an AMD Phenom II Quadcore CPU and 8GB ram running Win7 64bit Home Premium. I installed Illustrator CS3 successfully and all files appear to be in the proper folders and programs are present on the start menu. But when I click on Illustrator or Bridge or anything else it installed, the wait cursor spins for about 10 seconds and then nothing happens. I tried uninstalling and reinstalling several times. I've run the MS cleaner utility. I've tried running in compatablility mode for Vista and Xp. No luck.
I tried downloading and installing Illustrator CS4 and it ran fine. No problems. I have a case open with Adobe tech support with all this but the four people I talked to all had no clue. It's been open and pending their reply for 5 days now. I guess they are stumped.
I read somewhere that someone else with my same processor had the exact same problem, but that was a couple months ago and that forum had no resolution.
Does anyone have a clue where I can start to solve this problem? Obviously, d/l'ing CS4 is a solution, but I was really hoping to avoid the added expense. I am already going to have to get a new scanner because mine doesn't like win7.
Help?

Turns out this is a system specific problem (AMD Quad Core) and a solution was discovered by someone in another forum. He wrote:
"Apparently the licensing software for adobe hated the amd quad cores, but they released a patch which corrects it. I found someone who did this in a random AMD forum and it works great."
http://kb2.adobe.com/cps/401/kb401528.html
I had to turn off my Trend Micro software to get this patch to run, but it worked!

Similar Messages

ITunes & QuickTime will install but not open after Windows XP laptop crash

Alright, this may be a repeat question from a long time ago, but I don't have the time to dig through 1,000+ posts so I'll just put it out there. Here's the situation:
*Backed up my entire hard drive including iTunes 8.1 and library to external drive using Roxio Back Up My PC (BUMP) creating a large .QIC file
*Two days later, entire computer crashes - says can't load from BOOT.INI upon start-up
*I re-install Windows XP service pack 2 operating system, install driver update and recovery disc, go through Windows Update and upgrade to service pack 3, etc.
*Do a system recovery from External Drive using same Roxio program, instead of a full restore, it duplicates the files I re-installed and maxes out my C:\ drive.
*Try everything I can to troubleshoot the problems on my own, defragment, disc clean-up, registry cleaner using RegCure, use Windows Installer Cleanup Utility, use File Duplicate Finder to wipe the dupes created by the restore, run Symantec Antivirus 2007 scan just in case, etc...
*Anyways, NOW getting to the iTunes related part: after the system restore, newest upgrade of iTunes 8.1 and Quicktime both don't work at all, they are installed in the same location in Program Files where they originally were housed, but when I click to open, it sends a standard Internet Explorer type error message, prompting either to debug, send troubleshoot message, etc.
*Finally, I un-install iTunes, re-install, same deal. The curious thing: practically all other programs work just fine, incl Windows Media Player, MS Office, all restored and in operational condition. Why the exception with anything Apple related?
Any advice would be MUCH appreciated considering I have 300+ gigs of music. Thank you in advance!!

Try these steps..
http://docs.info.apple.com/article.html?artnum=93976

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

Application built in LabVIEW 2011 installed successfully but not running on windows 8.

Hello all,
We have been using labview 2011 to develop datalogging applications. We have built the installer package for one of the applications by choosing the option 'windows XP or later' in 'Advanced' category. The installed application works fine in Windows 7 and earlier versions. But it doesn't seem to work in windows 8. When we try to run the application, the application doesn't load itself or show up but runs in the background consuming 75% of memory (as seen in the task manager).
Then we tried rebuilding the package by selecting 'windows 7 or later' option from advanced category. The problem persists. Running the application in compatibility mode of windows 8 did not help.
Please let us know how to fix this problem.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Ranjeet_Singh wrote:
I thinks it was AMD only. does it make any difference.
What is "AMD only"? Do you have the exact processor model?
LabVIEW 2011 has problems with some AMD processors, and some of the issues have been fixed in 2011 SP1 f1. I don't know if built application had similar problems.
LabVIEW Champion . Do more with less code and in less time .

Workflow Manager 1.0 will install but NOT configure.

Hello everyone,
     I have successfully installed Workflow Manager 1.0 (and its prerequisites) on my Server 2008 R2 SP1 machine
that is hosting Sharepoint 2013. I attempt to go into the Workflow Manager Configuration. That comes up and asks me if I want to Create new farm with Default Settings, New Farm with custom settings, or existing farm. I've tried both Default
settings AND Custom settings.
    When the configuration wizard comes up, I attempt to fill out the necessary information. It seems to connect
to the SQL server without a problem. I only run into an issue when setting the USER ID. The program totally freezes up and force closes.
    I have verified that the USERID is in the correct format and tried multiple different formats. The problem
is that the moment I move the cursor from the USERID field to ANY other field, the program force closes. I'm not able to hit submit, I'm not able to change any other options. The moment USERID is manipulated or the cursor LEAVES the USERID field,
the program force closes. It won't even allow me to put in a password before it force closes.
     Customer domain is running in Windows Server 2003 Enterprise Edittion SP2.
Any ideas?
Thank you very much!
I have copied the errors from event viewer below:
APPLICATION ERROR
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17965, time stamp: 0x506dcae6
Exception code: 0xe0434352
Fault offset: 0x000000000000bccd
Faulting process id: 0x17f8
Faulting application start time: 0x01cddee198ece72e
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 22ab8b69-4ad5-11e2-af8f-005056965915
.NET Runtime Error
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
at System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInitNoContainer()
at System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
at System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
at System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.TraversalRequest, System.Windows.Input.ModifierKeys, System.Windows.DependencyObject)
at System.Windows.Input.KeyboardNavigation.Navigate(System.Windows.DependencyObject, System.Windows.Input.Key, System.Windows.Input.ModifierKeys)
at System.Windows.Input.KeyboardNavigation.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Input.InputManager.RaiseProcessInputEventHandlers(System.Windows.Input.ProcessInputEventHandler, System.Windows.Input.ProcessInputEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputManager.ProcessInput(System.Windows.Input.InputEventArgs)
at System.Windows.Interop.HwndKeyboardInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawKeyboardActions, Int32, Boolean, Boolean, Int32)
at System.Windows.Interop.HwndKeyboardInputProvider.ProcessKeyAction(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.HwndSource.CriticalTranslateAccelerator(System.Windows.Interop.MSG ByRef, System.Windows.Input.ModifierKeys)
at System.Windows.Interop.HwndSource.OnPreprocessMessage(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at System.Windows.Threading.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority, System.Delegate, System.Object)
at System.Windows.Interop.HwndSource.OnPreprocessMessageThunk(System.Windows.Interop.MSG ByRef, Boolean ByRef)
at System.Windows.Interop.ComponentDispatcherThread.RaiseThreadMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.TranslateAndDispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()

Hi Scott,
Thank you very much.. Now I am able to run wizard.. but at the end of wizard step I am getting below error
[Info] [1/23/2014 5:48:47 PM]: Endpoint=sb://MSPAPPS.psu.edu.sa/WorkflowDefaultNamespace;StsEndpoint=https://MSPAPPS.psu.edu.sa:9355/WorkflowDefaultNamespace;RuntimePort=9354;ManagementPort=9355
[Info] [1/23/2014 5:48:47 PM]: Processing completed
[Verbose] [1/23/2014 5:48:47 PM]: Validating input and configuration parameters.
[Verbose] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
[Progress] [1/23/2014 5:48:49 PM]: Installing auto-generated certificate.
[Verbose] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
[Progress] [1/23/2014 5:48:51 PM]: Granting 'Log on as Service' privilege to the RunAs account.
[Verbose] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
[Progress] [1/23/2014 5:48:52 PM]: Workflow Manager configuration starting.
[Verbose] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
[Progress] [1/23/2014 5:48:55 PM]: Configuring Workflow Manager runtime settings.
[Error] [1/23/2014 5:48:55 PM]: System.Management.Automation.CmdletInvocationException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned
message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.UnauthorizedAccessException: The token provider was unable to provide a security token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'.
Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.IdentityModel.Tokens.SecurityTokenException: The token provider was unable to provide a security
token while accessing 'https://mspapps.psu.edu.sa:9355/WorkflowDefaultNamespace/$STS/Windows/'. Token provider returned message: 'The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.'. ---> System.Net.WebException:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.TokenProviderHelper.ThrowException(Uri requestUri, WebException exception)
at Microsoft.ServiceBus.TokenProviderHelper.GetWindowsAccessTokenCore(IEnumerator`1 stsUris, Func`2 uriBuilder, String requestToken, TimeSpan timeout, DateTime& expiresIn)
at Microsoft.ServiceBus.WindowsTokenProvider.OnBeginGetWebToken(String appliesTo, String action, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.GetWebTokenAsyncResult..ctor(TokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProvider.BeginGetWebToken(String appliesTo, String action, Boolean bypassCache, TimeSpan timeout, AsyncCallback callback, Object state)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingWebToken(ITokenProvider tokenProvider, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.HttpWebRequestExtensions.AddAuthorizationHeader(HttpWebRequest request, ITokenProvider tokenProvider, Uri baseAddress, String action)
at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.<GetAsyncSteps>d__11.MoveNext()
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.NamespaceManager.OnEndTopicExists(IAsyncResult result)
at Microsoft.ServiceBus.NamespaceManager.TopicExists(String path)
at Microsoft.Workflow.Deployment.Commands.WorkflowServiceConfigHelper.SetWFRuntimeSettings(String resourceDBConnectionString, String config)
at Microsoft.Workflow.Deployment.Commands.AddWFHost.CallWFRuntimeSettings(Service wfserviceInfo, String unencryptedResourceConnectionString)
--- End of inner exception stack trace ---
at System.Management.Automation.PowerShell.EndInvoke(IAsyncResult asyncResult)
at Microsoft.Workflow.Deployment.ConfigWizard.CommandletHelper.InvokePowershell(Command command, Action`3 updateProgress)
at Microsoft.Workflow.Deployment.ConfigWizard.ProgressPageViewModel.AddWFNode(FarmCreationModel model, Boolean isFirstCommand)

I can install, but not run, firefox 4 on windows 7 fire edition. can you help?

.....

I use XP not Windows 7, but the current user and the administrator may be subtly different. I do not use Windows 7 and can not advise but just be aware you may not necessarily see the top level administrator account easily (See for instance ---> [http://technet.microsoft.com/en-us/library/dd744293%28WS.10%29.aspx MS link] : <-- clickable link --- ''"Enable and Disable the Built-in Administrator Account"'' )
I am not certain I understand what a ''fire edition'' is, unless this is a reference to Firefox 4.
I would not expect that you would normally need a password run or use the browser Firefox 4, although you probably need a login name and a password to login to and start using your Operating System account in Windows 7. Obviously you can not start Firefox without using an Operating System - such as Windows 7. You may need a password and a login to make full use of this current forum, the Firefox Support messageboard.
Presumably at the moment you are using Internet Explorer 8, as your browser.
Have you tried reading the linked articles I mentioned in my first post, the light blue text are links, and should open ok with Internet Explorer.

ITunes.exe - Entry Point Not Found itunes will install but wont run!!!!!!!!

I updated itunes and it wont work. i unistalled all apple apps, about 5 to 10 times. i get this message on my HP 530,32 bit windows vista. At the top in the error window it says
*iTunes.exe - Entry Point Not Found* Then under that in the error box it says:
*The procedure entry point*
*QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll.*
What do i DO PLEASE HELP ME OUT!!!!!!!!

I found the qtcf.dll file in the sys32 moved it to the desktop tried iTunes and still same error message as above.
Okay ... sometimes there can be multiple copies of them lurking about on a PC.
Try heading into Computer, and typing QTCF.dll in your Search field. When Vista tells you it can't find the file, click "advanced" and tick the "Search hidden, non-indexed and system files (might be slow)" and then start another search.
This search *will indeed be slow.* Wait until the green progress bar up at the top of the screen has completely vanished, otherwise you might accidentally stop the search too soon.
What copies of QTCF.dll do you find, and where are their file locations? (The default location on a 32-bit Vista PC is in C:\Program Files\QuickTime\QTSystem\QTCF.dll)

Adobe Flash Player 10 installed but not running

I installed Adobe Flash Player 10 from the adobe site, and it said that it installed successfully, but when I try to watch videos on facebook or youtube it says I need to download flash player. I tried installing it again, but the install window just popped up again and said it was already installed. I restarted my computer several times, but flash player still won't run. I need help please!!!!

Hi, ok. I'll give you the instructions that you need to follow. Now McAfee must be Disabled otherwise it will block the Install of that Shockwave Flash Object. In addition to Disabling it, you will have to check it at certain steps in the process, since it will re-enable itself and block the Install.
First, some pre-Un/In steps to take. Go to Tools, Internet Options and make sure Security is set to Medium for the Internet Zone. You can do this now. Next, take a look in the system tray and know how to disable any applications that use Flash(messenger services, etc.)
Download the Uninstaller and SAVE it to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Download the Flash Player Installer for Internet Explorer and SAVE it to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
Disable any apps in system tray that would use Flash
Disable McAfee
Close all browsers, you'll just be looking at the Desktop
RUN the Uninstaller. When it is finished, Reboot(restart) your computer. Allow it to fully Reboot. Then check McAfee for all of the components that you Disabled to make sure it did not re-enable. Then Reboot again(to clear out old files) Then check McAfee again.(If McAfee has re-enabled either time you check, then Disable as you did before)
When fully Rebooted, RUN the Installer for Internet Explorer. Reboot Once.
Now Re-enable your McAfee if needed; since it may have already re-enabled after that Reboot..
You may want to print this out so it will be easier to follow. When you are finished, go to the test site and post back the results.
Then go to the add ons and see if the Shockwave Flash Object is now Installed and Enabled.
Let me know if you have any questions.
eidnolb

Otf fonds are installed, but not recognized by Windows XP

I moved InDesign CS3 to a now notebook (Dell Latitude E6500).
After a quiet installation, everything looked ok at first glance.
When opening a document which I worked on yesterday on the old Notebook (Dell Latitude D800, 4 years old), the Myriad Pro font was missing.
In the Windows fonts directory, the files are there.
Doubleclicking on such a font brings an errormessage
C:\Windows\Fonts\MyriadPro-Semiboldit.otf was not a valid font.
InSDesign CS3 V5.0.4 does not list that fonts.
all other fonts are listed and are working.
I tried something like installing fonts manually, reinstalling InDesign, install the latest graphicdriver but nothing helped.
Currently I am unable to work with Indesign on that notebook.

The problem is solved now.
On installing Linotype fonts I had the same problem,
so it could not be on Adobes side.
Finally it turned out that Dell's graphic drivers for that notebook are malfunctioning.
Interestingly I found this information on a user forum at Dell's homepage. That entry was more than 4 weeks old but Dell still allows you to download just one graphicdriver which is not working properly.
Maybe others have the same problem, they should download the driver 178.08 from the website www.laptopvideo2go.com.
Gerhard Sachs

Photoshop Elements 6 will install but not open

I have tried to install Photoshop Elements 6 several times. After what appears to be a successful install, the program will not open. When I go to log off my computer I get a message that Photoshop Elements is still running and my computer is unable to end the program . Under the task manager it shows no applications running but Photoshop Elements shows up in a few places under the Processes tab. This install is directly from the program cd. Any ideas?

First, you may need to install the Adobe licensing-service update:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice
If that doesn't help, try Adobe's generic troubleshooting steps, which include installing with anti-virus disabled and running as administrator:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#Try_Adobes_generic_troub leshooting

Adobe Photoshop CS3 Extended installed but not working

Adobe Photoshop CS3 Extended was added to my computer when I bought it in Thailand.
Now (I am no longer in Thailand) I want to use it but I can't seem to open/do anything.
Even when asking for help with the 'Help' button it states that "There was an error in initializing the Adobe Help application. You may need to re-install the applicaiton and the Help componen".
How do I do this? Or am I missing something?
Thanks in advance for the help!
Eline

Haha... I like the honesty!
I was in bad need for a computer and went to one of those fancy, big shopping malls recommended to me by a couple of friends. I didn't even know I had Adobe Photoshop until today. I am not sure I really got screwed or things just work differently. The computer is a little strange... (I can write in Thai สกร่ฟส กส่ฟกส า่ฟส ่ if I would like to) but so far it's ben okay.
Anyways, what would you suggest I do Mylenium?

A505-S6980 will boot but not go to Windows 7

Hi --
I bought a new Toshiba laptop and gave my previous laptop (A505-S6980) to one of my high school students who could not afford one. He has to do an online course that must be finished by May 27th, in order to graduate. It was working fine but now has an issue. Is there anything I can do to fix this problem:
1. The A505 will boot. Shows Toshiba logo screen with options to press F2 (setup) and F12 (boot).
2. It will then go to "Starting Windows 7" screen, and white bar shows loading.
3. After that, it will go to next screen that shows Microsoft logo at bottom, along with a black/green loading bar. Green "blip" glides back and forth as if loading.
4. The next screen is completely blank, with a cursor blinking at the top. It will also show the pointer. That's as far as it goes. The processor light and the sound it makes both appear to be repititive, as if the processor is caught in a loop.
Please Help! The computer is only a little over a year old. This kid is trying so hard to make his graduation happen, and he has no computer at home. He's using it on weekends and in the evenings to do the online thing, and goes to Starbucks and other "hot spots" to get online.
Thanks! Tere

If you're determined to try to resurrect this installation of Windows, download a disc that enables you to reach the Windows Recovery Enironment.
Download Windows 7 System Recovery Discs
You need the 64-bit one.
Note that you should have burned this disc from Windows 7. If you have access to another computer with 64-bit Windows 7, you can make it this way.
Create a system repair disc
-Jerry

Reader will install but not open in XP

It worked two days ago. Now I get an error message saying it has encountered a problem and needs to close. I have already tried the following.
1) Un-installed all Adobe programs
2) Deleted all Adobe program files
3) Increased virtual memory
4) Re-installed reader
Help!

I have had the same thing happen to me, as well! I have spent so much time on this and it is so frustrating! There are many other forums on the web with other frustrated customers/clients using different versions of Windows / AV and the same problem. I am using Windows 7, downloaded Adobe Reader X. The program installed fine. When I download pdfs from email, and then open them in Adobe X, everything is "a-okay." However, when I save a document from the internet and then download it from windows 7 (same procedure), I get the error message that the file is corrupted or damaged. EVERY SINGLE FILE FROM SEVERAL DIFFERENT STATE OR LEGAL WEBSITES that, also, previously opened fine in prior version of Adobe Reader. I have uninstalled, reinstalled, "repaired," uninstalled again with Norton & Window AV off and installed again ... still no luck. I depend on this Reader EVERYDAY!! I have seen numerous threads with this, BUT no solutions!! Please help!

Weird problem with my GPU being installed but not used by windows.

I have a problem with my graphics card.
I have an integrated Intel HD Graphics gpu, that Windows recognised and installed the driver thereof.
The problem is, Windows doesn't use this gpu, but uses his own Microsoft Basic Display Adapter.
I'll provide some screenshots here:
http://i.imgur.com/ncKoU3g.png
http://i.imgur.com/XkeMWL3.png
http://i.imgur.com/m31Wo5h.png
http://i.imgur.com/kSlpUvY.png
http://i.imgur.com/atMh00p.png
Ps: Don't answer with the reply of "Have you updated your drivers yet", because I've done that over a thousand times already.
Thanks in advance!

Is there any solution for the above query. I called HP customer care. But it seems that they accept calls only on weekdays.

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
Post relates to: HP TouchPad (WiFi)

@MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

CS3 will install, but not run in Windows 7 64bit

Similar Messages

Maybe you are looking for