CS3 will not insert a record
I am having many problems with CS3, the latest is that I
cannot get it to insert a record using aspvb.
I have reduced the page down to one field so it should be
straight forward.
On insert the page refreshes but does not go to the next page
and the record is not inserted.
I have checked the connection and thats OK
Cant think of what elso to do.
Any ideas pleas?
Thank you, John
Preference deletion worked. Apparently Photoshop got all confused.
On a Mac, hold down Command, Option, Shift while starting Photoshop. On a PC I think it is CTRL-ALT-Shift.
Similar Messages
-
CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.
CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.
Old_Timer I would recommend reviewing your install logs to determine the exact error message. You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.
-
Adobe Premiere CS3 will not open!
Adobe premiere CS3 will not open. When I click on the Adobe icon on my desktop, I get this message: This application has failed to start because prm.dll was not found. I've tried several things such as: uninstalling the program then reinstalliing it. I tried to open Adobe by clicking on one of my projects by opening MY Computer from start on the taskbar, then click on c drive, etc. but it will not open. Before I started getting the error message stated above, when I clicked on the icon, the program would load to the point of showing the top portion of the page (file, edit, etc.) then stop. It would never fully load. HELP!!!!! I'm in the middle of trying to meet several deadlines.
First, search your system for every instance of prm.dll. See if you have one (could be corrupt, but a Repair Install should have repaired it) in your PrPro CS3 folder hierarchy. Do you have any more? How do the dates and sizes compare to the one, if there is one, in PrPro? Here is a LINK to a .dll site. I do not know this site, so cannot even comment on their .dll's. I'd do the first suggestion, well - first.
Also, I do not know this .dll. It could be a VST from an Audio editing program, or similar. Some of these have been known to bring PrPro to its knees, at launch. Might be worthwhile to check into it a bit more.
Also, take a look at Event Viewer. This ARTICLE will give you some tips on what to look for. Could be more happening, than the error message might lead one to believe.
Good luck,
Hunt -
I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.
May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers. -
Photoshop CC with CS3 will not open Nikon NEF files for the D610.[was:CC]
Photoshop CC with CS3 will not open Nikon NEF files for the D610. Is there a fix for this? Fast Eddy
I assume you're running Photoshop CC (not sure what you mean by "with CS3" unless that's the version you upgraded to CC from)
Download Camera Raw 8.3RC
http://labs.adobe.com/technologies/cameraraw8-3-cc/?tabID=details#tabTop -
SQLJ classes (Will not insert result into table)
/*@lineinfo:filename=SqljCircle*//*@lineinfo:user-code*//*@lineinfo:1^1*/import java.sql.SQLException ;
import oracle.sqlj.runtime.Oracle;
// iterator for the select
/*@lineinfo:generated-code*//*@lineinfo:5^1*/
// SQLJ iterator declaration:
class myIter
extends sqlj.runtime.ref.ResultSetIterImpl
implements sqlj.runtime.NamedIterator
public myIter(sqlj.runtime.profile.RTResultSet resultSet)
throws java.sql.SQLException
super(resultSet);
RadiusNdx = findColumn("Radius");
public int Radius()
throws java.sql.SQLException
return resultSet.getIntNoNull(RadiusNdx);
private int RadiusNdx;
/*@lineinfo:user-code*//*@lineinfo:5^33*/
class SqljCircle
//Main method
public static void main (String args[])
try {
// set the default connection to the URL, user, and password
// specified in your connect.properties file
Oracle.connect(SqljCircle.class, "connect.properties");
SqljCircle ti = new SqljCircle();
ti.runExample();
} catch (SQLException e) {
System.err.println("Error running the example: " + e);
} //End of method main
//Method that runs the example
void runExample() throws SQLException
myIter iter;
/*@lineinfo:generated-code*//*@lineinfo:28^1*/
// #sql iter = { select radius from RADIUS_VALS };
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, SqljCircle_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
iter = new myIter(__sJT_result);
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:28^45*/
while (iter.next()) {
// To see the radius values:
System.out.println(iter.Radius());
int radInput = iter.Radius();
double result=area(radInput);
// To see the result values:
System.out.println(result);
/*@lineinfo:generated-code*//*@lineinfo:38^1*/
//#sql { insert into RADIUS_VALS values(:radInput,:result) };
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
int __sJT_1 = radInput;
double __sJT_2 = result;
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, SqljCircle_SJProfileKeys.getKey(0), 1);
try
__sJT_stmt.setInt(1, __sJT_1);
__sJT_stmt.setDouble(2, __sJT_2);
__sJT_execCtx.executeUpdate();
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:38^51*/
/*@lineinfo:generated-code*//*@lineinfo:39^1*/
//#sql { commit };
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, SqljCircle_SJProfileKeys.getKey(0), 2);
try
__sJT_execCtx.executeUpdate();
finally
__sJT_execCtx.releaseStatement();
/*@lineinfo:user-code*//*@lineinfo:39^13*/
iter.close();
// Utility function to calculate the area
public static double area (int rad) {
double pi=3.1415926;
double areacircle=pi*rad*rad;
return areacircle;
}/*@lineinfo:generated-code*/class SqljCircle_SJProfileKeys
private static SqljCircle_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new SqljCircle_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClassT(getClass());
private java.lang.Object[] keys;
private SqljCircle_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "SqljCircle_SJProfile0");
This SQLJ class compiles and runs ok, it retrieves a number from a table in my database, computes the result and prints them both out but it will not insert the result back into a table in my database, WHY????
Philip.Thanks a million to all of you, the final working code;
Zed
<%
String name = request.getParameter("name");
String connectionURL = "jdbc:mysql://localhost:3306/";
String dbName = "test";
String userName = "root";
String password = "";
Connection connection = null;
PreparedStatement pstatement = null;
Class.forName("com.mysql.jdbc.Driver").newInstance();
try {
connection = DriverManager.getConnection(connectionURL+dbName,userName,password);
String queryString = "INSERT INTO employees(id, name) VALUES (id, " + "'" + name + "'" + ")";
pstatement = connection.prepareStatement(queryString);
pstatement.executeUpdate(queryString);
catch (Exception ex) {
out.println("Error = " + ex.toString());
pstatement.close();
connection.close();
%> -
WinXPsp3 - Dell GX620 1 GB Ram - InDesign CS3 v5.0.4
Welcome window - starting up, executing, Initializing, Completing
Then Error window
Adobe InDesign CS3: InDesign.exe - Bad Image
The application or DLL C:\Program Files\Adobe\Adobe InDesign CS3\Plug-ins\DICTIONARIES\LILO\LILO.APLN is not a valid Windows image. Please check this against your installation diskette.
CS3 has worked for 2 years so why and how to fix.
Thankyou J.I did a system restore on my system (Windows XP Pro) and cannot open Indesign CS3. When I tried the following error message appeared:
"The licensing subsystem has failed catastrophically. You must reinstall or call customer support."
I tried some of the suggestions here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402004
Indesign CS3 will not open so I cannot deactivate. The instructions say if you have an entire Suite installed, then you only need to deactivate from one application. But I cannot find deactivate anywhere in the other apps. Without deactivating, I cannot uninstall to reinstall.
There was no FLEXnet Licensing Service showing in services.
I tried renaming the FlexNet folder.
tried moving the cache.db file.
After trying these suggestions I now get the error:
"You cannot use this product at this time. You must repair the problem by uninstalling and then reinstall this product or contact Adobe customer support for help."
What next? -
My Bridge CS3 will not install on my new Intel duo core iMac. It worked on my earlier iMac, but when PhotoshopCS3 was moved and installed on the new one, Bridge was nowhere to be seen. I have repaired permisisons, reinstalled PS CS3, and looked for Internet advice.
I would really like to continue to have the Bridge in the CS3.
Am I going to have to rely on my new Lightroom Developer for its Camera RAW functions and for renaming my files? I liked the Bridge RAW converter very much. The old Bridge is still on my machine, but its renaming functions don't suit me at all, and for some reason it is refusing to open my non-RAW files.I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be. I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be. This is just my own personal opinion and practice based on my own observations.
Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise. Note that this suggestion begins with "I still advocate…", not "Apple recommends…".
Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
==== Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night. If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388 Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large. Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE: There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject. Other, more reliable reports indicate that this seems to have been fixed in the current version of Leopard.
In any event, Repairing Permissions and/or running the Cron Scripts cannot hurt.
If you have DiskWarrior, run it regularly too. It can't hurt either, and it often improves stability and performance. -
After years of using Flash CS3 on our Windows 7 computer, it would not launch. So we did a system recovery -(everted to factory image), re-installed Windows and updates, installed Flash CS3, then successfully did the license verification. But Flash CS3 will not launch.
We copied the Flash Icon from the Start Menu to the TaskBar. This is the icon we clicked on to do license verification, but now we can't use it to launch Flash CS3.
Thanks for any ideas.
Computer specs:
HP - Pavilion Elite Desktop
AMD Phenom™ II Processor
8GB Memory
1TB Hard Drive
Model: HPE-210y
Window 7 with Service Pack 1; all updates applied as of 10/26/2014
(I realize Flash CS3 is not meant to work on Win 7, but it has for years on this computer and on a Toshiba laptop, also with AMD processor)Well I decided to reinstall OSX to see if that would help,
and that seemed to fix it. I'm still not sure what the problem was,
but a fresh install seemes to have fixed it :] -
I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!
You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry. -
InDesign CS3 will not print in OS X
I updated my iMac to OS X 10.9.2 and now my InDesign CS3 will not print. Help please!
Here are a couple threads on the subject:
http://forums.adobe.com/thread/1351394
http://forums.adobe.com/message/5961018
http://forums.adobe.com/message/5909935 -
Working with Dreamweaver and Flash software. Using a template, couldn't get flv videos to insert correctly, got a white blank box at the tested website. Finally downloaded widget as a solution, now widget will not insert. It appears on the insert menu, I put the cursor in the insertion point and click on widget, and nothing happens. I don't get the pop up widget box, I get nothing. At my wits end. Please help. Working on thesis project and deadline coming up soon.
After I posted, I noticed a similar post below. Couldn't reinstall Dreamweaver as I have a thesis project I've been working on for awhile stored there. Saw the fix to go to preferences and general and the problem was on the unchecked box to show dialog upon insertion. Once I checked that box, the widget pop up worked. Can't believe I have spent hours of wasted valuable time trying to figure this out. Thanks!
-
Insert statement does not insert all records from a partitioned table
Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS -
Adobe Photoshop CS3 will not run
I reloaded my windows xp 2005 (?) and tried to load my CS3 software. It will not even run. It has been suggested that the software can only be reloaded a certain number of times. I have reloaded this software 3-4 (?) times over the years. Is this the problem or is is something else?
Don't think there is a number of times you can re-install your program. You can only have 2 activated copies, so if you move to a different machine and don't deactivate on the old one it is still considered an activated copy.
But why would you uninstall and re-install your copy? THis rarely solves problems, espeically if you do not run the Adobe Script Cleaner. Also, the preference file is unchanged on a reinstall, so if there were errors in it before, they are still there. -
Premiere Pro CS4 (Windows 7) will not (Capture or Record) connect with DV Cass Recorder
For 12 yrs I've Never had a problem w Adobe Prem Pro seeing my Panasonic AG-DV2000, DV cassette Recorder. Premiere Pro CS4 (with Windows 7 Ultimate) will not connect (Capture or Record)with my DV Cassette Recorder - Panasonic AG-DV2000. I upgraded my computer to below components & added Windows 7 at same time. Have had Adobe Prem Pro CS4 since fall with no problems. I usually have 2 - 5 videos, with 2 - 4 audios, going at same time on my timeline. (These digital videos & audios I shot myself professionally with mini DV cassettes.) Most projects are between 10 to 50 mins on timeline, w transitions or crossfades between video & audios. Firewire attached from computer to Panasonic. No Capture card in new system, not needed, use to watch over an external TV, now watch over a second monitor or in program monitor. [Am I just missing a simple setting??] Computer below & settings: very up to date.
motherboard ASUS P6T
CPU i 7 2.67 GHz
RAM 6 GB
video ATI Radion HD 5700 1 gig Memory OpenGL 3.2
Main Drive 500g SATA 7200 rpm
Raid Drive 1.2 TB 7200 SATA
Windows 7 64 Bit Ultimate
DVD/CD writable Disc Drive
AVG Antivirus 9.0
Playback Settings
Realtime Playback
yes Desktop Video Display
External Device DV 25 720X 576i
Aspect Ratio Conv Hardware
yes External Device Audio
Export External Device DV 25 720X 576i
yes Disable Video output when in background.
24p Conversion Method - Interlaced frame 2:3:3:2
Preferences (only things not set at default)
Audio Output Mapping -- Premiere Pro WDM Sound (have also tried Audio Out)
Device Control DV/HDV Device Cont Options: NTSC, Panasonic, AG-DV2000P, Auto Detect
(Check Status) Says it is ONLINE
Media Cache files saved to My Raid drive not C drive (so they will run faster)
Indeterminate Media Timebase: 29.97 fps Non Drop Frame
Project Settings Video -- Timecode Audio -- Audio Samples
Capture Format (tried both) DV & HDV (all settings checked for during preview & capture)
Under DV says Panasonic is Online, export to tape/it renders/Premiere controls the Panasonic recorder -looks like it's recording, but see no video - hear the sound. On Playback nothing was recorded? ( And Can't capture from tape to computer)
Under HDV Says Panasonic is Offline, but computer able to control the Panasonic start/stop, but doesn't record or capture tape to computer?
[ I think this DV/HDV part is correct...... it's getting very confusing at this point??!! Your help is appreciated Thank YOU ]http://www.studio1productions.com/Articles/Firewire-1.htm
Above article HELPED me -- and is working fine!!
Was an Easy fix, took less than 2 mins.
After a 2 1/2 month ordeal.
Info from the "forum help group" through adobe. jk
Maybe you are looking for
-
Oracle North American Payroll Customers - US Q2 Statutory Updates Released
Dear Oracle North American Payroll Customer, The United States (US) Second Quarter Statutory Update (Q2), 2006 has been released! The following patches are available: R11i: 4938760 R11: 4938760 Please be sure to carefully read ALL the readmes before
-
Java script error when using a "Table" component (jsc2)
using a table component, I get a js errors, when lodiing the HTML page, sorting rows etc. can some one helpe me or can some one have the same problem ?
-
Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?
Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small r
-
Lion Server setup & Time Capsule
Greetings, I am new to lion server so please bear with me. Some of my question me seem dumb to some of you. But to me the only dumb question is one not asked. So please bear with me. Server and time capsule will both do NAT, DHCP. Which should I use
-
X201i - external display flickers
I've had this problem since the first day I got it. I don't think it's my monitor's problem since it's the same situation on two different displays. I'm running windows XP. Today I decided I can't live with it. I've tried everything I got from online