CS3 will not print color pictures

Photo Shop will not print color pictures. It printed fine for over a year then just quit printing in color a few months ago.  A work around was given by our Higher head Quarters but when printing this way the pictures do not print properly and the pictures can't be adjusted or modified any.  
Machines having this problem are running Windows XP. 
What are the proper setting for this program? 
Do I need a software update?

Check the updater and make sure you installed the updates for Photoshop CS3.
But most likely this is a configuration issue with your printer driver.
Many drivers do have settings that force black and white printing, overriding what the application sends to the driver.

Similar Messages

  • HP 6310 WILL NOT PRINT COLOR PICTURES

    MY 6310 ALL-IN-ONE PRINTER WILL ONLY PRINT BLACK AND WHITE PICTURES WHEN COMMANDED FROM MY HP DESKTOP {VISTA}. THE SAME PRINTER WILL PRINT COLOR IMAGES WHEN COMMANDED FROM MY HP LAPTOP {WINDOWS 7}. A COMPARASION OF THE PRINTER PREFERENCES FOR BOTH COMPUTERS ARE IDENTICAL. THE LAPTOP IS CONNECTED WIRELESSLY WHILE DESKTOP HAS A USB CONNECTION TO THE ROUTER.

    Try cleaning the color cartridge, see this HP link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • InDesign CS3 will not print in OS X

    I updated my iMac to OS X 10.9.2 and now my InDesign CS3 will not print.  Help please!

    Here are a couple threads on the subject:
    http://forums.adobe.com/thread/1351394
    http://forums.adobe.com/message/5961018
    http://forums.adobe.com/message/5909935

  • HP Officejet 6500 e709 will not print color from my Mac

    My HP Officejet 6500 e709 will not print color from my Mac. I have run test print from the printer and it prints fine.  I have installed new cartriges and run a test page and all is good. the print comad from the mac only prints black

    Hi @bvedder ,
    Thank you for visiting the HP Support Forums and Welcome. Thank you for the detailed message, tells me where to look for a solution for you. I have looked into your issue with the HP Officejet 6500 E709 Printer and not able to print in color with your Mac.
    Here is a document that will show you how to change your Print settings on the Mac. Go to the section Solution four: Check the print settings. Then select the Mac. The Quality should be Normal or Best.
    Hope this helps you print in color.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My  Macbook Pro will not print color to my HP B209 Printer, only black and white...

    My Macbook Pro Yosemite will not print color to my HP B202 printer, only black and white.  Help!

    Hi ..
    Try a reset > Mac OS X: How to reset the printing system

  • Hp 5440 will not print color

    My son sent me his hp 5440 inkjet printer.  I have windows xp.  I downloaded the drivers from HP and installed on my computer, but the printer will not print color.  I have checked and made sure that grayscale in unchecked in the printer properties. Ink levels show about 3/4 for the black and about 2/3 for the tri-color.   Any advice on what is wrong and how to fix it.. Any help is greatly appreciated...

    Try cleaning the color cartridge, see this HP link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • TS3147 Our printer will not print color

    Our printer Hp940c will not print in color

    Cartridge Out Override can be enabled from the Control Panel menu of the HP Color LaserJet CM2320 Printer, as follows:
    1. Press OK to open the menus.
    2. Press the left arrow ( < or right arrow ( > ) button to navigate to System Setup , and then press OK .
    3. Press the left arrow ( < ) or right arrow > ) button to navigate to Print Quality , and then press OK .
    4. Press the left arrow ( < )or right arrow ( > button to navigate to Replace Supplies sub-menu, and then press OK .
    5. Press the left arrow ( < or right arrow ( > button to navigate to Override at Out option, and then press OK to enable the Override feature or select Stop at out to disable the Override feature.
    6. Press X to exit the menus.
    If Stop at out is selected, the printer will stop printing when a cartridge reaches the recommended replacement point. If Override out is selected, the printer will continue printing when a cartridge reaches the recommended replacement point. The factory default setting is Stop at out .

  • Pages 5.1 - Kodak Printer will not print color

    Anyone having problems printing color after Pages 5.1?  I have a Kodak ESP 7250 and the printer option is strikes through and I can not print color.  Printer works fine with older version of Pages on macbook.
    iMac Late 2012 Mavericks OS

    Wonder who handles Kodak these days?
    Peter

  • HP C309a Alignment Fails and Will Not Print Color

    Hello,
      My C309a has had very light (infrequent) usage. It simply will not pass alignment or print in color. Could these two problems be related? I do like this printer as it does print on printable CDs/DVDs and as far as I know there are no AIOs on the market that do this. Would anyone please help?
    Best Regards,
    Startoker

    According to this page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02435884&cc=us&dlc=en&lc=en
    new or old 564/564XL should all work on older printers (printheads) made before September 2010. Maybe the printhead is for newer models? and the new cartridges have an older date? Anyway, check the date on the cartridges, if the date is later than 9/2010, they should work, and I would suggest you return the printhead if no color is printed. If the dates on the cartridges are older than 9/2010, maybe the printhead is for newer model, I would try get newer cartridges or have them replace with the correct printhead.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • InDesign, Acrobat CS3 will not print.

    Help! Neither InDesign CS3 nor Acrobat 8 will print at all from my G5 PPC to a Canon 9000
    Acrobat never has, but InDesign did until recently. Incidentally, InDesign CS2 does print, though it can't open CS3 documents.
    All other CS3 programs print properly, and Preview will print the Acrobat docs.
    Print monitor says it is printing with shimmering progress bar but no output.
          N1cck

    Hello Nick.
    Apologies if the following sounds a bit basic, but perhaps the printer is struggling with too much data. In the Print dialogue window, choose 'Graphics' and try these settings:
    Images - Send Data: Optimised Subsampling
    Fonts - Download: Subset
    PostScript: (choose Level 2 or 3 to match your printer's driver/RIP)
    Data Format: Binary
    Or try printing one page at a time. No harm in trying.
    Alistair

  • With large files Illustrator CS3 will not generate preview-picture, why?

    When Illustratorfiles (size from 8 meg and up) are saved as saved as eps-files the program gives a warning that it can not create a tiff-file as preview fot the file.
    If I save the files as Illustrator 8 open in in 8 and saved there is not problem. (Exept that the test is taken down into a number of bits).
    Why can't I get a preview-picture? What can I do to solve in in CS3?
    Jonas Dagson

    It's a memory issue. If you scale your artwork down (say, to 50%), then save, it should work (it can be scaled up in the page layout software). If you're using raster effects you'll have to make sure they scale as well and that your raster effects resolution is appropriate for the final output size.

  • In Design CS3 will not print landscape

    I cannot get the print dialogue box to print in landscape even though landscape is highlighted. Any thoughts?

    Check the updater and make sure you installed the updates for Photoshop CS3.
    But most likely this is a configuration issue with your printer driver.
    Many drivers do have settings that force black and white printing, overriding what the application sends to the driver.

  • HP Envy 5660 Will Not Print in Color from Desktop

    I have a new Envy 5660  e all in one printer. Prints in color from my I phone and I pad but will only print in black from desktop running OSX 10.6.8.  No error messages just will not print color from my Mac. 

    Hello @zeitman , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're having issues printing color. I would like to try and assist.
    Due to system limitations, the printer requires a minimum of 10.7 to be installed.  You can, however, download and install the Mac print software relating to HP.  This should allow you to have functionality:
    HP Printer Drivers v3.0 for OS X
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hp all in one 6480 Will print text but will not print pictues

    I can not determine why the printer will not print a picture but will print documents.  It comes back paper jam but there is no paper jam.

    Nobody? This has to be a simple fix, but I can't figure it out!

  • HP Photosmart 7525 not printing color correctly

    HP Photosmart 7525 will not print color from any application.
    Operating system: Windows 7 Home Premium.
    Grayscale is not on.
    Tried printing with discolored background correction
    Tried each of the color management options separately from discolored background correction and combined with it.
    Replaced the ink, and the result was worse!
    The quality report shows no color ink whatsoever, and from the display, it looks like the printer believes it has no color ink left.

    Attempted to clean cartridges and align the printer through the display pad: no luck.

Maybe you are looking for

  • Create TOC from bookmarks without underlines in bookmark names?

    Here's the situation. I have added bookmarks to my topic files for the headings that I want to appear in the table of contents. I do an auto create of the TOC and the bookmarks appear in the table of contents. However, they have underlines in the tex

  • Is abap thread safe? Some question in Singleton pattern in ABAP

    Hi Grus, I have a very basic question but really make me headache... Recently I am learning the design pattern in ABAP and as you know in JAVA there is a key word "Synchronized" to keep thread safe. But in ABAP, I didn't find any key words like that.

  • How can I test the SCORM 2004 compliant based output from captivate

    Hi everyone, I have created a SCORM 2004 compliant based output file from Captivate itself. Before sharing it with client, I want to check that whether it is compliant or not. Is there any tool to check the compliance check in LMS? I am new to this,

  • Re: KONP table

    Hi I have a question regarding the KONP table in SD which stores condition records. In the condition record, we have stored the Sales TAX as 6.5%.  However in KONP table it is showing up as 65%. When i create a Sales Order it is applying the tax corr

  • Standard Application

    i want to know is their any standard application for business partner if so do list them ?