CS3 with Codec MainConcept DVCPro HD CODEC v7 7 0 23862 rar - can't import AVCHD (m2ts files)

Hi,
I have a Panasonic hdc-sd9 and just looking for a programm with which I can import the AVCHD (m2ts files).
I saw here( http://www.videoaktiv.de/200805171688/News/Camcorder/Panasonic-Broadcast-AVCHD-goes-profes sional.html ) that Adobe Premiere Pro CS3 with the Codec MainConcept DVCPro HD CODEC should work for the Panasonic File Format.
I have saved one video as a mpg file. I imported it to Premiere Pro CS3. I could import the mpg File but I had not audio sound in Premiere Pro CS3, but the mpg movie, for example when I start the movie in Windows Media Player or VLC there is sound.
Somebody can help me or provide me another programm which work?
Do somebody have the same problem ?
Thanks
Cheers
Flo

Hi Harm,
Thanks for the answer.
But can an mpg File have 5.1 sorrund sound ? Is this not yet Stereo ?
This is one of the problems...
Do you maybe have an idea regarding the importing problem with the m2ts file too ?
Thanks a lot
cheers
Flo

Similar Messages

Can I import .cda audio file in iTunes on my Macbook Pro with OS X Yosemite

Can I import .cda audio file in iTunes on my Macbook Pro with OS X Yosemite

iNads,
.CDA files are simple index files, less than 1 kB in size, that do not contain any audio. There is no reason to import them.
If you have the physical CD and wish to rip it into iTunes, you can import it per this guide: iTunes 12 for Mac: Import songs from CDs

Can I import Sony .mts files with seperate audio layer into AE?

I can import .mts files from my Sony SR11 OK but the audio is in the same layer as the video content.
When I go to Edit/Edit in Adobe Audition and Audition opens Audition reports in details box, "Error:File not supported by any currently registered plug-ins."
The Audition Audio Plug-in Manager shows no available plug-ins.
Can I import the .mts file as seperate layers as one can with Premiere Pro? Alteratively perhaps, what plug-ins should I look for to add to Audition?

AE doesn't separate audio. You'll have to do it elsewhere, possibly in Premiere Pro or tools like ffmpeg/MPEGStreamclip. It's odd, though. since these components are the same in all the suite apps, a file that works in AE should just the same open in AU (without showing teh video in teh worst case). .mts is just MPEG2 or AVCHD in disguise, anyway, which the apps should open without a hitch - if it's not out of spec. I'd look into your camera settings, though. maybe you recorded to the wrong channels or an odd audio sampel rate and it's messing things up.
Mylenium

How can I import a pdf file into numbers so it will open with a click

How can I import a pdf file into a spreadsheet so that it will open with a click?

You can link to a webpage or an email in Numbers-- that's it.
The best way I found to do this is to enable websharing on your machine (see this article if you are running 10.8: http://lowendmac.com/crews/12lc/web-sharing-mountain-lion.html)
You can then place your pdf files in the folder /Users/<your user name>/Sites/<somefolder>
Then link to this using the url "<your machine name>.local/~<your user name>/<somefolder>/<pdf Name>
My machines name is "Proton" (you can get this from the System Preferences > Sharing pane)
My user name is "wayne"
so I stored a pdf file (DM00027543.pdf) in the folder "/User/wayne/Sites/PDFTest"
and stored the URL "http://proton.local/~wayne/PDFTest/DM00027543.pdf" in the "URL" field of the Hyperlink inspector

CS3 AE: Can't import mov/qt files?

Hello, I cannot view and import qt / mov files into CS3 Premiere and AE. I do not have Quicktime player install. Is that the reason why I cannot view and import qt/mov files? Thanks for the advice

As Rick said, importing Qucktime files requires Quicktime to be installed. There is no way around it, as much as you may want to avoid it for other reasons...
Mylenium

Can you import Catia V5 files with Acrobat Professional 8.2?

Hi,
In my version of Acrobat Pro 8.2 there is tab called 3D tool under Tools> advanced editing.
It seems like it should be possible to insert a 3D file in a PDF in this version as well, but it will not recognize my Catia files.
Can I export my catia file to something that the PDF doc understands?
Catia will export to stl, igs, 3dmap, 3dxml, cgr, hcg, vps, vrl
Which formats does it understand, anyway ? I can not find any info in regard to this.
Do I need to upgrade to have this capability?
Sincerely,
ggaarde

With Acrobat Professional 8.2 the 3D Tool will only import U3D files. To import CATIA V5 files you would need to have Acrobat 3D 8.1 or later. In Acrobat 9 the name was changed to Acrobat Pro Extended. You do get some huge 3D Tools with the 3D nad/or Extended apps. However, if you can get your CATIA file converted to U3D format, then you will be able to create a 3D PDF with the Pro version of Acrobat 8.2.

CS3 - Can I Import AVCHD footage into Premiere and if so, how ?

Hello All;
Can you tell me if I can Import AVCHD footage (Like from a Panasonic Professional Camcorder) into Premiere CS3 ? My version doesn't recognize the .MTS files that the camcorder generates. If there is any way to import AVCHD footage, could you tell me how ? Thanks.
Tim

Convert AVCHD to HDV http://forums.adobe.com/thread/390605?tstart=0
or Cineform Neo Scene $100-$129 http://www.cineform.com/neoscene/

I had to buy a new computer and now can't get my CS3 with CS5 upgrade to work on windows 8.1. What can I do to get them to load and work?

I can load CS3, but it won't let me register it and I can load CS5 upgrade, but when I open CS5 it shows fault and closes. What can I do to get these programs to work on my new computer?

Registration has always been optional, so there is no point in trying. Those pages on the Adobe site are long gone. CS5 crashing is another matter, but without some crash logs and more detailed system information nobody can realyl know. This could be a mundane permissions issue on some files, could be a crash with the hardware acceleration stuff but just the same could be the activation system failing. Impossible to tell based on your limited information.
Mylenium

Can't Import .avi xvid file with Premiere Elements 11

I just purchased Premiere 11, and it won't import an .avi xvid file. The codec is installed as reported by G-Spot. And the file imports to Win Movie Maker just fine. Any known problems here?
Thanks

I have used Premiere Elements 11 for a few years and never had any problems with codecs, it ran .avi files fine, but then my hard drive started sending failure eminent warnings so I saved everything I could (for some reason I was never able to save a backup with my old system), I got a new hard drive, loaded a clean new Windows 7 install and built my system from there.
When I got to the Premiere Elements 11 and used it I noticed it came up with the "no codec for .avi" message that I had never seen before and would not play the same .avi movies that I had played with it hundreds of times before.
I was a little baffled so I went back and installed my old Premiere Elements 8 that I used to use and same codec message came up.
I remembered that I had some other video players installed on my old system so I went back and installed the old players one by one.
1. Cyberlink PowerDVD from the original Dell install didn't fix the codec problem.....
2. I had the "REAL" player on my old system so I installed it next and it didn't fix the codec problem....(The new "REAL" player live is a little to aggressive for me so I uninstalled it when it didn't fix my problem)
3. I had Quicktime installed so I installed it again and BINGO, my Premiere Elements 11 now plays .avi files like it used to.
I won't guarantee it will work for everyone but the basic Quicktime player is free so it won't hurt to try it (And it definitely worked for me)

Can't import native AVCCAM files with Mountain Lion OS

I used to be able to edit AVCCAM files with the Panasonic plug-in in Final Cut Pro 7, but since updgrading to Lion, I can no longer import the files. Is there a workaround?

double post.
https://discussions.apple.com/thread/4477941?tstart=0

DVCPro 50 Codec Conversion

I am currently using Adobe Premiere CS3 at my job and have run into yet another situation where I am forced to use someone else's Final Cut Pro files to edit with. Of course, they are Quicktime files with the dreaded DVCPro 50 codec.
In the past I have brought these home to my Macintosh and spent the time to convert the footage outside of work, but I have just discovered the Raylight Encoder Pro and thus far the demo version has allowed me to view all of the files I was given on my timeline, albeit with a watermark.
Before I purchase the full version, I would like to know if Adobe has any specific solutions they would recommend outside of using this third party software. Also, if third party is the way to go, does anyone has experience with using the Raylight Encoder Pro?
Here is their website:
http://www.dvfilm.com/raylight/EncoderPro/index.htm

I'm not aware of any built-in DVCPRO 50 solutions. Third party is the only way I know of to use them.

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

CS5 - Output a .m2ts file With DD 5.1

Hi all,
I have just installed my new copy of CS5 which is an upgrade from CS3. (I had to reinstall due to the 64bit requirement). Anyway, on my CS3 install with the mainconcept plug-in installed I could output to a m2ts file keeping DD 5.1. I cannot see an option to do this on CS5... I assumed that you didnt need an additonal plug-in with this version as it natively handled AVCHD files?
How do I go about getting a .m2ts file?
Thanks in advance.
Rich

Hi Hunt, thanks a lot for replying.
Sorry, I perhaps didnt explain my issue very clearly...
...with my CS3 version I installed the MainConcept Pro plug-in which enabled CS3 to import and export m2ts files, and as I'm sure you know this file format supports DD 5.1. Now, with CS5 it supposedly supports AVCHD (m2ts) files natively, and indeed I could drag a m2ts file from my camcorder into my project. However, when I go to export the movie I dont get an option anywhere to allow me to save the movie as an m2ts file. (FYI on CS3 with the MainConcept plug-in I had an option to Export to MainConcept Pro where I could chose the usual bitrate, DD 5.1 etc). I dont know if the MainConcept Pro plug-in works with CS5.
Hopefully I have explained myself a bit better this time!
Thanks again.
Rich

HT2914 Hello: I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080,

Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, Paul

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

Can't import RAW and psd file with same name different extension

Trying to import a folder of images from desktop that I have been working with in Bridge CS3.
LR won't import a RAW file that has a PSD file by the same name. Tried renaming the PSD and deleting the one with the same name, but says it is still there and won't import the RAW file - What is the correct workaround on this? Why can't it import same name files with different extensions?

A forum search for 'RAW + JPEG' will give you more posts on this than you care to read. This will change. For now, import the RAW and PSD's from separate folders and then move them together for within LR.
LR is seeing the RAW as a sidecar to the PSD. It is an unforseen effect of the RAW + JPEG thing where they decided to not import the JPEG, seeing it as basically a preview image for the RAW.
LOL
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

CS3 with Codec MainConcept DVCPro HD CODEC v7 7 0 23862 rar - can't import AVCHD (m2ts files)

Similar Messages

Maybe you are looking for