CS3 won't start - error at TWAIN building on Vista 64

I just got an HP pavilion d7 computer running Vista Home Premium (64) on a 2gb processor with 4gb RAM. I successfully installed CS3, entered the license code and activated the software, but when I try to run Photoshop CS3, I get the infamous Adobe Photoshop CS3 has stopped working properly error at the screen where it says it is building TWAIN menu items.
I've tried the licensing update from Adobe with no success. I've tried running it as administrator, using the compatibility mode...no success. I'm at my wits end.
Incidentally, I tried installing the PSE7 trial (because I was going to buy it next week) and that gives me the same error whenever I try to access the Editor.
Can someone help me please?

kelly170 wrote:
How do I uninstall TWAIN drivers? I'm not really even sure what these are.
Scanner drivers, specific drivers for digital cameras and in part even specific printer drivers for printers that use PictBridge or provide memory card slots. Also graphics programs will install dummy TWAIN drivers on occasion. If they are device drivers, the should be visible in your Add or Remove Programs system panel. Otherwise check your Twain sub-directory inside your Windows operating system directory and rip out any suspicious stuff. Once gone, they will not be loaded. Windows' file protection and recovery may restore them, though.
Mylenium

Similar Messages

ITunes won't start, error missing files

iTunes won't start - error says missing files

See Troubleshooting issues with iTunes for Windows updates. Should you run into problems please post the full and precise text of any error messages.
tt2

Premiere Pro CS3 won't start

Hi everyone,
I just installed my Premiere Pro CS3 on my win vista but it won't start.
I'm so frustrated about this...
I post you here the details of the error (sorry the italian I translate what I can):
Product
Adobe Premiere Pro.exe
Problem
Ha smesso di funzionare (Stopped working)
Date
31/01/2009 17.04
Firma del problema (Sign of the problem)
Nome evento problema (event name): APPCRASH
Nome applicazione (appl name): Adobe Premiere Pro.exe
Versione applicazione (appl version): 3.0.0.0
Timestamp applicazione (appl timestamp): 465d3f5e
Nome modulo con errori (name of module with errors) : StackHash_ebd0
Versione modulo con errori (version of module with errors): 0.0.0.0
Timestamp modulo con errori (timestamp of module with errors): 00000000
Codice eccezione (exception code): c0000096
Offset eccezione (exception offset): 10b72a3b
Version OS: 6.0.6001.2.1.0.768.3
ID impostazioni locali (local settings ID): 1040
Informazioni aggiuntive 1 (Added infos 1): ebd0
more infos 2: c410d0963b381384ec90a36bd6764e67
more infos 3: 303b
more infos 4: fbd1a9d680bf88e6aa4f516b56c2c783
I hope someone will be of help =|
Thanx in advance

>Versione applicazione (appl version): 3.0.0.0
I don't use Vista, but I **think** I have read that an update is required to get CS3 to work with Vista
Check here, and read the update descriptions
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
I use English... so don't know about an Italian version update

Web services won't start - error 100002

Hi there
I have done a freash install of Leopard Server 10.5.4 and updated to 10.5.8 on an Xserve G5. Added a 2nd web site (in addition to default) and now web services won't start returning the error:
A service has encounted an error.
Try to refresh the view (mysever.com/Web)
(Could not start web service - details in error log.)
100002
Below is in the error log for both web sites:
Syntax error on line 1310 of /private/etc/httpd/httpd.conf:
Invalid command '<Proxy', perhaps mis-spelled or defined by a module not included in the server configuration
The following is a Console Message:
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3[4682]) Exited with exit code: 1
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3) Throttling respawn: Will start in 10 seconds
Any pointer of how to solve this would be appreciated.
Cheers, Paul

Thanks for the reply. line 1310 is <Proxy disabled_proxy>
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
<Directory "disabled_proxy">
Allow from example.com
Order Deny,Allow
Deny from all
</Directory>
<Proxy disabled_proxy>
Allow from example.com
Order Deny,Allow
Deny from all
</Proxy>
</IfModule>

Cs3 won't start and hand on "reading preferences"

Hello
All of a sudden my photoshop won't start and hang on the splash screen " the last message is "reading preferences"
I Run WINXP service pack2.
Photoshop version is 10.0.1
I rebooted did everything (without re-installing)
Is there a way to get out of this ?
Bruno

You could try resetting your preferences as described in the FAQ.
http://www.adobeforums.com/webx/.ef4a07f/1
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

[WinXP] Safari 3.1 Crashes / Won't Start / Error Report

When I try to start Safari 3.1 in Windows XP, it crashes right away.
Safari Web Browser has encountered a problem and needs to close. We are sorry for the inconvenience.
Please tell Microsoft about this problem.
Well I decided to talk to Apple first. Safari 3.1 was successful on my mac, but won't start on my WinXP machine. Anyone have the same problem?
It's not a VM, either.

Try this:
- Open a command shell. On Vista, do this as an administrator
- cd \windows\fonts
- dir /ah .*
- If this returns files like "._marlett.ttf", this is what is likely causing your crash
- del /ah .*
I'm not saying this will fix all crashes, but I've seen this fix at least one crash on launch a user was experiencing.

Itunes won't start, error 7, windows error 126.

After updating my itunes a few weeks ago, it now won't load and I get the following error message;
the program can't start because avfoundationcf.dll is missing from your computer. try reinstalling the program to fix this.
followed by this error messsge;
itunes was not installed correctly. pleasse reinstall itunes. error 7 (windows error 126).
I've tried numerous things including solutions posted in this forum but I can't fix it. I'm running windows 7 64bit btw. If anyone could please help that would be great, thank you.

the program can't start because avfoundationcf.dll is missing from your computer. try reinstalling the program to fix this.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

XPS L502X integrated webcam won't start, error message "Close the other video streaming applications to start video"

Hello, i've been working with this issue for more than a week now. Have tried all the solutions on the net without any success.
Windows 7 home premium x64 is installed on the machine.
When trying to use any application using camera shows up a message, that webcam is used by another application. This pops up on Skype and Dell Webcamcentral. Ms Silverlight shows black screen, no message. The device is present under imaging devices in device manager. The driver installed is Microsoft 6/21/2006 ver. 6.1.7601.18208, status "device is working properly". Driver files: ksthunk.sys, usbvideo.sys and ctclsflt.sys after installing webcam central.
Here is what i tried:
1. Installing drivers from Dell.com in the correct order
2. Uninstalling webcam driver and letting windows install the driver from windows update.
3. Uninstalling windows driver and installing Quanta webcam driver before restart. Note, that in all 3 steps quanta driver never showed up in driver details in device manager.
4. Uninstalled skype.
4.Uninstalled all "usb root" in device manager, restarted, windows installed it's drivers, installed Dell_SX2210-Monitor_Webcam SW RC1.1_ R230103.
5. Uninstalled Webcamcentral, downloaded and installed ver 6.1 Skype.
6. Started windows in a clean boot state.
7. Installed process observer. Webcam is used only by skype, but skype gives "camera used by another app" error message.
8. Turned off laptop, removed ac power and battery, pressed power on button for 30 secs.
9. Tried to update driver through device manager - driver is up to date.
10. Reinstalled windows and installed chipset drivers + wireless drivers and let the windows update. Then installed all Dells drivers in the correct order.
11. Restored to the point before windows update and installed Dell drivers in the correct order.
12. Restored to the point after windows update again. Installed ms Silverlight, camera shows black screen. Room is light, tried a sheet of white paper close to the camera.
13. Tried different skype versions again, uninstalled skype.
14. Process observer shows that nothing uses webcam. Supportassist shows failure in webcam at all checkup stages. Supportassist suggests to turn of programs that might be using camera.
15. Tried all the steps before windows reinstall.
16. I gave up and ask for your help.
Here is Supportassist diagnostics log:
SupportAssist Log File
Sunday, April 12, 2015 6:42:12 PM
Overall Test Result: Failed
WEBCAM
Driver Provider:
Microsoft
Driver Version:
6.1.7601.18208, 6/21/2006
Capture To Screen Test
Test Started
4/12/2015 6:26:18 PM
Error Message:
Error creating the filter graph for rendering video.
4/12/2015 6:30:55 PM
Test Finished:
Failed (Error code: WWC02-7TM)
4/12/2015 6:30:55 PM
Capture To File Test
Test Started
4/12/2015 6:30:55 PM
Error Message:
Error creating the filter graph for rendering video.
4/12/2015 6:36:27 PM
Test Finished:
Failed (Error code: WWC01-XEI)
4/12/2015 6:36:27 PM
Edge Detection Test
Test Started
4/12/2015 6:36:28 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:36:58 PM
Test Finished:
Failed (Error code: WWC09-VFH)
4/12/2015 6:36:58 PM
Luminance Depth Test
Test Started
4/12/2015 6:36:58 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:37:28 PM
Test Finished:
Failed (Error code: WWC08-5TS)
4/12/2015 6:37:28 PM
RGB Channel Test
Test Started
4/12/2015 6:37:28 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:37:59 PM
Test Finished:
Failed (Error code: WWC05-OKO)
4/12/2015 6:37:59 PM
RGB Color Depth Test
Test Started
4/12/2015 6:37:59 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:38:29 PM
Test Finished:
Failed (Error code: WWC07-WLL)
4/12/2015 6:38:29 PM
RGB Line Amplifier Test
Test Started
4/12/2015 6:38:29 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:39:00 PM
Test Finished:
Failed (Error code: WWC06-IV1)
4/12/2015 6:39:00 PM
RGB Line Driver Test
Test Started
4/12/2015 6:39:00 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:39:30 PM
Test Finished:
Failed (Error code: WWC04-YMZ)
4/12/2015 6:39:30 PM
RGB Pixel Test
Test Started
4/12/2015 6:39:30 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:40:00 PM
Test Finished:
Failed (Error code: WWC03-1VT)
4/12/2015 6:40:01 PM
System Summary
Product
Dell System XPS L502X
Service Tag
JQNQCT1
Express Service Code
429-708-457-81
Operating System
Operating System
Name
Microsoft Windows 7 Home Premium Edition (64-bit)
Service Pack
Service Pack 1
Build Number
7601
DirectX Version
11
Windows Directory
c:\windows
System Directory
c:\windows\system32
Maximum OS Memory
16.00 GB
System Name
INDRE-PC
User Name
Indre
Windows Experience Index
Base Score
5.9
Processor Subscore
7.5
Memory (RAM) Subscore
7.6
Graphics (Aero) Subscore
6.2
Gaming Graphics Subscore
6.2
Primary Disk Subscore
5.9
Assessment State
Valid Scores
Assessment Date
4/9/2015 7:23:35 AM
Windows Update
Automatic Updates
Automatic download and install
Last checked
2015-04-11 22:25:37
Security
Windows Update
Automatic Updates
Automatic download and install
Last checked
2015-04-11 22:25:37
Firewall - Windows Firewall
Windows Firewall Enabled
Yes
Motherboard
Manufacturer
Dell Inc.
Product
0NJT03
Chipset
Intel PCH HM67
ePPID
CN0NJT034864324S0399
BIOS
Vendor
Dell Inc.
Release Date
09/07/2012
BIOS Version String
A12
ROM Size
2.50 MB
SMBIOS
Version
2.6
ACPI Thermal Zones
TZ00
Current Temperature
65 C
TZ01
Current Temperature
65 C
Intel(R) Mobile Express Chipset SATA AHCI Controller
Interface
PCI
Location
PCI bus 0, device 31, function 2
Type
SATA Controller
Class
01h:06h:01h
PCI Identification
Vendor Name
Intel Corporation
Vendor ID
8086h
Device ID
1C03h
Revision
05h
Driver Provider
Intel
Driver Version
10.1.2.1004, 1-12-2011
Driver
c:\windows\system32\drivers\iastor.sys
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
Interface
PCI
Location
PCI bus 0, device 26, function 0
Type
USB EHCI Controller (USB 2.0)
Class
0Ch:03h:20h
PCI Identification
Vendor Name
Intel Corporation
Vendor ID
8086h
Device ID
1C2Dh
Revision
05h
Driver Provider
Intel
Driver Version
9.2.0.1013, 9-16-2010
Driver
c:\windows\system32\drivers\usbehci.sys
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
Interface
PCI
Location
PCI bus 0, device 29, function 0
Type
USB EHCI Controller (USB 2.0)
Class
0Ch:03h:20h
PCI Identification
Vendor Name
Intel Corporation
Vendor ID
8086h
Device ID
1C26h
Revision
05h
Driver Provider
Intel
Driver Version
9.2.0.1013, 9-16-2010
Driver
c:\windows\system32\drivers\usbehci.sys
Renesas Electronics USB 3.0 Host Controller
Interface
PCI Express x1
Location
PCI bus 4, device 0, function 0
Type
USB xHCI Controller (USB 3.0)
Class
0Ch:03h:30h
PCI Identification
Vendor Name
NEC Corporation
Vendor ID
1033h
Device ID
0194h
Revision
04h
Driver Provider
Renesas Electronics
Driver Version
2.1.27.0, 9-13-2011
Driver
c:\windows\system32\drivers\nusb3xhc.sys
Processors
Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (CPU:0)
Name
Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
Cores
4
Threads
8
Signature
206A7h
Family
6h
Model
2Ah
Technology
32 nm
Temperature
66 C
Performance
Max Qualified Speed
2.20 GHz
Max Turbo Boost Speed
3.09 GHz
Current Speed
2.79 GHz
Multiplier
x 28.0 (8 - 22)
Max Turbo Boost Ratio
x 31
Bus Speed
99.78 MHz
Features
MMX, PSE36, EM64T, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVX, AES, XD, VMX, IDA
Cache Summary
L1 Data Cache
4 x 32.00 kB
L1 Instruction Cache
4 x 32.00 kB
L2 Cache
4 x 256.00 kB
L3 Cache
6.00 MB
Core : 0
Temperature
65 C
Threads
2
Core : 1
Temperature
69 C
Threads
2
Core : 2
Temperature
67 C
Threads
2
Core : 3
Temperature
66 C
Threads
2
L1 Data Cache
Quantity
4
Level
L1
Type
Data
Size
32.00 kB
Associativity
8-Way Set-Associative
Line Size
64 bytes
L1 Instruction Cache
Quantity
4
Level
L1
Type
Instruction
Size
32.00 kB
Associativity
8-Way Set-Associative
Line Size
64 bytes
L2 Cache
Quantity
4
Level
L2
Type
Unified
Size
256.00 kB
Associativity
8-Way Set-Associative
Line Size
64 bytes
L3 Cache
Quantity
1
Level
L3
Type
Unified
Size
6.00 MB
Associativity
12-Way Set-Associative
Line Size
64 bytes
Memory
System Memory
Total Physical Memory
8.00 GB
Maximum Supported Memory
8.00 GB
Page Files
Total Size
7.90 GB
Page File c:\pagefile.sys
Location
c:\pagefile.sys
Size
7.90 GB
4096 MB DDR3 (1333 MHz)
Source
SMBIOS
Memory Size
4.00 GB
Memory Type
DDR3 (1333 MHz)
Memory Manufacturer
Hynix/Hyundai
Memory Part Number
HMT351S6CFR8C-H9
Memory Serial Number
3280B845
4096 MB DDR3 (1333 MHz)
Source
SMBIOS
Memory Size
4.00 GB
Memory Type
DDR3 (1333 MHz)
Memory Manufacturer
Kingston
Memory Part Number
9905428-045.A00LF
Memory Serial Number
3A2D9D10
Batteries
Main Battery
Battery Name
Dell
Manufacturer Name
SIMPLO
Type
LION - Lithium Ion
Battery Serial Number
1130
Designed Capacity Percentage
13
Current Charge Percentage
100
Current Charge
7.23 Wh
Full Charged Capacity
7.23 Wh
Designed Capacity
57.72 Wh
Voltage
12.41 V
Communications
Network Card - Intel(R) Centrino(R) Wireless-N 1030
Vendor Name
Intel Corporation
Serial Number
4C-EB-42-82-35-6B
Interface
PCI Express x1
MAC Address
4c:eb:42:82:35:6b
Adapter Connected
Yes
Current Speed
117.00 Mbps
IP Address
192.168.0.129
IP Mask
255.255.255.0
Gateway IP Address
192.168.0.1
DHCP Server
192.168.0.1
Adapter DHCP Enabled
Yes
Driver Provider
Intel
Driver V

Iqb,
Make a system restore point.
Start, control panel, device manager, Go to the USB Controller section and click the + sign. Go to each USB Root Hub. right click on it, left click uninstall.
Restart your computer. When you login, the new hardware wizard will reinstall everything. Please be patient, it could take up to 2 minutes.
Try the webcam and see if it works.
If no, then the webcam became detached from the motherboard, usually near the webcam
Rick

PS CS3 won't start due to VersionCue.dll missing

UGH! I am so fed up with CS3. I've been running CS3 for quite awhile now, but was recently switched to a new domain on my network. Photoshop CS3 will not open any documents now and instead gives me the error:
The application has failed to start because VersionCue.dll was not found.
VersionCue CS2 is running, which is bizzare because I've got the full CS3 suite. Does anyone have any suggestions outside of having to reinstall CS3?

Versioncue has caused me problem in the past.
I had to reinstall ( no biggie ) and from then on I disable it in PS prefs and Bridge as I never use it anyway.
Never had a problem since.

Photoshop CS3 won't start anymore

I use Photoshop CS3 with OSX 10.4. Everything has been working great until reccently. I had a huge job and the amount of memory it took was causing 'scratch dick full' errors. One day I pulled Photoshop up and it got part way through opening and crashed. It has been doing this ever since. I have cleared over 22 gig of space, cleared the preferences by holding down the control, option, shift.... when starting, and finally reinstalled Photoshop. Nothing works. All of my other software is working great. However, I also have CS2 and Photoshop isn't starting on that version either.
What can I do to get it going again? I have jobs backed up and I'm falling behind fast!
Any help appreciated!

Press and hold Ctrl - Shift - Alt IMMEDIATELY after starting Photoshop from its menu item or shortcut. This will allow you to reset the preferences to initial defaults.
I'm betting that will help.
-Noel

Encore CS3 won't start through Premiere or directly

I recently installed Premiere Pro CS3 with Encore. I completed a short highlight video that I was working on, and attempted to export to Encore. After I selected the direct burn option in Premiere, the video converted alright, and then (I assume from the description in the settings window) Encore tried to open to burn the video to DVD. There was a blank DVD in my drive at the time I did so, if that matters. After waiting 5 mins or so, all I saw was a white window in the middle of screen, and my cursor in 'working in the background' mode. I force quit out of Encore, and attempted to start it directly without any further luck. When trying to start it directly, I saw no white window, but the program was running in task manager, as it was when it tried to run through Premiere.
I'm doing all of this on a brand new machine:
AMD Phemom X4 Quad Core 2.3ghz
8GB DDR2
ATI Radeon HD 3200
Vista SP1
I can provide more information if needed. Thanks in advance.

The first thing that I would do is apply the detective work in this ARTICLE to see if there is some systemic issue. Be very sure to follow any links in any error/warning message at the time that Encore fails. Matter of fact, I would launch Encore, and then follow the tips in the article, to make sure that things were current.
If there are no clues, then I'd try a Repair Install, in hopes that a missing, or corrupt .dll, or similar, would be replaced, or reparied.
I've seen very few instances of Encore not launching, especially as a stand-alone.
Good luck,
Hunt

Recurring iTunes problem; won't start/errors

There is a recurring problem with iTunes version 7.7. It has also occurred on versions from 7.4 through 7.6. Upgrading to iTunes 7.7 results in a no-start for iTunes. No errors or messages. It shows up in processes. If all Apple software is removed and registries edited, then re-install results in iTunes not starting with error like "App failed to start because SCARDDLG.dll cound not be found". This is Smart Card service (which I dont' use but iTunes wants). If Smart Card services are installed/started, iTunes will still not start (but no fatal error msg. or any messages at all).
I have removed/reinstalled several times. I have been through the MS methods for crypto services, edg.log rename, etc. It has still not helped. At this point I may have to resort to the same method when iTunes 7.4 gave this same problem. Get rid of all your APple software and re-install 7.3 from one of the retro software sites, i.e. oldapps.com. It also means you can forget about using your iPhone and many other newer Apple devices.
I would have thought that since this problem has been around for at least 4 versions and many users won't buy Apple products like iPhones since they can't use them on systems that won't run Apple software, that maybe this would be motivation for Apple to fix the problem and/or publish a solution. BTW; I am running Trend Micro and yes, ports and web addresses are configured for proper access.

There is a solution here: http://discussions.apple.com/thread.jspa?threadID=1661935

Xorg won't start error 11

I'm not sure what is wront, I've tried nvidia, vesa, and nv drivers. Disabling and enabling hotpluging.
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux gordon 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 09:47:26 UTC 2009 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 2 14:31:21 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI: (0@0:3:3) nVidia Corporation MCP73 Co-processor rev 162, Mem @ 0xeff00000/524288
(--) PCI:*(0@0:16:0) nVidia Corporation GeForce 7100/nForce 630i rev 162, Mem @ 0xed000000/16777216, 0xd0000000/268435456, 0xee000000/16777216, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x26) [0x4ed8e6]
1: /usr/bin/X(xf86SigHandler+0x39) [0x496739]
2: /lib/libc.so.6 [0x7fc468682150]
3: /lib/ld-linux-x86-64.so.2 [0x7fc46a3c5761]
4: /lib/ld-linux-x86-64.so.2 [0x7fc46a3cc96b]
5: /lib/ld-linux-x86-64.so.2 [0x7fc46a3c83b6]
6: /lib/ld-linux-x86-64.so.2 [0x7fc46a3cc22b]
7: /lib/libdl.so.2 [0x7fc469fb1f5b]
8: /lib/ld-linux-x86-64.so.2 [0x7fc46a3c83b6]
9: /lib/libdl.so.2 [0x7fc469fb230c]
10: /lib/libdl.so.2(dlopen+0x31) [0x7fc469fb1ec1]
11: /usr/bin/X(DLLoadModule+0x1c) [0x46d53c]
12: /usr/bin/X(LoaderOpen+0x18c) [0x46b11c]
13: /usr/bin/X [0x46c88a]
14: /usr/bin/X(LoadModule+0x24) [0x46d2d4]
15: /usr/bin/X(xf86LoadModules+0xa9) [0x467f49]
16: /usr/bin/X(InitOutput+0x4b4) [0x469ea4]
17: /usr/bin/X(main+0x286) [0x4334c6]
18: /lib/libc.so.6(__libc_start_main+0xe6) [0x7fc46866e546]
19: /usr/bin/X [0x432a79]
Fatal server error:
Caught signal 11. Server aborting

Hi Reasons,
Your problem seems to appear atfer loading the libglx module:
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
Maybe you're having this issue described in nouveau's wiki: http://nouveau.freedesktop.org/wiki/InstallNouveau
9. Now start Xorg and run for cover. If you used the the nvidia blob before, the X server may possibly not start because NVIDIA overwrites the libglx.so which the X server provides with it's proprietary libglx.so. If that happens, install the X server package from your distribution again to resetore the original libglx.so and make a backup copy of it in case you install the blob again.

CS3 won't start after system restore, fails to reinstall

I am running CS3 design premium on Windows 8. I've have the computer (Lenovo with Intel i5) for two months, though I used the design suite on my previous computer. I had to run System Restore to fix a problem with Firefox, and after I did none of my Adobe products worked. I have uninstalled/reinstalled several times while following the Adobe Help page "error message at installation" guide. Each time I get the message that Acrobat installed correctly, and everything else "Component install failed." I also wiped everything Adobe off the program list (there were a few CC programs I had trialed, plus Flash Player and some plugins) ran the CC cleaner and still got the same error message. I even tried downloading the program files from Adobe in case there was a problem with my disk and that wasn't it either. I tried enabling FLEXnet and installing under a new user, each to no avail. Examining the log file found no instances of "Return value 3" and "FATAL." The search for "ERROR" found several items that I had either already tried or made no sense.
I ran the system restore again to an earlier point, and now I can't even uninstall anything. The CC cleaner tells me some files could not be cleaned, and I should close my browser and try again, but there are no browsers open. Restarted computer and tried again, same thing. It seems I've tried all the options.
Super frustrated.

Installation and Licensing Problems | Mylenium's Error Code Database
Read the part about the CS3 installer bug.
Mylenium

System won't start - Error 0xc000014c and System Repair fails to work.

Hi,
I am running Windows Vista Home Premium x64 on my Dell Inspiron 1520 Notebook and I had to force shut down the computer yesterday because it was unresponsive (Programs wouldn't execute, shut-down didn't work). When I turned it back on I got an error screen:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the Problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Windows\system32\config\system
Status: 0xc000014c
Info: Windows failed to load because the system registry file is missing, or corrupt.
ENTER=Continue ESC=Exit
I inserted my Windows Installation disc and pressed ESC to restart, then pressed F12 and booted from the DVD-drive. I waited for the "Windows is loading files..." and "(c) Microsoft Corporation" loading bars, then clicked on "Next" at the language page and "Repair your computer" at the install Vista page. A loading box pops up "Searching for Windows installations..." and after a few minutes I can access the "System Recovery Options" box, which shows my OS. I select it and click "next", but an error message pops up saying:
System Recovery Options
This version of system recovery options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows.
[OK]
The other option at the bottom of "System Recovery Options" is "Load Drivers." If I click OK, I can see all the folders on the installation disc, and any Setup Information (*.inf) Files. I can also browse my whole drive, but I cannot open any files other than .inf. I can even navigate to my USB stick if I plug it in. I tried opening each of the .inf files that I found in "sources" which was where "Open" opened to but this happened for all of them:
Add Drivers
The specified location does not contain information about your hardware.
[OK]
My first question: is there an .inf file that I could download and access from the USB stick that would repair my system?
I also wanted to do a system restore, and found instructions how to burn a Vista x64 recovery disc from a downloadable iso on the HowtoGeek.com (http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/). I booted from my newly burned system recovery disc, and it went through the two loading screens, and then to a black screen with the cursor. I waited here for about 20 minutes and nothing seemed to be happening, so I gave up.
My second question: How can I get the system recovery disc to work?
My initial post was on HowtoGeek.com forums:
http://www.howtogeek.com/forum/topic/startup-error-0xc000014c-cannot-repair-or-restore-my-system?replies=2#post-50643
And I was referred here.
Any advice is appreciated, in the mean time, I will keep trying the recovery disc to do a system restore. Maybe I just need to wait longer (Hours, days?)
Sincerely,
Daniel
*EDIT
I guess I will just reinstall Windows.

Hi Daniel,
The reason why the error message “This version of system recovery options is not compatible with the version of Windows you are trying to repair” appears can be that your Windows installation is a RTM one while Server Pack 1 is installed on you system. Therefore, your disk version is lower than your system so that you cannot use this disk to enter WinRE.
The recovery disk you created is a third-party tool which we are not familiar with. We cannot tell why it does not work on your computer. You need to contact the tool manufacturer for more information.
Now the simplest way to resolve this issue is to restore the system to its factory settings. If you have important files on the computer, please unplug the drive and install it on another computer as a slave drive. Then you can access your data on that computer. After that, you can restore the system to its factory settings. If you would like to know how to restore the system to its factory settings, please contact Dell or look up your computer manual.
Hope it helps.
Tim Quan - MSFT

CS3 won't start - error at TWAIN building on Vista 64

Similar Messages

Maybe you are looking for