CS4 32 bit will not open under Win 7 64 bit.

Upgraded from Win 32 bit XP to Win 7 64 bit. While in the process of rebuilding my system downloaded and installed Beta versions of CS6 and Bridge for CS6, before trying to install my current CS4 version. I do not know whether this is causing any of the following problems that I am experiencing.        A short time later I installed CS4, ending up with both the 32 and 64 bit versions of CS4. Interestingly, this install did not install a CS4 version of Bridge in either 32 bit or 64 bit, possibly because the Beta CS6 version of Bridge was installed?      
However, from a previous system backup I was able to retrieve a copy of the CS4 version (presumably 32 bit version) of Bridge, which I simply copied to the new system and found that it works fine. Interestingly now the CS6 version of Bridge loads one of the two CS4 versions and not the Beta CS6, but I cannot tell which one of the CS4 versions. Question: how does one determine whether the loaded version is the 32 or 64 bit version? If I click on System Info it does say X64 which I assume means the 64 bit version is loaded. Is this the way to tell?        
The CS4 version of Bridge now apparently defaults to the 64 bit version of CS4 on opens.     
I have now read that most if not all my previous plugins will not run under CS4 64 bit, so I really need to be able to run CS4 32 bit. Unfortunately, when I try to open CS4-32, it fails with the following msgs: "Adobe Photoshop CS4 Has Stopped Working." Then,     
"Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 11.0.0.0
Application Timestamp: 48d3882e
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
Exception Code: c0000005
Exception Offset: 0002880f
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt"        
The CS4-64 version continues to run as it should.
Assuming that CS6 will come with a 32 bit version when it hits the market I will be upgrading, but for now I really need a working 32 bit version of CS4.
Please help.
 

Help - System Info will tell you whether you're running the 64 bit or 32 bit version (look at the end of the first line).  EDIT:  Note that originally said Help - About and have corrected this.
Yes, Photoshop CS6 provides both a 32 and 64 bit version.  In fact, it should have installed both on your system.
Normally the two versions don't get into eachothers' hair, EXCEPT for file associations, which may explain the mixup you're having where Bridge runs the last version installed.  I doubt it has to do with your crash though.
Have you copied any plug-ins or set an Extra plug-ins folder so that there could be a mixup between the two versions?
Have you checked to see if your display driver has been updated?  Go to the web site of the maker of your video card and download the version that matches your hardware and OS.  Display driver updates solve many problems.
-Noel

Similar Messages

  • I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

    Hi, I'm helping StringSinger2 with this problem.
    The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
    That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
    SO...
    When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
    Many Thanks!

  • Windows CS4 files will not open on the Mac

    How come Windows CS4 files will not open on the Mac version?
    Kevin

    MCR wrote:
    Where are you getting your info from as I have personally opened a Windows After Effects project on the Mac many times!
    Anyway Adobe state they are cross platform so this is pretty missleading !
    MCR, you asked in your previous post:
    "Is that true of all CS4 project files like Premiere Pro and After Effects?"
    I answered:
    "No."
    Which means After Effects and Premiere project files are cross-platform. But Encore projects are not cross-platform.
    Is that clearer?
    Regarding your last sentence, if you're referring to AE and PPro files, that is true. But it is not true of Encore project files.

  • CS5 64 bit will not open

    I purchased a Sony Vaio with Win 7 64 bit to use CS5 64 bit.
    The program installs perfectly but when opening it gets to the final initalization and I get the "Adobe photoshop CS5 has stopped working" error.
    I've diabled all security and User account controls then reinstalled, I've even gone as far as a factory reset then redownloaded and reinstalled with no cure.
    The 32 bit version and Bridge work fine and the 64 bit version even opens in Safe Mode but still will not open in Admin or regular user accounts.
    Anyone have a clue?  Sony is not very helpful.
    Thanks

    I completely removed the Wacom driver and CS5 64 bit opened just like it should!
    Unfortunately those were the newest drivers for the Wacom Bamboo.  I'll try it again.  I can always remove them again.
    Thanks so much, I've been stressed out about this for days.

  • Installed latest firefox version on windows 7 32 bit. will not open. microsoft trouble shooter message incompatible application

    firefox will not open on windows 7 32 bit after installation. Microsft troubleshooting message incompatible application
    ''locking as a duplicate of https://support.mozilla.org/en-US/questions/1009843''

    Please try a clean Flash plugin install: [http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html] this error was seen last in version 11.8. Please also make sure that your video drivers are up to date: [https://forums.adobe.com/thread/945765] and [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

  • Photoshop CS5 64 bit will not open in windows 8

    PS CS5 will not open in windows 8 (neither will lightroom install)

    I am also having the same issue. I have Adobe Photoshop CS5.1.  The program worked fine in Windows 7 64bit. I recently upgraded laptops to a Samsung with Windows 8 - 64bit.  After full install program will not run/open.  Here is what I have tried to no avail:
    Right Click Photoshop.exe file > Properties > Compatibility Tab >
    Run Compatibility Troubleshooter > Troubleshoot Program >
    Checked box that reads: The program worked on earlier versions of Windows but will not install or run >
    NEXT > Selected Windows 7 for last version program ran on > NEXT >
    Test the Program button > NEXT > No this did not help, report the issue to Microsoft >
    Check for more solutions >  Issues Found with Yellow Exclamation Point - "Incompatible Program Detected" >
    CLOSE
    No other options have worked either. Ive tried compatibility for Windows XP SP2 and SP3 and neither of those worked either.
    I really do not want to pay to upgrade already - how can this be fixed??

  • Firefox 7 will not open in win xp, after being updated from previous version

    updated to firefox 7 on win XP. now firefox will not open.
    I unstnstalled firefox 7, and re-installed again, but it will not open

    I have the same problem (and with Mozilla Thunderbird) running with Windows Vista OS. The non-opening problem was preceded by a long period where Firefox and other programs were taking absurdly long times, such as one minute, to open. Starting Windows in "safe mode with networking" solves the problems. Similarly, I just found that If I run msconfig.exe and select "diagnostic startup" then Firefox and Thunderbird both start and start up really fast (that is, when most services and startup programs are prevented from starting). However there is no network so they do not connect. I then turned on (in msconfig) enough processes to get networking running and Firefox and Thunderbird still start up really fast.
    I am fairly certain there are no viruses on my computer, so the only other possibility is that some program/registry-entry is preventing the OS from working properly. The problem with windows that it is virtually impossible to find something like this, since the Windows OS has very weak self-diagnostics, and the registry is absurdly complicated with over half a million entries on my computer.
    If you can do a "repair install" then this will probably fix the problem, but I do not think that Vista has this feature. Alternatively an upgrade of the OS might fix it, such as from Vista to Windows 7.

  • Publisher 2013 - will not open under DOMAIN user profile.

    Publisher 2013 - will not open/launch under a normal user profile.  mspub.exe shows in taskmanager then disappears.  This is a Windows 7 machine.

    Hi,
    If we create a new Windows account on the computer and start Publisher with the new account. Does it work?
    If so, we maybe consider recreating the user profile of the specified account.
    If the issue persists with the new account, please repair the Office program and then try again.
    Best regards,
    Rex Zhang
    TechNet Community Support

  • CS4 Trial will not open

    I have downloaded the InDesign CS4 trial from the Adobe website, and installed with no problem.
    However it will not open. When I click the application I get the following error message:
    'You can't open the application "Adobe InDesign CS4.app" because it is not supported on this architecture.'
    I've checked the system requirements and sure I have what's needed.
    I'm running OS 10.5.6 on a dual 2GHz Power PC G5 with 1.5Gb memory.
    Any idea what's wrong?

    In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
    I've un-installed and installed again - still the same.
    Even downloaded the dmg again and done thwe whole thing over again.

  • Itunes will not open on win 7 pc after oct update?

    I am running a win7 pc-64bit os and itunes will not open since I updated it in Oct. I have attempted uninstalling and reinstalling the itunes s/w several times. I have tried without a firewall and with anti-virus programs disconnected. I do not get an error message. Itunes launches with a blank screen and the busy "spinner" spins until I reboot. Anybody with a similar problem or a solu

    I don't know if this will help you  but I just went through this. After three weeks of thinking it was my firewall and making all the adjustments suggested by apple, I discovered it was my Net Nanny software that was blocking my way. I had one character wrong in the accepted lists on websites and so it looked right to me when I checked. It wasn't until I completely uninstalled the software and reinstalled, and re-entered all my lists that I realized the error. Now it is working great. So you may want to check your list of approved websites VERY carefully or re-enter them on you firewall software or any content blocking software you may have.
    Hope that helps.

  • Itunes (64-bit) will not open iphone

    When I plug in my  iphone, iTunes pops up a message that says it will not read my device, because I need to download the 64-bit version of iTunes....I've downloaded the 64-bit version 5 times already....aaaargh.
    If anyone knows the resolution to my problem, I would appreciate the help.
    Thank you,
    Gus

    Try restarting the AMDS >  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service () on Windows

  • Photoshop CS4 Extended will not open file from Bridge.

    This is 2nd time this has occurred.  Last time I uninstalled CS4 and re-installed to fix it.  Prefer to not do that again.
    System: XP Media center, SP3,  3 GB memory, Athlon 64x2.  Generic - motherboard graphic card.  18 GB disk space remaining.
    Typical work flow is edit DNG files in Lightroom.  Once done, select DNG files in Bridge and under Tools run the Photoshop Image Processor which changes color profiles, sharpens and converts to JPEG and saves.  Done this probably a thoudand times.  Ran a batch Sunday afternoon fine.
    I may have interrupted an Image Processor batch that was just starting and glitched something.
    Now Bridge will open Photoshop but nothing gets imported with the Image Processor.  Also Bridge will not run a Batch.  Bridge will open Adobe Raw for editing a DNG but cannot load it into Photoshop.
    Once I try any of these things, Photoshop will usually not close/exit and many menu items are shaded out.  For example, opening a file or starting a new file is not available.  Activate/Deactivate not accessible.  Can Deactivate and Activate through InDesign. Photoshop seems OK otherwise if re-started after re-boot.
    Any ideas?
    Thank you.

    So far, no good.  Here is what I have done and current symptoms.
    1) I backed up all the settings and workspace files, then deleted them.  No change.
    2) No matter what I do, everytime I hold down the control, alt and delete keys when starting PS CS4 all I get is the Windows start settings "Adobe Photoshop CS4 Properties" box where you can select "Target" and "Start In" paths.  I do not get any dialog or confirmation to reset anything.
    3) Bridge successfully reset preferences using the Control key while starting it up.
    Everything about Bridge has appeared to function corectly before and after these changes.  But when the Tools/Image Processor or Batch is called, it starts Photoshop OK but nothing in imported to be processed.
    Photoshop opens (either from import or stand alone start) with menus partially functioning.  Under the file tab, nothign important works.  Cannot open a file, cannnot start a file, cannot exit - all grayed out.  But keyboard shortcuts do work and I can open a file or start a new file using the shortcuts.  Once I get a file open with the keyboard shortcut, most of the menu functions come back under the file tab and can be used and can exit PS.  The "X" in the upper right corner to close the program still remains greyed out and not functional.  The Activate/Deactivate options under Help remain grayed out.
    4) I deactivated the Suite from within InDesign and the I uninstalled only PS using the Windows uninstall utility.  I reinstalled PS from the CS4 Suite which of course reinstalled Bridge and some other utilities.  I reactivated from within InDesign and ran all updates from within InDesign since updates were still grayed out in PS. Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.)
    Problems still exist as described.
    5) Finally I deactivated again from within InDesign and re-installed the whole CS4 Suite without uninstalling anything before hand. I noticed that process did an uninstall before each module was re-installed.
    Problems still exist as described above.  I did notice that Photoshop showed itself still Activated (but grayed out) in the help menu even though I had previously deactivated the suite before the re-install.  Ran complete Updates from within Bridge.  Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.) but continued on. Everything else updated OK.
    I looked through the registry settings for the settings path as noted in referenced forum links and all looked correct.
    Additional Notes:  I installed the OnOne Plugin Suite 4 a few weeks ago.  Everything has run smothly since then until this problem poped up.  After the Uninstall/reinstall the OnOne menu option appears as normal.  As do my old Nik plug ins.  I doubt this has anything to do with the issue.
    Any more ideas outside of starting all over on a clean drive/machine which I really dread even contemplating?
    Thank you.

  • FF will not open in Win Vista

    I have long used FF; suddenly with 3.6.3 (or whatever is latest from mozilla.com), it starts as a process ("firefox.exe *32) but never displays a window.
    will NOT start in safe mode either; tried creating a new profile (per instructions from FF support chat line) -- also no-go.
    Previously tried completely uninstalling/reinstalling/rebooting & removing all Mozilla folders after uninstalling -- still no luck

    How long does firefox.exe stay in task manager? (Indefinitely, or does it disappear after a time?)
    Also, could you check other 32-bit applications to see if they load? (Are you able to access the 32-bit version of Internet Explorer?)

  • Aperture 3 will not open in 64 bit mode

    Currently running Aperture 3.0.2 (fresh install of trial version with serial number purchased online) on the latest update of Snow Leopard (2.5 GHz MBP). Today, for no apparent reason, I was unable to open Aperture in it's native 64 bit mode. I immediately receive the error message below. I am; however, able to open it up in 32 bit mode. The only recent change was the addition of Adobe CS4 Production Premium. Any thoughts?
    4/4/10 3:51:56 PM [0x0-0x6a06a].com.apple.Aperture[578]
    dyld: Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    4/4/10 3:51:56 PM [0x0-0x6a06a].com.apple.Aperture[578]
    Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
    4/4/10 3:51:56 PM [0x0-0x6a06a].com.apple.Aperture[578] Reason: no suitable image found. Did find:
    4/4/10 3:51:56 PM [0x0-0x6a06a].com.apple.Aperture[578] /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    4/4/10 3:51:56 PM [0x0-0x6a06a].com.apple.Aperture[578] /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
    4/4/10 3:51:56 PM com.apple.launchd.peruser.501[120] ([0x0-0x6a06a].com.apple.Aperture[578]) Job appears to have crashed: Trace/BPT trap
    4/4/10 3:51:56 PM ReportCrash[579] Saved crash report for Aperture[578] version ??? (???) to /Users/Jeff/Library/Logs/DiagnosticReports/Aperture2010-04-04-155156Jeff-Hylands-MacBook-Pro.crash

    http://www.charlessoft.com/
    Used pacifist to extract the relevant files (missing) from the Aperture 3 DMG

  • LR 2.5 64 bit will not open catalogs from LR 2.5 32 bit

    I just upgraded my PC from XP (32 bit) to Windows 7 (64 bit) and have changed LR (version 2.5) from 32 bit version to 64 bit version in the process
    I have used LR 2.x for a long time on my old system, and had created a good archive structure with LR catalogs for each year on an external drive + had one for the current year on my computer.
    After the upgrade, LR will open the one catalog that was stored on my computer (but now transferred to the same disc as the archive structure), but not the catalogs in the archive structure. The error message says that the archive catalogs are not writable - even if these catalogs are exactly the same and have been made in the same LR version as the one catalog that will open.
    What's wrong here, and - most impotantly - what's the trick to fix it?
    Here is the error message that I am getting on the archive catalogs:

    While you are NOT running Lightroom, look in the directory where your catalogue is located and check to see if a file with a ".lock" extension is there. If so, delete it and then try running Lightroom again. That file is created when Lightroom starts and is deleted when LR exits. It prevents two copies of LR from accessing the catalogue simultaneously. If LR crashes, that file can be left on disk, preventing access.
    Hal

Maybe you are looking for

  • Cannot work with two Swing app. at the same time.

    Hi guys, I bring this problem here may somebody experienced that. I developed two client side applications(applets). Locate them on Apache/Tomcat. There is also a Index.html file with two links, so when user clicks on each link the associated applica

  • ATI Radeon HD 4870 - Bootcamp & Catalyst Control Center

    Hey all, I installed Bootcamp (Vista 64-bit) 5 min ago and noticed that Catalyst Control Center was not there. When installing Bootcamp on my MacBook Pro I got the Nvidia panel, why is not the CCC available on the Mac Pro?

  • [BOXI 3.0] DeskI Documents in InfoVIew - no View Menu - PDF Mode

    viewing DeskI reports in InfoView I can set my preferences for "default view format" to "Web" , "PDF" or "Desktop Intelligence format". If I set it to "Web" then after viewing a DeskI document if I click on the View menu I only get options for "Page

  • Can't connect to Lotus Notes server

    Hi, I have the following simple message code: import java.io.*; import javax.mail.*; import javax.mail.internet.*; import javax.activation.*; public class SendMail { public static void send(String smtpHost, String from, String to, String subject, Str

  • Error message after I download Adobe PDF program.  Can't open.  Help.

    I Just downloaded the Adobe PDF trail program.  I tried to run/open the file I get a message "is not a valid win32 application." I am on Windows. Let me know please. Thanks.