CS4 601 Unrecoverable Indexing Error in INDEXING.RPLN

I have a 100 page document with indexes.
It appears to be having indexing problems. With at least one index entry, when I try to delete that index, Indesign just crashes in the INDEXING.RPLN module.
If I try to output the file to an INX file to reload, it again crashed in the StackHash_fd00 module.
When I open the indd file, it allows me to attempt to "recover" the file, but later just says, "the file may be damaged."
This file has problems under XP and Vista.
Worst, case, is there any way to delete all the index entries and start again?
Any ideas?
SC

OK. I have even gone so far as to delete all the pages in the document (so I can preserve my Master Pages) and save as a TEMPLATE.
Now if I open that new template file, and check on indexes, I still have the full set of indexes (but no pages or text). It will still generate a full index bases on ZERO pages. There is one particular index entry that will crash INDESIGN CS4 601 100% of the time when I try to delete it.
I tried to remove all indexes from the document with a find/replace using the pullout menu item of index entry (^I) but it returns NOT FOUND.
Is there any way to just kill off the index? Argh!

Similar Messages

  • Encore CS4 I received this error message: PrimoBurnerSDK -unkown error.

    Under the Windows 7 Ultra OS, when I loaded Premiere Pro CS4, I received the following error message and thereafter when I tried to write a DVD with Encore CS4 I received this error message: PrimoBurnerSDK -unkown error.
    I know the Burner is working properly because it is able to burn DVDs with Adobe Premiere Elements 9.
    The Premiere Pro CS4package worked alright under the Window Vista OS.
    What can I do to correct this problem?
    Adobe Device Central CS4
    Error:
    Error 2.
    Adobe Dynamiclink Support
    Error:
    Error 2.
    Adobe Dynamiclink Support
    Error:
    Error 2.
    Adobe Encore CS4
    Error:
    Error 2.
    Adobe Encore CS4 Codecs
    Error:
    Error 2.
    Adobe Encore CS4 LangPack (en_US)
    Error:
    Error 2.
    Adobe Extension Manager CS4
    Error:
    Error 2.
    Adobe Media Encoder CS4
    Error:
    Error 2.
    Adobe Media Encoder CS4 Additional Exporter
    Error:
    Error 2.
    Adobe Media Encoder CS4 Dolby
    Error:
    Error 2.
    Adobe Media Encoder CS4 Exporter
    Error:
    Error 2.
    Adobe OnLocation CS4
    Error:
    Error 2.
    Adobe Output Module
    Error:
    Error 2.
    Adobe Premiere Pro CS4
    Error:
    Error 2.
    Adobe Premiere Pro CS4 LangPack (en_US)
    Error:
    Error 2.
    Adobe Premiere Pro CS4 Third Party Content
    Error:
    Error 2.
    LangPack (English) for DeviceCentral
    Error:
    Error 2.
    Photoshop Camera Raw
    Error:
    Error 2.

    As a test, tell Encore to create an ISO on your hard drive, then use the free http://www.imgburn.com/index.php?act=download to write to disc
    If that works, the problem is some other software that is "hijacking" your burner so Encore can't properly "talk" to it to burn

  • If am trying to open Indesign cs4 files am getting error plugins required

    i have Adobe Indesign cs4, If am trying to open Indesign cs4 files am getting error plugins required, following plugins are required SCOTCH ROLES.RPLN, SANGAM SERVICER - MAPPER.RPLN, OTICAL KERING.RPLN etc
    After pressing ok again am getting error

    Go to Help > Configure Plugins... and make sure those listed in the first screen are listed and have a checkmark next to them to indicate they are active. That may fix the dictionary problem as well.
    You may also need to reset the prefs. See Replace Your Preferences

  • Windows 7 Production Premium CS4 language pack installation error + solution

    Ok. Long story short...(For solution scroll all the way down)
    Tried to install ubuntu next to my windows vista. Next day I found myself wondering in store searching for windows 7 because Ubuntu install ruined something somewhere inside my computer and neither one of my OS were not starting at all...
    Ok. So I purchased Windows 7 with smile in my face and happiness in my soul! Now it´s clean installed and working and I have to say it is much better than Vista was...
    Already installed 3d max 2009 and couple of other old programs and works like charm and softwares are starting fast!
    ...BUT
    Today I tried to install my wonderful CS4 Production Premium package to this computer. All went well all the way to the end report where it said something like "installation error" and then there was few products or files on the list which it was unable to install...(I can post the exact list tomorrow when I try to uninstall and then again install suite the fourth or fifth time in a row.) After error report I was really worried. First I tried to start Photoshop and all I got was error report "some of the application components are missing from the application directory. Please re-install the application." Then I tried Illustrator and the message was "the localized resource files for this application could not be loaded. Please re-install...blah blah..." When I try to open Onlocation I get windows error "Adobe Onlocation has stopped working." Bridge and Media Encoder are working! But when tried to start After Effects, Premiere and Soundbooth it just opened the serial key window. When I write the serial from my dvd-box backlabel it gives me the nice big red X and says that my serial is not valid. But my serial was really valid just a while ago when I started to install these softwares! Oh please NO!
    Ok. So...Questions shortly:
    How to get my Production Premium installation work in Windows 7 and get back to work?
    How to de-activate my softwares after computer breakdown or user stupidity leading to computer breakdown so I can use my softwares again?
    EDIT:
    Well...This is what I got from the error report:
    Adobe After Effects CS4 LangPack (en_GB)
    Error:
    Error 2.
    Adobe Encore CS4 LangPack (en_GB)
    Error:
    Error 2.
    Adobe Flash CS4 Extension - Flash Lite LangPack Common
    Error:
    Error 2.
    Adobe Flash CS4 Payload LangPack (en_GB)
    Error:
    Error 2.
    Adobe Illustrator CS4 LangPack (en_GB)
    Error:
    Error 2.
    Adobe OnLocation CS4 LangPack (en_GB)
    Error:
    Error 2.
    Adobe Photoshop CS4 International English Language Pack
    Error:
    Error 2.
    Adobe Photoshop CS4 International English Language Pack_x64
    Error:
    Error 2.
    Adobe Premiere Pro CS4 LangPack (en_GB)
    Error:
    Error 2.
    Adobe Soundbooth CS4 LangPack (en_GB)
    Error:
    Error 2.
    LangPack (British) for DeviceCentral
    Error:
    Error 2.
    Tried installing different language but it still won´t work...
    Can´t install it in safe mode and installing trough troubleshooters different windows versions won´t work either...
    Any ideas anyone?
    EDIT:
    Tried creating .nrg dvd-images with Nero and installing from harddrive instead of dvd-discs but still no luck. So problem is not in my dvd-drive or discs...
    EDIT:
    SOLUTION...
    Adobe support answered to my question. I was missing a DOCUMENTS folder from my USERS - PUBLIC path and after I created that and un-installed & installed my production premium package, everything worked like it should! You might encounter to this same problem also if your USERS - PUBLIC - DOCUMENTS folder has some security settings on... Just right click the folder, choose security and check full control in permissions and remember to sign in as administrator when you install any software...
    Hope this tip is helpful!
    Now...Back to work!

    WOH, just what I needed.
    My problem was, that I have moved my documents to another partition, but the public parts I unfortunaly don't had thinked about. . This was 'the solution'! Thank you J_Suhonen!

  • Error code = 601; message="An Error happened during call of MaxDB Tool sdbi

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

  • I had to reinstall CS4 and now have error messages when opening bridge and photoshop

    The error message is "The specified module could not be found. C:\Program Files (x86)\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL

    I tried what you suggested and it did not help.  whenever I try to open either photoshop or bridge, I get a message saying that there was a problem loading scripts the last time that Bridge was open and do I want to try loading them again?  If I click yes, I get that same error message that I reported in my original question and photoshop/bridge will immediately close.  If I click no, photoshop and bridge will open but it will not let me open a raw format document.  It seems like Adobe Camera Raw is not being recognized.   One of the updates I downloaded was an update to Adobe Camera Raw so the functionality is there, it just can't be accessed.  do you think I should try to uninstall and re-install Photoshop again?
    Date: Mon, 3 Sep 2012 19:48:31 -0600
    From: [email protected]
    To: [email protected]
    Subject: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        Re: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Go To Help->Updates and install the latest update. It should work.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670793#4670793
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670793#4670793. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Adobe Photoshop CS4 English Language Pack Error: Error 2.

    I've read another post indicating this error upon install of CS4. Many of the factors described do not fit my scenario, so I thought I'd post this again.
    Basically, I have Win XP SP3 all updates applied. Minimal services running. No software firewall. Everything installed just fine from Production Premium CS4 EXCEPT Photoshop. Error shown in subject line of this post is issued by installer.
    Photoshop won't boot stating it is missing files from it's folder.
    Wazzup?

    OK. This error drove me nuts and I have seen a thousand different "solutions" posted on various forums (none of which actually worked), but I think I found the magic bullet for this problem. This appears to be a result of corrupted/missing language pack files. Here's what I did to resolve it once and for all!
    You should already have a folder somewhere with the contents/Setup.exe for CS4 Design Premium
    Download the trial version of Adobe Photoshop CS4 Extended
    Unpack the contents to a folder/directory somewhere on your PC
    You will NOT be installing the Photoshop CS4 Extended application - only copying some files.
    Copy the "extensions" folder from Photoshop CS4 Extended, that you just downloaded to your CS4 Design Premium folder (there should be an "extensions" folder already there as well)
    Select yes if prompted to replace existing files/folders.
    Double-click the Setup.exe in your CS4 Design Premium directory and re-start the installation of Photoshop from there.
    Problem should be solved.

  • Need to download - design premium CS4 - I'm getting error: 150:30 when I try to open PS

    I had CS help me a few months ago to re-set or load my CS4 Design Premium, when I changed 2008 imac to Mavericks.  Now I can't remember how we did that.  Now the issue is that I need to do the same on my new Macbook pro (also Mavericks)- Somehow the Suite seems to have loaded all programs, and clicking on one says to restart and then says " but if that doesn't work, then reach support." so here I am.  Can someone help asap?  Second question today.  thanks

    Hi madsea,
    There could be issues while loading CS 4 on Mavericks due to incompatibility of OS and software. Please check out the system requirements for CS4 from the link mentioned below.
    System Requirements : System requirements | CS4, Point Products
    For Error -150 : 30 | Error "Licensing has stopped working" | Mac OS
    You can certainly try if it works for you. Links for download and installation are mentioned below.
    Download : Download CS4 products
    Install : Install CS4 products | Windows, Mac OS
    Thanks,
    Atul Saini

  • My Photoshop CS4 has stopped working - Error 148:3 (Licensing has stopped working).....help!

    My Photoshop CS4 has stopped working - Error 148:3 (Licensing has stopped working).....help please?
    I've not changed anything since the last time I used it but it's just refusing to work.

    Ed,
    It seems that there might be some gremlin in the licensing module. The PS CS4 board has several similar instances. I do not know exactly what the problem is, but this should be an easy reset by Adobe. It has worked for the PS users and requires one free telephone call. I am with Harm on this. I doubt that many, if any, users can be of much help. The installation issues *used* to be simple and quick, but I have not had to make that call, since Illustrator 3. Have your S/N handy. If you purchased from the Adobe Store, a receipt # might come in handy too. Once your product has been verified, you'll probably be asked to enter a key, and away you go.
    Good luck,
    Hunt

  • I have photoshop cs4 getting 150:30 error, using macbook air and mountain lion  solution?

    i have a macbbook air(2013) using mountain lion  10.9.2  i have photoshop cs4 and now get error 150:30(license error),  i tried looking to delete flex net program but i don't seem to have it. how do i resolve this?

    Please refer:
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
    Regards,
    Ashutosh

  • I have purchased a new Mac power book 10.9.2.  I cannot open illustrator CS4 and get the error message 150:30.  Can you help?

    I have purchased a new Mac power book 10.9.2.  I cannot open adobe illustrator CS4 and get the error message 150:30.  Can you help?

    You are welcome, Sharon.
    You should be aware that the newest version, CC, is only available as a subscription.
    CS6 can be purchased at Adobe, or second hand, see below.
    Older versions such as CS5 can only be bought second hand, with a licence transfer through Adobe, requiring that the licence has not been used as a basis for an upgrade.

  • Dreamweaver CS4 Mac – non-startup – Error: 150:30

    Hi, any help would be appreciated.
    Dreamweaver CS4 Mac – non-startup – Error: 150:30
    "Licensing for this product has stopped working". Transferred to new computer via Time Machine back-up.
    Thanks

    See if anything here helps: https://helpx.adobe.com/creative-suite/kb/error-licensing-product-expired-cs4.html

  • I cannot start my cs4 program I get error message 148:3  can someone please help

    I cannot start my cs4 program I get error message 148:3  can someone please help

    Which operating system are you using?
    If it's windows:
    Error "Licensing has stopped working" | Windows

  • 601 internal battery error

    I own a HP Probook 4420s. I've been getting the 601 internal battery error, so Im ready to replace it. Can anybody let me know where I can find one?
    This question was solved.
    View Solution.

    Hi,
    The 601 error relates to your notebooks main battery ( not the cmos cell as the message suggests ) - there are many retailers, including HP, where you can purchase a replacement such as the example on the following link.
    http://www.amazon.com/Compaq-Probook-Battery-4400mAh-Replacement/dp/B004Z6A8KM
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Unrecoverable bootloader error

    Unrecoverable bootloader error Intermittent problem resolved sometimes by forced power off and power on with vol + held down. Takes alot of tries. Question is that if if is intermittent can the problem be corrected by other than sending to Toshiba. Bought used and do not have warrenty. Thanks

    I need help with my Toshiba Thrive!!! I havent had it a week and it will boot up but when I click on the Apps they show up blank. I tried to reset it back to the factory settings by holding the volume and power but when I do I get the unrecoverable bootloader error message. Someone please help me I dont want to send my tablet back and wait on another one

Maybe you are looking for