CS4 : Accessing points on a Curve from keyboard

No problem in earlier versions (Control-Tab, or Control Shift Tab), unable to do so in CS4 on my MacIntel running 10.5.5. Trying to get acquainted with this version installed on an external drive on which my system is cloned.
And while I'm at it, there used to be a checkbox in PS CS3 preferences to launch Bridge, is it anywhere to be found?

> TAT-like tool
What is TAT? Google didn't help.
Acronym Definition
TAT Tattoo
TAT Tourism Authority of Thailand
TAT Time After Time (song)
TAT Turn Around Time
TAT Thematic Apperception Test
TAT Tapas Acupressure Technique
TAT Tyrosine Aminotransferase
TAT The Astonishing Tribe (Sweden)
TAT Tiffani-Amber Thiessen
TAT Technical Assistance Team
TAT Thrombin-Antithrombin Complex
TAT Transactivator of Transcription (HIV protein)
TAT Total Air Temperature
TAT Tired All the Time (medical shorthand)
TAT Tetanus Antitoxin
TAT Theoretical Arrival Time
TAT Three Affiliated Tribes
TAT Transient Accommodations Tax
TAT Touraine Air Transport (airline)
TAT Ti Amo Tanto (Italian: I love you a lot)
TAT Testing and Training (SW Development and QA Testing)
TAT Trans-Atlantic Telephone cable
TAT To Accompany Troops
TAT Transitional Automated Ticket (airlines)
TAT Transport Aérien Transrégional (French: Regional Air Transport)
TAT Tactical Analysis Team
TAT Tatry/Poprad, Slovakia - Tatry/Poprad (Airport Code)
TAT Trans-America Trail (off-road jeep/motorcyce trail)
TAT Termination Attempt Trigger
TAT Technical Assessment Team
TAT Truth and Transmission (Foundation)
TAT Terrorist Action Team
TAT Technology Applications Team
TAT Test Auto Test
TAT Tyumen Avia Trans
TAT Totally Antisymmetric Tensor
TAT Two-Axis Tracking
TAT Transgenic Arthropod Team
TAT Teenage Travelers (Family Motor Coach Association)
TAT Teens Against Television
TAT Totally Awesome Trip (slang)
TAT Tactical Airlift Technology
TAT Timed Automata with Tasks
TAT Test Analysis Table
TAT Time for Average Turnaround
TAT Transportation and Ammunition Tracking
TAT Thermally-Activated Time-Dependent (reliability model)
TAT Turbine Air Temperature
TAT Text Attribute Table
TAT Toshiba Authorized Technician

Similar Messages

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

Access point associated and deassociated from WLC

HI,
i have 3 AP AIR-LAP1042N-E-K9 in the same place (Event at down town) but they Sometimes the APs even disassociate from the controller temporarily, and i see the below errors on Prime infrastructure 2.0
Load threshold violation reported by 802.11b/g/n interface of AP <apname>, connected to controller <controllerIP>
Interference threshold violation reported by '802.11b/g/n' interface of AP
Coveraged threshold violation reported by 802.11b/g/n interface of AP <apname>, connected to controller <controllerIP>
what these problems and how to solve it
Thanks,
Ahmed

After these error done i see that error 802.11b/g/n interface of AP is down :controller.
please as example up time is 4:00 hours and join time changed every time may be once 12 m:15 sec, may be in another time 1h:15 m:20s
please feed me back these problem related to number of connected client because i monitor when the client exceed on AP more than 25 the AP deassociated from WLC. kindly find loggs from AP. wait your feed back.
*Mar 1 00:00:11.913: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:11.916: *** CRASH_LOG = YES
Security Core found.
Base Ethernet MAC address: 6C:20:56:48:E7:59
*Mar 1 00:00:13.876: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:14.758: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:14.761: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:15.891: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:18.795: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 04:03 by prod_rel_team
*Mar 1 00:00:18.796: %SNMP-5-COLDSTART: SNMP agent on host 90013-03 is undergoing a cold start
*Mar 1 00:00:18.868: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:18.868: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:19.865: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:20.214: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:46.958: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:50.510: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:51.533: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:52.335: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.35.49.35, mask 255.255.255.248, hostname 90013-03
*Mar 1 00:00:52.533: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:52.559: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:53.559: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:03.221: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:01:13.236: %CAPWAP-3-ERRORLOG: Selected MWAR 'RMS-WLC1'(index 0).
*Mar 1 00:01:13.236: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec 9 09:54:50.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.94.70.2 peer_port: 5246
*Dec 9 09:54:50.919: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.94.70.2 peer_port: 5246
*Dec 9 09:54:50.920: %CAPWAP-5-SENDJOIN: sending Join Request to 10.94.70.2
*Dec 9 09:54:50.929: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Dec 9 09:54:50.929: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Dec 9 09:54:50.929: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Dec 9 09:54:50.930: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.94.70.2
*Dec 9 09:54:51.300: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 9 09:54:51.355: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 9 09:54:51.413: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller RMS-WLC1
*Dec 9 09:54:51.464: ac_first_hop_mac - IP:10.35.49.33 Hop IP:10.35.49.33 IDB:BVI1
*Dec 9 09:54:51.464: Setting AC first hop MAC: e804.62dc.9922
*Dec 9 09:54:51.464: ac_first_hop_mac - IP:10.35.49.33 Hop IP:10.35.49.33 IDB:BVI1
*Dec 9 09:54:51.464: Setting AC first hop MAC: e804.62dc.9922
*Dec 9 09:54:51.465: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 9 09:54:51.595: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Dec 9 09:54:52.300: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 9 09:54:52.383: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Dec 9 09:54:52.388: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Dec 9 09:54:52.464: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Dec 9 09:54:53.377: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec 9 09:54:53.409: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 9 09:54:53.416: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Dec 9 09:54:53.421: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Dec 9 09:54:54.409: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Dec 9 09:54:54.416: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 9 09:54:54.442: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 9 09:54:55.443: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Dec 9 10:26:53.849: %WIDS-4-SIG_ALARM: Attack is detected on Sig:Standard Id:5 Channel:11 Source MAC:905f.2e62.e7a9
*Dec 9 10:32:20.938: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_WTP_EVENT_REQUEST
., 2)
*Dec 9 10:32:20.938: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Dec 9 10:32:20.938: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.94.70.2:5246
*Dec 9 10:32:20.994: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
*Dec 9 10:32:20.997: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Dec 9 10:32:21.038: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Dec 9 10:32:21.039: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Dec 9 10:32:21.041: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 9 10:32:21.113: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 9 10:32:19.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.94.69.2 peer_port: 5246
*Dec 9 10:32:19.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 9 10:32:19.927: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.94.69.2 peer_port: 5246
*Dec 9 10:32:19.928: %CAPWAP-5-SENDJOIN: sending Join Request to 10.94.69.2
*Dec 9 10:32:19.939: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Dec 9 10:32:19.939: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Dec 9 10:32:19.939: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Dec 9 10:32:19.939: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.94.69.2
*Dec 9 10:32:20.093: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Dec 9 10:32:20.098: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Dec 9 10:32:20.370: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller UTO-WLC1
*Dec 9 10:32:20.424: ac_first_hop_mac - IP:10.35.49.33 Hop IP:10.35.49.33 IDB:BVI1
*Dec 9 10:32:20.424: Setting AC first hop MAC: e804.62dc.9922

LWAPP access points are unregistering from the controller

Our wireless controller network designed with one 4402 controller and 30 LWAPP 1000 series access points.
all lwapp access points are suddenly unregistering from the controller and registering with controller after few minutes. It was happen randomly 2 to 4 times in a day.
I am adding the attachment of log file please help me anyone know identified this problem.
Thanking you,
Regards,
Ranga Kishore
9959344436

Hi,
What's the specific model of your 4402? How many access points do your controller support?
Can you also check if the uplink or distribution ports on your WLC goes up and down. Thanks.
Regards

Wrt54g as a wireless access point

alright i recently changed around my configuration with my wrt54g wireless router. I have made it into an access point which i was unaware is better. Im kinda new to the networking deal though it is what i want to do as a career and access points are new to me. so to the point of this post... when i make it an access point instead of the router i cannot access the admin setup page anymore. I know that when its the DHCP server you type in the default gateway that your given and the admin page pops up... well when its just an access point the gateway is from your router box not the linksys. so how if at all possible am i able to access the setup for the linksys if say i wanted to change the SSID of my network? i appreciate any help
Solved!
Go to Solution.

It depends. If you have another gateway router then you should assign a LAN IP address inside the gateway router LAN. For instance, if your gateway router uses 192.168.0.1/255.255.255.0 then you could assign a LAN IP address of 192.168.0.2/255.255.255.0, turn off the DHCP server and do the LAN-LAN connection.
If you only have a simple modem and the computers make a direct connection to your ISP then you have to set up a static IP address temporarily. Assuming you did not change the LAN IP address of the WRT from 192.168.1.1/255.255.255.0 you would assign a static IP address 192.168.1.2 with subnet mask 255.255.255.0 on the computer. With this static IP address the computer can access http://192.168.1.1/ After that you change the computer back to DHCP (Retrieve IP address automatically).

Determining which wireless access point a computer is connected to?

Apologies if this is posted in the wrong forum...
I am working in a large open space where there are multiple overlapping wireless access points -- not Airports but from another vendor. Unfortunately, several computers are experiencing wireless performance and dropout issues. I think the problems may be because the laptops (both PCs and Macs) are connecting to a more distant access point across the open space which is more "line of sight" than the closer access point. We can't confirm this theory, however, because I can't pinpoint which access point we're connecting to. This is possible with a PC, but I can't find such a piece of software for my PowerBook. Is anyone aware of such a utility?
Thanks so much.
Brita

Air Traffic Control widget. Search the download section for this useful widget. This widget lists all wi-fi access points, shows what channel each one is on, what the signal strength is and some vendor information.
Whichever access point you are connected to is listed in italic on the list. I like the fact that it is a widget as it makes it very easy to access.

Access point not work correctly

Hello everybody, I have a problem in my BlackBerry Passport. I can't turn on "access point" function,this function not work. Does this function work in the future OS updates?
P.S access point give your internet from the mobile network to your WiFi

Hotspot does work on all versions of BlackBerry 10 OS and all BB10 models. It is, however, controlled by your carrier. If it won't turn on you have one of several possible problems:
1) Your mobile data is off or not working.
2) You need to have Hotspot provisioned on your account by your carrier.

Back-up via another access point

Hi I was wondering if it is possible to use another access point to back up from, rather than connecting directly to the time capsule, we have 3 access point routers in our house (all connected to 1 network), to provide adequate signal.
So can the back-up be made for example by an upstairs router with the time capsule located downstairs (all connected to the same network)?
If this was possible can the routers be any brand or would they have to be airport by apple?
Thanks

arj123 wrote:
So can the back-up be made for example by an upstairs router with the time capsule located downstairs (all connected to the same network)?
Sure, if you want to replace your TC with another router, it can still function as a client on your network and perform Time Machine backups.
I advocate using all Apple products though, because it eliminates any uncertainty with third party devices not cooperating with one another. Sourcing all your routers and access points from Apple will guarantee success.

Finding the manufacture date on an access point via software

I'd like to determine the manufacture date of our access points because we plan on converting to LWAPP? Can someone tell me the what CLI command to use and which field has the answer. thanks.

Hi Thomas,
Not sure about finding the Manufacture date (maybe you are trying to find out about the presence of a MIC certificate) but we did go through this coversion from Autonomous to Lightweight on our infrastructure last summer.In this process we did convert about 70 1121's and 1231's to LWAPP and it worked very well. Here are some relevant docs;
Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
From this excellent doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html
The following Cisco Aironet access points have the ability to operate as autonomous access points or lightweight access points:
Cisco Aironet 1240 AG Series Access Points
Cisco Aironet 1230 AG Series Access Points
Cisco Aironet 1200 Series Access Points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)
Cisco Aironet 1130 AG Series Access Points
Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)
Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R).
From this doc;
http://www.cisco.com/en/US/products/ps6521/prod_bulletin0900aecd80321a2c.html
Guidelines and Tools for Migrating to the Cisco Unified Wireless Network
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd804f1a23.shtml
Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs
LWAPP secures the control communication between the AP and the WLC by means of a secure key distribution. The secure key distribution requires already provisioned X.509 digital certificates on both the LAP and the WLC. Factory-installed certificates are referenced with the term "MIC", which is an acronym for Manufacturing Installed Certificate. Aironet APs that shipped before July 18, 2005, do not have MICs. So these APs create an SSC when they are converted to operate in lightweight mode. Controllers are programmed to accept SSCs for the authentication of specific APs.
http://www.cisco.com/en/US/products/ps6521/products_configuration_example09186a00806a426c.shtml
LWAPP Upgrade Tool Troubleshoot Tips
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Also, 5 points for Eric! For all your great work here lately.
Hope this helps!
Rob

Configure Access point 1140

Dear All,
I am not expert in wireless and cisco. I need to configure accesspoint 1140 in my network. I have 10 vlans in my network (Switch 2960)
how i can configure accesspoint to used two ssid, one for lan and one for guest this two ssid in separate vlans. I was try like this...
i create vlans on 3750 switch. I connected my accesspoint to switch 2960 (2960 switch is enduser switch). I trunk the port on 2960 switch is connected to access point. I assign ip address to BVI Interface in accesspoint static. i am unable to ping from access point to other vlans, from other vlans to access point.
can any one help to configure access point.
regards.,

Basic Wireless LAN Connection Configuration Example
http://www.cisco.com/en/US/customer/tech/tk722/tk809/technologies_configuration_example09186a008055c39a.shtml

Connection via access point to my pc via Bluetooth

Pls, kindly guide me on how to connect my laptop to the network access point on the new c2-00 nokia via bluetooth. I have been trying, but couldnt get through. My pc did not see any network device, with the bluetooth on. Is that not because it is dual sim? Pls, guide me. Anticipating positive response.

Hub_apprentice wrote:
Thank you John46. You have clarified the settings that I need to plug in to the access point. Just to confirm re the channel I need to set the channel on the access point to be different from the BT Hub.
Your assistance is much appreciated
I think you meant me.
Make sure that the home hub is set to a fixed wireless channel, not smart wireless. Try 1,6 or 11.
See http://bt.custhelp.com/app/answers/detail/a_id/14094/kw/change%20wireless%20channel/c/346,407,410
Set the additional access point to one of the other two frequencies. So if the hub is on 6, put the access point on 1 or 11.
This gives plenty of separation without any overlap.
If you read my document, you will see that I recommend setting the IP of the access point to 192.168.1.15, to avoid the DHCP range of the home hub.
Keith
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Configuring Cisco Air 1142N Access point.

Hi Guys
I have been struggling to configure a cisco airnet AIR-LAP1142N-E-K9 access point.
this is not my first time as I have configured similar accesspoints before.
the access point gets an IP from the dhcp server. I can ping the access point over the network.
However, when I type in the ip in the web browser, nothing comes up. there is no proxy issue.
the console(hyperterminal, connected through serial cable) shows the following error message:
%CAPWAP-3-ERRORLOG: COULD NOT RESOLVE CISCO-LWAPP-CONTROLLER
Many thanks
Mo

Hi,
2106/12/25 will support 7.0.xx code. It will also support all existing APs including 3500,1140,1040.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html
I don't think it is EOS atleast does not say on the website :
http://www.cisco.com/en/US/products/ps7206/prod_eol_notices_list.html
Deciding on whether you need a WLC or not is upto your budget and what features you need on your Wireless Infrastructure.. If you have $$ to spend I would recommend going in for 2504. If not you can configure them in standalone and you can always buy a WLC based system in future given you only have 3 APs.
If you need IOS code, you can either approach
1) Your reseller or
2) Cisco SE
3) Call TAC support and ask CIN agent to grant access to CCO code based on what you purchased. Also explain your situation.
Link: http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html
You can also follow this thread to upgrade :
https://supportforums.cisco.com/message/3477595#3477595
Thanks..salil

Access point are not coming up after upgrade image of WLC

Hi,
I have AIR-WLC4402-50-K9 WLC i that current IOS is 7.0.98.218 and i upgraded with 7.0.116.0 IOS but after upgrading and reboot the WLC from 15 access point 3 access point are not coming up and 12 are coing up and working fine (4 1142 and 11 1131 series access point) 3 which are not coimg is 1131 series access point. when i login with console to 3 access point its rebooting 2 times and coming on ap: prompt.
In between that i reloaded the WLC one more time because from 15 acess point only 4 aceess point are came up and i also cleck the show boot on wlc its output is
7.0.116.0 (default)
7.0.98.218 (active)
so i reload the wlc and checked out of 15 acess point now 12 acess point are up and still 3 are not. And i also checked the output of show boot command its
7.0.116.0 (default)(active)
7.0.98.218
So i things its because of when 2nd time i reload the wlc the remaining 3 access point are getting image from wlc but because of reload its connection should be loss and error loading flash error are coming on acess point.
After that i recover the IOS for access point and convert into autonomus and from autonomus convert into Leightweight Access point. I also attached the procedure for recover the ios of access poing
But my question is why this 3 access point are not coming up is this happen's after upgrading wlc can any one please send me Step by Step WLC S/W Upgrade' process and if this this happens some time please send me any doccument related to this.

Sunil,
When you rebooted the controller did you do it from the Web GUI, the CLI, or did you physically reboot the controller? I believe and maybe incorrect but if your getting the ap: < prompt > that means that there is no firmware on the unit. If you have restored these to functioning autonomous unit and then re-converted them to Lightweight and it's still happening then we need to look at a debug output of what is happening when those AP's attempt to join the controller.
The capture you attached shows that it appears to join the controller and get a config, but are you saying that when it reboots again it stops working?? the other thing I would reccomend is clear out the flash memory since your capture shows the possibility that there are several copies stored there.
Hope this helps.

Setting time on 1130AG series Access Point

I noticed on one of my clients AP's which is an 1130AG series that it had a setting for SNTP. I was a little surprised that it did not have the capability to use regular NTP.
The SNTP servers configured for the AP were two Cisco routers.
Is this a common configuration? Is there a way to upgrade so that the AP's can use NTP?
The current code on the AP is 12.3(8)JA.
Thanks
Kevin

Hi Kevin,
The commands for this changed from NTP to SNTP somewhere in the 12.2.x releases, so "older" AP IOS's did support NTP. Here is some info for 12.3.(4)JA;
Managing the System Time and Date
You can manage the system time and date on the wireless device automatically, using the Simple Network Time Protocol (SNTP), or manually, by setting the time and date on the wireless device.
Simple Network Time Protocol (SNTP) is a simplified, client-only version of NTP. SNTP can only receive the time from NTP servers; it cannot be used to provide time services to other systems. SNTP typically provides time within 100 milliseconds of the accurate time, but it does not provide the complex filtering and statistical mechanisms of NTP.
You can configure SNTP to request and accept packets from configured servers or to accept NTP broadcast packets from any source. When multiple sources are sending NTP packets, the server with the best stratum is selected.
If multiple servers are at the same stratum, a configured server is preferred over a broadcast server. If multiple servers pass both tests, the first one to send a time packet is selected. SNTP will only choose a new server if it stops receiving packets from the currently selected server, or if a better server (according to the above criteria) is discovered.
Configuring SNTP
SNTP is disabled by default. To enable SNTP on the access point, use one or both of these commands in global configuration mode:
sntp server {address | hostname}
[version number]
Configures SNTP to request NTP packets from an NTP server.
sntp broadcast client
Configures SNTP to accept NTP packets from any NTP broadcast server
Enter the sntp server command once for each NTP server. The NTP servers must be configured to respond to the SNTP messages from the access point.
If you enter both the sntp server command and the sntp broadcast client command, the access point will accept time from a broadcast server but prefers time from a configured server, assuming the strata are equal. To display information about SNTP, use the show sntp EXEC command.
Hope this helps!
Rob

Curve 9320 : lost "access point option"

Hi !
First sorry for my bad englis... i'm from france, an there is no blackberry support here.
Yesterday i configured my Curve 9320 to use it as a wifi access point. It did word perfectly untill this morning. As told in user manual, it juste disconnected while beeing not use for severall minutes.
In the middle of the day, every thing about "access point" disapered from my smatphone, even in "connection" options....
Could anybody help me ???
Thanks !
Solved!
Go to Solution.

Hi and Welcome to the Community!
The first thing you should do is contact your mobile service provider...perhaps they have done something to block this from functioning on your device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

CS4 : Accessing points on a Curve from keyboard

Similar Messages

Maybe you are looking for