CS4- Adding a modified audio track to video - help needed ASAP

Hi!
I have an exhibition coming up in a couple of days and I interviewed some people for that, but they all wanted their voices changed.
Now, I imported the avi. file and put it on the timeline. (30 fps [640x480 (1,0)], 11024 Hz - 8-bit Twos-com)
I extracted an audio file in wav, then changed the pitch in audacity and then imported the new audio clip to CS4. But I cannot group or export them in any way. What is going on? What am I doing wrong? I need the video work with modified voices but I can't get it to work. I am losing my mind and running out of time. I would really appreciate any help!
PS: I am a total Premiere noob. So please be patient with me.

But I cannot group or export them in any way.
Not sure that I am following you here. Do you mean that Audacity is not allowing you to Save_As?
Now, if you wish to have all of your Audio Tracks into one WAV file, just do an Export, choosing Export Audio only, by unchecking Export Video. Check that Multiplexing is set to None, where it should default with Audio-only.
Open that file in Audacity, edit as needed, then Save_As, and Import that edited Audio file. Drag it to the Timeline in a clear, Targeted Audio Track of the proper channel-count, and then you can Mute the existing Audio Track(s) in the Audio Mixer, or just turn each Track OFF in the Track Header.
If you mean something else, help me understand what you need to do.
Good luck,
Hunt

Similar Messages

Nokia n8 How to switch audio tracks in video playe...

How to switch audio tracks in video player? and How can I connect an external audio track playback video?

Re: Nokia N8 how to reset to factory settings [ New ]
‎2013-01-16 23:06
Hiiii i hace the same problem i dont have pasaron to hard reset my Nokia 8 and i have a big problem, i cant maje calles , or go to the Home menú, or use wifi, dial aytihing I been having that message saying that there no memory and u have to delete some data, since then just menu screen it works but nothing else please help
HI everyone! I also have the same problem as per above. Please help! Thank you!

How can i use original audio track in video editing for iPad 2?

I am struggling to understand how the video editing apps work for iPad 2, and specifically, to understand why all the editing apps I have looked at explain how you can make these terrific video clips by ADDING audio tracks from iTunes, or. From the audio library. I just want to use the original audio on the tape? Is that so strange? Today I took a video clip of my daughter singing with her guitar. I wanted to shorten the length a bit, so I downloaded a couple of Visio editing apps. When I pulled the clip out of my Camera Roll storage into the video editing screen, there was no sound at all,though there were ways to add other sounds ( for .99cents) most frustrating is that nowhere, does Apple explain this. The tutorials just show someone editing a video of their friends ( with no sound) And adding text and music, as if it's normal not to include the actual sound that originally accompanied the video clip. Seems like i wouldn't be the only customer who would prefer to hear my daughters own voice Ina video of her singing, and would like thisexplainedbefore I started downloading editing apps. If it can't be done, couldn't This be posted?

I am not understanding your question, or your complaint, if it is a complaint.
I movies takes a video clip, including its audio track.
You have the option of mutimg it, or of importing some other sound from your music library, or narrating. What other option do you want?

Exporting mono audio tracks as mono audio tracks with video tracks

hello,
i'm working with dv pal 48 khz digitized files. when i import the files into fcp7, i have a video track and 4 different mono audio tracks. my plan is to modify each individual mono track, after exporting each as aif, editing them, and then importing them back as aif. the problem is that when i've built a sequence with 1 video track and 4 different mono audio tracks, there doesn't seem to be a way to end up with 4 different mono audio tracks like the original, it appears that the only option is to end up with 2 stereo tracks. can someone help me with this, which i'm sure is a very odd problem?
kind regards,
charlie

If you are editing the audio with Soundtrack Pro you can use the "send to" command. It will send your project as a multi-track file so that each track can be editited independently or you can add elements to all four.
If you have Logic, add it to the "external audio editors" list and you can use it in the same way as STP.
x

Aligning audio tracks to video

In Final cut i import my video and audio from my camera. I then export the audio to Garage Band and edit it (i don't change the length of the audio, i just try to make it sound better by adding reverb and EQ) then i export that audio to itunes and then import it back to Final Cut.
I am having problems lining up the two audio tracks in Final Cut. Im working with music video's so the audio and video must be in sync. In garage band there is a feature called "snap to grid" that allows me to slide my track to a desired increment of time. I can choose to "snap to grid" or not. By not "snapping to grid" i am able to line up tracks exactly where i want them. Is there a feature like that in Final Cut. In Final Cut, I need to be able to slide the newly imported track to exactly line up with the original audio.
Any input would be greatly appreciated!!!

Hello Nate
In FCP the "n" key is used to toggle on/off the snapping function.
Question: Why the convoluted workflow? How come you don't just roundtrip your audio out of FCP directly to Soundtrack Pro (instead of GarageBand) and back again?
Best
Andy

Adding slideshow to audio track downloaded from Itunes

I can get to the part alright about adding the slidshow to the audio track but then I can't do anything. I can't save export nada. It is really fustrating as I got it to a point where I like the slideshow but then it just won't save the file. Not at all. I check the info and see the audio and video are there but I can't go any further.

The music downloaded from iTunes is protected and thus you can't export it to another form. You may be able to make a CD from a playlist that includes the tune and then re-inport it that way in unprotected form.

Audio Tracks and Video Out of Sync!!

I am having a problem with not only the video and audio being out of sync, but the audio tracks, left and right, are out of sync with each other. I know it isn't the camera or tape because I watch the footage while it's capturing and it is fine, plus it happens all the time, with different tapes and different cameras. What would cause this and how do I fix it? Also, how do I set my preferences to automatically start the camera when I click capture? I have it set on my iMac but I can't find it on my G5.

I am having a problem with not only the video and audio being out of sync, but the audio tracks, left and right, are out of sync with each other. I know it isn't the camera or tape because I watch the footage while it's capturing and it is fine, plus it happens all the time, with different tapes and different cameras. What would cause this and how do I fix it? Also, how do I set my preferences to automatically start the camera when I click capture? I have it set on my iMac but I can't find it on my G5.

Problems Sycing multiple Audio tracks with Video. Please help

I have a video clip from my Cannon 70D that im trying to sync with 2 seperate audio tracks from my Zoom. One LR stero track and one wireless mic track.
I select all three clips in the event windo and chose SYNC CLIPS from the clip menu. I take the Syncronized clip and place it in the time line , but when i go to expand audio there are only two track available - The scratch audio from the camera clip and what appears to the LR audio from the Zoom. Hard to tell though because Final Cut renames the Audio for me. I did notice that the sample rate on the video and audio files are different. Could that be the problem?

I haven't had much luck with SYNC CLIPS. I suggest you use Multicam instead.
Go to the Inspector and set up your Canon video as Angle 1. Set Zoom XY as Angle 2, and set Zoom wireless mic as Angle 3. Then Select the clips and FILE/NEW MULTICAM CLIP.
http://help.apple.com/finalcutpro/mac/10.1/#ver23c764f1

Premiere not showing all audio tracks in video file?

Hello,
The short version of my issue is that I am not seeing all audio tracks in my imported AVI video. I know they are there, but only one track is showing.
Longer version:
I have an application called Action! that is used for recording games. There is a setting on this application that allows you to record your microphone as a separate audio track. I made a 15 minute video using this. If i play this video in Action!'s media player, i can switch between my game track and my microphone track. If I play the video file in Windows Media Player, it plays both tracks. When I import this video file into Premiere (or Soundbooth) it only shows the Game track and not the microphone track. I cannot find a way to get to the microphone track. It just seems like it doesnt exist. Any thoughts?
Thanks in advance

music from library on drive/aiff

How to edit both audio tracks with video that has two tracks?

I have video that has 2 tracks with it. Both however are marked ch. 1 on the premiere timeline. The properties say they are 48000 hz audio. Now when i hilight both tracks and right click to edit in Audition, only one comes over. I am wondering a few things here. Why are they both the same channel and how can i edit both of them at once since they ae exactly the same in Audition? Do i even need both tracks?

Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?

Removing audio tracks from videos

I have some videos with 2 audio tracks on them (stereo and surround).
Is there any way to remove one of those tracks without converting the video?

It can be done with QuickTime Pro
<http://store.apple.com/us/product/D3380Z/A>
"Show Movie Properties" in "Window" menu, detete the unwanted track, then "Save" in "File" menu.
You may need to install Perian
<http://www.perian.org>

How to synchronize audio track and video when transmitting by RTP

since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

Adding a blank audio track to a .mov file

Hi,
I have a .mov file that I am trying to convert to MPEG-1 for burning to a VCD. I converted two .mov's that had audio in them, but now need to convert three that do not currently have an audio track. (Converting using ffmpegX)
I've created a blank audio file in Quicktime that is longer than any of the .mov's. Is there an easy way to add the audio track from the audio file to the .mov file without one? I could probably do it in iMovie if I can't do it with Quicktime, but would rather avoid that....

Open both files in Quicktime. Select All on the blank audio file, copy, then switch over to the MPEG-1 file.
Make sure the cursor is at the beginning of the film, then select "Add to Selection & Scale" from the Edit menu.
That should do the trick.
All of this, though, only works in QT Pro, which is very much worth it!
Good luck
Dual 2.5 GHz PowerPC G5 Mac OS X (10.4.7)

Converting Audio track from video

My niece has been singing in a choir for the last few years and my brother will post her performances/solos on youtube.com for the rest of the family to see. It has been a great way for us all stay together. I recently saw where you can download videos from youtube into itunes as movies, which I have done on a couple of his posts. What I wanted to know, is if there is a way for me to convert those video files (I think they are mpeg-4) into regular audio or songs? I would like to do this for two reasons, first, I thought it would be a nice way to allow my brother to put some of his daughters songs on his iPod (when I try this on my iPhone the videos are placed in the music folder and they don't mix with my other music), and second I was going to make a CD for our father who doesn't have an iPod.
Does anyone know if there is a way capture the audio from a video file?
Thanks.

Josh,
Good to know. Thanks. Sometimes I get confused on what works in which version. Glad that I do not have to deal with Avid and FCP in the course of the day. I still try to do things in AE, that I do int PrPro, and still get lost with the little differences in the GUI.
Hunt
PS glad that 4.1 is looking good for you! Hope the joy continues.

No sound from some audio tracks ... help!

I am using GB 08 to add music to a movie for a friend's memorial. ( A keynote presentation exported as a QT movie)The Movie itself has no audio, I want to use a variety of songs that blend into each other.
I'm used to doing this with Final Cut, but decided that i should familiarize myself with Garage band this time.
I just added the 10th track and now can't get some of the other tracks to play. It's weird.
Tracks 2, 4, 6, 7, 8, 10 play, but 1, 3, 5, and 8 don't.
(i suppose i could just split the odd tracks and move the sections to the tracks that play, but that wouldn't really give me an answer for this)
I have volume level keypoints where the volume rises and drops, and this action does happen on the volume sliders, and the green levels are visible, but no sound.
None of the tracks are muted or soloed.
Any suggestions for correcting this?
I've closed the program and restarted it and one time everything was fine, until I added that 10th track
thanks for your help
Elizabeth

Okay, thank you, I just tried it
I added a new basic track, it was not muted or soloed.
So i dragged my audio into this new track and it played fine
then i deleted this track and just simply dragged my audio into the composition, as I have been doing, to create it's own new track, which then also played fine, then I deleted this one.
then i added 2 basic tracks (since the problem seems to be with alternating tracks) and dragged music into them and they both work.
so I don't know how to make the problem recur with the new tracks, but the original tracks that I wrote of, still don't play.
Anyway, I've saved it as a version b and have been cutting and pasting the bits of the 'silent' tracks into the good tracks so that they play .... looks a bit like a mosaic but is working so far.
very inconvenient though.
Any more suggestions??

CS4- Adding a modified audio track to video - help needed ASAP

Similar Messages

Maybe you are looking for