CS4: Adobe Encoder encodes 1280x720 with black frame around it...?

Hi there, ripping my hair out trying to figure this one out :\
I have a few film clips that I shot in 1920x1080 with a Canon T1i and edited in Adobe Premiere CS4. I noticed at first that there were large black vertical bars on either side of the preview window, almost as though the source footage wasn't big enough to fit it, but it seemed to be fine when exporting... however, on exporting, I wind up with a video that is my original footage, in 1280x720, inside a black frame that fills the rest of the 1920x1080 specification. Anybody know a fix for this? I'm just trying to encode the film in 1920x1080 with the editing.
Thanks in advance!!!

Nevermind, figured it out
The pixel ratio was in HD Anamorphic 1.33 instead of "square pixels". I'm still getting used to this program, silly thing to overlook
Thanks a million for the help though. Truly appreciated.

Similar Messages

  • Adobe Encoder crash with a r6025 pure virtual function since last update and Aero enabled

    Adobe Encoder crash with a r6025 pure virtual function call when I export most of my sequences (mostly multicam sequences) to it when Aero is enabled. Everything was working fine before the 7.1 update.
    Any solution for that?

    Adobe Media Encoder has its own forum. You might have more success getting help there: http://forums.adobe.com/community/ame

  • How does adobe encoder work with windows 8?  I can't get it to work.

    How does adobe encoder work with windows 8?  I cant get it to work.

    Flash Media Live Encoder doesn't work with Windows 8.
    The best it gets is Windows 7 64 bit.

  • Output only with "black frame"??

    Hi there, I am editing rendered animations from cinema4d, which are in the format 768x480 (image on the right). I´ve been trying everything to export them in exactly that format in QT. I can´t find any export option to get a movie with a screen that is 768x480. Instead it is 720x480 (?), but the moving pictures cover only the center of the final window and leave a huge black frame around it (image on the left). Even if I set compression to "none" (which seems the only way to edit the pixel size of the export format manually) the frame appears (and the movie is in a very bad quality).  I need the movie for a client who will present it on a Windows PC, yet I wanted to finish everything using QT and then convert the final QT into WMV by using QTpro. Can somebody help?
    Thanx
    Premiere Pro CS4 on MAC OSX 10.5.8

    What options does Cinema4D allow, regarding the Frame Size, PAR and CODEC choices?
    I'd suggest exploring those choices, finding the best combo, and then setting your Sequence/Project Preset to match. Note: you may have to use the Desktop (Custom) Preset, and then adjust the various setting to match your Cinema4D footage exactly. Your Sequence/Project Preset (and settings in Desktop Mode) MUST match your source footage 100%, or you will get things like black bars.
    Good luck, and PrPro should be able to accommodate you on the Mac, so long as the Preset matches your source footage, and you should have some control over that source footage.
    Hunt

  • Black frame around video

    I'm shooting video on a Sony FX 1000, widescreen DV.  I upload it into PE fine, frame size 720 x 480.  When I save it to file (in this case, on the hard drive), there is a black frame around the video (see below).  I see it when I play it on Media Player, and also when I upload it to a separate PE file where I want to cut it with other files. 
    A perhaps separate, perhaps related question: I have about 32 minutes of interview material, nothing else (no titles, soundtracks or additional material), and the size of the file is over 7 GBs.  Does that sound right?  (The camera IS on DV, not HDV; I just double checked.)
    As always, many thanks for help!
    Doug

    Doug
    What are you using, Premiere Elements 4 or 10 or other?
    For now I will assume Premiere Elements 4.
    If you are doing DV Widescreen data capture firewire into Premiere Elements 4, did you set the Premiere Elements 4 project preset for NTSC DV Widescreen? Right now I am assuming that you have.
    Then the target is the export settings.
    Please give a detailed account for what you used under Share/Personal Computer/_____/ and the settings under the Advanced Button/Video Tab of the preset that you used if you changed any settings under that Advanced Button/Video Tab.
    or
    Did you export using File Menu/Export/Movie? If so, same request for details.
    I suspect the answer(s) are in those settings.
    With regard to
    A perhaps separate, perhaps related question: I have about 32 minutes of interview material, nothing else (no titles, soundtracks or additional material), and the size of the file is over 7 GBs.  Does that sound right?  (The camera IS on DV, not HDV; I just double checked.)
    My recollection is DV data is 13 GB/hour. If I have not messed up on the interpretation, what you have for about 30 minutes sounds about right.
    Looking forward to your follow up.
    Thanks.
    ATR

  • Videos Come Out Small with Black Space Around-Nikon coolpix L820

    Everytime I export a video from premiere pro it comes out small with black space around the edges-- like this: Above All Odds, Bobby Maze: Episode 1 - YouTube
    How would you suggest I fix this within the settings and how I export it?

    Hi,
    What is the Frame size of the Video?
    In the Project Bin, right click on the File and create a New Sequence from Clip.
    Export the File in the same Frame size as you video.
    Thank You
    Arjun

  • Black frame around clip?

    Hello
    I have a movie clip (saved as a .mov file) and I have noticed that it plays with a black frame around it whether I play it on the desktop (WMP) or on a DVD. The original VHS (C) tape fills the whole TV screen (there is no black frame) and I wondered how I may remove the black frame.
    These are my export settings
    Publish+Share
    Computer
    QuickTime
    have Presets = PAL DV
    under the Advanced Button/Video Tab set
    Video Codec = H.264
    I then change the frame dimensions as follows:
    Frame Width = 768 pixels
    Frame Height = 576 pixels
    Frame Rate = 25 frames per second
    Field Type = Progressive
    Aspect = Square Pixels (1.0)
    For DVD, I choose PAL Dolby (not widescreen).
    Thank you.
    Steve

    Hello ATR
    Thanks for coming back to me.
    This is wahat you posted:
    Steve
    If you can get PAL footage for your .mov fine. If not, and you are left with the NTSC counterpart, here is the plan (grand plan or dud). Let us see
    Import your 640 x 480 @ 30 frames per second into Premiere Elements with the NTSC DV Standard project preset (you will probably have to set the project preset yourself manually before you import the file...to do that File Menu/New/Project, change the project preset to NTSC DV Standard, and, before exiting the new project dialog, make sure that you have a check mark next to "Force Selected Project Setting on This Project". Then import your file with Add Media/Project Assets.
    In Project Assets, right click the thumbnail for the file there and select Interpret Footage. In the Frame Rate section of the Interpret Footage dialog, dot "Assume this frame rate" and fill in 25.00. Leave the rest as is which should be with Pixel Aspect Ratio = Square Pixels (1.0).
    When you are ready to export, give the following a try:
    Publish+Share
    Computer
    QuickTime
    have Presets = PAL DV
    under the Advanced Button/Video Tab set
    Video Codec = H.264
    Frame Width = 768 pixels
    Frame Height = 576 pixels
    Frame Rate = 25 frames per second
    Field Type = Progressive
    Aspect = Square Pixels (1.0)
    For now leave everything else as is.
    At playback, check the quality of the video and audio as well as flow of the motion.
    We will be watching for your results.
    Thank you.
    ATR
    Is that what you mean?
    Steve

  • Black frame around windows

    Hi all,
    recently upgraded to SL. And, from time to time, I have black frames around my windows where the shadow should be viewable.
    Anyone else having this problem?

    PartisanEntity wrote:
    I was able to narrow down the issue, these weird black frames only appear when or after I have used an application that requires 3d graphics, such as Maya.
    Sounds like your system can't keep up with the rendering required...try to run Maya alone, right after a reboot and be sure to have sufficient free space on the HD.

  • Black frame around slides

    I like the slideshow option in iDVD, but I would like to stretch the pictures all over my TV screen. Now, there is a large black frame around every slide. Is this possible?

    To solve this problem to "iDVD" in the menu and choose "Preferences".
    Choose the third tab called "Slideshow", you will get a panel with three checkboxes, uncheck the second ("Adjust dia size to tv-area") to fix the issue.
    (The option names and descriptions might be incorrect since we use a Dutch MacOSX version.)

  • Black frame around marker

    After installing 10.4.8 today I have acquired a black frame around the marker. It is roughly 1/6 of the screen and highly annoying. Feeling utterly stupid, I can't seem to find out how to switch it off.
    Thanks for your help!
    PowerPC G4 Mac OS X (10.4.7)

    I knew I'd seen the rectangle before! I installed 10.4.8 this morning and on restart got the black rectangle. I guessed it had something to do with Universal Access (which I don't use), so I checked the System Preferences to be sure it was turned off. However, I didn't go far enough and turn off the preview bit. I was all set to reinstall 10.4.7 when I saw this solution. Thank you SO much!

  • I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

    I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

    Hi MyAppleID99,
    You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
    Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
    http://support.apple.com/kb/ht2320
    Regards,
    - Brenden

  • Black frame around my icons

    Help!!!
    For some reason, my perfectly normal G5 running Tiger 10.4.7 has this morning started displaying a black frame around any file icons or sometime in the navigation of the finder.
    Please help, I can't find any infomation anywhere.
    Many thanks in advance.
    G5   Mac OS X (10.4.7)  

    I found the answer further down the list.
    For anyone that is interested, click the desktop and hit F5.
    Worked for me.

  • Black Frame Around Slides when Playing

    Hi!
    I recently became a Mac user (ok, in the last year) and love it. I use keypoint a lot because I'm a teacher, however I've been a little disappointed that I always have to export my presentations and use a PC when I want to project/play my slides for my classes because whenever I start to play my slides there is a thick, black frame around each slide (only when it's playing, when I'm creating my slides, there's no "frame" of any sort). If I try playing a ppt show, the same black frame pops up. It's really frustrating because I want to be able to use my Macbook when presenting.
    How can I make this stop? When I play my slides I want them to take up the whole screen, not be surrounded by black!
    SAm

    If you're using 1024x768 or 800x600, you're going to get bars on the left an right because those are "normal" resolutions and your monitor is "widescreen". You'd have to use one of the "widescreen" resolution presentation sizes to get rid of those.

  • Disable/remove black frame around document

    Is there anyway to temporary disable the black frame around a document?
    Sometimes when I design it irritates me to have this frame. Of course I can make a larger document, but sometimes I realize the document isn't large enough and I want to go outside the frame and then it would be nice to temporary remove it.
    By the way, is there a way to change the size of a document once it's created?

    Joan,
    View>Hide Artboard.
    You can always File>Document Setup and change different things. In newer versions, you can use the Artboard Tool.

  • Black frame around active field

    Since this morning I have a black frame around my active field. Can't get rid of it. Does anyone know how to do this?
    Thank you!

    Just checked and the settings are still the same.
    It is only the active field that gets a black frame.
    For example writing an email, if I want to type an email address the active bar I want to type in is surrounded by the frame.

Maybe you are looking for

  • Why can't I see my ipod in itunes?

    I can;t see my ipod musique list in itunes, what do I nee to do to find it?

  • XMLType and Curled Double Quotes (8220, 8221)

    The following select fails with an XML parser error: select xmltype('<tag>“A”</tag>') from dual I'm trying to definitively determine why... We have XML that goes into a CLOB column in our 9.2 database, then is put into an XMLTYPE variable (in PL/SQL)

  • Deployment Warning Message

    "Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/sap.com/TestMDBEAR/Test1, cannot resolve object reference. [Root exception is com.sap.engine.servic

  • Video not showing up where it is suposed to

    I am having a problem i just put a video from my pc into itunes than onto my ipod. I used the program isquint to convert the .wmv file for use on the ipod. Isquint automatically put the files into itunes for me. it had the file type set as movie, but

  • "You can't use this version of the application Address Book

    with this version of Mac OSX. You have Address Book 4.1.1" I have my address book icon in my dock. When I click on it to open - I get the error message verbatim as stated above. I'm stuck. I think it's been a couple years that it's been doing this. H