CS4 and Epson Printing is it still broken?

Just wondering if anyone has testing printing from InDesign CS4 to an Epson and whether or not they fixed the printing issues that were in CS3 (ie. not being able to match a print from InDesign CS3 with a print from Photoshop CS3 without jumping through hoops)?
Thanks,
Kristin.

The following post from a thread at Apple (http://discussions.apple.com/message.jspa?messageID=6717978) has SOLVED my CS4 printing problem.
My prints from CS4 now match my CS3 using my custom profiles.
...."Just finished a 30 minute tech support call with an upper division rep at Epson, we seem to have fixed the problem, I was very skeptical, but so far all is well. This is exactly what we did:
Go to you user account and navigate to:
Library->Preferences. Select everything that starts with "com.apple.print" (I had nine files) Copy these files to a safe place, they contain customization to you r print settings such as paper handling and quality settings.
Now delete the ones from the Library->Preferences folder.
Go to your main hard drive, not your user account, and select "Library->Printers"
Delete "Epson"
Empty Trash
Reboot
Install the latest driver from Epson for your printer.
Open the "Print & Fax" System Preference
While holding down the "control" key, click in the area where the printers are listed (left side bar). You will be presented with a pop-up menu that says: "rest printing system". Select it and your existing printers will disappear.
Add your printer back to the "Printers" list.
Close the "Print & Fax" window
Add your saved "com.apple.print" files back to the User->Library->Preferences folder
Cross your fingers."

Similar Messages

More on Photoshop CS4 and Epson print drivers

I just got my Epson Stylus Pro 7900 with the SpectroProofer option. One thing the SpectroProofer enables is bypassing everything to talk to the printer directly. I made up a sample target (based on Bill Atkinson's RGB 5x12 Hues Target) and printed/measured this with the SpectroProofer. I then took the output printed by the SpectroProofer and measured this manually with MeasureTool and my Eye-One Pro (Rev B ). The average/worst correlation was 1.00/2.02 Delta E 2000, good enough for me given two different instruments and the SpectroProofer patches are a tad narrow for the Eye-One.
I then printed the same target with Photoshop CS3 and No Color Management and this compares well with the SpectroProofer output (0.69/1.90). So I have confidence that CS3 is passing the data directly.
I then printed the target again with Photoshop CS4 and No Color Management, same driver settings and get a CS3/CS4 difference of 3.22/10.25. I repeated the CS4 readings and get 3.21/10.29.
The odd man out here is CS4. The differences between the CS3 and CS4 printouts (remember both with No Color Management) are clearly visible. GIven that the Epson 7900 drivers are brand spanking new, I'm not expecting architectural changes in the short term so I plan to stick with CS3 for profiling/printing.

You may want to explore the solution given and explained by Eric Chan:
Eric Chan, "PS3 prints fine, PS4 prints too dark, same Mac" #12, 12 Dec 2008 6:07 am
Eric Chan - 6:07am Dec 12, 08 PST (#12 of 16) Edited: 12-Dec-2008 at 06:07am
Camera Raw Engineer
Essentially, with the newer Leopard APIs, the recommended approach is for a printer driver to register its printer profiles to the system (i.e., Leopard). That is, the driver needs to provide a default profile to Leopard so that Leopard can provide the appropriate color matching. The default profile provided usually is a function of the color mode (e.g., RGB color or black-and-white), media type, resolution, etc.
CS4 was updated to use the newer printing APIs (a requirement moving forward) and hence relies on the driver providing the correct default profile.
If the driver doesn't do this, then Leopard will provide its own default profile, which is obviously not the correct printing profile and will have the side effect of making prints appear too dark and possibly with a strong color cast.
(BTW, this is exactly what was going on with some Canon iPF printers recently with many users blaming Adobe for introducing printing bugs in CS4, when the real issue was the driver not correctly providing the default profile to Leopard. The issue was resolved a couple of days ago when Canon released an updated driver.)
The problem appears to be Leopard indeed, ironically because CS4 was
optimized for Leopard, while early versions are not.
The solution/workaround has worked for several users already, and it's certainly easy to implement.

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

I use MACBOOK , APPLE AIRPORT AND EPSON PRINTER. I AAM GETTING MESSAGE "PRINTER OFFLINE". PRINTER WORKS WELL AND INTERNET WORKS WELL. How can I get printer to respond

I use a macbook, apple airport and epson printer. After several printer jobs, I get a message "printer offline". I have tried restarting computer. restarting printer and still cannot connect, I can print directly with a USB cable. How can I connect to my printer via the airport?

Delete the printer in System Preferences and re-add it. You may also want to restart the Airport.

Hi, i have just scanned some docs via my Ipad and Epson printer. Saved them on a local folder! Where can i see and access this folder?

Hi, i have just scanned some docs via my Ipad and Epson printer. Saved them on a local folder! Where can i see and access this folder?

Welcome

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

Trouble Printing with CS4 and Epson

I wish to print a 13x19 photo on my Epson Photo Stylus R3000. After entering all the info correctly with paper size, type, quality, etc I get a print with a one inch blank border on the top and bottom. I called Epson and they said it was not their problem, it must be something with Adobe. I am using Photoshop CS4 and Windows 7. Help, please. Doro

So, I found this little piece of info on Epson's site, the question doesn't quite match our problem, but the answer (you would think) would fix us...
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
I followed the instructions to the letter.... no results, I still don't see the driver in the drop-down list of available Printer Drivers!

CS4 and EPSON R2880 Printing Problems

I am having a very difficult time getting color matched prints with CS4 and my R2880 Epson printer. I had no issues with CS3. I have tried every combination available to me and I get very drab almost browinsh prints. I have the latest drivers and also have upgraded to Vista, no change there at all. I am using the proper ICC profiles as well. Anyone else with similar problems? Any solutions? It is very frustrating. Thanks, Bob

I have an Epson R280 on my desk and just did a test printing the same image with CS4/Vista64, CS4/XP, and again with CS3/XP. All three prints used the Epson supplied paper profile and the colour management settings were all set the same.
The results are identical.
I suspect there's a wrong setting somewhere:
- wrong profile being used
- not disabling printer colour management
- wrong paper setting or printing on the wrong side of the paper
I can't imagine why the results would be any different from one version of PS to another.

Scripting Print Dialog and Epson Print Dialog - Consultant Required

I have a project I would like to pay a Scripting Consultant to develop.
The script should run on Photoshop CS 3 , Mac OS Leopard 10.5.6,
I would like the script to be preferrably in Applescript to link with the Mac OS, but it can be Javascript
Functionality
1. The script should script the settings within the Photoshop print dialog box such as the colour profile
and colour management options
2. I would also like the script to control the Epson Print Settings in the Epson print dialog
boxes such as the Page Size/Set Up and Printer settings such as paper type= Epson Premium Glossy.
3. Finally I would like the script to be triggered via a button/palette which floats in Photoshop, so immediately we want to print
a design to a particular Epson printer (we have 4 different Epson printers ) we can click that button and it will
send the print to that printer with the correct profile, media settings, page set up etc
Notes
I have been told that "Configurator" made be the best application to create these printer buttons.
I have also been told that it may be possible to script the Epson Dialog using information from the Script Listener
As you can tell I am not a scripter but have a clear idea of what is required and am happy to pay for the experitise required here.
If you want to email directly please do so -
[email protected]
Thanks very much
Josh

I have been told that "Configurator" made be the best application to create these printer buttons.
But Configurator is for CS4.
I’m not sure the print-dialog can be Scripted the way You want it; at the company where I work we use a Server-Hotfolder-setup which makes such things easier, as one can simply save separated copies into the respective Folders.
You could also post on http://www.ps-scripts.com/
Many of the most knowledgeable contributors to this Forum are involved in that Forum.

Problem with Lightroom and Epson Printer

I'm suddenly having problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5, and have an Epson Photo Stylus R2400. I've been using this combination from the beginning with no problems. Now suddenly when I try to print I get an error message that says Media is out or not loaded correctly. Neither is the case. I have tried restarting my computer, the printer and everything else I can think of, but nothing works. I can print from any other application without problems, so I'm assuming it's an issue with Lightroom.
Has anyone experienced anything similar? I was going to uninstall lightroom and do a reinstall but I can't find my installation disc. Now I'm at a loss to figure out what to do.
Thanks,
Craig

Try deleting you prefs file and/or print templates.
Lightroom is unique to many other programs in that it saves and restores printer settings. Some bad data may tried to be passes. A "fresh start" might help.

Photoshop CS3 and Epson printer

I have PS CS3 with an Epson 4000 running on windows XP. I know Adobe is aware of a problem in which under some circumstances, (when you use roll paper) PS will print a smaller image off center and displaying in the interface the portrait mode despite me clicking landscape. I also know Adobe has a technote that offers solutions (I am already using version 10.0.1 with Bridge 2.1.1.9. Also solutions 2,3, and 4 on the tech notes have not worked. I tried different combinations and permutations of settings to no avail. Now I work on CS3 on the image, save it, and print it on CS2 which I kept on my computer, and has no problems printing. Can you please keep this as an on-going problem, since it has not been solved yet? Any feedback on this? There are a lot of Epson printer out there, and printing for a photographer is absolutely important. Thanks.
Ed Kneler

Have spent hours with both Adobe and Epson support people. I've read several of these forums. Is there an insurmountable problem with CS3 and Epson (2200/2400 are mine)? I have the Leopard patches and upgrade 10.5.4.
With Photoshop managing the color I get prints that are slightly underexposed and carry a pink cast. Color management is off. With the printer managing the color I get prints that are too green and dark. Epson advice here is to have color management off. There are two other choices for management but to adjust a perfectly balanced print to the printer's whim seem like cruel punishment.
Have a calibrated monitor and my CS2 works beautifully. Perhaps the best idea is to just go back to CS2 until Adobe and Epson can decide what to do. According to Adobe people, the CS3 gives much of the management back to Epson. According to Epson -- with CS3, you should choose the printer to manage the color (since this seems to be the trend between the two companies) but we users are not happy with the results.
What is the solution for right now?

O.T. iMac and Epson Printer Issues

I have just set up my new 20" iMac running OS 10.5.6 and have been testing my various peripherals.
Printing old saved PSE3.0 images on my Epson 1290 (1280) they are coming out noticeably darker than when printed under OS 10.3.9. I deliberately did nothing with the saved files in PSE,just clicked print to avoid introducing any screen calibration issues,and the correct .icc profile had been added to Library/Color Sync/ Profiles for the paper I was using (and have always used).
Is this a known problem with an iMac running Leopard ?

Perhaps I should have done this before starting my thread,but who wants to reinvent the wheel !
Having spent many hours this morning,and even more sheets of paper to resolve this problem,I have come to the following conclusions on printing an image from PSE3 in Leopard :
USING THE EPSON PRINTER DRIVER -
Leave the printer manage colour - color controls - photo realistic - gamma 1.8
USING GUTENPRINT DRIVER (http://gimp-print.sourceforge.net/MacOSX.php)
Make no changes to Color Sync use Automatic
Do not change the .icc profile (although I did leave it set in PSE3).
Adjust print quality to max possible.
Both these options give acceptable prints, Epson perhaps a shade darker.
I preferred the colour representation in Gutenprint,but that is obviously a personal thing. Whether they'd satisfy someone making a living from photography is another matter.
In the future I will probably tweak the lightness in PSE to compensate for the slight darkening in the print process,but probably leave the colours alone.
Two other points -
The Gutenprint driver seems to print more quickly.
Adobe and Apple don't seem to care.

Using and Epson printer

I have an Epson R200 which is great - does anyone know how I can select an option (on iMac or the Epson) to print in `black` only. If not, can anyone recomend a printer that only uses `black` - I print more docs thans pics and I can`t afford to keep renewing the colour ink cartridges especially when the docs are just `text` and thus B&W.
I`ve searched absolutley everywhere for an answer to my problem.
PS: I don`t have the original Epson `printer` paperwork anymore.
Russell (Uk)

just filled all the cartridge spaces with all black ones and that way they`d never run out - possible, yes?
I don't think so, nozzles are not smart. When a color is called for it will go to the designated nozzle. If no color is called for, it will never go to that nozzle. Hence the expression, "nozzlehead". Also, the black catridge is usually larger?
I suspect the overiding factor will be that if one (or more) cartridges is `ink out` then I`ll not be able to print even if only `black` is selected as the print optionI'm not sure, but you can use the printer utility to check how low your ink level in each catridge is so you don't let them run out.
-mj
[email protected]
iMac G4 17 FP 800 MHz 768MB Mac OS X (10.4.5) 2 X LaCie d2's APC-UPS / iMac 333MHz 256MB 10.3.9

AEBS and Epson Printer Utility

I wonder if anyone knows of any work-arounds for being able to use the Epson printer utility while using Airport Extreme Base Station? Printer does not show up in window when it searches, since it's connected to AEBS, thus cannot use utility that shows ink levels, or cleans out heads,etc! I have to connect it back to desktop (or laptop)to be able to use.

That is expected. See KB 107430, AirPort Extreme, AirPort Express: Can't use USB printer utilities while printer sharing.

Illustrator cs4 and Epson Stylus R2880 printing problems

I am having printing problems. I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print. The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom. I tried playing with the x and y's but have no idea what I am doing. Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?

Hi Wade,
I have tried playing around with that but I am not sure what I am doing. Here's what it is set at.
On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
When I check the 'fit to page' button it actually puts a bigger white boarder around it. The fit to page number says (96.4706%). Shouldn't it say 100%? If I leave it as do not scale I still have a small border around it.
I am not sure about the xy settings. When I have it to 'fit to page' it is:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, .1632) Bottom right corner (0, .1632)
If I have do not scale button clicked:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, -.225) Bottom right corner is (-.3, -.225)
Do these settings look correct? If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
Thanks for responding,
Celeste

CS4 and Epson Printing is it still broken?

Similar Messages

Maybe you are looking for