CS4 and Printing Problems

I have just upgraded to Photoshop CS4.
I am running Mac OS 10.4.11 on a G-5 iMac.
I have a high end Canon CLC color printer/copier.
I have spent hours on the phone with Adobe (spoke with guys in 3 different countries) and with Canon.
All drivers are current and my system has all updates.
I can not print to the Canon within CS4. I can from CS2 and every other program and have.
My partner has a (intel) MacBook Pro running OS 10.5x.
He can print from C4 to the Canon.
Has ANYONE experiences any problems printing to a network printer (not a bonjour printer) from CS4 in OS 10.4.11??
My fear is that CS4 really needs OS 10.5x.
I am still running 10.4.11 because I am a Freehand power user.
Thanks for your help.

This is a high end color network printer/copier (Canon CLC 1110).
It is connected via ethernet to a switch thru a router (Airport Base Station) (which is connected to a cable modem).
My computer is connected via ethernet to the switch. (Not via airport)
I can not directly connect to the printer. Other designers need to print to it as well. They have no problems because they have not upgraded to CS4.
My partner can connect via airport. He is on a MacBook Pro running OS 10.5.4 and CS 4.
My issue is... Does OS 10.4.11 really work with CS4 on a G-5? (The documentation says so, but...)
While I can run the app- I can not print from it to the network (LDP) printer.
I can print to a bonjour printer (HP Laserjet 1320n).

Similar Messages

CS4 File Printing Problem

After recently experiencing a transient power outage I am having a problem printing a particular file from Photoshop CS4. The system seems to have recovered well from the electrical outage, with one exception. When I try to print a particualr file that I had been working on, I get the foillowing message.
The Vista-64 operating system recognizes the installed printers (two), my other apps have no problem printing to the default printer and opening a few other Photoshop files does not produce the same problem. In other words, the problem seems file specific. The question is how do I remedy the problem with this important file ? Duplicating its many layers in a new file does not solve the problem.
Paulo

Curt Y wrote:
Have you tried the standard Tech response "have you rebooted the computer since you made changes"?
When you open up the PS print window does it list the correct printer?
Yes, I have rebooted and everyting else on the computer is happy with the printer setup. I've also reset PS preferences. It seems to be a file problem.
No PS print window opens- After the error mesage window is dismissed I am back in editing mode for the file.
I think I am going to have to create a new document and drag all the layers from the subject file into the new file and hope that clears up the problem. As I mentioned, selecting all the layers and using the Duplicate Layers command to a new file did not solve the problem.
Paulo
PS - update: I Created a new file, dragged all the layers from the problem file to the new file and the printing problem disappeared. Do not understand it, but when dealing with a probably corrupted file understanding is a stretch.
Message was edited by: Paulo Skylar

HP Officejet 5510 all in one - stalling of printing carriage and printing problems

I have had this All in One Printer since December 2004. It had been working fine until I replaced a cartridge at a refill store over a year ago. To deal with the problem with HP I felt would be time consuming so I put up with the problem and if I needed good quality printing, I would take it to Kinkos.
The print carriage is slow to respond and print from my computer and then in the middle of the task the carriage will stop and stall or bang like it wants to move, but is stuck and then, with all the lights flashing, I get a message in the copier window for me to clear the printing jam or carriage jam and then press OK.   I open the door to the carriage and then close it and press OK. It does not always work the first time to make the carriage stop banging. Eventually it will stop and the paper will release and then it will continue finishing the task, but a lot of the time what is printed has double printing with jagging to one side of the paper.
This is also affecting receiving any faxes because it involves print carriage.
I have done all the steps for clearing a paper/carriage jam. There is nothing visable to cause a jam. I have managed to do the self test after the printer goes through some banging and then telling me to open the door to clear the jam.    I have done the steps to
clean the cartridges and then again do a self test.   I downloaded the latest driver/updates for the printer, but the problem persists.
The cartridge refill store , not seeing the problem first hand, keeps offering for me to bring back the cartridges if the problem persists and replace them.
Do you think it is the cartridges or the unit?   I just replaced the black cartridge in December 2009 and have not print much knowing
the quality would be poor. Yesterday I saw a message that I am low on black ink. That does not seem possible.
When I do the self test it is showing white lines through the colored bars and I am missing the pink or red bar. So I know I have to replace the color cartridge.
As far as alignment, when I did the first of two self tests,                                                     Second Test After the Drive Download
                                                           the Vertical Cartridge to Cartridge read    -12                               -24
                                                       the Horizontal Cartridge to Cartridge read    -24                                99
                                            the Black Bidirectional Cartridge to Cartridge read    -54                                0
                                             the Color Bidirectional Cartridge to Cartridge read      6                                 6
After doing the steps to automatically clean the cartridges, it printed a report with symbols at the top. They look to be squeezed together and the top portions of the symbols are missing. The black bar has some white indents along the edges and the blue and yellow bars are spread more apart with some lighter colored lines vertically.
I have Windows XP and the HP Director was not working. I downloaded the patch and it is working correctly telling me that both cartridges are low, the black more than the tri-color and now a message that the print carriage has stalled. The help button tells me to do everything I have already done.
Do you have an answer that I can manage by myself or would it be better to take it to a computer repair place?
Thank You , 918nifferf

I have a carriage jam on my HP Officejet 5510 which I cannot correct.. I have tried everything I know to do. There are two black pieces that will not spring down when the cartridges travel across. I th en get a carriage jam message.
Do these pieces need lubricated?
How can I get t hem to go down when the carriage goes across?
Thanks for any information or help options
Karol

Saving Jpeg in Photoshop CS4 and having problems

Okay, i have been looking all over the internet and i hope it's something really foolish...
After editing a photo in Photoshop (CS4) and saving it as a JPEG / JPG, many people using windows can't open the file, and it gets the extension .JPGG ( ...?... )
If I import the picture in Iphoto first and then mail it ther is no problem.
perhaps this is quite obvious to some, but it's a mystery to me.
To update my website i need to save my JPG files to an XML folder and then flash reads the files and opens them in the site.
The JPG files i saved using photoshop won't open in the site, even worse, the site won't even load because the loader gets 'stuck'.
i tried putting them in Iphoto first because that helped with with mailing, but it doesn't seem to be working this time.
I've tried all the JPG saving options like Baseline etc. converted them to RGB ( they already were) so i'm out of options.
ANYONE ?

Welcome to the Apple Discussions. I have CS3 so don't know if there's major changes to the formatting process by each version. That may be a question to ask in the Adobe support forum.
However, for a workaround you might try using the Automator workflow I created to change any image file to jpg with the sRGB color profile. Just drag the files onto the workflow icon and they will be converted. You can get it, "Convert to JPG and Embed sRGB profile", at Toad's Cellar. See if those jpgs will work OK. There will be some jpeg compression applied but if they are for posting on the web it may not be objectionable.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

PDF Export And Printing Problem

I am using VB 2005 and the Crystal Reports that is bundled with it. I have reports on my website in the Crystal Report Viewer. I have the tool bar showing the Export and Print buttons. When you try to print (or export to PDF) you get an error from Adobe Reader "Adobe Reader could not open 'AcrXXX.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
I can see the file in my temp folder on my c-drive and the file (AcrXXX.tmp) does not contain a pdf instead it contains html for the report (including the report viewer). I tried deleting everything in my temp folder and I still get the error. My desktop is Adobe Reader 8.0 and IE 6 and Windows XP.
The same code will create the PDF on all development and test web servers just not on my production server.
I have no problem exporting a report to Word.

Hello Wendy,
if you are not too sure whether this errro is CR or VS related pls simply try to use one of our samples and see if you can export from htere or if you get the same error:
Sample site for NET:
https://boc.sdn.sap.com/dotnet/samples
general docu:
https://smpdl.sap-ag.de/~sapidp/012002523100005853792008E/walkthrough_supportfiles.zip
specific samples:
https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe

How to Copy Excel table into CS4 and print onto photo in sequence.

I would like to be able to import fields from Excel into Photoshop CS4 and have the Excel information print directly onto the photo image as a line of text across the bottom and layered over the image itself. This Excel information needs to be able to change sequentialy (eg: ascending numbers, etc) with each new photo. Is there a way to do that with CS4 (or do I need a later version of Photoshop) ?

Hi,
I'm not sure, but your best bet would be ask over in the photoshop scripting forum.
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
It's possible the variables feature in photoshop cs4 could do something like that:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7417a.h tml

Display and Printing Problems

I am using Photoshop CS5 extended on a minimac running 10.7.4. I have the lastest updates from Adobe installed for the Adobe Creative Design Premium Suite 5.5. I am having problems with photos not displaying correcting, but not all the time. This may sound strange. I am working on a project for a client with outside floor samples. The samples have smooth areas along with pitted or valleys patterns in it. When the photo is displayed in photoshop it displays correctly for a time. I can leave the photo up or I can reopen the same file and the valleys and pits that are suppose to be displayed are now reversed and display as mountains or like a relief type of effect and prints that way too. Hopefully someone else has had a similar problem and can help.
This same problem occurs in Bridge CS5. The photos will display correctly for a short time but then the photos are reversed with the all the valleys pattern showing as mountains. I have deleted the cache, but to no avail. If I change to anothe folder go back to the original sometimes this clears the problem but not for long. So what gives?

Thanks Noel for the reply. Hopefully this will help.
This is how the file should look like.
This is how the file usually displays.
Any help would be greatly appreciated.
Regards,
Ron Cecil

Snow leopard and print problems

I installed Snow Leopard in my MacBook and bought the new Imac desktop with Snow Leopard...now I cannot print wirelessly from either these or my old G4 (Leopard)....followed all directions and spent much time with apple support...downloaded Canon drivers and software again to be sure I had the latest and still no success. Canon then tells me the equipment does not work wirelessly even though it did on Leopard....(it is a Canon Pixma MX850)
Any suggestions would be welcome

I didn't see that 10.6.1 did anything for printing. BUT I did see new drivers from HP, Canon and Brother.
In your case, I should point out that the MX850 does not use Bonjour. There is no way for the Mac to see this printer on the network without first installing Canon SW. Kind of a chicken and egg problem for the auto driver download. So you will need to manually download the latest Canon SW:
http://support.apple.com/kb/DL899
If you installed SW from Canon's web site / CDs, you first might want to trash /Library/Printers/Canon and reset the printing system (Hold Option and click the "-" in print and Fax Prefs).

WRT54G Router and print problem

I have my desktop wired to the router. Laptop is wireless.
Desktop is always on so I want to be to print from laptop.
Running XP with firewall off. File and print sharing enabled.
Broadband internet works fine on both. But when I run
Network setup wizard I lose my internet connection on the
wired desktop. Have to restore on desktop to get it back.
What am I doing wrong?

fscoglio wrote:
Workgroup names are same.
I set up shared folders on both computers.
Firewall is disabled.
I can ping laptop from desktop.
Laptop is 192.168.1.104
Desktop is 192.168.1.1 which is same as router? Is this correct?
Devices on the same network cannot have the same IP address. Since 192.168.1.1 is for the router, check the IP of the desktop and try to ping that.
"When you have eliminated the impossible, whatever remains, however improbable, must be the truth."

CS5 Color Calibration and Printing Problems vs. CS3

We are migrating from CS3 to CS5, and i'm working on getting the printing right.
We are on MacPro towers, 10.6.6, with LaCie LCD Monitors and an Epson 2200. Calibration on monitors and printer done by EyeOne Pro and Profilemaker Pro.
Printing: In CS3, creating the profile was done by printing the appropriate Eye One testchart. It gets opened with 'no color management', and is printed out with 'no color management'. This way, the testfile is being printed as the printer prints, with no tweaks. The color adjustment controls (brightness, saturation, cyan, magenta, etc) within the Epson driver are set to Zero. Then, this print is scanned in, using the Eye One, and you get the profile of the printer.
Now, when printing actual files, 'Photoshop Manages Colors' is utilized, and the created Profile from Eye One is selected.
We have had great luck with this, matching screen to print. If a slight tweak is needed, then we could use the Epson color adjustment controls to modify slightly.
Again, we've had great prints consistently for years using this method.
Now comes CS5...
Printing. Trying to use our existing profile...
When 'Photoshop Manages Colors' and the Profile are selected, now the Epson color adjustment controls are greyed out. So, we lose out on the 'tweaking' possibilities. I'm a fan of profiles, but now i have absolutely no control after the fact.
Trying to create a new profile....
'No Color Management' is not longer available as an option in 'Color Handling'. So, now i can't even print out the baseline testchart without adding some sort of profile to it? If i would choose 'Printer Manages Color' for this testpage, I would normally set the Epson Color Adjustments to Zero to get this baseline print for profiling. But now, If I would do that, it's only going to be greyed out when i go back in and let Photoshop manage the colors. Sheesh...
To make matters worse...
I pull up the same testchart in CS3 AND CS5. We are on a calibrated monitor, using North American Prepress presets on both programs. Same monitor, same color settings, same file. AND the testchart looks different in each program. Similar, but definite differences in shades. Eyedropper readings are the same for both programs.
So, CS5 is even rendering color differently on screen, and i have little or no way to create my custom profile or control my printer? Sheesh....
Any help or direction is appreciated.
Rich

thanks for the input.
I will look at the links you recommended. When 'Compensate for Scene-Referred Profiles' is unchecked in CS5, the monitors match. I'll need to do some research to see that that 'compensation' is, and what's happening.
As for the 'not considered a good color managed workflow'...
That's fine. But I would consider a good managed workflow using a calibrated monitor, and using a profile that matches the printer and substrate being used, right? When i plug in the canned printer profile in CS5, i get unsatisfactory results. With that 'correct' workflow, there is no way to modify what is ending up on the printed page. You get what you get.
Even if i back up to CS3, create a custom profile with the Eye One, run Colorsync/Profile all the way through, and eliminate the Epson Color Adjustments, I'm still obeying a 'correct' workflow, but what if my prints are slightly too Cyan? Or slightly too open/light? (granted, Profilemaker Pro does have a profile 'editor', but it's convoluted and extremely difficult to use. I've never gotten good results with it.)
If you have no way to do small adjustments at the back end on the printer, and it's been 'profiled' correctly, and the prints don't match calibrated screen with proper color spaces....
uh....then what do you do? which one is right? The screen or the printer?
I've had hundreds of images over the years go from screen to client (or press if we were controlling the print phase of the job), which then got printed, and have had basically 'zero' client issues with color. We have great color here on screen, from capture into post production.
But when my client wants a proof, in house, they want to see what they've been seeing all day in the studio and in post. How am I supposed to adjust my prints if a 'proper color managed workflow' isn't giving me matching proofs?
I sincerely appreciate the input here. I'm just frustrated, because even if my 'workflow' isn't technically correct, it's not without merits and I've had excellent consistent results that just 'worked'. Now, i've got to find a new method within CS5.

FinalCutServer, Kerberos, and Printing Problems

Has any one come across the inability to print when Windows Active Directory has Kerberos DES Encryption enabled on user account? Obviously we have a separate domain controller and print server. Users can press print but job doesn't show up to be released in papercut (printing authentication)

Geoff,
This sounds like a printer driver issue. Do you have the latest driver software? Have you contacted OCE? Have you tried uninstalling/reinstalling the driver?
Neil

CS4 Extended printing problems

I am having problems with printing from CS4. When I go to print and it doesn't matter which printer I am sending the image to...... I get 2 different screens in this order....."Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." and then I get.... "Could not complete the Print command because of a program error." Needless to say... I have printers installed (all drivers up-to-date) and have no problems like this in any earlier versions of Photoshop.
Also in the "Print Window" there is no image unless I hit done, and then it comes up as a "negative & backwards image" in the window........and of course, will still not print.
I am on MacPro 2x2.66 GHz Dual-Core Intel with 4-1Tb hard drives, 7gigs of ram, Leopard 10.5.6 and am up to date on all software.
Any Help out there?
Thanks in advance. Mark

Hi,
I realize this is an older post, but I am having the same issue. When you say you talked to tech support, which one? Apple, Adobe, Epson?
I have narrowed my issue down to my Epson 1270 printer. Even after I installed to newest drivers (as of 6-8-10) i still get the error "could not complete the print command because of a program error".
I can print to any other printer on the network (HP Laserjet 2100 tn, HP Officejet 5510). But when I try to choose the Epson Photo Stylus 1270 (that is shared through USB), i get the error: "could not complete the print command because of a program error"
Furthermore, once I get that error, Photoshop will no longer open any files. I then get the message "could not complete your request because of a program error" whenever I try to open any files in PS CS2.
The reason I say I narrowed it down is because I tried disconnecting the Ethernet cable from the network (LAN) and it worked fine (after I restarted).
So I plugged it back in and unplugged the printers from the network one-by-one. The Epson was the culprit. As long as the Epson is on the network, Photoshop locks up.
If the drivers are up to date, and I reset Photoshop's prefs settings, Why am I still getting this error.
Using Mac Mini 1.25GHz PowerPC G4, 1GB ddr sdram OS X 10.4.11).
Photoshop CS2 version 9.0
thanks,
Matt

Photoshop CS4 and printing with HP 8500 All in one

I have problems with printing direct from Photoshop CS4, then I look in the "Page setup" it looks fine - then I press "Print" - "Scale to Fit media" - "Print..." the images only fill 10% of the paper. The printer is by default ( I have tjek it in the setup ) set to "A4" paper format -
Everything else i print from MS Word, MS Excel looks fine
Steen Mikkelsen

John Joslin wrote:
Right click > Open Image in new tab – click to magnify.
Easy peasy!
Yeah for John ! Never thought of that shortcut. I think you meant right click - 'open link' in new tab ? I don't have the option 'open image in new tab'. Thanks, I was using Chrome @ the time, which unfortunately doesn't have this option, yet.

OSX, Acrobat Reader 5 and printing problems

Not sure this is in the right place (possibly should go to the Adobe Reader section) but help needed.
I have PDFs that look just fine on screen, but when they are printed out, the image is being reduced in size. It is as if there are some margins set someplace (although where, I have no idea) that are over-riding the PDF as it appears on screen. Is this behaviour typical with reader 5? Is there a setting somewhere that will cause the image to be reduced in size? If this is a bug, does anyone know if it is fixed in the Adobe reader range? Is anyone else experiencing this?
My set up is a Mac G4 sawtooth, with upgraded processor (1.5GHz) and new hard drive running 'out of the box' OSX 10.4.6 (Tiger) with Classic accessing the original OS9 installation on the original hard drive.
Range of Adobe products running in Classic (PS 5.5, AI 9.2, ID 1.2) from which some of the PDFs originate.
Old OS9 compatible printer (Epson SP1200) died recently, new printer (Epson SP1400) is only comaptible with OSX, except going via Laserwriter8.
Problem was present with old printer before it died as well, so OS/printer incompatibility is probably the issue.
Upgrading to CS3 is an option, but an expensive one, so wish to explore the Portable Document Format option first!

It cannot be a problem of the installation, because at least Windows 7
was a fresh install with nothing but Reader additionally installed.
By the way, what do you mean by "risky", I followed straight the
documentation from Adobe, where one is allowed to place function calls
requiring a privileged context.
Have you any better idea where to place the call to save? It must be
called automatically, when the User closes the window, no additional
interaction is possible.
One other thing is the call to exportXFAData, have you any idea why
there is a difference in behavior between reader version 7 / 10 and 9?
I wrote that in version 9 the user entered data is missing.
Am Donnerstag, den 21.07.2011, 05:53 -0600 schrieb try67:
No, it doesn't work.
Sorry, I don't have any ideas except for trying to repair the installation
of Reader.
However, placing code in the WillClose event is considered risky and should
be avoided if there are alternatives available.
>

Display and Print Problem with Reader 9.1.x

hallo
an external software produced pdf-documents. all of this pdf´s will work with all reader-versions 7 and 8. but with 9.x we have the problem, that the view is not korrekt. letters are not comlpete. this view will also be printed. this error is not on alle text-lines, but some lines show uncompleted letters. the manufacturer say, that is all standard and it is sure that the reader will have the problem :-) yes surely.
but maybe the reader is the problem. some ideas?
the attch file shows the error. it is a label and in the middel of the label: Tamaris-TREND or with reader 9.x T.......-TREND.
thanks
markus

testing and testing and testing
here the newest info
it is not the letter size. small or caps letters.
i added a new pdf. here under the bold number you must see "581*LAVENDER". but with reader 9.x it looks like the printer cardridge goes empty.
i´ll go crazy with this sh... :-)
thanks
markus

CS4 and Printing Problems

Similar Messages

Maybe you are looking for