CS4 Arrange Documents in Workspace?

Just wondering, as a new CS4 user, if it might be possible to choose "Float All in Windows"  from the Arrange Documents dropdown as a part of my workspace?

You set it in Edit > Preferences > Interface by unchecking Open documents as Tabs.

Similar Messages

  • Photoshop CS4 'Arrange Documents' dialog

    Photoshop CS4:
    Problem: With several documents open by going to the ‘Arrange Documents’ flyout dialog they could be arranged in the manner required - however the dialog flyout on my setup is blank - I can still arrange the documents by clicking on the appropriate blank area - but I would like to see the appropriate indicators back in the dialog - they used to be there!
    Any pointers to a fix for this?
    I have tried removing and restoring CS4 - this didn’t fix the problem.
    Thanks
    Hawkeye
     

    I removed Nik Silver Efex Pro and CS4 is happily back to where it should be - I have no real need for the Nik programme which I was trying out.
    Thank you for a rapid and correct response to something that's been annoying me for the past week or two!
    Hawkeye

  • CS4: Arrange Document for Saddle Stitching Feature

    I am going to be making a magazine or booklet printed on tabloid and then folded to create a booklet. Is there a feature in InDesign CS4 to make the arrangement quicker and easier? I could manually figure out how to arrange the pages but that seems like unnecessary work.
    For future reference I'd also like to know the technical term for this technique of arranging the pages properly for saddle stitch binding so I can google this next time.
    Thanks!

    No copy shop I ever used accounts for creep. I send a book out now and then to see what the Staples does (There's one about 10 minutes from me).
    Most shops use the same stock for their jobs. Almost without exception, I use 20# or 60# offset for inside pages. Occasionally the 80# gloss text job. You'd be surprised how accurate I can be. It's like any job. After years and years you get a pretty good feel. The majority of clients aren't even concerned about creep. Especially if they're supplying me the single pages. I'll adjust creep for jobs I design in house and will be pretty accurate.

  • Arrange Documents CS4

    Hello
    One new feature in CS4 is 'arrange documents' and the drop down options.
    This works great. However when I close the open files and open some more
    CS4 has lost the settings I had. Is there somewhere to make it default to
    'my' settings - always do the same as last settings. For example 'float all in windows' would be the default to always open new files instead of tabbed always opening first.
    Thank You
    Forrest

    Ok Thank You. I think I found it. If anyone else would like the answer its uncheck 'Open Documents as Tabs' under prefs/interface/Panels & Documents
    Forrest

  • "Arrange Documents" panel plugin bug - Please Adobe give technical details

    Hi,
    A lot of users are hit by this bug that appears when installing certain
    plugins under CS4 (Nik Software plugins for example):
    - the menu bar buttons that should be highlighted in color when hovering
    them switch to a full grey area.
    - the 2 top Panels in the Arrange Documents drop down menu are
    invisible.
    Adobe say this is a problem with older plugins and a misunderstanding
    about how resources are managed in plugins (read : it's a developer
    mistake) and plugin vendors don't make any firm statement about this
    issue.
    The workaround that generally works is to close and reload the plugin
    but this works only for the current session.
    It would be nice if Adobe could give us users clear and detailed
    technical information about this issue. Many of us are developers or
    power users and since the communication between the plugin vendors and
    Adobe doesn't seem to be that effective, at least we would be able to
    transmit the information to the vendor's technical support ourselves.
    And as a developer, I'd like to know what mistake so many developers
    have made when using the CS4 SDK.
    It's very annoying to live with such trivial problems since months
    without seeing any fix released.
    Patrick

    [email protected] wrote:
    > Have you asked about this on the SDK mailing list?
    > Or contacted the Adobe product manager who works with third party
    > plugin developers?
    >
    > We maintain pretty active communication with third party developers.
    Chris,
    However, it seems that there's a communication problem about this
    particular issue, at least with some major vendors. I received a message
    from Nik Software yesterday telling me that they are aware of the
    problem and working on a fix. However, this is not a new problem and
    since it is apparently a well-known misunderstanding about how some PS
    APIs are working and since many plugins from various vendors are
    triggering this misbehavior of the PS UI, I guess this must have been
    documented somewhere. I can't imagine that this is not the case. If Nik
    Software had received the right information from Adobe, the problem
    should be gone since a long time.
    Well, ok, I'll ask on the SDK forum.
    Regards.
    Patrick

  • Arrange Documents menu blank

    This is actually a sub-thread of this one:
    Mylenium, "Initial issues with PS CS4 Extended Windows XP Pro." #1, 16 Oct 2008 8:52 pm
    Since several users, including me, have reported that the top part of the Arrange Documents menu is blank in PS CS 4, I thought it would be helpful to those doing a search on the problem.
    As seen in the other thread, removing the NIK plugins fixed at least one user's problem. In my case, it was removing the PhotoKit module from the Automate directory. I've been in touch with Pixel Genius Support about the PhotoKit problem, and they are having their engineer look into it.
    Bottom line, it seems that if you're having this problem you might want to start by removing plugins to see if that cures it.

    Chris - I appreciate the reply. It's frustrating though. CS4 has been out since mid-October - two months - and there is still finger pointing as to whose problem it is with various plug-ins, whether PixelGenius, NIK, OnOne, etc.; and even "fixed" plug-ins, like those from OnOne and NIK aren't fixed...they're workarounds or "live with it" solutions. Various plug-ins are an essential part of the workflow for many, probably the majority, of Photoshop users; it's disheartening that their seems to be so little collaboration between some of the major player and Adobe and vice-versa. I know it may be a bit too idealistic to think that updated plug-ins and the newest version of Photoshop would be released simulataneoulsy, but eight weeks without progress in some instances is baffling.

  • Arrange Documents Menu problem

    The top half of the Arrange Documents Menu is blank even with multiple documents opened.
    Windows XP Photoshop CS4
    Thanks
    Dennis Hallinan

    >or are you really saying I should have said 'either/or' rather than 'both/and'?
    Well, actually, yes! Maybe the correct way would have been: "it might be useful knowledge for any who might not frequent this forum and the Imagenomic forum".
    But then a cheerful "it might be useful knowledge for any who might not frequent this forum or the Imagenomic forum" could very well draw some attention of the
    sensors concerned.
    Come to think of it: "it might be useful knowledge for any who might not frequent this forum and if appropriate the Imagenomic forum" hits the nail on my head.
    Rob

  • Photoshop CS4 new document dialog issue...

    http://img50.imageshack.us/img50/7835/optionpu6.gif
    Can this Photoshop CS4 new document dialog issue be improved? Info in the pic.

    there's a feature request section at the top of the fourm allen. these kinds of posts should be done in there, so the programmers and engineers at adobe have them all in one place.

  • How can I print a document from "workspace?"

    How can I print a document from "workspace?"

    1. Buy a AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
    http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
    3. Start printing from your iPad without wire
    http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

  • Export web analysis document from workspace to excel

    Hi all i have the problem regarding exporting the webanalysis document from workspace,i.e when i drilldown the webanalysis document to lowest level and right click on the report and select "export to excel " i am being prompted the webanalysis login and password and unable to view the report in excel . i have the requirement of export to excel directly without the webanalysis login page. pls do provide me the help.

    It's possible to do it but it requires using a script. You can't do it by using the built-in Export Form Data command.

  • Printing a WA document in Workspace

    I have a WA document that consists of a dashboard of 4 objects (spreadsheets and charts) in a 2x2 matrix. All objects are on a single panel, and I have manually aligned them. When I open the document in Workspace, all objects are properly aligned on the screen, but when I do a "print screen via PDF" , the printed output loses much of the alignment (i.e. one chart will overlap another).
    Is there a better way to print a WA document in Workspace? How do I retain alignment of objects on the screen when printing?

    Hi,
    Have you tried using anchors instead of manual alignment? Also try using 1 horizontal split panel and 2 vertical ones for the 2x2 matrix.
    Regards,
    Gerd

  • Where is the "Arrange Document" Icon in Top Menu Bar in PS CS6?

    PS CS5 had icons in the top menu bar where the "Arrange Documents" icons were located.  Now I can only find them in the Window drop down list.  Are they still available in CS6?  It was nice not having to find them in the "Window" drop down list.

    Some UI (or is it UX, nowadays) genius at Adobe has reduced accessibility of frequently used features.
    If there are particular arrangements you often use, assign keystrokes to the menu items.

  • Application Bar's "Arrange Documents" goes blank when curser hovers over it

    Whenever the cursor hovers over the "Arrange Documents", "Screen Mode", "Launch Bridge", "View Extras", "Hand Tool", "Zoom Tool" and "Rotate View Tool" the icons go blank.
    When clicking on them (i.e. "Arrange Documents") only alphanumeric is displayed. When moving the cursor over the blank area where icons should be displayed, only the pop-up tool tips are displayed.
    Has anyone encountered a similar problem?
    Cheers,
    Michael

    There is a work-around...
    The following is NIK's answer to my question:
    "Thank you for your email. This is a known issue that will be resolved with a future update. Until then there is a work around where if you just close and reopen the selective tool, the issue will go away. You can reopen the selective tool by going under the File > Automate option inside of Photoshop."

  • Error message at installing Contribute CS4: No Documents Types have been found

    I get an error message when reinstalling Contribute CS4: No Document types have been found. The application will exit now.
    Does anyone know a solution?

    Sorry, I am working on a iMac OSX Yosemite v 10.01.i. Contribute software is ofcourse older but there was no indication that reinstalling on this new computer would not work.

  • Why Tools list does not include the widget "Arrange documents"?

    Why in the Configurator’s Tools list was not included the widget “Arrange documents” from  Photoshop’s Menu Bar? It would be great  to find N-up view  buttons in the Configurator’s Tools  list in future.

    Abufarzana, this is a user to user forum and noone from Apple is here to address your request.  However, if you wish, you can submit your suggestion to the Apple feedback site at the following link:  http://www.apple.com/contact/feedback.html

Maybe you are looking for

  • 1020 There is no lock for ringer volume level, but...

    Earlier today I posted in this Community regarding the Subject issue. Received good reply and marked it as a Solution. Had additional thoughts so I'm doing this new Post. Same Subject as before. I had asked if it's possible to LOCK the ring volume, a

  • Who can help me using IVI powersupply in Teststand!

    Hi there, I'm newly in working with Teststand and IVI drivers and have a little simple question. I have a step to configure the powersupply. The logical name is "SamplePowerSupply", the operation is "configure". If I change to the "Validate IVI Confi

  • I would like to run the vi first and then press the safe button to write it to disk.i am sending you the vi. please can you tell me how can i correct this vi?

    i am running some vis in frames of sequence frome frame number 1 to frame 10.after this i would like to create one other vi with some strings and i want to save it to disk with a save button. i am opening,writing and closing the data.what i want is t

  • Rg23c  register

    Dear Friends,                    this is chandra shekar , here i'm proccessing consumeble material with mat no material type is ZCON consumeble which is copied from HIBE , this is excisable material so when i'm capturing excise invioce the values r u

  • Performance using UNION ALL

    Hello i have 2 schemas S1 and S2 containing complex relational tables. The tables in each schema are related to each other via foreign key relationships. i made views for feature tables in both the schemas , querying column values from their related