CS4/AS2.0 Newbie Question.. help please?

Hey all, I'm a newbie on the forum and in Flash.
I've used it before, made my pages into scenes, and
everything worked fine. Apparently, this doesn't work anymore (I
used an earlier version of Flash) in CS4, and everyone is
recommending to use frame labels. This doesn't work either.
This is a screenshot of my site right now.
The ActionScript is the exact same in all three frames on the
actions layer you see in the screenie.
All I want is when clicking on the AboutUs button and
WhatIsHypnosis button, that they go to the specified frame labels.
The only one that works is the AboutUs button. I can click on
it and it loads the content that its supposed to,but the home (the
logo) and the second button do not work. They are clickable, just
nothing happens.
I've tried everything I can think of and that I have been
able to find.
Changing the type of frame label has no effect.
Help please? I've been trying to fix this for a good 6-7
hours.
Screenshot:
http://img407.imageshack.us/img407/2372/picture8sq4.png
Thank you!

Fixed. :)
I have no clue what it was..
I changed some frame labels around, renamed a few buttons,
renamed some instances, and it magically worked. :)

Similar Messages

Newbie audio question--help please...

I recently recorded/captured video from Canon HV30 and unfortunately found that only Left audio channel was recorded..Right channel in non-existant. How do I duplicate the audio track from Left to Right so that both tracks are played in sync?
I appreciate your help on this newbie question!

When the left channel is filled you use the Fill Left effect
The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information.
Instead of putting the effect on each clip use the Audio Mixer.

New/Additional phone line question- help please!

Hi
I am after some advice, and every time I call BT I get passed around as I am not 100% on what to ask for, or who I should speak to.
Basically, we have 2 phone lines coming into the house. One line/number + broadband signal goes via a repeater to the office which is a separate building across the garden (approx 300m but I am not sure on the actual distance). The signal is not great, for the broadband particularly - often drops out etc. To solve this we would like a new physical line installed in the office building to give us a separate phone and broadband package to that of the main house, but ideally keeping the same number as we currently use in the office. The office is used everyday for working from home and so is important to us.
Does that make sense? I fully expect that an engineer will need to look at the site, and there will be a (significant) charge for the line to be installed (underground pipe work for cables already exists from house to office building and so this could be utilised). Do I just place an order for a new line online, and wait for an engineer's visit? Can I deal with changing the number at a later date if that is easier for the system to deal with? Last time I rang BT, I was told I needed to speak to the exceptions team, when I was put through to them she told me all I needed to do was speak to customer services, customer services thought I was trying to move home and then didn't seem to understand what I needed (but it was probably how I was explaining it!).
I would be so grateful if someone could point me in the right direction, or give me tips on what to ask for. My main worry is keeping the same phone number as it would be so much easier.
Thanks in advance
MPA

this link may help http://www.openreach.co.uk/orpg/home/network/whoareyou/selfbuild/selfbuild.do
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Newbie question. help vector add

hi group
i have this problem:
valoresindex.add(1, val);
for (int i=2; i<numColumns; i++) {
valoresindex.add(i,rs.getString(i));
System.out.println((String)valoresindex.get(i));
the error it is:
Error al leer archivojava.lang.ArrayIndexOutOfBoundsException: 1 > 0
help please.

You are trying to add an item to the '1' index, but there are no items in the Vector yet. If you want to add items to a Vector one after the other, just use add (Object o). There is no need to specify an index.
Secondly, the items in a Vector start at the '0' index, not '1'.

Newbie questions, help needed, please

I am pretty new to Oracle Application Express. I have two problems when I try to create Page with type of "Report and Form". I hope you guys could help me out:
(1) When I create Pages with the type of "Report and Form", the first column, primary key does not show up in the report page. Why?
(2) When the table has two primary keys, I have problem when I click the button to go to form page from report page to update the record. It always show error said "Fetch returns more than one rows". How can I tell the application that I have two primary keys?
Thanks,
Lee

Put in "HTML Expression [Insert column value]" part of field which will be a link:
a href = f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.::NO::PX_PK1,PX_PK2:'+'#PK1#'+','+'#PK2#')">Edit< /aput in previous sentence "<" in front and ">" on the end and remove blank before "/a" - otherwise you'll not see the content but real link!!!!!
where :
<li>"&APP_ID." is the page in which you want to open and start edit</li>
<li>"PX_PK1,PX_PK2" are items on that page (probably hidden) tha will represent primary key</li>
<li>"#PK1#" and "#PK2#" are primary key values on current page (from table grid represent with query "SELECT PK1,PK2,...from MyTable"</li>
P.S.
I read somewhere that life with Appex should be much easy when people should use PK base on one coulmn (sequence).
To ensure PK on those fields create UNIQUE index on those two fields and in table define NOT NULL on those two columns.
When you get expireienced you'll know the benefit of this advise

Might sound like a newbie question but please help! (WRT610N)

I purchased the WRT610N to replace my old WRT54G. I like the router overall, but I am running into glich after glich. I figured out most of them up to this point, but now I'm running out of ideas. Before the firmware upgrade release on 1-21-09 I was able to access my USB storage drive via hostname on my local network. For example any shares on my local network show up under my workgroup in windows Vista/XP (mixed enviornment). Now after the firmware update no matter what I do if I want to access my shares I have to type \\myroutersip\myshare. I have gotten so used to just going to my network places and and selecting WRT610N (which was the hostname) entering my predefined password,and accessing my share. How do I fix this? I thought about enabling/editing the hostfile, but I should not have to do that (at least I didn't before). If anyone knows how to accomplish this please reply. TIA

There is no such settings your router, which will disable your access to the Drive by the Host name.If you have any Firewall or Antivirus you can disable it and try accessing your Drive with the Host name.May be you can try one settings on your router, Login to your router setup page, click on the Storage Tab and Below you need to click on the Sub tab "Media Server" and Enable "UPnP Media Server" and click on Save Settings. I think this might solve your problem.

Some start up questions (help please)

Hello everyone. My name is Tom and its very nice to meet everyone.
I have been, historically, using harware sequencers for my music (Korg M series, Korg O series, and most recently a Fantom X7).
I have decided that I want to go the DAW route for my music for various reasons. At any rate here is what I'll be ordering next week....
MacBookPro 2Ghz 15" (1 gig of ram to start 2x 512)
Logic Pro
M-Audio Keystation Pro 88 (my main instrument is piano)
M-Audio Oxygen 8 v2 (I'll use this for synth sounds, strings, brass, triggers, etc)
Presonus Firebox (portability)
SIIG FireWire 800 1-Port ExpressCard/34 (the MBP only has 1 Firewire port)
My Book Pro Edition 500 GB Ext HD (will connect to the FW 800 expresscard)
Pair of Behringer Truths B2031a (I listened to these in a local store and I was really impressed.)
I have various other instruments that I will use (guitars, bass, steel, etc) during recording but those arent the focus of these questions.
To the point...
1. Should I connect both Midi In and Out for the Keystation Pro?? (The midi thing is somewhat new since I'm coming from the hw sequencers and I never midi'd my boards together) I understand that I'll go from the midi out to the s/pdif cable in but will it be necessary for information to be returned to the ks pro?
2. On the Presonus Firebox, is the s/pdif cable included with the interface??
3. Any general impressions with my initial setup?? Please keep in mind that I will do all the music by myself... one track and one instrument at a time. (Which is why I thought the firebox would be sufficient for my needs) Any concerns with my ideas for setting it up?? KS Pro midi'd to presonus. presonus FW 400 to Mac. Oxygen 8 USB'd to Mac. My Book hard drive FW 800 through expresscard expansion. Will I have any compatibility issues or conflicts?
Thanks so very much for any help and guidance.
Tom

Hi Tom
Welcome to the forum!
1) your keystation and Oxygen 8 will send and receive midi to Logic thru your usb connection. You can connect any other midi devices thru the keystation or using the Oxygen or Firebox midi ins & outs. Logic will recognize all of your midi connections. you just need to assign which midi keyboard or other outboard device is connected to which midi port in Logic's environment
2) yes the spdif cable is included
3) Your setup sounds nice. I personally don't like the firebox, I had one for a short time and got rid of it, but I know a few guys here use one and like them.
Have fun
Don

Memory Question Help Please

Alright ive never really been to smart on memory and how it runs and all that. The Question is I have a gig of ram on my mac book but right now it says only 30 mb is free
wired: 221mb
active: 524mb
inactive: 247 mb
used: 993mb
now is that normal cause i mean im hardly using anything im using like safari, aim, and itunes. seems like more memory should be free and crap.

Hi,
here is link toe help you understand better:
http://docs.info.apple.com/article.html?artnum=107918
Good Luck

New to Solaris question help please

Just successfully installed Solaris 10 on VMWare ESXi and assigned it 50GB of HDD space. When I type df -h I see that 79% of my disk is used and the rest of the storage is nowhere to be found.
I'm new to Solaris is this because the rest of the drive hasn't been partitioned? Some help would be greatly appreciate so that I can take advantage of the rest of my volume...
Thanks!
Filesystem size used avail capacity Mounted on
/dev/dsk/c0d0s0 7.9G 6.1G 1.7G 79% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 1.5G 880K 1.5G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/usr/lib/libc/libc_hwcap1.so.1
7.9G 6.1G 1.7G 79% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 1.5G 2.2M 1.5G 1% /tmp
swap 1.6G 84M 1.5G 6% /var/run
/dev/dsk/c0d0s7 7.9G 8.0M 7.8G 1% /export/home
/dev/dsk/c0d0s6 6.8G 7.0M 6.8G 1% /export/software
/hgfs 16G 4.0M 16G 1% /hgfs
/tmp/VMwareDnD 0K 0K 0K 0% /var/run/vmblock

I don't recall allocating anything during installation.Which means that you did a default installation with no customization. Looking over your file system layout confirms this.
I have an update df -h listing as well (I installed on a different system)
# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 4.6G 4.0G 596M 88% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 1.7G 868K 1.7G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/usr/lib/libc/libc_hwcap1.so.1
4.6G 4.0G 596M 88% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
swap 1.7G 120K 1.7G 1% /tmp
swap 1.7G 24K 1.7G 1% /var/run
/dev/dsk/c1t0d0s7 44G 245M 43G 1% /export/home
From this, I understand that /dev/dsk/c1t0d0s0 has a size 4.6GB (assuming the OS is installed here) when I download items to the desktop, it appears they are placed in this "disk"?Depends on where you told Firefox to place them by default. You could just as easily configure it, Edit, Preferences, Main, Downloads, tell it to place the downloads somewhere else.
> Also, /dev/dsk/c1t0d0s7 is where 44GB of free storage resides, I believe this is located in /export/home (as a folder with 44GB of space available) as far as my knowledge of Solaris is concerned.
Correct. Solaris is a multi-user system that leaves plenty of space for user home directories which default to /export/home. IMNSHO the space that is leaves behind for / is usually small enough to make the system unusable after applying only a few patches. If you switch to OpenSolaris 2008.11 you can ZFS which will mitigate most of these problems.
Just a little confusing to a newbie, coming from a Microsoft background (forgive me!) I am used to seeing volumes as icons in My Computer.The Windows tool for managing disks is nice and graphical.
What's your advice for managing volumes, formating to ZFS, maybe some visual method of understanding volumes?If you haven't done much with the system then you might consider switching to OpenSolaris with the caveat that some parts of Solaris are not available in OpenSolaris because of licensing issues. However, for someone who's just starting out you won't miss them.
For understanding, http://www.docs.sun.com / Solaris / Administration and then look for the two books on Disk Management. One is for ZFS and the other is for UFS. ZFS and Volume Manager Administration
alan

IPAD and UPdate to Airprint Printer question Help Please?

I have an HP 6500 printer that I utilize with my MacbookPro (from 2007) and it operates just fine wirelessly using WiFi at home. I did note though that my iPod cannot print to the printer as the printer IS NOT AIRPRINT equipped.
MY QUESTION?
I am considering purchasing an IPAD MINI (RETINA)equipped with KeyNote, Pages, etc., and am wondering If I invest in an AIRPRINT equipped printer in order to enable printing from the IPAD MINI, will I also still be able to print from my Macbook Pro (2007) which is not equipped with anything that interfaces with AIRPRINT to my new AIRPRINT printer? In other words, is this reversed engineered to allow printing from an older laptop to a brand new AIRPRINT printer?
Hope you can help, so I don't waste money on a new printer and an IPAD only to find out I can no longer use my LapTop (MacbookPro) to print.
Thanks you for any help.
Charles

Thanks, Jim.
Going to give it a try, Now, after reading all the reviews on the various HP and Epson model all-in-one printers, my next chore will be to make the actual selection. It seems that there as many people who love each unit as there are who hate each unit. Confusing, but I will digest it over the next several days and make a choice.
Thanks again,
Charles

Simple java question, help please

please help
-i am just starting out in java and im havin an early problem. Im trying to run a small java script from a commant prompt but im getting the following error after i enter this command at my prompt
c:\javatest>javac HelloARP.java
javac is not as an internal or external command, operable program or batch file.
when i enter
c:\java -version
i get the following message: registry key software\javasoft\java runtime enviornment\current version has value of 1.1 but 1.4 is requiured
error: could not find java.dll
error: could not find java 2 runtime enviornment
-im sure this is a simple error on my part. all im trying to do is run my first lil program that i saved in notepad, its only 5 lines long. here is the lil test program im trying to execute
class HelloARP {
public static void main (String[] arguments) {
System.out.println("What's good ARP?");
- all responses and help are welcomed. Thank you ahead of time for anyone that can help me get started.

Hi
First of all uninstall your current JDK installation, if you can get to the registry delete the registry entries for the old version of java which was there on your machine.
Now do a fresh install of your j2sdk1.4.1, make sure that you will install the JRE with the J2SDK1.4.1.
Once you are done, set your classpath in autoexec.bat if you are using Windows 95/98
or set your environment variables if you are using Win NT/2000/XP.
If using solaris or other unix flavors see the included installation instructions provided.
Let me if you face the same problem.
Thanks
Swaraj

Play button AS2 not working need help please!

Hi,
I have an AS2 project with two scenes, Scene 1 is has a pre-loader and Scene 2 has an embedded .flv animation from after effects with some other basic tweened shape layers and masks. I've used the Components UI and dragged a "Replay" button to the last keyframe with a seperate actions layer with the following code:
stop();
Replay.addEventListener(MouseEvent.CLICK, replayMovie);
function replayMovie(evt)
gotoAndPlay("Scene 2",1);
I'm a beginner in Flash and have been following instructions off the net but I can't get it to Replay the movie when the button is clicked, it does nothing
any help will be appreciated.

Hi,
I would not reply on the scene naming thingy if I were you. IN the pat I have had the very same problem and found that using
_root.gotoAndPlay(frameNumberHere); works a lot better.
ALSO
if your scene 1 has 10 frames in it and your want to gotoAndPLat the 1st frame of your second scene then use:
var number_of_Frames_in_1st_scene = 10
var frame_I_want_to_go_to_and_play_in_my_second_scene_is = 1
var frameNumber = number_of_Frames_in_1st_scene + frame_I_want_to_go_to_and_play_in_my_second_scene_is;
_root.gotoAndPlay(frameNumber);
dont forget the _root.

Complete newbie. Help please?

I am using Flash CS3 and Action Script 3.
What I'm trying to do is to have the playback jump to
different parts of the timeline when an arrow key is pressed.
I have found some code on the internet somewhere (I can't
remember what that was, so that is rather annoying) that does what
I want to happen, but when you click the mouse.
The code that I have is attached, and is probably complete
gobbledygook.
I know that the two parts are different. I'm debugging it a
line at a time.
My problem is that on line 33, the debugger wants me to have
a "{" before "function", but when I do that, it tells me that there
are extra characters after the end of the program. I have deleted
the text after and the "{" in question, and it runs what is left.
I am at a complete loss.

Hello! There seems to be alot wrong, so I don't know if I'll
get you up and running, but I'll try.
First of all you are stating "override function" for the
first 2 functions. This is only ok when you use it inside a class
(I assume you are coding on the timeline right?), so get rid of the
override.
Secondly I am not really sure what you are trying to do with
this part of your code:
addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
keyDownHandler {function event
(keyCode)==Keyboard.LEFT):void;{
gotoAndStop:(20);
addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler2);
keyDownHandler2(event )(keyCode==Keyboard.RIGHT);{
gotoAndStop:(30);
Are you trying to specify another 2 functions (you'll have a
naming conflict then as keyDownHandler and keyDownHandler2 are
already in use) or are you trying to call the above functions?
Third there are little flaws like gotoAndStop:(30); which
should be gotoAndStop(30); and some semicolons too much.
Hope that helps a little.

CS3 Questions, Help please?

I've been gone for a while and I used to know this stuff backwards and forwards. Now that I have come back, I just can't seem to remember some things re. InDesign and shortcuts and keys. I've tried going to help but these don't come up in help and I did not get a book with CS3. I set my shortcut prefs to shortcuts for Quark 4 as in past.
1. Is there a way to get the display preference to default to high quality display so it is there all the time?
2. Where is the default for copy and then the paste going in front instead of pasting in back.
3. I can use my shift/command/> to increase font size (and where is the preference for changing it by 1 point instead of 2 please) but the shift/command/< is not working at all.
4. I have some documents that when I try to increase the leading by 1 point, the leading is increasing drastically almost as if there is a lock to some grid on but all the lock to grids and lock to baseline are not selected. I don't know who created these documents but I cannot find where they appear to be locked to grids. Any ideas.
Thank you in advance for any help. I've been going thru tutorials but can't find the answers to these and I used to know these so well.

Ann, I responded to your other query too, but are you sure you don't have "Paste Remembers Layers" turned on? If stuff you copy is on a layer that is behind something else, it will still be behind it after pasting because it will paste to the layer behind.
Check your Layers flyout menu to see if this is the case.

PCS3 to PCS4 Mac Newbie Question/Help

Hello. I recently bought my first Mac (a MacBook) and I'm wanting to download Photoshop CS3 Extended, but now there's the new PCS4. On my old computer which is a Dell, I had PCS3 Extended and I have the serial number. My question is if I download the trial version of PCS4 Extended on my Mac, can I still use the same serial number to activate it or will I have to buy PCS4 Extended for Mac? I'm somewhat confused, but I appreciate any help.

No, you cannot use a Windows license on a Mac.
You need a new license for your Mac.
If you are not going to keep the Windows version, you can contact Customer Support and ask for a cross-grade. It involves a letter of destruction of the Windows version and paying a nominal fee (under $10) for the cost and shipping of the new media. Actually, since you're coming from CS3 you will be charged the Upgrade price ($200 or so).
If you want to keep on using a Windows version, then you must buy a new version for the Mac at full price.
Message was edited by: Ramón G Castañeda

CS4/AS2.0 Newbie Question.. help please?

Similar Messages

Maybe you are looking for