CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough MEMORY ERROR MESSAGES

http://forums.adobe.com/message/3469769
I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
Seems very few Adobe CSx users use Bridge....go figure!
Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
Refer to the above link for original question and all pertinant computer data.
Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
Any help would be appreciated.
I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
Dan

Apparently not. I'm still seeing it in the Photoshop Windows forum - though it's anyone's guess WHAT you'll see with this Jive Turkey forum software.
-Noel

Similar Messages

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.

CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough Storage/Memory"??

This subject was originally posted in the Adobe>Windows forum but Adobe employee thought it best that I repost here.
http://forums.adobe.com/message/3469769
I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
Seems very few Adobe CSx users use Bridge....go figure!
Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
Refer to the above link for original question and all pertinant computer data.
Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
Any help would be appreciated.
I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
Dan

Ok on ampersand meant
just what you adivised...I will not use that character again.
Time wise..10-15 minutes usually but this is an "ungageable" factor. I don't clockwatch to see when failures reoccur.
User security=if you check the right suggestion/similiar thread pane on anyone post, Adobe links similiar threads that might help. A few have been relating the same problem to how user security is setup within Windows.
Permissions for security for users for each disk is here and it was mentioned that some "permissions" were not checked(allow/deny).
By allowing the permissions it could help sand it appears in my case under the "Group or User Name">Users that some categories were not checked that thread mentioned aboved, if changed to "Allow" granted more control.
The path control, aka "My Book", is where the images were stored(External HD) and moved to the new computer. As I mention in my initial post, this is where the images are stored and the reason I am moving them to more accessable file names.
"My Book" will be deleted when all files have been moved. Hence that path will no longer exist I believe.
The file structure withing either "MY Book" or Windows is what is creating the where the files are stored. I did not customize that flow because I was unaware that this might incurr any problems.
Thanks!
Dan

I receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.

I performed a clean install of Lion, then upgraded to Yosemite. Now, i am trying to restore files and programs from my backup in my time capsule but when i connect to the backup folder i receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.
I previously had mavericks installed and was able to backup and restore just fine. I do believe that within the time since i last performed a backup or restore there was an update for the time capsule that i ran using my iPhone. I need a solution to this issue.

Yosemite can take a very long time to index the backup.. and it seems to be impossible in my own testing to get back beyond the latest one.
If you cannot manage a migration.. which I guess is what you are trying to do.. see if you can do a full restore to a USB drive plugged into your computer.

When connecting my external hardrive to my mac, I can't copy files onto it or off of it. It gives me the message 'the operation cant be complete because you dont have permission to access some of the items' It has also been formatted to a mac.

It gives me the message 'the operation cant be complete because you dont have permission to access some of the items'
I tried to even format it to a mac to use it with time machine but it is saying i dont have ownership. I am gettin really frustrated with this, please help

Then use a proper backup application.
Periodically using drag & drop isn't very reliable or complete, and backing-up your entire system is much better than just some selected data. When your internal HD fails (they all do, sooner or later) or something else awful happens, reinstalling everything can be a very large, tedious, and error-prone process. Among other things, 3rd-party apps will have to be reinstalled from the original discs or re-downloaded, and purchase keys or serial numbers re-entered.
You already have Time Machine -- it's built-in to OSX, and very easy to use. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
And/or, you can use a 3rd-party "cloning" application such as SuperDuper or CarbonCopyCloner. See Time Machine vs. Clones and Archives for an overview of the differences.

In trying to update to Firefox 3.6.11 on an intel mac g5, I get this message: the operation cannot be completed because you do not have sufficient privileges for some of the items -- any suggestions? thanks!

In trying to update to Firefox 3.6.11 on an intel mac g5, I get this message: the operation cannot be completed because you do not have sufficient privileges for some of the items -- any suggestions? thanks!

You can try to repair the permissions for the Firefox application files and folders.
You can also do this:
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I am getting an error message when i try to export "Not enough memory" what do it do?

I am getting an error message when i try to export "Not enough memory" what do it do?

Your 400GB is not what I was speaking of. I was not speaking of disk space. I was speaking of memory.
The memory in your computer needs to be 8GB or more, and you must have a 64 bit operating system (which can still happen even if your computer is less than 12 months old). What operating system do you have? Is it 32bits or 64bits?

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

INTERNAL ERROR & NOT ENOUGH MEMORY error

Somehow 4 gig of memory is not enough!!
I am on Win Vista ultimate. intel Core 2 Duo 2.66 4 BG of
Ram.
And I'm working on a local hard drive with fat all else
running
I constantly get "Internal Error occurred...could not complete
request"
particularly alarming if that request was to save!!!!. I have
been using the 'fireworks autobackup" air app...save me heaps of
time...But its taking longer and longer to save the file as I work
on it.
If i save every 10 minutes !!!! its taking 1:20 to save..this
is 12% of my time...FW STILL sucks memory somehow..
any one with solution to this!!!???
Ive also had the "not enough memory" error a few times..In
which every thing done on the file is lost since last it was
opened...whether I saved it a million times or not. I've started
making copy backups and restarting FW every few hours to purge the
memory..but this sucks. This memory leak seemed to be mostly gone
in CS3 according to others so assumed CS4 had it sorted

One of our users is running across a similar issue using the
pen tool. A file that's 3000x2000 having sections cut out using the
pen tool will spike FW up to 2gig of used ram. Eventually the
Internal Error messages will start but, you can still trace your
path. The issue is it pops up every time you click a new point. The
only current work around I have for the user is to shrink the file
or decrease the dpi. Has anyone else run across this?
Specs
XP SP3
Core2 3.0ghz
4 gig ram.

Not enough memory error when passing an array to a chart

Hello.
I am trying to pass some data from a reading loop to a display loop using queues and charts.
In order to save on redraws I am reading the queue just once a while, flush it and pass the resulting array to the Chart. It is actually an array with clusters of three values.
Everything works fine unitl I actualy want to display the chart. I can pass the data and see it using an indicator without any problems.
When I wire the data to the chart it randomly shows : "not enough memory to complete this operation"
The fact is the array being passed to the chart is of random size.
The queue size is good for about 20 min. Labview shows an error after a few seconds. After clicking ok it prints out the results correctly and then a second or two later same error.
What am I missing here? Thanks
LV 2012 f3 I7 2.4GHz 16GB RAM
Attachments:
TestChart.vi ‏17 KB

Not sure if it helps or not but here is the error.
I put about 200 elements/s in the queue. That is why instead of reading it 200/s I just want it to read it once a while.
I am not sure what is a bigger burden:copying one 500 elements array twice a second or 200/s and 200 calls to the Queue.
The max size of the queue is not important here. I can set it to something more reasonable and will get the same error.
What will happen to my CPU usage if I put the Chart in the for loop and make 500 call to it? And then half a second later another 500 calls?
As I said at this point I do not know how much history I need or not but all I want is to be able to see a few s of it. If I loose the rest it is ok for now.
Lets says that all I care is to see it close to real time with a history of 5s. It would mean the queue buffer size of 1000.
Back to the main problem: why do I see the memory error window when I know clearly that I have plenty of memory left.
Attachments:
Error.jpg ‏18 KB

Could not complete the command because there is not enough memory (RAM)

Hi Folks:
I am running into an error (Could not complete the command because there is not enough memory (RAM)) when trying to open any file of any size or any format.on my Mac.
This error occurs when:
No other applications or files are open
Upon a fresh reboot
After Repairing Disk Permissions
The files can be opened by Fireworks and other image editor apps or video apps
My SPECS:
OSX 10.5.8
4GB 667 MHz DDR2 SDRAM
120.41 GB Free space available
Graphics: GeForce 8600M GT - VRAM 512 MB
PhotoShop settings:
Available RAM 3072 - Let PS use 90% (2764)
I really appreciate the help.

http://forums.adobe.com/thread/370739?tstart=0
http://forums.adobe.com/thread/370735?tstart=0

Why "not enough memory" error when saving edited files?

I've been editing photos from one folder and saving them to another, hundreds of them. Suddenly when I tried to open Photoshop Elements 9 from the raw editor I got an error that says "could not complete the command because there is not enough memory." I have noticed that when I go back and open a photo from the first file that I've already edited, the changes are applied to that file, even though I saved the edited file into the second folder. What can I do? I don't really want the photos in the first folder edited, just the ones in the second, and I don't need to store all my changes in memory. I still have hundreds to edit.

Is there a simple way to get back to my original RAW files in folder 1, without the edits that have been made applied to them?
The simplest way is to change your mindset, and say ... hey, no problem, that's the way the PSE RAW editor works, I will leave things as they are.
What could be simpler, you basically have to do nothing?
(And by the way, I say again that your original RAWs have NOT been changed in any way).

Troubleshoot not enough memory error

I am getting a not enough memory error, and while there are tons of posts about this on the forums, I had some additional questions. First, I have two cRIOs, and think the error may have been thrown by one of them. Is this even possible though? I'm trying to narrow down which exe the error may be in. Second, does anyone have an order of steps they take when they get these errors in order to troubleshoot them?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.

Found the REAL problem! I was not reading my header correctly, this resulted in type casting the wrong bytes of data. Every now and then I would be type casting bytes of data that when type casted from a string to a I32 resulted in a number around 17 million. I am assuming the TCP read tries to malloc this memory (or new if its c++ ) and was unable to do so. That's why I got the not enough memory error. When I started reading my TCP bytes correctly, the error went away.
CLA, LabVIEW Versions 2010-2013

P800 "Not Enough Memory" error when trying to use Contacts

Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
This is getting really frustrating! I want to downgrade...

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough MEMORY ERROR MESSAGES

Similar Messages

Maybe you are looking for