CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough Storage/Memory"??
This subject was originally posted in the Adobe>Windows forum but Adobe employee thought it best that I repost here.
http://forums.adobe.com/message/3469769
I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
Seems very few Adobe CSx users use Bridge....go figure!
Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
Refer to the above link for original question and all pertinant computer data.
Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
Any help would be appreciated.
I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
Dan
Ok on ampersand meant
just what you adivised...I will not use that character again.
Time wise..10-15 minutes usually but this is an "ungageable" factor. I don't clockwatch to see when failures reoccur.
User security=if you check the right suggestion/similiar thread pane on anyone post, Adobe links similiar threads that might help. A few have been relating the same problem to how user security is setup within Windows.
Permissions for security for users for each disk is here and it was mentioned that some "permissions" were not checked(allow/deny).
By allowing the permissions it could help sand it appears in my case under the "Group or User Name">Users that some categories were not checked that thread mentioned aboved, if changed to "Allow" granted more control.
The path control, aka "My Book", is where the images were stored(External HD) and moved to the new computer. As I mention in my initial post, this is where the images are stored and the reason I am moving them to more accessable file names.
"My Book" will be deleted when all files have been moved. Hence that path will no longer exist I believe.
The file structure withing either "MY Book" or Windows is what is creating the where the files are stored. I did not customize that flow because I was unaware that this might incurr any problems.
Thanks!
Dan
Similar Messages
-
http://forums.adobe.com/message/3469769
I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
Seems very few Adobe CSx users use Bridge....go figure!
Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
Refer to the above link for original question and all pertinant computer data.
Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
Any help would be appreciated.
I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
DanApparently not. I'm still seeing it in the Photoshop Windows forum - though it's anyone's guess WHAT you'll see with this Jive Turkey forum software.
-Noel -
I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.
Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.
-
I performed a clean install of Lion, then upgraded to Yosemite. Now, i am trying to restore files and programs from my backup in my time capsule but when i connect to the backup folder i receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.
I previously had mavericks installed and was able to backup and restore just fine. I do believe that within the time since i last performed a backup or restore there was an update for the time capsule that i ran using my iPhone. I need a solution to this issue.Yosemite can take a very long time to index the backup.. and it seems to be impossible in my own testing to get back beyond the latest one.
If you cannot manage a migration.. which I guess is what you are trying to do.. see if you can do a full restore to a USB drive plugged into your computer. -
The computer is
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Bridge is acting real funny lately: It won't close, so I have to force quite, then I get the error message: "The operation could not be completed. The file is Locked"
Thread 7:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x00000001006ae71e boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 332350
3 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
4 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
5 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
6 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 8:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x000000010066b372 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 56978
3 com.adobe.bridge5 0x000000010066939d boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 48829
4 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
5 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 9:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011ebce948 void boost::condition_variable_any::wait<boost::unique_lock<boost::mutex> >(boost::unique_lock<boost::mutex>&) + 80
2 SwitchBoardClient 0x000000011ebc2cc8 adobe::switchboard::ConnectionQueue::run() + 300
3 SwitchBoardClient 0x000000011ebc78a3 boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>::operator()(adobe::switchboard::ConnectionQueue*) const + 97
4 SwitchBoardClient 0x000000011ebc7911 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011ebc794e boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011ebc796c boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011eb66a41 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 59
2 SwitchBoardClient 0x000000011eb89433 adobe::switchboard::Client::run() + 111
3 SwitchBoardClient 0x000000011eb91e05 boost::_mfi::mf0<void, adobe::switchboard::Client>::operator()(adobe::switchboard::Client*) const + 97
4 SwitchBoardClient 0x000000011eb91e49 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Client>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011eb91e86 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011eb91ea4 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 11:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 12:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service<b oost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 13:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 MultiProcessor Support 0x00000001165ac113 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 139
2 MultiProcessor Support 0x00000001165ac1d0 ThreadFunctor::operator()() + 92
3 MultiProcessor Support 0x00000001165c8f70 thread_proxy + 160
4 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
5 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 14:
0 libsystem_kernel.dylib 0x000000010a9894de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x000000010a98864f mach_msg + 55
2 com.apple.CoreFoundation 0x0000000106e8fb34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x0000000106e8effb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x0000000106e8e858 CFRunLoopRunSpecific + 296
5 com.apple.AppKit 0x0000000101fac33b _NSEventThread + 137
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 15:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 16:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 17:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000001 rbx: 0x0000000123d20ff0 rcx: 0x0000000023d20000 rdx: 0x0000000000000000
rdi: 0x0000000000000000 rsi: 0x0000000000000067 rbp: 0x00007fff5fbff880 rsp: 0x00007fff5fbff870
r8: 0x0000000111d0da00 r9: 0x0000000000000600 r10: 0x0000000012e3bdbc r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x00000000000000ce r14: 0x0000000000000067 r15: 0x0000608000018700
rip: 0x000000010495a94d rfl: 0x0000000000010202 cr2: 0x000000000000003c -
Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestionsThis is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
ditto [-v] [-V] [-X] [<options>] src ... dst_directory
ditto [-v] [-V] [<options>] src_file dst_file
ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
ditto -h | --help -
IMovie error message "The operation could not be completed"
I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
ThanksMy problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with. -
When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.
Some other things to look at.
https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50 -
Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).
That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT -
When I try and move an application to my application folder from the installer and when I try to empty the trash, I get the error message, "The operation can’t be completed because you don’t have permission to access some of the items." This has only been an issue since I upgraded to Lion. I'm using a July '07 white Macbook 2.16 Intel Core 2 Duo. In my trash I only have an older version of a software that I updated (Divy). The software I'm trying to install is Angry Birds Rio.
Always use the same websites you are having problems with so you can monitor the changes.
Try the reset for Safari:
And for Firefox:
http://www.ehow.com/how_6874158_keyboard-working-certain-websites-firefox.html
Try logging in to the guest account as well to see if you have the same problems there, it might be a logging in issue. -
Every time I try an update I keep getting the error message
"The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)."
Once I get this error message and try to update again, I get told there are no updates. I have to cancel the first attempted update and close all message windows before it lets me try again, and guess what, same error as above.
Is anyone else having this problem, or know how to fix it.
Not sure at the moment if this is an Apple related problem or a problem with my machine, but everything else worked ok, including an earlier update to iPhotoUse this link instead:
http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg -
I receive an alert from ITunes that there is an update available. When I go to the updates in ITunes I receive the following error message:
The operation couldn’t be completed. (NSURLErrorDomain error -1012.).Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
It gives me the message 'the operation cant be complete because you dont have permission to access some of the items'
I tried to even format it to a mac to use it with time machine but it is saying i dont have ownership. I am gettin really frustrated with this, please helpThen use a proper backup application.
Periodically using drag & drop isn't very reliable or complete, and backing-up your entire system is much better than just some selected data. When your internal HD fails (they all do, sooner or later) or something else awful happens, reinstalling everything can be a very large, tedious, and error-prone process. Among other things, 3rd-party apps will have to be reinstalled from the original discs or re-downloaded, and purchase keys or serial numbers re-entered.
You already have Time Machine -- it's built-in to OSX, and very easy to use. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
And/or, you can use a 3rd-party "cloning" application such as SuperDuper or CarbonCopyCloner. See Time Machine vs. Clones and Archives for an overview of the differences.
Maybe you are looking for
-
Internet connection failing dozens of times daily for weeks now
My computer's connection to the Airport Express base station has no problems at all. But the internet connection goes out literally dozens of times a day (at no predictable schedule); this has been happening for almost a month. I originally thought t
-
Is there a significant compatibility error between iTunes 10.3 and Windows 7?
My computer has locked up several times now while running iTunes 10.3 on my pc that has windows 7 on it. This problem doesn't occur anytime other than when I'm running iTunes. I feel like that suggests that iTunes is the source of this problem. Is
-
ITunes shows syncing in progress, but when finished my ipod shows nothing.
This is starting to get me very upset and Im not too happy. I just restored my Ipod and updated to the newest version of iTunes. When I connect my ipod to iTunes, everything shows up fine, it shows on the iTunes that all my songs are being written to
-
Fedora core 6 sun app server won't start
Sun app server 8.2 bundled with creator 2u1 doesn't start. This install was running fine under fc5. Among other things I get the following with pe-start -reset which I think might be the crust of the problem: "Unable to read system environment. No sy
-
Trigger Idoc by using the Output type in Z function module
My requirement is when I run Z function module then Idoc should be send which is configured in Output Type. Means when ever i run the Functional module that Output type should be triggered.? Does any one have solution??