CS4 Bridge opens 16bit, is resizing without input from me

Photoshop expert changed settings on me, Bridge now opens all photos in 16bit, I don't know how to change back to 8bit automatic opening like it used to be. Now there is a new after three years of no such problem: I convert a 8x10 to 8 bit, change rez to 72 dpi from 240dpi, save it but when I reopen it it's back to 240dpi and a thumbnail size. Cannot get size/rez changed. Where do I start? 10.8 Mac equipment, these are all new problems with no changes I'm aware of.

Photoshop expert changed settings on me, Bridge now opens all photos in 16bit,
I don't know how to change back to 8bit automatic opening like it used to be.
When opening a Raw file in Adobe Camera Raw (that is the plug in that is
used by both PS and Bridge to convert Raw files) there is a small blue line
at the bottom of the window. Inhere is a menu where you can change the
setting back form 16 to 8 bit, also the default dpi setting can be set here.
Now there is a new after three years of no such problem: I convert a 8x10 to 8
bit, change rez to 72 dpi from 240dpi, save it but when I reopen it it's back
to 240dpi and a thumbnail size. Cannot get size/rez changed. Where do I
start? 10.8 Mac equipment, these are all new problems with no changes I'm
aware of.
You need to be a bit more specific inhere, do you use PS to change the
size?, can you describe exactly what you do to change it?

Similar Messages

Can anyone help me keep wifi off on my S5? Since the last update my wifi keeps turning on without input from me. I have unlimited data and don't use the wifi much to extend the battery but this is killing it now.

Can anyone help me keep wifi off on my S5? Since the last update my wifi keeps turning on without input from me. I have unlimited data and don't use the wifi much to extend the battery but this is killing it now.

Help is here to resolve this issue with your wifi connection 88DaveS. Lets try disabling your "Smart Network Switch". Select Settings> Wifi. The 'smart network switch' is in the advanced settings. Locate the Menu icon in the upper right hand corner > Tap Menu > Tap Advanced > Locate and ensure the check box is Unchecked next to Smart network switch. Let us know if this helps.
KinquanaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

CS4 Bridge Opening Directory

Is there a way to configure Bridge to open with the last used directory? My Bridge opens to the directory it was on when I first saved my workspace and I would like it to open with the last used.
Burton Stuttman

John & David
Do you have bridge set to launch at start up?
I do and have found that if you want it to open in your last used folder,you need to exit bridge before you shut down not just close it.
I think bridge should automatically exit at shut down making one less step for the user.
D

WinVista CS4 Bridge opening to PhotoShop problem???

I am doing a Total Training class on CS4 PhotoShop Essentials ... great class btw ... and instruction for Bridge says to double click on the file to open said file in PhotoShop. This doesn't work ... known problem??? I am using the latest updates as of yesterday in Win Vista.
Any thoughts???
Thanks,
Sherry

This is definitely your problem. Have never played with the file association page so can't say for sure what to do. Might press "reset to default associations" as that is safe. If that does not correct it, suggest you look in knowledgebase search for file associations and see what they suggest.

Hotsync User ID being changed without input from me!

As far as I know -- with evidence in my data directories -- when I got my Tungsten I set it up with the user name "Wendy". A couple of days ago, when I got a handheld software registration code based on giving that to the software vendor as my user name, it would not work. When I investigated I found that the Hotsync User ID in my desktop software was "2008". Today, New Year's day, when I went to open another desktop component, SplashID, I found that all the data was gone. Lo and behold, when I went to do a restore, I found data folders for Wendy, 2008, and 2009! I then looked at the Palm desktop app and found that the Hotsync User ID there is now "2009"! Why is this happening and what can I do to nail down the user ID that I want?
Please note that I have also been suffering from periodic loss of my non-recurring calendar data. It seems to occur whenever an overnight Windows update takes place that causes my computer to reboot. Using the advice given in the posts responding to my previous message in these help forums, I have -- so far -- always been able to restore the data. I do not recall whether this and the change of hotsync user name started at the same time.
Post relates to: Tungsten E2

Look on your handheld in hotsync and verify the hotsync name in the upper right corner. This is the name hotsync and Palm desktop usues to ID the handheld for sync'ing.
At this point, I am not sure what is causing the username to change.
Are you using Palm desktop 6.2? If you are then you need to close Palm desktop if you are not using it. If you leave it open during a system, virus, or any other type of update, it can cause loss of data. This usually occurs with Palm desktop 6.2.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=tungsten&mn=e2&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Starting over after Hotsync User ID being changed without input from me!

I posted the following message in the Hotsynch section of these forums on Jan 1 and have not yet had an answer; since then the situation has changed, but I want to provide the original circumstances as background:
As far as I know -- with evidence in my data directories -- when I got my Tungsten I set it up with the user name "Wendy". A couple of days ago, when I got a handheld software registration code based on giving that to the software vendor as my user name, it would not work. When I investigated I found that the Hotsync User ID in my desktop software was "2008". Today, New Year's day, when I went to open another desktop component, SplashID, I found that all the data was gone. Lo and behold, when I went to do a restore, I found data folders for Wendy, 2008, and 2009! I then looked at the Palm desktop app and found that the Hotsync User ID there is now "2009"! Why is this happening and what can I do to nail down the user ID that I want?
Please note that I have also been suffering from periodic loss of my non-recurring calendar data. It seems to occur whenever an overnight Windows update takes place that causes my computer to reboot. Using the advice given in the posts responding to my previous message in these help forums, I have -- so far -- always been able to restore the data. I do not recall whether this and the change of hotsync user name started at the same time.
When I got no answer on the forum by the afternoon of Jan2, I sought help viaPalm's online chat. The person who helped me was very patient given the profusion and confusion of user names/IDs but ultimately when I had followed his instructions re deleting Palm Desktop 6.2.2, reinstalling it and synching, the synch just hangs on the databook synch. Since then I have done a clean uninstall according to the instructions for clean Vista uninstalls posted by cygnusX1 on 12-30-2008 04:06 PM in the thread "Syncs fine -- missing all data in Desktop App". The only thing that I did differently was to use the Windows uninstall process before I started manual deletions.
My current situation: I have no Palm Desktop software installed on my Vista PC although the desktop versions of some -- but not all of other Palm apps still work. I have a backup of the "Wendy" directory with Palm data stored on my Windows desktop. I have a Tungsten E2 with calendar, addressbook, memos, todos and data from two of the Splash apps and Diet Assistant. The current name on the handheld is "2008". I would like to end up with a Palm desktop and handheld with user name "Wendy". Any advice on how to proceed to that point with minimal data loss would be appreciated..
Post relates to: Tungsten E2
Post relates to: Tungsten E2

Regarding your "Wendy" backup, is this a backup from a version of Palm desktop prior to using Palm desktop 6.2? If it is, you will need to install the version you used with the "Wendy" username. After the install, copy the username folder into the Palm folder in c-programs-palm. Open Palm desktop and see if the data is there. If you are still having a problem, create the username "Wendy" in Palm desktop, delete the username on the handheld and then when you sync it will ask for the username to sync with, select "Wendy" and continue the sync.
You can erase the username on your handheld using the procedure in the following link;
http://kb.palmone.com/SRVS/CGI-BIN/WEBCGI.EXE?New,kb=PalmSupportKB,t=ooccase,case=obj(24485)
After you go through this procedure, tap on hotsync on the handheld and in the upper right corner is the username assigned to the handheld. If the delete procedure was done correctly, there will be no username in the upper right corner. You can then sync to to Palm desktop and select the username to sync to.
If you have the data on the handheld, you may want to install Palm desktop, create the "Wendy" username in Palm desktop, erase the username on the handheld and then sync to Palm desktop.
Post relates to: Palm i705

Why do my tabs become tiled windows without input from me? I have to double-click the tab to make the windows disappear, sometimes more than once. This is annoy

This happens when I have several tabs. I'll click another tab and a tiled window appears with one window being the page of the tab and the other one the tab beside it. It's become quite annoying.

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thanks!
Curtis

Bridge CS4 always opens in the same folder

Since I upgraded to Photoshop CS4, Bridge always opens in the same
folder. It used to open up whatever folder I was working on last.
There must be a setting somewhere to tell Bridge to open the last
visited folder but I can't seem to find it. Any ideas?

Thanks Curt. That helped. I do have Bridge set to automatically start with Windows. I thought that shutting down Windows would cause Bridge to remember the last visited folder since Bridge was closed but I need to right-click on the Bridge icon in the system tray and exit before shutting down Windows. At least now I know why this was happening!

I am used to that when I open an image in Bridge it will be opened in PS, with all preferenses I have done to the image. Now it opens in PS but without any changes i have don e in Bridge. Also when I open a new image I want it to be opened in Camera Raw a

I am used to that when I open an image in Bridge it will be opened in PS, with all preferenses I have done to the image. Now it opens in PS but without any changes i have don e in Bridge. Also when I open a new image I want it to be opened in Camera Raw automatically, both if a Jpeg or Raw picture.
Using PS CC
Regards BOJ

<moved from Adobe Creative Cloud to Bridge General Discussion>

Bridge CS4 only opens PS CS4 64bit -- How to change to 32 bit?

Opening a RAW file in Bridge CS4 automatically opens Photoshop CS4-64bit (via Camera RAW). Is there any way to have it automatically open the 32-bit version instead?

I'd like the option to choose EITHER the 32-bit OR the 64-bit version for RAW or for JPGs. It is not obvious how to do this.

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Photoshop CS6 stopped working. Cannot open it. Bridge opens, but without any of my files populating it. HELP

Photoshop CS6 will not open any longer. Clicks on the icon on the desktop do nothing. Yet I was working with it yesterday. Bridge opened with my files populating it. I turned off computer hoping CS6 would reset. CS6 still does not open, but now Bridge opens without any of my files. Please HELP.
I am using Windows 7, 64 bit.

Moved to Photoshop Forums

Is it possible to have cs5 Bridge open cs4 ai files actually in cs4 rather than opening them in cs5

I recently upgraded from mac cs4 to cs5.5. Due to a bug? with cs5 ai illustrator 'Pixel Preview' won't show 1 bit tiff files as it did in cs4 (the workaround is time consuming/wasting). This is a problem for me as most of my files contain them, GGrrrr. Is it possible to have cs5 Bridge open cs4 ai files actually in cs4 rather than opening them in cs5?

Is it possible to have cs5 Bridge open cs4 ai files actually in cs4 rather than opening them in cs5?
Yes, either set the file type association in Bridge prefs for 'ai' at CS4. But it seems somewhat difficult when having newer versions, sometimes whatever pref settings in Bridge or Finder/get info/ open with/you try it keeps opening in the latest version.
In that case either drag and drop the files on the CS4 icon in the dock or with right click mouse menu choose open with and select illustrator CS4.
Although you can only have one version of Bridge open at the time you can have the other suite applications from different version open at the same time.

Why does Bridge open raw files (ndg) in Raw window even though the 'Open in Photoshop' option is...

I don't understand why in Bridge there are 2 choices, -1- Open raw and -2- Open in Photoshop and yet both choices give you the same result--The raw window opens with PS below it. After having worked on my raw NEF files I save it to dng. My thinking behind this, is that I alreay have done what was needed and would now like to start working on it within Photoshop. It seems that the only way to automatically open it directly within PS is if I save it as a tiff, psd or jpg. But since this is not what I want to do then why must I add extra steps as opposed to just opening it hwere I want. I mean the 2 choices are there, so why not do what it is being asked?

If I may step in in this discussion, I always use DNG but never have used ACR to achieve this result.
As Curt stated the changes made in ACR to a Raw file (or for that matter a DNG file) are undoable without problems.
My workflow (using Canon CR2 but that is not important, let's say a dSLR generated Raw File) is to use Photodownloader in Bridge (not perfect by far but still the best and easiest way for me).
I connect my CF card using a card reader and let Adobe Photodownloader do the work.
Inhere I use several options:
- convert the CR2 file to a DNG
- back up the original CR2 on a separate disk
- rename the DNG to yyyymmdd (shot date) and sequence number
- add a metadata template for copyright to all the DNG files.
Sorting out the keepers I open the DNG in ACR and either hit Open (for open directly in PS) or use save as Tiff or PSD depending on next step in development or simply hit Done to apply changes and leave it for later use.
The advantage of having both ACR in PS and Bridge is huge. The only difference between both is that by default PS has the Open Button selected and Bridge (open in Camera Raw) has the Done button selected, thats all.
But here is the good part, you can use both simultaneously! For example have PS in film strip mode with multiple files selected and when changes are ready hit Save as start the process but locks up PS itself. Switch to Bridge and use Open in Camera Raw and start with the next job while ACR PS is still running in the background
When I open a DNG in PS using ACR in either PS or Bridge I continue developing with actions and fine tune with layer mask, brush etc etc.
Sometimes use Save As for PSD with the layers still active (huge files) when needing to revisit or not quite ready. But mostly I use an action to flatten the files and save as PSD.
Both DNG and PSD are ending up in my archive, my clients receive whet they want, PSD, Tiff but mostly jpeg and resized.
When having the job finished and every once in a while I clear out the original CR2 files from Back up because in all the years I use DNG (at least 5 years) I never had to use the original CR2 instead of the DNG that is thoroughly backed up as is the original PSD.
But since disk space is cheap you can choose to keep them.
An other option is to include the original raw file in the DNG but I would not recommend that because the file size is getting almost twice as big.
The biggest plus side for me using DNG is that the xmp data is written directly to the file while original CR2 or NEF needs an xmp side car file next to it with this data.
However saving changes to metadata is taking a bit longer to a DNG then to an XMP side car file, depending on system resources and time this never been a real problem for me

How to get CS4 Bridge Photo Gallery into Dreamweaver?

I am a photographer who is new to Dreamweaver. I followed instructions and created a web gallery in Photoshop CS4 bridge. How do I get that into Dreamweaver???????????

Open DW.
Define your site.
Close DW
Put all the stuff that Bridge spews out into site folder - without changing the file structure.
Open DW
The tickiest part to this if you're new to it all, is defining your site. After that, if you don't have a basice grasp of HTML and CSS Dreamweaver might just turn out to be a bit trickier yet.
If you are not so sure about defining your site, Google it. There are tutorials for it everywhere!
Martin

CS4 Bridge opens 16bit, is resizing without input from me

Similar Messages

Maybe you are looking for