CS4 Bridge Star sorting system doesn't work

I have been using Photoshop and Bridge for years, but just started using Bridge in CS4 (Windows XP Pro). The sorting system where Bridge will display only those images with a specified number of stars simply does not work. I have never had this problem before, on any machine and with any version before CS4. (In other words, I know hot shi works because I've used it in CS2 and CS3, but it simply does absolutely nothing in my Bridge CS4!) Any recommendations?

I know it's curious why I'm just getting to his now. I have had the software installed for a long time. I just haven't used it.
I have been using Photoshop since PS 7, and this is a registered upgrade that I've had for quite a while. But I am slow in converting, and I have still been using CS2 up until recently. (I have some routines and actions built into CS2 that I'm not good at re-building or converting into a new version.
So be assured this is legitimate software. I'm a businessperson and I do everything legit. www.paulwphotogaphy.com
It might be because I still have CS2 and Bridge from CS2 still loaded on my PC. I don't want to lose CS2 yet. (I know, it's a familiarity thing.)
All that being said, and ideas?

Similar Messages

  • Sort function doesn't work E12

    the sort function doesn't work half the time on Elements 12 organizer.

    What about FUNCTION CLOCK_INFormula
    RETURN NUMBER
    IS
        l_hours_worked  NUMBER;
        l_to_return     NUMBER;
    BEGIN
        l_hours_worked := TO_NUMBER(NVL(:ATX_CLOCK_IN,'0'));
        IF (MOD((l_hours_worked - 0.02),0.25) = 0) THEN
            l_to_return := TRUNC((l_hours_worked - 0.02) * 4) / 4;
        ELSE
            l_to_return := TRUNC((l_hours_worked + 0.23) * 4) / 4;
        END IF;
        RETURN (l_to_return);
    EXCEPTION  
        WHEN VALUE_ERROR THEN
            RAISE_APPLICATION_ERROR ( -20100
            ,   'ERROR, Cannot represent '
            ||  :ATX_CLOCK_IN
            ||  ' as a number.');
    END CLOCK_INFormula;?
    This function assumes :ATX_CLOCK_IN is always positive.
    T.

  • SPGridView - sorting Dates doesn't work properly & how to display the title column as link?

    Hi,
    I've got a SPGridView that is being filled with data from several lists. Some of them are a date-field and a title-field. I already added sorting, paging and filtering options and at first look they seem to work fine. But now I noticed that sorting dates
    doesn't work as expected. If I select ascending sorting, the result is something like this:
    01.08.2014
    02.08.2014
    17.07.2014
    18.07.2014
    23.07.2014
    If I select descending sorting, the result is this:
    23.07.2014
    18.07.2014
    17.07.2014
    02.08.2014
    01.08.2014
    This isn't what I want obviously. 
    I just added the EventReceiver for the sorting like it is shown in several tutorials:
    (The date field is a BoundField.)
    grid.Sorting += new GridViewSortEventHandler(grid_Sorting);
    private void grid_Sorting(object sender, GridViewSortEventArgs e)
    if (ViewState["FilterExpression"] != null)
    gridDS.FilterExpression = (string)ViewState["FilterExpression"];
    And my second problem is how to add a link to the title column. In my grid I'm displaying tasks from different lists and I want to link the title to the related task. I stumbled accross HyperLinkFields and tried this:
    HyperLinkField hyperLinkField = new HyperLinkField();
    hyperLinkField.DataTextField = "Titel";
    hyperLinkField.DataNavigateUrlFields = new string[] { "Titel" };
    hyperLinkField.DataNavigateUrlFormatString = "{0}";
    hyperLinkField.HeaderText = "Titel";
    hyperLinkField.SortExpression = "Titel";
    grid.Columns.Add(hyperLinkField);
    The resulting link is something like ...sites/MySite/_catalogs/masterpage/A1-V1-2 where "A1-V1-2" is the name of the task and also shown in the title field.
    The actual link should look more like ...sites/MySite/Lists/mytasklistname/DispForm.aspx?ID=.... or something like that to display the task details. How could I achieve that?
    Thanks in advance

    http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27718782.html
    Here is the exact code you need to use:
    http://social.msdn.microsoft.com/Forums/ar/sharepointcustomization/thread/c463a8c6-4806-4233-b6a4-8db8369c5fc2
    http://sharepoint.stackexchange.com/questions/53459/change-title-linked-to-item-with-edit-menu-to-different-column
    Open the AllItems.aspx page for the specific list.
    Search for the <ViewFields> tag
    List item LinkToItem="TRUE" to whichever column you want the link:
    <ViewFields><br/>
    <FieldRef Name="Attachments"/><br/>
    <FieldRef Name="LinkTitle"/><br/>
    <FieldRef Name="linkThisColumn" LinkToItem="TRUE"/><br/>
    <FieldRef Name="data_x0020_column"/><br/>
    <FieldRef Name="Another_x0020_column"/><br/>
    </ViewFields><br/>
    http://sharepoint.stackexchange.com/questions/58954/link-title-in-list-to-value-in-url-column
    Create calculated column.
    Insert following formula -
    ="<a href='"&UrlFieldName&"'>"&Title&"</a>"
    Set "data type returned from this formula is" to integer.
    As a result on list view you will see the title with link to your url.
    UPD: It seems that URL field is not valid for calculated column, as workaround you can copy url value in a receiver into the another text field, which is not shown on the view.
    If this helped you resolve your issue, please mark it Answered

  • Help system doesn't work !

    Hi there,
    I am trying the Circuit Design Suite 13.0 and the help system doesn't work at all.
    No help from
    The main menu Help -> Multisim help F1
    In all the dialogs with a Help button. Nothing happen if I click the Help button ?
    I use Windows XP SP3 FRENCH and all the installtion went without any problems everything else is working perfectly.
    I checked in the install program if I need to install the help system separately and didn't see anything.
    Any ideas of what's goint on ?
    Thank you, bye.

    Hi Pierre,
    Are you able to manually open the help file?  Go to C:\Porgram files\National Instruments\Circuit Design Suite 13, the Multisim.chm file is the help file, double click on it and see if it will launch.  If you the file opens and nothing is displayed, google 'unable to open .chm" file, there are lots of instructions how to fix it, here is an example:
    http://www.thefinalguide.com/2009/07/unable-to-read-chm-files-on-xp-2003-vista/
    Tien P.
    National Instruments

  • AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?

    I had a bright house cable modem that also had built-in wi-fi.
    Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
    A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
    I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
    That would be correct. Hopefully, they offer this type of option for their customers.

  • HP updated my BIOS and now the sound system doesn't work on Dv76012Tx.

    HP Care / Support Assistant requested to update my BIOS, which I did.  Computer restarted a couple of times then I found my sound system doesn't work.  My computer is Dv7-6012Tx and it is just a week old.  I now get no sound, and it had been working beautifully.
    Please reset my BIOS back to how it was.

    Had the same problem as of about 30 minutes ago.  New BIOS update, sound doesn't work.  Drivers all read as up-to-date.  What the hell?

  • Transport to Consolidation system doesn't work

    First of all, sorry if this is a silly question but I have to admin I am a little missed with NWDI. Every step we did we have a new error
    In this case, we have trying to move a iView using NWDI and process to transport from
    Development Environment to Consolidation doesn't work.
    We have done all steps to deploy changes in Development and iview
    has been updated correctly. But then, when we release the DC in NWDS
    and go to Transport View - Consolidation tab and we do the import
    althougth we have a successfully message with "Import Finished", the
    iview has not been updated in Consolidation system .
    We have doublechecked server, port and SDM password in Runtine System
    tab for this server and everything is OK.
    I have analyzed all logs generated during Import process in Transport
    Studio and no error is showed.
    I have find in CBS Consolidation builspace and we don't have any activities pending, and additionally the DC doesn't appear in this buildspace. However in Development buildspace it is.
    Could somebody help us putting some ligth on it? Where can I to try to obtain log information about why this change is not moved to Consolidation?
    Thanks in advance.

    Hi Javier,
    I have sometimes a similar problem: we are developing WebDynpro applications. The activities are checked in and transported correctly, but on the destination system only the old release shows up.
    My solution of this situation is not elegant, but effective (steamroller tactics or in german "Holzhammermethode"):
    - Log on to the console of the machine where your destination system for your deployment is running. Start up the (really slow) standalone SDM application and select the components, which are not updated correctly, for undeployment and undeploy them manually.
    - After successful undeployment reimport the component/activity in the JDI transport studio again.
    As mentioned before, not elegant, but effective. It worked for all the situations now, when the deployment did not work, but there was no obvious reason available.
    Regards
    Karsten

  • Delta in source system doesn't work

    I've created delta-enabled generic datasource. The delta field is timestamp field. I've done Initial Delta run, posted couple new records with appropriate timestamps, tried to run delta but it doesn't work. Even on test delta run RSA3 in source system.
    Why?

    Hi  Gediminas,
    You need to maintain safety intervals(at least lower limit)
    Check: [How tou2026 Create Generic Delta|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
    Hope it Helps
    Srini

  • Sort Albums Doesn't Work

    I have a bunch of albums in iPhoto that I am trying to sort, and it just doesn't work.
    When I select them, right-click, and choose "Sort Albums" from the context menu, either *nothing* happens, or else the order of the albums is altered in some seemingly random way but the results are not alphabetical order.
    I don't see how the program could somehow not understand "alphabetical" so there must be something keeping it from actually doing the sort.  Anybody have any clues?

    When there is a selection, if "Sort Albums" will do nothing then the option should be greyed out.  Otherwise, it should sort those items which are selected.  Doing nothing and giving the user no feedback is not acceptible.
    You are right, that is confusing.  It is either a bug or a poor design.
    You may want to send feedback to Apple - use the form: Apple - Aperture - Feedback

  • The iPad's hardware system doesn't work.

    I have an iPad 2, which won in 2013 and today the hardware operating system this product is fail, as the screen freezes, it turns on and off alone, applications open and close alone. In 2014 and now the screen is just flashing with lime-green color, which does not allow display the menu or settings and neither Homepage and often shutting alone and can not reconnect the unit, by simply not ascend the operating system so effective.
    I took the product back to the company OMNI Computer Apple Support Brazil in Curitiba -PR, and this gave the report that my warranty is quenched to receive a new product and that I receive a new iPad 2 I should pay the amount of R$ 990.00. However , the problem that clomplaint is not collateral or other , but that the Apple operating system does not work.
    I contacted Apple support over the phone and was told that at the time he took to OMNI iPad, I still had 38 days of warranty.
    Besides Apple and OMNI violate the Code of Consumer Protection , targeted to abuse my rights , ratify the information cited , I have had to date many annoyances, such as stress, mornings and weekends lost without resolutions .
    Have I contacted the phone to Apple support again and many records there own links, ordered procedures to remedy this situation , the items were scored for solution : take the iPad for Assistance and restore it .
    I performed the two steps, but nothing concrete had company OMNI and Apple, nor a constructive feedfack and that could solve everything without the need for other means of resolving facts .
    Publish themselves.
    Grateful.

    Please just ask a question, we don't need a story about the history of the device.  Explain the symptoms and maybe someone can help.
    Based upon what I can understand from your post, try the standard troubleshooting...
    1. Remove apps from the Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    2. Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    4. Restore with your backup.
    5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it.  You may need to try DFU mode (Google for it).
    6. If still a problem, it's likely a hardware issue.

  • Can't open camera RAW image in CS4/Bridge with Win 8.1.  Worked fine with XP

    I upgraded from Win XP to 8.1 and got a new computer in the process.  I'm using CS4, and I think that works okay, except it does not recognize a RAW file.  Bridge won't open thumbnails for RAW files, and if I try to open one it doesn't open it in Bridge; it goes straight to CS4 and that says it's 'not the right kind of document'. It doesn't matter if the file is on the hard drive or on a Canon card in a reader. Bridge will display thumbnails for JPG files and open them in CS4.  It will not show the thumbnails for TIF files, but it will open them in CS4. How do I fix this?

    I did all that, in the order you recommended.  I downloaded, expanded and installed all three updates. I then checked the start page for CS4 and it is at 11.0.2. I also rebooted, but Bridge still won't display thumbnails of RAW files, will not open a RAW file in Bridge but sends it to CS4 which still says it is not the right kind of document.  If I try to open a RAW file in CS4 directly, I do get thumbnails, but it won't open the file.  On a more positive note, I called a friend who also has CS4 and who also recently bought a new computer.  However, his is a laptop with Win 8 Professional. He had not tried to use Photoshop since he got the new laptop, and he discovered that he had the very same problem. However, downloading the updates fixed him right up. My new machine is a desktop with Win 8.1.  What do I do now?

  • Sort Now doesn't work

    Hi.  I'm working in Numbers 3.2, and realized my Sort Now button is greyed out.  I can't access it, and can't sort anything.  I tried opening a new document and it's greyed out there as well.  Any ideas about how to fix it?  Thanks

    Hi ccwhiz,
    First, click on Add a Column...
    Now sorted by Column B (Count).
    Another way is use the contextual menu in any Column Label. Here sorting by Column B:
    Regards,
    Ian.

  • Audio/MIDI setup ok, but 5.1 system doesn't work afterwards!

    Hi I'm pretty hopeless, since I searched the whole web for a solution to my problem and haven't found a clue yet. I have a Creative 5.1 sound system and have connected it via an external sound card to my MacBook. I have been setting up the audio prefrences and configurated the speakers. The test went all fine! But when I put in a DVD or turn on iTunes, only my two front speakers will work! I have no optical output, so I can't really use a toslink cable (can't I?) I really need a good advice please!

    Here is the setup from my 27" iMac (10.6.8: to all intents and purposes identical for Lion):
    How does your setup look?

  • BC System doesn't work

    Hi,
    In the last 3-4 weeks I had a lots of problems when working on BC websites. Most of them are from Australia Data Center. The system loads very slow and some times it freezes showing the loading icon. This happens when I try to create/update pages,catalogs, menu items, forms... Some times I have the feeling that it block in some kind of loop - for example I try to create a catalog, I'm 100% sure that the url is unique, there is no other page with that url in the system and I get the error: "URL must be unique within the site..." . Then I go to view all Catalogs and this catalog for which I got the error it's there, it has been created.It looks that it tries to create the catalog again and again and again... I also get a System Message - Error occured, code 0...
    I don't know what is wrong, is it just me having these problems? I am very frustrated because I can't work, I can't do my job... it takes me a lot of time to do simple updates.
    Thanks!

    Agreeded!!  I am seeing lots of issues cropping up in the last 2 or 3 weeks that have never been an issue before.  And yes painfully slow in many areas. 

  • Re-replicate data source in QAS system doesn't work

    I've transported extract. structures from DEV ECC to QAS ECC and done data source replications on BI side.
    After that I done some changes (added several fields) on extraction structure CUSTOMER_ATTR on ECC side in dev env. and transported it to QAS ECC. Then I replicate CUSTOMER_ATTR on BI QAS nothing happens. It remains with the same field list.
    My QAS system is read-only. How can I re-replicate this CUSTOMER_ATTR to get new added fields?

    Gediminas 
    Datasource, extract structure and append structure(if any) not transported properly.
    Try to collect again and retransport and replicate.
    Check at RSA3 in QA system, now fields are visible or not.
    Srini

Maybe you are looking for