CS4 BRUSH REMOVAL

I upoload my brushes twice to photoshop and I want to delete them all at once is there a reset button? I am removing them one by one is there a quicker way?
Thanks ,
namaste'

And when one selects a Brushes Set from the pop-up-menu of the Brushes Panel is one not offered the option to either replace the currently loaded ones or append the selected ones?

Similar Messages

  • Problem with CS4 brush tool "paint inside mode"

    When I use the Flash CS4 brush tool in "Paint Inside" mode it erases part of the strokes around shapes. For rectangles it erases the stroke on the top and left hand side where the brush head crosses it, though it never seems to affect the other sides. The effect is less consistant with ovals, but it breaks the strokes at some points. I am using Flash CS4 version 10.0.2 on Windows XP, and I have checked for program updates through the Help menu. Here are two examples:
    If I understand right, the brush tool shouldn't be changing the stroke anywhere in this mode. I would be grateful for any help.

    This has existed for a very long time in Flash, at least back to version 8. I'm not too sure, but it certainly only affects two out of the four sides of a square. There is a bug on this, so I will send it back for review.

  • Is there a way in PP CS4 to remove the center of the image?

    Is there a way in PP CS4 to remove the center of the image?
    I've tried using crop and linear wipe effects but both of these effects take way from the outside of the image moving in. I'm trying to find a way to take away from inside of the image and move out. Basically making a window, if you will, to view the video layer underneath.
    Thanks for your help!

    Crop wasn't such a bad idea.
    Drop to be revealed clip in V1.
    Drop clip for the curtain effect in V2 and add crop.
    Set first keyframe at say 1 second for LEFT 50%, second keyframe at say 2 seconds to 100%
    Add the clip for the curtain effect again but on V3 (superimposded).
    Add crop.
    Now animate RIGHT: 1 second 50% at 2 seconds 100%.
    Done

  • Photoshop CS4 Brushes not Anti Aliasing properly

    I've just set up CS4 and my brushes are not anti aliasing properly. There are no soft edges on any of them. I'm able to get a pressure sensitive opacity change on the stroke but the edges are all pixelated.
    Here is an image (this is a soft brush. notice none of the feathering/anti aliasing is there):
    http://craji.com/images/adobeproblem.jpg
    I've updated the newest gpu drivers for my Nvidia 8800 GTS.
    I'm running XP SP3 with dual monitors. An Apple 30" and a Cintiq 21"
    I've tried placing the main photoshop window on both monitors (one at a time) to test if that was causing it and i've had no luck.
    All of the options in my GPU Enabled are currently unchecked (since they were giving me lag issues on my brush stroke when they were checked).
    Any help (even linking me to something similar in this forum) is greatly appreciated.
    Cheers-

    Definitely not file dependent. I'll open a photo in sRGB 8bit, or create a new document with any settings from cmyk/rgb/bw 8/16 etc.
    I'm wondering if it has something to do with my Nvidia Display Property utility. I use it to gamma up my secondary monitor (cintiq). Although disabling that utility didn't resolve it..
    I'll try uninstalling and reinstalling tonight if no one is having similar problems. Maybe that will fix it.

  • Photoshop CS4 brush lag with wacom tablet

    I've upgraded to photoshop CS4 extended recently and all my brushes that worked fine under CS3 are now with a real lag.
    I've installed the latest version of photoshop ( Adobe Photoshop CS4 11.0.1 update ) and the latest update for my wacom tablet, but the lag remains.
    My computer is a new "24 imac:
    -  2,66 GHz intel Core 2 duo processor
    -  4 GB memory
    -  NVIDIA GeForce 9400
    I use my tablet and photoshop a lot, but with this lag it's terrible to draw..
    Is there someone who can help me with this or has the same problems ?
    thanks in advance

    Glad I could be of service.
    Speaking of services, if you are running Vista or Windows 7 (not XP) you should turn off tablet services too. They automatically start if you install a Wacom driver on these Os'es, and they can also cause hiccups and lag in Photoshop CS4.
    You have to be logged in with admin privleges.
    Go to Control Panel->System and Security->Administrative Tools->Services
    Open 'Tablet PC Input Service'
    Stop the service and select 'Disabled' as the startup type.
    You'll know you got it because the annoying 'ripple' effect will go away when you touch the pen to the tablet, and the pop-up keyboard will go away. Of course, if you actually are running on a tablet PC then don't do this.

  • Photoshop CS4 brush cursor bug on Thinkpad T61p

    I've got a Thinkpad T61p with a Nvidia Quadro FX 570M onboard (driver version: 6.14.11.7471). There seems to be a bug with the graphics driver in conjunction with the new Adobe Photoshop CS4. Photoshop now uses GPU-optimization with more brush capabilities. Unfortunately the cursor clips when using brush-sizes larger than 64px. One can see the bug on the nvidia cs4 promotion "brush resizing" at http://www.nvidia.com/object/adobe_photoshop.html. Nvidia corrects this bug in newer driver versions, but lenovo only offers a WinXP-display-driver from 2008-04-28.
    Does anyone know any workround? I've tested somo older forceware drivers (178.24) with partial success. The display bug in Photoshop is fixed, but e.g. After Effects CS4 crashes while detecting the GPU.
    Message Edited by mikey on 10-23-2008 03:20 AM

    Today I've installed the latest Forceware Drivers 180.60 from http://www.laptopvideo2go.com/ to test the bug behaviour.
    The brush cursor now seems to be able to handle big brush sizes but the performance is reduced noticable.When painting inside a new document the rendering of the brush path is done after painting over the area, even when using small brush sizes.
    So let's wait until Nvidia/Lenovo roll out a new driver.
    Message Edited by mikey on 11-24-2008 07:57 AM

  • CS4 Brushes Not Pressure Sensitive with OpenGL Drawing Enabled

    Hi,
    Four days into my CS4 experience. Not awful, but not good either.
    Running on Vista Business 32bit, Phenom 9550 Quad Core, 4GB RAM, Nvidia 7600 GT.
    I just tried my WACOM tablet and the brushes were very slow, missing the start of some strokes and most importantly no pressure sensitivity. I did
    a little searching and someone suggested switching off OpenGL and this has
    fixed my problem.
    Does anyone else have a similar experience ?
    Also, is my 7600 GT card not powerful enough ? When I moved to CS2 from 7,
    I had to upgrade my graphics card - which was running just fine with 7.
    Thanks in advance,
    Shahzad

    Hi,
    Thanks for the tip.
    As it happens, I also updated both my Wacom and Nvidia drivers
    and when I switched OpenGL back on, things were fine. The pressure
    sensitivity was back and the lag was gone.
    I'll also try playing around with the settings as you suggest.
    Shahzad

  • CS4 Brushes don't seem to work with Wacom Mouse

    Ok, so since I've upgraded to CS4 about 3 months ago my Wacom Mouse (Intuos 3) doesn't seem to do anything with any brush tool. My attempts at brushing or stamping show in the history, but nothing changes to my document. I'm hoping this is a simple check box I'm missing or something of that nature.
    Before someone asks...
    -I am in normal masking mode.
    -I am brushing/clone stamping on the layer I want to be on with 'Current Layer' selected.
    -I am in the RGB Channel.
    -My opacity and flow are set to 100%.
    -Brush tools work just fine with the Pen.
    -I've actually replaced my mouse for a new one, same issue.
    Any help would certainly be appreciated. Thanks much!

    Check out the brush engine; specifically the shape dynamics with pen pressure selected. If the minimum diameter setting is a 0% then although the pen works with this, the mouse doesn't.
    Anthony.

  • CS4 brush tool is a few pixels off

    Hello. In CS3 when I used the brush tool to clean up masks, I could put the edge of the round cursor on the edge of the subject at hand, and when I clicked the mouse, the brush would land right where I placed the cursor. Now, in CS4, the brush mark ends up like 5 pixels away and to the bottom of the cursor. So, it is extremely hard to be accurate. Sometimes, if I delete my preferences, it works fine, but at some point, it starts doing that again.
    Any insight would be appreciated. I am running photoshop on a new Mac Pro tower, 4 core.
    Thanks!

    you created a new document in full screen mode use the F key to cycle through the screen modes and everything will be back to normal.

  • CS4 brush cursor faulty

    I recently installed Photoshop CS4 and find the brush cursor faulty. Only a portion of the cursor shows up. With a small brush most of the cursor shows. With a large brush only a small segment in the upper left shows. Anybody else have this problem? Anybody have a solution?

    Just a tip Ron. That fault has been reported in several threads, all recent. So it always pays to scan other messages or try a forum search first. You may get your answer quicker and it will certainly put your situation in better perspective.

  • CS4 Brush cursor acting strange over 80px diameter

    Has anyone came across this problem? When the diameter of my brush (and doesn`t matter if it is regular brush or clone brush) goes over 80 px, the cursor is no longer a circle, but it starts to "cut off" - and the more I increase the diameter, the less of the cursour I can see. In the end, over 500 px diameter, I can't see the cursor at all anymore. I find it very annoying, so any idea what to do about it?
    Using PS CS4 11.0.1 on Windows XP SP3

    Since you already have updated to 11.0.1 that only leaves your video card or its drivers as likely candidates for causing the fault.
    Is the card on the tested list? Does it support OpenGL to the extent needed by Photoshop? Have you updated the drivers?

  • CS4 brush and stroke plugin

    I'm interested in the CS5 bristle brush and beautiful stroke feature but I'm not willing to shell out the $$$ to upgrayyd to CS5 simply because of this. Is there any free plugin/way to add them to CS4?
    Thanks

    Sorry, but not everybody is rich enough to put no effort into looking for free (cash wise) solutions when they possibly may exist especially since I hear crazy rumors that some people actually make software mods for free. As to why I don't want to upgrade, would you automatically go buy a $5000 computer when you could possibly get one good enough or as good for free/lower cost? Anyway I thought I read about plugins that add new brush strokes so I was looking for CS5 like recommendations but I guess maybe they don't exist.

  • Cs4 brush lag - problem solved

    I downloaded the evaluation version of Photoshop CS4. Like many others, I found it unusable. The main problem was an enormous lag in using the brush: when painting, I had to wait for several seconds to see the result.
    I tried all suggestions: update drivers for graphics adapter, update DirectX, hacking the registry, deactivating antivirus software.... No matter what I did, with or without OpenGl drawing activated: the brush was terribly slow, unusable really...
    So I gave up and went back to CS3: works like a charm, no problem. A shame though, and regretting some nice CS4 features.
    Wanted to give it 1 more try, and this time looked at some BIOS stuff. Tried a few things with no luck UNTIL ..... enabling palette snooping. That did it: CS4 flies, no more lag..... feels even a bit faster than CS3.
    Asus M2V motherboard with Athlon 64 X2 3800 and AMI BIOS, NVIDIA GeForce 7600GT graphics adapter, Windows XP pro with SP3, 2 GB of RAM
    Hope this will help others !
    Happy New Year, Gelukkig Nieuwjaar, Bonne Année,
    Rudolph Wijburg (Dutch, living in France)

    I Feel everyones pain!!!!
    After using Photoshop CS4 since it's release with virtually no issues and really enjoying the new features I started Photoshop this morning and experienced all of the issues in this thread!
    Extremely slow and lagging brushes.
    Jittery Zoom tool operation.
    Text - very slow! I could type a 5 letter word and sit back in my chair and wait for it to catch up!
    etc. etc.
    If this would have been like this when I installed I would have immediately reverted back to CS3, completely unacceptable!
    Turns out Microsoft update installed a new set of NVIDIA drivers!
    I went to the NVIDIA site and downloaded the latest drivers, installed them and now everything is good again.
    Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2400 MHz)
    Operating System: Windows Vista (TM) Ultimate, 32-bit (Service Pack 1)
    DirectX version: 10.0
    GPU processor: GeForce 8500 GT
    Driver version: 181.22
    Total available graphics memory: 1790 MB
    Dedicated video memory: 512 MB
    System video memory: 0 MB
    Shared system memory: 1278 MB
    Video BIOS version: 60.86.48.00.16

  • CS4 Brush Tools

    I have just loaded photoshop CS4 as part of the master collection. When I use any of the brush, dodge, burn or other similar tools the brush starts to disappear as I enlarge it eventually disappearing. Even though this happens the tool still works even though most of the circle around the brush area is missing. Any tips on how I can stop this from happening.

    Reported in another thread.
    I think the fix was to update the video card drivers.

  • Adjusting pixels in PhotoShop CS4 and removing 'rough edges'

    PhotoShop CS4
    WinVista Ultimate
    Need: 1) File #1 - I need to adjust the pixels on an *.eps file to a maximum of 600 pixels. The entire drawing is a single layer to my knowledge.
              2) File #2: - I also need to adjust the rough edges of a 'cloud' that surrounds some text.  Also, *.eps.  The 'cloud' is separate from the text.  If I remember correctly, I need to 'fill in' the 'cloud'.
    Both file sizes are <1MB.
    Eventually, I'd like to combine File #1 with File #2.
    File #1 and #2: Status: Currently, I have some *.jpg and *.eps files that need adjustments that were created 2+ years ago.  Being new to PS CS4, some guidance would be appreciated.
    TIA!

    I to have the same issue and it all started after switching photoshop cc's layout to 3d mode now everything crashes repeatedly... Thankgod AE still works but yeah ps 3d system is the culprate here b/c It worked perfectly for 4 months for me until i tried there crappy ps 3d system!

Maybe you are looking for

  • Can no longer connect to Wi-Fi

    A repair was done on my ADSL network at my local exchange 2 days ago. Since then, I cannot connect to my wireless network. iPod says: "The error was "Operation could not be completed: Invalid argument". Other devices (cell phone) can connect fine. Im

  • Connecting the iPod Hi Fi to Airport Express / AirTunes

    i've got everything set up correctly and it used to work before i moved. however, there is a slight difference in the set up now, perhaps this is why it now won't work. i ONLY have a laptop that is connecting wirelessly to the (wireless) network. the

  • Importing a complete library into iTunes at the same time.

    I recently purchased my first Mac and have copied all of my files from my laptop to the iMac, this includes my iTunes library. My question is how do I then import the songs into iTunes and not have to do it one song at a time...as I have hundreds of

  • Device on solaris 10 X86

    Hello I've seen that there are new devices for disks c0t0d0s10 c0t0d0s11 c0t0d0s15 Could you tell me how to describe them into the VtTOC Thanks Patrick

  • MIDI device to start / stop playback ?

    Hi again, 2nd post We're using GB as our sound processor for keyboard parts in our "band". Now, since I suck at singing and playing keyboards at the same time, I'd like to pre-program synth tracks, and have the ability to start and stop the tracks us