CS4 bug: Rectangle Marque Tool unwanted off-set

I feel like there are a lot of annoying bugs in CS4. The latest and greatest bug is with the Rectangle Marquee Tool (Selection Tool). When the tool is selected from the tool bar I get the cross-hairs/bar cursor icon, which is totally fine... instead of drawing the axis point from the very center of the cursor, it's off-set to the bottom of the cursor icon. In other words, It will always be 10-20 px off from where I actually want to make my selection...
May not be a big deal to most people, but when you're trying to select small pieces and move them, this should be accurate.
I dump my preference files, toggle workspaces. It's a temporary fix, is anyone else noticing this?

Yep, Ann has the band-aid solution. Unfortunately, it won't cure the disease but it does work to quickly get rid of the symptom.
You might also see this annoying behavior with other tools like offset brush cursors and the path tool. Same (temporary) fix - hit F a couple of times.
-phil

Similar Messages

Rectangler marquee tool seems to be feathering my selection ?

Hi everybody
I have selected some content, that is 100% solid colour and no Alpha, in my image with Rectangler Marquee Tool (with feather set to 0px). I want open this content in a new window so i ctrl-c or ctrl-shift-c, then make new document ctrl-n and paste it in. When I zoom in, 1 pixel on the left and right sides are partially transparent.
I'd very much appreciate some clarity on this as it has brought my web-design to a halt
Regards
Thomas

Uncheck the Anti-Aliasing setting. This setting helps reduce jagged edges, but essentially feathers the selection at the edges.
-Noel

Indesign CC crashes when I select the rectangle frame tool?? Its a custom page, tabloid with guides set.

My indesign crashes when I select the rectangle frame tool. Does it matter if its a custom doc set as a tabloid and guide lines? I have a project due and all I'm trying to do is add a picture I took.

See Replace Your Preferences

How do you turn off 'perspective' in rectangle grid tool?

How do you turn off 'perspective' in rectangle grid tool? - Asked by Kenjo!

Can you show a screenshot?
Either it's the perspective grid or just the options (double click the tool)

Is it possible to move some tools or their setting parameter from Configuration interface to Inspection Interface?

Hi
We use Vision Builder for machine vision. There are two interfaces in Vision Builder (Inspection Interface & Configuration interface). It is better machine vision operator would work with Inspection Interface and he should not access to all of setting and tools but he need to redefine some parameter like RIO in some tools like measuring tools for different products.
Is it possible to move some tools or their setting parameter from Configuration interface to Inspection Interface?
Or is it possible to define security like password to some tools and their setting but not all of them?
Thanks
Refa

Vision Builder generally isn't supposed to rely on user input, but there is a step called "User Input" that allows you to get input from the user. ROI would be tricky. I think the slickest way to do that would be to create a VI that displays the image, lets the user drag a rectangle, then pass those coordinates back to Vision Builder to configure the ROI.
Tanner B.
Applications Engineer
National Instruments

Rectangle marquee tool is rounding at the edges, how to I revert to sharp edges?

The rectangle marquee tool is rounding at the edges of my selections and when I try to fill with solid color, it fills very transparently and almost water-color like.
I don't know how the settings were changed, but I need help reverting them back to normal.
FYI: When I select an area using the rectangle marquee tool, an error message pops up that says "Warning: No pixels are more than 50% selected. The selection edges will not be visible."
I am not very savvy with this program, but need to finish creating a flyer by this afternoon. Please help!

Hi,
You probably have a feather value other than zero set in the tool options bar.

Hello , I have installed adobe illustrator CS5 and when i open it..tool bar isnt working.. when i click at rectangle/pen tool the sub options on it dont appear though black sign comes.. am confused wat to do?? i have windows 8 as OS.. please help soonest.

Hello ,
I have installed adobe illustrator CS5 and when i open it..tool bar isnt working.. when i click at rectangle/pen tool the sub options on it dont appear though black sign comes.. am confused wat to do?? i have windows 8 as OS.. please help soonest.....thankyou

charmi,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Bug in Crop tool with Olympus E-M5 raw files (ORF)

There is a bug in the crop tool with Olympus OM-D E-M5 RAW files (ORF) that is still not fixed with the recent update. Here is how to reproduce the problem.
I setup my E-M5 camera picture aspect ratio to 3:2 (instead of the sensor 4:3) and file format to RAW.
I take a picture.
I import the picture in Lightroom. The first thumbnail I see is the full sensor, then Lightroom computes a new thumbnail and correctly display the 3:2 crop factor.
I select the picture in the library and press [R] to bring the Crop tool.
BUG: The Crop tool does not let me recover the full 4:3 sensor image and is locked to the 3:2 crop factor.
Can this be fixed? Thanks

Are you sure you mean Photoshop version 6 the is a very old version of Photoshop before ACR existed. ACR first became available as a extra cost plug-in for Photoshop version 7. ACR started to be shipped with Photoshop with Photoshop CS. Each version since Photoshop CS has a newer version of ACR which is not compatible with older versions of Photoshop. So
CS ACR version is 2.4
CS2 ACR version 3.7
CS3 ACR version 4.6
CS4 ACR version 5.7
CS5 ACR version 6.7
CS6 and CC ACR version 8.4 however the new features in ACR 8.4 for CC are crippled in CS6. CS6 just get the new Camera support.
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
If you have CS6 use menu help>Updates it should find the ACR 8.4 for CS6 and update your installation. If it does not you can down load it and the DNG converter. However don't convert to DNG just use your OFR RAW files.
http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html
If you do mean Photoshop version 6 you need to see if Olympus has a RAW converter for Photoshop version 6 for your camera.

Wont let me "drag" the rectangle marquee tool or text box tool.

Hey photoshop wizards... I need your help. I have CS4 and when I use the rectangle marquee tool or text tool... it wont let me click and drag an area that I want. It automatically selects a box from the top left corner of my image to where I clicked. It also does not let me move the box with the move tool once its made. Ive reset all the tools and this has not helped. If you know what Im talking about... please help me as it is preventing me from continuing my work. Thank you.

You don't say what OS.
First thing I do when things get goofy is to trash the prefs. This is covered in the FAQs if you don't know how.

My rectangle marquee tool won't draw 90 degree corners...it defaults to a round corner.

My rectangle marquee tool has stopped drawing right angle corners. When I use the tool and mark the area, as long as I hold the mouse down I have right angles, As soon as I release the mouse the corners become rounded. It must be a simple toggle, but I can't find it,
Message was edited by: richduby

Hi there
Make sure the feather value in the Rectangular Marquee options bar is set to 0 px, as shown below:
If this does not solve your issue, feel free to post here again.
Cheers!
Kendall

Has there been an update or fix to the digital signature time zone off set being one hour off?

Has there been an update or fix to the digital signature time zone off set being one hour off? I have seen that in the forum that this was identified as a bug back in June 2012. Any updates on this as it is still occurring in my version of Acrobat X with all updates applied. Thanks.

Windows 7
Sent from my BlackBerry 10 smartphone.

Boot camp no longer on startup disk bless tool unable to set boot disk

iOS 10.6.8 boot camp no longer on startup disk msg says 'bless tool unable to set boot disk'

solved my own problem. a simple restart did the trick.

Effect of a mask is off-set from the mask itself. Help ...

I have a corner-pinned layer (it's a screen replacement) that a character passes in front of. I need to animate a mask so the character can pass the screen, but the effect of the mask is off-set from the mask line. It's really annoying.
It seems like the mask is set to the original layer size ... but I have to corner-pin the layer so it fits the screen I'm replacing, which makes the visible part of the layer smaller. Is there a way to make the mask perform in an "aboslute" way?
Pic attached to show how the mask is behaving ...

For anyone who's curious, this didn't really solve the problem, but it was a satisfactory work-around:
I went ahead and exported the corner-pinned, UNmasked screen replacement on its own, sitting on a transparent alpha channel. I then brought that new video layer into my composition and masked it. Since the new layer wasn't being corner pinned, the mask halted perfectly right on the visible masking line.

Calculating prior months using off-set and crossing to prev year

Gurus,
I am getting current month period based on user entered value and calculating prior month by off-setting current month by 1.
it works fine when current month value is greater than 1. If it is 1, prior month does get evaluated as 12 of previous year.
Example...
If Current period is - Feb, 2008 (02/2008). previous period comes fine as Jan, 2008.
If current period is Jan, 2008 (01/2008) perious period is unknown. (I want it to be 12/2007).
is there way to handle this without too much coding etc?
Regards,
-SM

Mayank,
What is SAP variable for Fical Year/Period, which will have both month and year value? (I guess I need to Fiscal posting period rather than Cal month?)
Also what is SAP variable for Quarter/Year? I need to off-set of quarter also.
Thanks, -SM

Off set gl account needed in fbl3n

Dear experts,
My client want view the off set gl account in fbl3n screen.is it posible? If it is posible help me.
ex: expenses a/c Dr
to cash a/c
The requirement is while checking the expences gl in FBL3N
cash a/c no also should be appeared.this is what client requirement.so plz help me.
Thanks in advance
Regards
srinivas

Dear friends,
Thanks for your reply.But i dont have access to OSS.so plz send me the procedure to get that field in FBL3N screen.If you send the procedure that is very helpful to me.
Thank in advance,
Regards
srinivas

CS4 bug: Rectangle Marque Tool unwanted off-set

Similar Messages

Maybe you are looking for