CS4 Buttons - need help
I have a question....I saw on a website once (I wish I could
remember which site it was), flash buttons that were creatively
animated.
The button would appear just as text, but when you hovered
over it, an image would rise from behind it, then, when you moused
off, the image would go back down.
It did this for each of the buttons and I cannot figure out
how to get that to work, especially since in CS4 with AS3 you
cannot use AS on a button.
It's also really difficult to add a motion preset to a
button....can anyone help?
I've looked for tutorials on how to add a motion
script/preset to a button however, I'm not finding anything at all.
Am I making this more complicated than it needs to be?
Should I put the button inside a movie clip and animate it
that way? I'm not sure if that will work since I am trying to make
an image appear behind the button when it's in it's OVER state.
Is there an easier way for me to do this?
Thanks.
Whatever you do will require a movieclip playing a role
somewhere along the line. For the scenario you described where the
image slides out and back in, it is more likely entirely a
movieclip.
What you want to do is create a movieclip that has mouse
event listeners that cause it to go to different frames for the
different states of the 'button'. So in frame 1 you would have the
'button' in its normal state, and a rollover could send it to frame
2 where you have an animation movieclip play. Then, when you roll
out you send it to another frame containing the reverse animation
which sends it back to frame 1 as its last action.
I thought I best add that the 'button' is the movieclip
itself, there is no real button involved.
Similar Messages
-
I have a big problem at the installation of after effects CS4 ! NEED HELP
HEY all i need help I want to install AFTER EFFECT cs4 and i do all AV hijack and usb fix scan nothing fond >>NEED HELP
ERROR CODE:
Adobe Dynamiclink Support
Erreur:
Error 2.
Adobe Dynamiclink Support
Erreur:
Error 1605. Cette action n’est valide que pour les produits actuellement installés.
THANKSI know the problem is i have an old AE cs4 and i don t uninstall correctly but i have another problem with twixtor effect i register my twixtor but i have the orange CROSS on my video --' and THIRD PARTY installer won't install my new effect "say uninstall and install correctly with serial number ..."
i have CORE2 DUO E6320 GTS8600XFX 2GO RAM DDR2 ASUS MOTHERBOARD (bad) WINDOWS 7 32BIT ULTIMATE for the DYNAMIC links probleme i use ccleaner REGEDIT and cs4 cleaner tools . -
*Flash CS4* I need help...
OK, so...I tried to download a trial of Flash CS4 on my parent's laptop. I got as far as saving the AkamaiDownloadManagerInstaller to the computer's desktop, but when I click on the link (or whatever) it says "a program needs your permission to continue." I clicked "Continue," and it shows a loading bar for just a split second, but then goes away. Uh...I don't know much about computers, so please try to use *small words* when telling me what to do. My parents have a Toshiba Windows 7 (I think) Laptop.
Thanks for your help
Mr. Snickersi recently downloaded trails of flash cs4 and web premium package cs4 (took a day to download at high speed starbuck's internet). couldnt get the setup.exe to work or the uninstaller to work. surfing tech support over next couple weeks to try various agents was useless and expensive until i finally reached someone with useful info. all the agents had foriegn accents and read from scripts and web support pages until yesterday, when i reached a guy who told me two things i'll report to various forums addressing this same issue:
1. download windows uninstaller program from their website (google: windows ininstaller). this program is different from the one that doesnt work in the programs and features area of control panel when you try to uninstall adobe products from there.
2. windows explorer 8, the newest version, DOES NOT download adobe softare properly and leaves things out, causing all sorts of issues including the setup.exe program not working. download firefox browser from mozella (google: firefox) and use it for all adobe downloads. apparently the old windows explorer 7 will work, but if you already have explorer 8 installed its easiest to just use firefox.
i'm spending the next couple days downloading the 4.14 G web premium trail with firefox and will report if this works. -
Create a back button - need help
Hello JHS Team,
I am using JHeadStart 10.1.2.
I need to create a back button in a specific UIX page on my application.
I'm new to JHeadstart and I really need some help from you. Can anyone help me???
ThanksAtena,
You can add the button to your page post-generation, using the UIX Visual editor. Make sure you uncheck the Generate Pages switch for this group in your application structure file to protect your change upon regeneration.
May be an unsollicited advice:
I understand that you are new to ADF, JDeveloper and UIX. UIX is superseded by ADF Faces in JDeveloper 10.1.3, and based on the JSF standard.
UIX will not be further developed, JSF and ADF Faces are the technologies to use going forward. Therefore, I would recommend to consider to switch for your application development to JDeveloper and JHeadstart 10.1.3. For JDeveloper/ADF 10.1.3, there is an excellent developers guide available, that provides a lot of useful information, in particular when you are new to the ADF Framework.
Note that a JHeadstart 10.1.2 UIX generated application can easily be migrated to 10.1.3, you will only need to redo your post-generayion changes. So may be you can try to stick (close) to 100% generation for now, and migrate to 10.1.3 at your earliest convenience.
Steven Davelaar,
JHeadstart Team. -
Hi,
How can I create radio buttons in JHeadstart 10.1.2.0??? Can anyone point me some examples or tutorials?
Can anyone help me on this??? This is very important!
Thanks,
AtenaAtena,
Please use the 10.1.2.2 release. Since that release supports radiogroups out-of-the-box.
In monitoring this forum we have to set priorities. This means that if a feature is addressed in a higher version we will advise people to upgrade to this version rather then describe how to add this feature in a previous point release. More so because the upgrade to 10.1.2.2. is very easy.
I hope you understand our position.
Regards,
Ton van Kooten
Oracle JHeadstart Team -
IDVD quits after clicking Burn button, need help.
After clicking burn button on iDVD, the software quits.
The message appears:
The application iDVD quit unexpectedly.
Mac OS X and other application are not affected.
Click Reopen to open the application again. Click Report to see more details or send a report to Apple.
part of the report:
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: iDVD
Path: /Applications/iDVD.app/Contents/MacOS/iDVD
Parent: WindowServer [94]
Version: 5.0.1 (626)
Build Version: 26
Project Name: iDVD
Source Version: 6260000
PID: 417
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000I SEND MY THANKS TO LATVIA. YOUR REPLY SOLVED MY PROBLEM OF UNEXPECTED QUITS AFTER SEVERAL HOURS OF "HELP SEARCHING" ON THE INTERNET.
SO MY ADVICE TO MAC USERS FROM OTHER COUNTRIES THAN ENGLISH AND COUPLE MORE SUPPORTED LANGUAGES: CHECK FIRST YOUR INTERNATIONAL SETTINGS -
Can't add action script to my buttons, need help
I'm trying to add action script to my buttons to link them but the script menu has the message "Current selection cannot have actions applied to it" Why is this happening?
see attachedOkay,
I have a page where I have a button that states "PRODUCTS". I need to get
the button to send the user to another page called "products.swf
(products.fla)". What script to I insert in the actions menu?
Thanks
Derrick Young - Graphic Designer, Art Dept.
(d) 403.250.4261 | (f) 403.250.4336 | www.calgarysun.com
(e) [email protected] | (a) 2615 12th Street N.E., Calgary, AB
T2E 7W9 -
Photoshop CS4 crashing -- need help
I have recently installed PSCS4 and have just started using it. I am having trouble with the program crashing under Windows XP (SP3) on a 3.2 GHz, P4 single core machine e/w 2G RAM. I get the following error message:
"The instruction at "0x262740db" referenced memory at 0xffce8b95". The memory could not be "read".
Click on "OK" to terminate the program
Click on CANCEL to debug the program
CS3, Lightroom and everything else runs fine.
Any ideas?
Thanks in advanceGraphic cards die in a blaze a glory, and do not pop a GPF msgbox.
This is either a programming error (a memory address way up at the end of the address space is not for mere appls) that surfaced, or memory failed (i.e., the address reached should have been some other address, but when the memory was read for the address, the wrong address/data was provided). It could also just be cosmic rays, man, like, that'll do it every time if you don't have foil around your machine, man. I know these things, I am, after all
Expert Here -
I put a box, which will be a frame around illustrations, in the master of this small book so that each illustration will be framed. The frame is colored. It looks great on the .indd file, but on the PDF, the frame is gone. I did it again, this time making the frame bigger (1 pt instead of .5 pt), and 100% color instead of 50%. Still didn't show. What's wrong? Of course I'm noticing this when I'm under a deadline and the printer is waiting. Yikes.
Thanks.Richard: the master where I created the box doesn't have any other layers. But you gave me an idea. I made a bigger box on the master and by golly, there the box was on the PDF. I guess the illustrations on the book pages were covering the box, which was really only on the master. The bigger box looks OK, although I'd like it smaller; it'll work. Thanks!
-
Need help with Flash CS4 buttons/can't get buttons to control anything
Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
> -
Need help in screen capturing for flash CS4 AS3
Hi, i need help!!!!!!!!!!!!!!!!!!!!!! URGENT!
I am currently doing Augmented Reality.
I got my marker to detect my model but my problem now is how to screen capture the content that is in swf.
(As in capture the dae model shown in the comp not from webcam.)
& also i just want to capture the swf window not the whole desktop.
I read online, they say its impossible?
Or is it possible to call screen capture function in javascript to flash CS4? (LIke external data)
(Moreover, does anyone know how to detect multiple dae models with different markers?)
Anyone can help??? Thanks in adv!!My current program (Flash CS4, AS3) only can capture what the webcam sees.
How do i change it to screen capture (something like print screen) with my .DAE models?
In the case, when i click on the capture button, it print screen.
Here's part of the code that capture what the webcam sees.
private function captureImage(e:MouseEvent):void
bmd.draw(stage);
bmp = new Bitmap(bmd);
bmp.x = 140;
bmp.y = 40;
addChild(bmp);
capture.visible = false;
saveButton.visible = true;
discardButton.visible = true;
Really really need help! URGENT!
Thanks! -
I am usung the Captivate reviewer to distribute draft modules.
The problem I am havving is the .LOCK file - when someone goes to review the module, they have to specify the location of a temp file. (the .lock file). When they have finished that module, then they have to either specify a new location for the next module, ot manually delete the lock file.
Is there a way to disable the comments logging feature, or have the lock file automatically deleted?
Thanks
TerryThank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
> -
Need help.. premiere pro cs4 imports video but not the audio!!
i need help before i fkn suicide..
i'm trying to import a .mpg clip its importing it but with out the audio.
the file is fine when i play it in VLC or WMP
i've also imported it before and it imported fine.. video and audio but now i dunno what the fk is goin on!?!?!?!?
i've tried uninstalling cs4 then reinstalling etc... i've tried the 4.0.1 update etc... i've opened it up in another program then changed it into .avi and still nothing!!!!
it must be something i'm overlooking in settings
HEEEEEEEEEEEELP!!!!try doing a little research on the hundreds of posts exactly like yours.
Its called the ac3dc3dbs2t32cfgh24.dll codec or something, its in encore and you copy it into premiere. I dont know, ask someone who does. -
I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you
Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige -
Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks
You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.
Maybe you are looking for
-
During 98% of the installation, it prompted the following message "the procedure entry point GetProcessImageFileNameW could not be located in the dynamic link linrary PSAPI.dll" I am on window XP and Explorer 7. Does it matter to ignore the message a
-
ITunes wont put any songs on my iPod
I recently tried to move my iTunes onto an external hard-drive, with much difficulty. Once I was done I added a few songs from the iTune store. However, when I went to sync my iPod I got this message, "Some of the items on iTunes, including 'One', ca
-
How Do I Create This Basic Geometric Shape?
I want to create a geometrically precise raindrop shape, 1 inch wide and 1.5 inches tall. I start with a 1-inch circle as the base, then I move the top anchor 0.5 inches higher. I then use the Convert Anchor Point tool to turn the top anchor from a c
-
hi when i am debugging method i got this what is the meaning of this
-
How do i import my actions from photoshop cc to phhotoshop cc 14?
?