[CS4] can I make a 'template' htm page with snippets?

I know about DW templates (well, more or less) and I know
about the
choice you get in Preferences to have your new htm(l) page in
DW come
up with the (x)html(strict or not so strict) doc type etc.
What I would like is:
I start a new page in DW(10?) from a praticular site defined
in DW and
lo and behold: my head is the way I want it, certain snippets
are
included et cetera.
Am I dreaming or is this possible?
Groet,
Adriana

> For any given site you might have multiple templates
I think this approach is counter-productive. If you need more
than one or
two templates for your site, then I believe you have not
selected the
optimal method for your templates. And more than about 50-60
pages
dependent on a single template is going to quickly become a
pain IF YOU HAVE
ONLY USED TEMPLATES.
I use the following scheme....
First, I mentally separate the page layout into three
sections:
1. Stuff that will not change for the life of the site (i.e.,
the basic
structural elements)
2. Stuff that *could* change from time to time (e.g.,
navigation elements,
burst advertisements, section-specific navigation, etc.)
3. Stuff that *will* change from one page to the next
Then I create a template containing all class1 elements. Next
I create
server-side include files containing all class 2 elements and
place them on
the template as needed. Note - some of the class 2 elements
may be
"section-specific elements", and their placement on the
template will be
subject to the next item. Finally, I insert editable regions
to cover the
class 3 items, INCLUDING the section-specific navigation.
This allows me to just cookie-cut the rest of the site. I
estimate that
even for fairly large sites, about 80% of my work goes into
planning and
creating this template file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"tweaked_eye" <[email protected]> wrote in message
news:[email protected]...
> What you might be missing is that you create your
template and then create
> editable regions on the template. For any given site you
might have
> multiple templates that reference different style
sheets....Most important
> to my workflow is the stylesheet replication and the
master navigation. I
> can have a site with 100's of pages but if the
navigation changes I can
> update the various templates and it will update the
related pages. That
> was the intent of the template system.
>
> "A.Translator" <[email protected]>
wrote in message
> news:[email protected]...
>>>> The other thing I would love, this
"template" being linked to a
>>>> site so
>>>> every new page started from within this site
would have the data
>>>> already in it, cannot be achieved by using a
classic DW template, I
>>>> believe.
>>
>>> Sure it can - why not?
>>
>> I better go back to the manual!
>>
>> --
>> Groet,
>> Adriana
>>
>>
>
>

Similar Messages

  • Can I make my template more beutiful with Adobe Photoshop

    I have a website http://www.blogseoads.com I want to make the template more beautiful with Adobe Photoshop. Is their any way to make my template beautiful with Adobe photoshop or Adobe Flash. Share your suggestions here.

    Indeed photoshop is the best option if you need to choose between photoshop and flash.
    But if you want to make the site less static you can always make animations in flash .

  • Can not build a template based page with customized page type.

    I built a customized page type (with persepective attribute) and wanted to build pages with this type. If the new pages do not based on any template, it works fine. However, if I wanted to use a template, the page type was set back to "standard"!
    Steps to reproduce it:
    1. create a new page type - test page type.
    2. create a new template = test template.
    3. create a new page - test page.
    3.1 choose the page type to be "test page type"
    3.2 fill in the form including the new attribute info.
    3.2 choose the page template to be 'test template"
    3.3 click finish
    4. click the properties of "test page", it shows that the page type is "standard" and the new attribute information is gone!
    If in step 3.2, no template is chosen, the properties of the new page shows the page type is "test page type".
    I tried to find a workaround.
    1. create a page with "test page type".
    2. covert the new page to template.
    I got this error message:
    Error while copying page. (WWC-44262)
    (WWC-00000)
    Looks like customized page type and template can not coexist. Is this a bug?

    How long should the upgrade take? And should it be attempted on a production (infrastructure on machine 1/middle-tier on machine 2) Windows 2000 architecture? Or should be wait for 9.0.4? Or ... should I ask this in a TAR? Thanks!
    Mike

  • Can i create a template in pages with IOS?

    How do I create a template in Pages from my iPhone 6? Thank you.

    Hello BoGodbold,
    Thanks for using Apple Support Communities.
    You will need to create a Numbers template on your Mac, and then transfer it to your iPad.
    You can create your own custom templates in Numbers for Mac and use them in Numbers on your iOS device. To install a custom template on your iOS device, first save your template to iCloud, iTunes, or a WebDAV server, or send it as an email attachment.
    Add custom templates
    http://help.apple.com/numbers/ipad/2.2/#/tan57e4f9f9c
    Take care,
    Alex H.

  • How can I delete a template in Pages?

    How can I delete a template in Pages?

    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=215&mforum=iworktips ntrick
    Peter

  • Can you make address labels in Pages?

    Can you make address labels in Pages?

    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=182&highlight=labels &mforum=iworktipsntrick
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
    Peter

  • Can I make a document in pages on my iMac and then export it too pages on my Ipan?

    Can I make a document in pages on my Imac and then export it too my Ipad in pages?

    Welcome to the Apple community.
    Sure you can, just create the document in pages as you always do on your Mac, once it is complete, drag it to the Pages section at iCloud.com on your web browser. It will then sync to and be available in the list of documents when you open pages on your iPad.

  • How can I make photos on web page enlarge with mouse-over?

    How can I make photos on web page enlarge with mouse-over?

    There's a couple of recent topics which mention MagicZoom and JQZoom...
    https://discussions.apple.com/message/17438064#17438064
    https://discussions.apple.com/message/17440847#17440847
    A very simple method is shown here...
    https://discussions.apple.com/message/17440847#17440847

  • Scrolling sidebar- can I make a template out of this?

    scrolling sidebar- can I make a template out of this?

    That's not possible (although a good idea). You can copy/paste a sidebar widget, though. So, create your base widget which will serve as your template, and then you can copy/paste it when needed throughout your iBook.

  • HT202879 How can I make labels 30 per page?

    How can I make labels 30 per page?

    Using what application on what Mac running what version of OS X?

  • How can i make a coppy both side with my hp 6500a plus all in one?

    how can i make a both sides coppy with my hp 6500A plus all-in-one?

    For windows:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02773085&cc=us&dlc=en&lc=en&product=4083977&tmp...
    For MAC:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01935823&cc=us&dlc=en&lc=en&product=4083977&tmp...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • How can I make more than one account with chat on clubwpt?

    I can't make more than one account with chat on clubwpt? i know several players that has made as many as 20 accounts with chat.I can make accounts but clubwpt will not give me chat,they must have my IP address ,because their response is " you r allowed one account with chat only." But as I have said several players have several accounts with chat. Can anyone help me? Are there any programs or plugins that can do this?Any help at all will be greatly appreciate.

    Open another iCloud account for the other user.

  • How can I make a query by date with several TDMS files?

    Hi,
    I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that? 
    Thanks all,
    Val 

    Hello Val_Auto.
    You're Brazilian, no? Me too. = ^ - ^ =
    I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
    This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
    Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
    If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
    Thank you for your contact; I hope have helped you and succeed in your application.
    Wesley Rocha
    Application Engineer
    National Instruments Brazil
    Visite a nossa comunidade em PORTUGUÊS!!!
    Attachments:
    Query TDMS.vi ‏62 KB
    tdms search.vi ‏24 KB

  • Can I Make a Leopard Boot disk with my Free Agent Desk 1.5TB External Hard Drive?

    Can I Make a Leopard Boot disk with my Free Agent Desk 1.5TB External Hard Drive?  Using my Power Mac G5 Dual 2.0Gig original computer?

    Only if it is a FireWire interface.  The G5's won't boot to a USB 2.0 drive.

  • HT201303 how can i make my photo be entered with a password

    how can i make my photo be entered with a password

    Photo?  You cannot separately password protect a photo.
    You can password protect your iPhone at Settings > General > Touch ID & Passcode

Maybe you are looking for

  • Can I get an older version of Pages for my iPad?

    I'm not ready to move to Mavericks on my 3 computers, but the new Pages on my new ipad mini won't coordinate with Pages on my macs. Is there any way to get the OLD version that worked in ios7?

  • Error on invoice "specify payment period baseline date".

    Hi Experts, When I create ZMIRO, ZMIRO it keeps asking for a baseline date which we have never had to do before Payment terms  filled blank, but teh system throughs error message "specify payment period baseline date". I Please help. Thanks,

  • Power Cable issue with NOMAD

    I've had my nomad zen for over 2 years and it's worked great. However yesterday i went to plug it in to charge and no power was going into it. I felt the mid cable box (which i think converts AC to DC) and it was warm. So this a.m. i tried charging a

  • Trading partner in FB08

    Hi When I try to reverse a document in TC FB08 I get an error message saying that i need to enter a trading partner. But I can't find any field for this. Does anybody know what to do? / Henrik

  • Only the last web page displays.

    Whether I have 2 tabs or 20 tabs open, and regardless of which tab I click on, the website displayed is that of the LAST (right-most) tab - even though address bar displays the appropriate website, and even after I hit refresh, the display remains "s