CS4 Copy and paste to new Project

When I copy (or cut) and paste an audio clip to a new project timeline the sound is fine but after I save the project I see the video and the sound file but no sound. The sound file still plays in Soundbooth but not on the project timeline. I tried rendering the clip but no lucki. Any suggestions? Thank you in advance.
These are the files properties:
File Path: C:\Heritage\Aftergut\Movie\Untitled Clip 02 Audio Extracted_1
Type: Windows WAVE audio file
File Size: 514.2 MB
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:46:48:19468
Average Data Rate: 187 KB / second

Hi Bill,
I haven't remapped the keyboard. In the CS4 (which I am using) help shows "M" as the key for Match Frame. Also I am targetingthe audio track and moving the CTI over it and pressing "M" as you suggest but no luck.
I guess I will just have to find another work method to complete my project but I really thank you for your efforts on my behalf
Regards
Stanley
Stanley Dalnekoff, President
70 Marvel Road
New Haven, CT 06515
Tel:203-397-0775-O
203-464-4975-C
www.heritagevideo.net
Date: Thu, 3 Jun 2010 09:41:30 -0600
From: [email protected]
To: [email protected]
Subject: CS4 Copy and paste to new Project
Stanely,
One thought - have you remapped your keyboard?
Also, and a CS5 user will have to step in here, it could be that Match Frame has changed. It did between PrPro 2.0 and CS3/CS4, so it is possible. In the CS5 Help file, what is shown for the keystroke?
Last, are you Targeting your Audio Track, Selecting the Audio, moving the CTI over it, and then pressing M?
Just thinking there, and good luck,
Hunt
>

Similar Messages

I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the adresses and all my messages (copy and past in new Thunderbird after install)

I need to reinstall my Linux Mint 17 mate, therfore also Thunderbird. How can I save the adresses and all my messages (copy and past in new Thunderbird after install)?

Thank you for your suggestion. I have installed Linux Mint 17.1 with the Thunderbird and everything I had installed was still there. So, I didn´t need these mesures.
Thanks anyway.

(CS4) Copy and paste video/sound into another project, sound won't export

Hello Adobe community
I am working on a TV show for a community television network in Australia. I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
Thanks for your time! I have a looming deadline so your help is much appreciated.
-Robert

Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
Thanks heaps for all your help!
-Linus

Can I Copy and Paste From One Project To Another?

I have a scrolling title working very nicely in one project and wanted to "simply" copy and paste it into another project. After doing the copy on project 1, when I get to project 2 to do the paste, there is nothing there to paste. Is this something with Premiere Elements 12, or with my iMac for not keeping what I copied in the appropriate buffer? I found something online that implied there was some software to do this but I can't believe that is the only solution.
I also created a "temporary" project for easier editing with pictures, transitions and sound added that I want to put into my "master" project. I could create an avi and bring it over but I was hoping to have the finished project all in one source. Any thoughts would be appreciated. Thanks.
Rick

Thanks for the info. I'll keep that in mind if I ever want to do it again. Unfortunately, I had already just re-done it in the master before I saw this. Amazingly (to me, anyway), I couldn't even cut and paste the TEXT in the title to a Word doc just to save me from keying it in again. (It was more than a title - it was like movie credits with names, songs, etc.) I figured I could at least cut and paste the text.
The bigger issue was I had done a "save as" of my main project, deleted all but the 55 pictures I had, then added transitions and music, burned it to a RW DVD so I could see how it looked, then figured if it looked good I would just copy and paste the info into my master. Well I wound up redoing that as well once I figured out I couldn't do that. In Pinnacle, whether it was a title or just the video track or audio or both it was a simple highlight of what I wanted, copy it, close that project, open another one, paste it in. Done.
I also had trouble editing today. If I edited my pictures, maybe changed one or added one, it messed up my soundtrack. In Pinnacle I would click a lock icon on the timeline and edit either the audio or video to my heart's content and not mess up the other track. I could leave the audio in place but replace the video. For my daughter's wedding, for example, I took video from 3 different cameras but used the audio from just one so it played smoothly but I could switch the video around for the best shots and it looked very good.
Dare I ask how to lock just the audio or video track? Don't spend a lot of time replying. I already edited my music file by putting it way out in the timeline where there wasn't any video track. Then I could split the audio clip, copy part of it, and paste it back in. I needed the music to last a little longer while the pictures were displaying. Then when I was done I moved it where I wanted, but even at that, I had to be careful because moving it sometimes messed up the video track if I didn't do it just right.
The good news is I'm pretty much done with my video.

Indesign CS4 - copy and paste issue

Hello,
I just installed Indesign CS4 on a Mac 10.5.5 system and I am using Microsoft Word 2004 with the software.
The issue is when I copy and paste a graph or a clipart from Word 2004, I can paste the copied image in the INDD document. When I try to copy a second graph or image, Indesign will paste the original image.
I thought that clipboard may have been the issue and restarted the computer to empty the clipboard. Again, the same issue happens when I copied an image and the program somehow locks into that image.
Also, as soon as the graph/clipart is pasted in the indesign document, somehow, it becomes a link which should not be case if you are simply copying and pasting.
Here are some troubleshooting I tried:
- I trashed the preferences folder from the library folder
- created a new user account wiht admin priveleges
- restarted mac in safe boot
- created a new indesign document and a word document
Any thoughts?

I am attempting to place images which I am using within a mailer onto the web.
I am copying the images from InDesign into Photoshop and getting the same issues. If I close Indesign and re-open it I can copy 1 set of images, but when I attempt a second it places the images I copied originally into the shapes of the second images.
Any clues on how to solve this issue?

Why does formatting get lost when copy and pasting slides between projects?

I'm beginning to copy and paste several slides from a project that was created in Captivate 6. I've opened the project in 7.0.1 and saved it. Next, I've copy and pasted about 20-30 slides from the old project into my new template. In the process, many slides have lost "bold" and "bullets". It's worth noting that many slides have remained correct. I also find myself having to reset slide templates and toggle off quiz buttons that I've already toggled off in old project.
This isn't part of the same problem, but related. When I copy slides from the new template I mentioned into the old one (in hopes that Advanced Actions would transfer correctly), I've noticed that none of the item names have transferred over with the copy and paste. Instead of seeing the button name I've created, it changes to "shape, text_caption, etc", the default.
I'm hoping the copy pasting between projects becomes more efficient, I'm finding myself burning unneccessary time doing more QA and microscopic investigation, although I suppose more QA isn't always a bad thing.
System is the following:
OSX 10.8.5
Captivate 7.0.1
Safari 6.0.5
Blood Type: oops, wrong forum.

When copy/pasting between different versions that has always been a problem, especially with question slides. There seem always to be changes that make such a transfer difficult. Did you try to open the CP6 project first in CP7 and see what worked? And do you use exactly the same theme (object styles, master slides, skin editor)?
Copy/paste slides, objects with advanced actions: bit same problem, works best if done between CP7 projects. The problem that each object needs to have a unique ID (name) is what causes the renaming to generic names.
Lilybiri

AI CS4 - Copy and paste crashes application

Yet another crash because I copied and pasted a few lines of text. And more time from my day wasted redoing work because AI CS4 is a mess.
CS3 was more stable and faster. CS4 would appear to be a disapointing grab for profits. As premature as it is slow and broken.

Thank you for the suggestion.
The text is coming from another text field in the same AI CS4 file. Unfortunately, it's not the first time this has happened although I can't explain why it occurs sometimes and not others. Nothing odd about the text at all. No funny characters. Lorem Ipsum. *Shrug*
I tried pasting it into text wrangler to clear out any junk and had the same problem when I attempted to copy it back. I think the recieving text box was somehow currupt if that is possible. I ended up converting the other text field to suite my purposes.

Can no longer copy and paste with new version. Articles you provided did not help.

When I try to copy and paste in firefox it says I can't do it any longer. It's a security issue, and the "learn more" tab gives some abstruse directions about completely closing firefox, and then getting back in without opening it to a place I can't find.
Could you please tell me how to re-enable these necessary functions in an understandable way?

Is this only on one website? some websites disable copy and pasting for various reasons.
If this happens on every website, have you tried to start Firefox up in [[Safe Mode|Safe Mode]]? It may be an extension causing the problem.
Also, go ahead and update to Firefox 11, since it does have several bug fixes (I don't recall anything related to copy and paste, but give it a go [http://www.getfirefox.com www.getfirefox.com] )
Or, you may have some sort of virus which is interfering with your copy and paste. Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
Let me know if you are still having problems after these steps!

Cs4 copy and paste into word

Hi
Can someone please tell me how to copy a picture with no background in cs4 and paste into word again without the background
i have done it before on earlier versions but i can't remember.
Matt

Huh! Shows how little I know about Word these days.
I found you can even do a text wrap around an object in a PNG file.

Using Clipmate to copy and paste between projects

Thanks to Robert Johnston for the inspiration (and perspiration) for this method for copying and pasting between PE projects. One residual side effect of the method is that the audio and video of the copied clips will be unlinked. The renaming folders business is a workaround to avoid the silent audio problem after a project has been saved and reloaded.
1. Rename the folders of all audio files (including AVI files) used in the project to be copied.
2. Start PE and load in the project to be copied.
3. When asked, tell PE where the missing files are. (Check the box marked "Display Only Exact Name Matches".) Press Select.
4. Highlight parts (or all) of the project to be copied, in the timeline.
5. Copy the highlighted parts.
6. Copy into Clipmate:
6.1 Edit > Capture Special
6.2 Check both items in the list
6.3 OK
7. Close PE without saving.
8. Rename the folders of the audio files back again.
9. Open destination project in PE.
10. Re-select the copied info in Clipmate (closing the project in PE caused the clipboard to be cleared):
10.1 Select anything in the Clipmate list except the wanted item.
10.2 Select the wanted item (selecting an item loads it onto the clipboard).
11. Position the CTI to the wanted insertion point.
12. Do Edit > Paste Insert.
13. The pasted items will be highlighted in Media Panel. While still highlighted, select the Media Panel and do: Edit > Locate Media.
14. Tell PE where the files are.
15. Save project.

When combining projects, it is best to do your pruning of unwanted clips and other resources BEFORE you combine them, because once the Media Panel gets heavily loaded, PE is liable to crash.
Deleting the unused resources in Media Panel is quite easy in PE3 and PE4. Simply click on the "used" column heading, and the resources will be sorted into two groups of used and unused. Just click on the resource at one end of the unused range and shift click on the resource at the other end to select the whole range, then press delete. (Note that shift works normally in this panel, unlike in the timeline!) However, it is not strictly necessary to delete unused resources before copying and pasting because only resources selected on the timeline will be copied. PE will load and save a lot quicker if unwanted resources are deleted.
My feeling is that PE4 is somewhat more unstable than PE3, but I haven't done a proper direct comparison. For some reason after a crash the autosave often doesn't seem to have done its job properly, even though I set it to save every 10 mins. So make use of the Save button Adobe gave back to us in PE4 and save often, particularly before you use the titler or fiddle with the Media Panel.

Copy and paste between projects???

Hello,
iMovie '09 allows users to copy and paste clips between projects, but it do so with affecting quality. I mean is it the same as dragging clips from Events?
NOTE: I won't be home to check this for a week and I'm trying to help a friend via e-mail. So any help would be great.
Thank you.

It does not affect quality. When you copy a clip from a project, you are copying a reference to certain frames in an event.

How to copy and paste avail information onto web address bar when receiving e-mail

When I get an e-mail with new information that I have applied to a certain website and cannot click it on, the e-mail tells me to copy and paste the new information on the address bar of my web browser ???? How do I do this; highlight the area to be copied (which I can find "copy" at the top of my e-mails), but can't find "paste" anywhere???
Thank You!!
Maddy6
(Personal information removed by moderator)
This question was solved.
View Solution.

Hello, and Welcome to the HP Support Community!
It would help us reply to you if you gave us more information... Which HP device are you using? A Windows PC with a keyboard?
An Android Tablet? A ChromeBook?
If Windows, the keyboard shortcuts always work. Highlight the address, type "Control-C" to copy the information.
Now click in the address box of the browser and using the keyboard, type "Control-V" to Paste. Think as the "V" as an arrow pointing to "paste it here!"
(To perform each function, press and hold the control key first, then tap the letter you wish).
Other ways to paste is to right-click your mouse and choose "Paste" (after copying something).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Copy and Paste Capilization

I have a need to capitalize long paragraphs of text from Pages, and paste them in another program for a website.
However, when I use the auto-capitalization feature in pages, and then copy and paste, the new program does not recognize that they should be in capital letters, and reverts back to the original state.
Is there a way to make other programs recognize the capitals when pasting?
Thanks

Brendynz wrote:
Copywriters don't always write copy the way that the designers want it to appear. Hence opening their deck and changing the case so I can bring it into Photoshop/flash/xml the way the designer wants it.
The Designer styles the text the way they want it. In Pages using the style functions.
In the website using X/HTML and CSS. Which I showed you how to do.
Everyone can defend the app as much as they want. But it's an extra step or extra install that is should not be required. Not everyone wants to search for and install a new app for something like this which has been done in every other major word processing application for years.
It is not a new app it is a specific code snippet, which Apple has cleverly allowed for, to extend functions throughout OSX and contains many more functions.
I buy Mac because usually they do good work, and I do trust them (It's the smaller companies I was referring to by the way, thanks for reading. People can't be expected to be fully up-to-date on who all the smaller players are). This time Apple tried to make it easier for those using their own app, but forgot that people use other apps at the same time.
You have the solution in your hands, the one we all use and I dare say we have a lot of experience between us.
Use it or don't. Solve your problem in 5 minutes or wait forever for something Apple sees as already covered by Services.
Peter

Copy and paste armature in new .fla? (CS4)

I've got a rather elaborate bones armature built in one .fla file and I'd like to copy and paste it into another .fla. But I'll be snookered if I can find any way to copy the setup. Is this something that can be done at all??
Many thanks.
Bruce

What I did when I was trying to copy and paste a pose from a frame in an armature and paste it to another frame in the same document was:
Make sure the armature layer is NOT selected.
Left click on the pose frame you want to copy (if layer is selected "copy pose" will be grayed out) and click "Copy Pose".
This will copy the pose in the frame, but also select the layer.
Click OFF the armature layer so it is NOT selected.
Left click on the frame in the armature you want to paste pose to and click "Paste Pose".
I know you asked to paste in another document, but maybe if you play around with this process you can figure out how to do what you need.

Time stretching when copying and pasting between projects

I have had 18 separate instrument tracks of a live gig recorded in pro tools, so I simply imported the audio files into logic. I am also using the audio from a video camera to capture the reverb of the hall. The problem is that the audio files are 3 hours long and I would like to mix each song separately. To do this I would like to have a project for each song.
So I have cut the files up into their respective songs, the problem comes when I try and copy the tracks into a new project. The audio files get stretched making the tuning and tempo lower. I have tried copying and pasting as well as dragging the files over to the new project one at a time. I have also checked that the sample rates are the same, which they are.
Does anyone know why logic would be doing this? Are there any fixes you can recommend?
Thanks,
Dave

The sample rates of the files may be the same, while those of the projects may not.
Really, if it's slower and lower, by just about a semitone, then you're definitely playing a 48kHz file in a 44.1kHz project.
Christian

CS4 Copy and paste to new Project

Similar Messages

Maybe you are looking for