CS4 Design view does not render CSS correctly but browser does !?!?

I am designing a layout using primarily CSS. I want to insert a table inside one of the div's. In design view the table gets pushed way out of position but in live view and on the web, the page looks correct. Why? Am I missing something in design view?
Here is the actual page I am working on Sample Page
Here is what I see in design view Design View
This glitch is making it difficult to add content to the table.
I tried to edit the page with Contribute CS4 and the table gets pushed so far out of position that it is impossible to access it. The page looks fine when I am connected but as soon as I try to edit it does not render properly.

This question comes up almost daily, and I dont recall seeing an answer that is much different.  It comes down to that it does not matter what DV shows, it is the browser view that counts.  How frustrating it is to spend time and effort to correct a view in DW Design, only to find out it throws your browser view all askew. Its hard enough to make x number of different browsers all look good with however many screen resolutions, to worry about something that in the end does not matter.....
Work more in code view, let F12 be your companion.
Gary

Similar Messages

  • Eclipse "selection does not contain main type" - but it does contain a main

    Hi!
    I'm having a strange thing happen to me when using the eclipse IDE in a macintosh envirnment.
    I imported a project, complete with package, and all of my classes. and when I try to run my main class, it tells me "selection does not contain main type".
    Which is entirely untrue, the class I am trying to run contains a public static void main(), does anyone know what's going on here?

    the class is quite large, I don't think that it is a problem with the class, because it runs fine on my windows based pc (also in eclipse)...

  • Imported CD does not show in Library, but it does show in Recently Added playlist

    Imported a CD but it does not appear in the Library, althouhg it does show in the Recently Added playlist

    I seen a few references to things like this in the forum over the past couple of months but no real solutions.  Maybe it's a small bug affecting a few lucky people, but obviously not widespread or we'd see tons of posts.
    I suggest using the right+click reveal in Finder command to reveal the actual files. Delete the entries in iTunes without deleting the actual files, then add the files again by dragging them to iTunes.  Let us know if this works because I'm sure others would like to know.
    If it doesn't work, I wonder if there is some characteristic like somethng in the labels that is causing iTunes to not enter these in the library.
    Another thing you could try first is restarting iTunes and see if it's just a matter of it not properly refreshing its listing.

  • Firefox 4 does not support AVG Safesearch but IE9 does!!! Why?

    I decided to install Firefox 4 but it does not support AVG safe search or it's very useful link scanner, so for safer browsing I have reverted back to version 3.6.16.
    However Internet explorer 9 from MS supports AVG! I accept that AVG ought to release a new version, but why can Microsoft continue support in their completely re-vamped browser and Mozilla cannot, since all my other add-ons were still compatible?
    For reference I am running on Win7 home premium Sp1 64bit, AMD Phenom IIX4 N930 CPU @2.0Ghz , 4GB DDR3 Ram and an ATi HD5470 512MB Graphics Card.
    In conclusion, it would be fantastic to see Mozilla tweak the settings (if possible) to allow AVG safe search to work with Firefox 4, Until then I will go on using 3.6 and IE9 from Microsoft.

    Close Firefox 4. Go to C:\Program Files (x86)\AVG\AVG10\Firefox and open install.rdf in Notepad. Change 3.6.* to 4.0.* exit and save. Done.

  • My webpage does not show on Firefox, but it does on other browsers

    I have a personal website, http://www.kryshu.com that I have created myself on Dreamweaver. I have 7 pages and all except one appear on Firefox. Everything was fine until a couple of months ago when I updated some of the pages, again on Dreamweaver. All of a sudden my 'Portfolio - images' page does not show anything. It is empty - blank. It had text and images. I reloaded several times but each time the 'Portfolio - images' page is blank.
    This happened only on Firefox. On Internet Explorer and Chrome the page works fine.
    So, I presume the problem is with Firefox. What should I do?

    The content is on the page, but is shifted down considerably.
    Looks that this is caused by a simple typo: height="790%" instead of height="790" for one of the tables that causes all content to get shifted down.
    <pre><nowiki><table width="672" height="790%" border="0" cellpadding="0" cellspacing="0"></nowiki></pre>

  • WebI XI 3.1 Report does not fresh in IE6 but it does in IE7

    Short Text    
    WebI Report Does Not Refresh in IE6    
    Long Text    
    BO XI 3.1 Windows Server 2003 x64, XP Desk tops with a mixture of IE6
    and IE 7.
    We have a universe with managed access rights enables at the group
    level. The groups we have are: Batu, AUS, and Admin. When someone logs
    in as TEST_USER_BATU (user is in the Batu group) the report does not
    refresh. The LOVs can be refresh but the report comes back blank. When
    we repeat the same work flow in IE7 the report comes back with data.
    We have repeated this test on several computers including the servers
    running IE6.       
    Steps for Reconstruction    
    1)Create Universe with managed access restrictions
    2)Restrict groups at the row level including LOVs (see below example)
    2.a) Batu Group
    2.b) AUS Group
    2.c) Admin Group
    3) Create restrictions for the Batu and AUS group only.
    4)Create generic WebI report applicable for all groups
    5) Run WebI Report using a different account for each account in
    different group.
    6) You will find that the users in the restricted groups can not
    refresh the report but the user in the admin group can run the report

    Hi all,
    Thanks for your responses but nothing seems to be working.
    @Mark, Sahil: The properties of the field  is set as type "DATE" in the universe.
    @Manpreet: Not feasible with timestamp data.
    @Anuj: I tried your solution. But it does not work. Its really weird. The date part of the string gets sorted but the time part does not. I have tried splitting the data into date and time into 2 seperate variables and then sorting them, but still the time does not get sorted. The time is also converted to 24 hour format. I have also tried removing the blanks in the data  between date and time and converting the same to number. No effect.
    Any other ideas?
    Kind regards,
    Minuj

  • Firefox 6 running under Windows 7 64-bit does not render fonts correctly.

    The default sans-serif font for Firefox is Arial. Running Firefox 6 under Windows 7 32-bit, the font renders properly, but under 64-bit Win7, the font is too heavy, and bold or strong makes no difference. I run Win7 64-bit on a laptop computer and use Firefox 5 on it, and the fonts render properly. Possibly a Firefox 6/64-bit problem?

    Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
    That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
    * [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
    * [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

  • My mac book pro does not boot up correctly anymore after doing some updates. I did have my ipod charging to my mac book. I ran the simple updates and never go to the maverick update and now my computer will not boot correctly. Help!

    Please help my computer is not repsonding after doing some simple updates. I follow the instructions and which is simply click for the update to take place. I did what I was instructed to do. I did not do the new update for the Mavericks yet. I just did simple updates. The computer shutted down and restarted but would never get pass the grey screen with the spinning wheel and the booting bar that would not go past a certain point befor shutting off again. The computer is practically brand new. I purchased the computer from best by 2012 and the warrenty just ended the past October. I hardly use the computer maybe 4 times since I have had it because I have another main computer that I uses. However, I don't want to do a hard rest becuase I do have the entire adobe suits software that I paid for and don't want to loose. I have an appointment with apple today to see what they say but I hope that my computer that I hardly every use is not defected after doing a updated pushed by Apple. Any thoughts or suggestions???? Thanks in advance Apple Family :-)

    Well, I was at Apple for sometime on that day. I got a Genius that did not want to work. She basically jumped to the money to tell me that my hard drive was no good and that I was out of warranty (October 2013). I began to explain to her that I had only used the computer 5 times and that I don't use this computer as my main computer because I also have a Toshiba that is less expensive that I have had for several years and not one issue out of it. The rep told me that I could by a new hard drive for $161.00 and that I would loose all of my software and photos that I have on this computer. However, I told her that it's bazaar that it happens right after my warranty goes out and had I used it more often when in warranty before October then I would have been covered. Keeping in mind that I would still be very disappointed with the product because I would loose all of my information and it would not make sense to me why the hard drive fails on a very gently used computer. So I asked for a manager and it took her some time to get one. In the mean time I watched how the other Geniuses interacted with the other customers and seen that they were very engaging with convo and very help. I guess I just I got another lemon when I got my rep. When the manager finally came. I went from A-Z with the issues and that I felt that something could or should be done because the rep said that she did tests on my machine and it read to her that my hard drive was bad and there was nothing that could be done. I explained that I was not looking forward to paying for services to have my new computer repaired. The manager offered to give me 25% off the cost but I still didn't feel that it was effective. After he left and the rep wrote the notes in the system, I told her that I didn't think that all options had been exhausted and that there was something else that could be done. I told her to erase the machine and see if the updates could be installed and if the system would continue to do the same thing. The rep was hesitant and said that I would loose everything which we already know that we were at conclusion from the beginning. She assured me that I would happen again and that I would need a new hard drive. I just told her to erase the machine and get me another manager because I was just getting tired of her unhelpfulness and negative perspective. The new manager came and was very pleasant and I explained everything once again from A-Z. I informed him that I had the machine erased and that I need his help with options because I don't feel that the rep or the last manager was resourceful or helpful. He apologies for the actions of the reps and proceed to tell me that they will run all the updates in the store and that if it booted correctly that I should continue to use the machine with out adding the adobe software back on just incase that it crashes again and I'm out of money once again. However, if it does happen again and it is a hard drive issues that he would work with me to resolve the issues. As my computer went through the process of rebooting from out of the box stage another rep approached me because he could tell that I was upset and not happy. I told he what had happen and he said I think I can help you a little more. He said that I just want to run further testing on you computer for different components to make sure that everything would work properly and pin point any issues. I was delighted with that option. Anything would help at this time especially someone who is willing to help. The first test that he ran was to for the hard drive and he said that since it failed the test the first time could be because the software update glitch and did update correctly which would make the test faulty and be negative. As I sit with finger crossed the test came back as a pass test that my hard drive was not the issue and that the update was the cause and that I did not have to buy a new hard drive. I was happy that the computer was ok but I lost information. All of the updates were done in the store and everything works fine now. If I was not persistent about my gut feeling then I would had left out thinking that I had to pay for a new hard drive that I really didn't needed. Now I can invest that money in a external hard drive to start backing up my information. Lesson learned by I'm still on the fence about things but I hope all is well. I really went through a lot. No help or no service was not an option that I was taken.  I hope that it helps.

  • While in Edit Mode in Moodle - page content does not render at all, but I am able to display the underlying HTML code. Happens only after upgrade to Firefox 11.0.

    While in edit mode in the Moodle course management system, the Page Content window should display the page as it will appear to the user. If you click on the "Edit" button, you are able to view the HTML code for the page. However, when you return to the normal display mode, the page is blank. This has occurred after the upgrade to Firefox 11.0. Page is normally rendered in Internet Explorer.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Error_loading_websites
    *https://support.mozilla.org/kb/Error+loading+web+sites

  • Tree does not show node correctly but node are inserted well ?

    hi,
    i am haveing tree with
    1. Root node (grand parent (only one))
    2.Parent nodes(many nodes)
    3.child nodes(many nodes)
    i add child node in a particular parent node . this is done dynamically when socket thread found any any user .when socket listener thread found any user
    it add one user node (child node) in one of parent node
    when add child node some time tree view like this
    root
    |_ parent1
    |    |_ child1
    |    |_ child2
    |_ parent2  
    |    |_ child1
    |    |
    |    |
    |    |_child2
    |_ parent3
         |_child1
         _child2please have a look in parent 2 and parent 3. in parent 2 node just long gap
    between child nodes. But parent3 there is no line between childs.
    when a thread found an user on network , to add an node in tree i use
    treeModel.insertNodeInto(node, treenode, index);
            expandSelectedNode();But, this is generally happend when a node added by socket thread. So this i changed this section of code into EventQueu.invokeLater(); to do add by event queue thread. But it still come like this

    EventQueu.invokeLater();From where do you call this?
    We may need to see a small example code that can reproduce the problem.

  • Firefox for xoom does not render images as clearly as does the xom native browser

    I use a self generated home page with icons for my most visited sites. The url is www.dmdefd.com. Using Firefox mobile on the Xoom the images on that page look very poor. They look just fine using the chrome browser that comes with the Xoom.

    This is a known problem with Firefox; we are still working on optimizing our image scaling code so that higher-quality image rendering can be used on mobile devices like the Xoom. For technical details, see https://wiki.mozilla.org/Fennec/Features/imgscale

  • My ipod nano does not appear in itunes but it does appear in my computer

    I was trying to synch a cd in my library to my ipod and my ipod no longer appears in my itunes, it does appear on my computer

    Since noticing this problem, have you shut down or restarted your computer?  If not, I would shut down (power off) the computer.  Use this procedure to reset the iPod
    http://support.apple.com/kb/HT1320
    Start up computer with iPod NOT connected.  Run iTunes.  Connect iPod.

  • TOC in merged slave project does not find the page, but Search does

    I have a slave CHM file, where the TOC is non-binary. This is
    merged into a master project, which also has a TOC that is
    non-binary. When I view the merged project, just from RoboHelp, the
    TOC includes the slave embedded properly in the master TOC.
    However, clicking on a TOC in the slave products "The page cannot
    be displayed". If I go to the Search tab and enter something to
    search on that will bring up a topic in the slave project, then
    select that topic, the topic's page is displayed properly, and if I
    click back to the Contents tab, the TOC has sync-ed properly, but
    still, if I click again on the same topic on the Contents tab, I
    get "The page cannot be displayed" again. It seems that the TOC is
    not decoding paths properly. Any ideas?

    Merged project pages are listed in the TOC but will not
    display when selected? But a Search for these ‘missing’
    pages returns viewable results? You have a minor problem with your
    TOC settings. Follow the procedure below to solve it:
    1. Open the master project that references the external .chm
    files.
    2. Click the Project tab.
    3. Open the Single Source Layout folder.
    4. Right-click Microsoft HTML Help (Primary Layout) and
    select Properties.
    5. Click the Advanced button.
    6. Select the TOC Styles tab.
    7. Alongside the Default Window section click the drop down
    and select <Default>.
    8. Ensure that any previously generated .chm files are
    deleted using Windows Explorer before regenerating your Primary
    Layout.
    Open and delete the files from the directory specified in the
    Select Output Folder and File Name text box in the Properties
    window attached to the Microsoft HTML Help (Primary Layout) (see
    above).
    9. Generate your Primary Layout.

  • New-virtualdisk does not create tired storage, but gui does.

    Hi
    I'm trying to create a Storage Pool with a virtual disk with tierd storage.
    Got 2 SSD and 2 HDD.
    Created my pool and then I'm trying to create a disk using my ssd and hdd.
    $ssd_tier = New-StorageTier -StoragePoolFriendlyName "SnabbPool" -FriendlyName SSD_Tier -MediaType SSD
    $hdd_tier = New-StorageTier -StoragePoolFriendlyName "SnabbPool" -FriendlyName HDD_Tier -MediaType HDD
    New-VirtualDisk -StoragePoolFriendlyName "SnabbPool" -FriendlyName TierdDisk1 –StorageTiers @($ssd_tier, $hdd_tier) -StorageTierSizes @(110GB,2700GB) -ResiliencySettingName Mirror -WriteCacheSize 5GB -NumberOfColumns 1
    The Disk gets created, but it's not tierd.
    If a use the GUI i can create a tierd disk but then i only get 1GB of cache...and i want to do it with powershell.
    Anyone seeing an error in mylines ?
    One thing i think is wierd is that if i run a get-storagaTier after new-storagetier i get nothing returned.

    Hi,
    Do you mean that you cannot get any storage tier when you run Get-StorageTier command? Is there any error message in the Event Log? Please run the command “Get-Storagepool -FriendlyName SnabbPool | fl” and “Get-VirtualDisk -FriendlyName TierdDisk1| fl” and
    post the commands output.
    You could refer to the article below to monitor storage tier performance:
    Monitor Storage Tiers Performance in Windows Server 2012 R2
    http://technet.microsoft.com/en-us/library/dn789160.aspx
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • GavelSnipe does not function on Firefox, but it does on I.E.8 (which I am now having to use) - why

    Can get GavelSnipe onto/into Firefox and have it bookmarked. When you cut and paste an Ebay item number into GavelS and enter your max bid and ask it to be sniped, GavelS reverts you back to the sign in page and when I return to the input screen the details I last entered have not been recorded. Just loaded the same screens in IE8 and its carried out the functions perfectly

    Hello Welshwoody,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for