CS4 Doesn't export more than 2 minutes 30 seconds

No matter what format I choose - FLV / Mov / .avi / Premierre only exports 2 minutes and 30 seconds.
It was working fine for a while until I added some titles and some still images.
Any ideas?
Thanks Dave

Dave,
Also check that your Work Area Bar (WAB) is set to the full Duration of your Sequence. I've seen a few glitches, where even when one has checked "Entire Sequence," the WAB seems to override that - seldom, but it has happened to me.
Hunt

Similar Messages

  • I have a MacBook Air and whenever i edit in imovie which is more than 30 second it just doesn't respond.

    Hi, whenever i make a movie in my Macbook air which is more than 30 second and play it imovie doesn't respond. Please tell me what can i do.

    Hey samwise_lotr,
    Thanks for using Apple Support Communities.
    Start the computer in safe mode and see if iMovie opens. If it works you may want to remove unnecessary login items.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Have a nice day,
    Mario

  • I bought a ipad mini online from the apple store. His battery doesn't last more than 6h. I return it back to them they send me a new one, but the problem is same. Battery doesn't last more than 5-6h!

    I have purchased a iPad mini online from the Apple store. Since day one I had 2 issues with it. First is that the battery life doesn't last more than 5-6h active usage, and the second one is with the wi-fi. It works properly but after I leave it for a while in sleep mode and try to reuse it, it doesn't want to open a web page or app store or mail (anything connected with the internet search) but it shows that is properly connected with my home network. So I have to turn off the wi-fi connection and turn it on again so it start to work properly. After couple off days this becomed very annoying so I contacted the support via phone and they gave me instructions for return it and that I'll receive a new one without aditional fee. I get the second device in the predicted time but again I have the same issues with the wi-fi and battery life. I will be pleased if someone from the Apple expert team explaine to me what should I do, because I dont find it for normal what is happening. On the Apple official site under the specifications for iPad mini it says that the battery lasts for at least 10h and the wi-fi problem isn't mentioned anywhere. Thanks in advance.

    This is a user to user forum. No one here is an employee or representative of Apple.
    If you want someone from Apple to explain what you should do make an appointment at an Apple store if there is one near you and take your iPad there and talk to Apple. If no Apple store is close enough then call Apple to find out what your alternatives are. There is a Contact Info link at the bottom of every page in this forum.

  • How can i play a movie in keynote from more than 600 seconds between other slides in a automatic loop

    How can i play a movie in keynote from more than 600 seconds between other slides in a automatic loop

    The maximum duration available for an automatic presentation in Keynote is 600 seconds.
    The alternatives are to export a QuickTime video, use other presentation applications, a media server player or digital signage application.

  • Ldap search query takes more than 10 seconds

    LDAP query takes more than 10 seconds to execute.
    For validating the policy configured, the Acess Manager(Sun Java System Access Manager) contacts the LDAP (Sun Java System Directory Server 6.2) to get the users in a dynamic group. The time out value configured in Access Manager for LDAP searches is 10 seconds.
    Issue : The ldap query takes more than 10 seconds to execute at some times .
    The query is executing with less than 10 seconds in most of the cases, but it takes more than 10 seconds in some cases. The total number of users available in the ldap is less than 1500.
    7 etime =1
    6 etime =1
    102 etime=4
    51 etime=5
    26 etime=6
    5 etime=7
    4 etime=8
    From the ldap access logs we can see the following entry,some times the query takes more than 10 seconds,
    [28/May/2012:14:21:26 +0200] conn=281 op=41433 msgId=853995 - SRCH base="dc=****,dc=****,dc=com" scope=2 filter="(&(&(***=true)(**=true))(objectClass=vfperson))" attrs=ALL
    [28/May/2012:14:21:36 +0200] conn=281 op=41434 msgId=854001 - ABANDON targetop=41433 msgid=853995 nentries=884 etime=10
    The query was aborted by the access manger after 10 seconds.
    Please post your suggestions to resolve this issue .
    1.How we can find out , why the query is taking more than 10 seconds ?
    2.Next steps to resolve this issue .

    Hi Marco,
    Thanks for your suggestions.
    Sorry for replying late. I was out of office for few weeks.
    1) Have you already tuned the caches? (entry cache, db cache, filesystem cache?)
    We are using db cache and we have not done any turning for cache. The application was working fine and there was no much changes in the number of users .
    2) Unfortunately we don't have direct access to the environment and we have contacted the responsible team to verify the server health during the issue .
    Regarding the IO operations we can see that, load balancer is pinging the ldap sever every 15 seconds to check the status of ldap servers which yields a new connection on every hit. (on average per minute 8 connections - )
    3) We using cn=dsameuser to bind the directory server. Other configuration details for ldap
    LDAP Connection Pool Minimum Size: 1
    LDAP Connection Pool Maximum Size:10
    Maximum Results Returned from Search: 1700
    Search Timeout: 10
    Is the Search Timeout value configured is proper ? ( We have less than 1500 user in the ldap server).
    Also is there any impact if the value Maximum Results Returned from Search = set to 1700. ( The Sun document for AM says that the ideal value for this is 1000 and if its higher than this it will impact performance.
    The application was running without time out issue for last 2 years and there was no much increase in the number of users in the system. ( at the max 200 users added to the system in last 2 years.)
    Thanks,
    Jay

  • Apps taking more than 5 seconds to open

    My iPhone 3GS is running iOS4.0 and recently, all applications take more than 5 seconds to open. Whenever i open an application, it will only open / load after 5 seconds. Help is needed here

    Ivan Cheah wrote:
    I have tried resetting and off my phone for more than 5 minutes but no success
    Did you actually power down the phone or did you simply put it to sleep?
    The issue you describe sounds like the device is simply in need of a reboot. Press and hold the sleep/wake button and home button until the Apple logo appears, ignoring the "Slide to Power off" screen.

  • Can a QuickTime movie play for more than 60 seconds per page

    Can a Quicktime movie be set to play for more than 1 minute per page in Keynote. I have clips that run up to 3 minutes. For now I have pulled the clip into 3 different pages and set the times to match but I get a 10 second delay between the pages that is very distracting.

    Yes I am trying to set up an automatic transition after the movie has played. I have still photos between the movies. I want the entire presentation to be self running. I did use the special builds in and out and have the action set at none. The movie clip will not run more than 60 seconds?

  • [SOLVED] Cannot start X: Xorg.bin blocked for more than 120 seconds

    I just rebooted my desktop after a couple of months and now I cannot run Xorg. When I run startx, I get a black screen for two minutes and then a backtrace pops up. At that point I can no longer interact with the console, but I can still ssh and run commands. I've tried setting Xwrapper.conf to needs_root_rights = yes and I have tried just running startx as root, with no help. I'm not sure how to isolate what would have broken this as I have updated so many packages in the last two months. Any ideas what I can try next?
    If it helps, I am using the open source ati driver and my xorg.conf.d is empty.
    Here is the dmesg showing the oops and the backtrace:
    [ 72.778340] BUG: unable to handle kernel paging request at ffffec2003fffe00
    [ 72.778368] IP: [<ffffffff811ac636>] kfree+0x56/0x1a0
    [ 72.778389] PGD 0
    [ 72.778397] Oops: 0000 [#1] PREEMPT SMP
    [ 72.778413] Modules linked in: cfg80211 it87 hwmon_vid xpad ff_memless fuse mousedev joydev eeepc_wmi asus_wmi sparse_keymap led_class rfkill video evdev mxm_wmi mac_hid kvm_amd kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd psmouse serio_raw radeon r8169 snd_hda_codec_realtek edac_core fam15h_power mii k10temp snd_hda_codec_generic edac_mce_amd sp5100_tco ttm snd_hda_codec_hdmi drm_kms_helper i2c_piix4 snd_hda_intel snd_hda_controller drm snd_hda_codec snd_hwdep snd_pcm hwmon i2c_algo_bit snd_timer i2c_core snd soundcore tpm_infineon tpm_tis tpm wmi shpchp button processor sch_fq_codel vboxnetflt(O) vboxnetadp(O) vboxdrv(O) ext4 crc16 mbcache jbd2 hid_generic usbhid hid sd_mod crc_t10dif crct10dif_common sr_mod
    [ 72.778702] cdrom atkbd libps2 ohci_pci ohci_hcd ehci_pci ahci sata_sil libahci xhci_hcd ehci_hcd libata usbcore usb_common scsi_mod i8042 serio zfs(PO) zunicode(PO) zavl(PO) zcommon(PO) znvpair(PO) spl(O)
    [ 72.779931] CPU: 7 PID: 1534 Comm: Xorg.bin Tainted: P O 3.17.4-1-ARCH #1
    [ 72.781110] Hardware name: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 1503 01/11/2013
    [ 72.782332] task: ffff880808b264a0 ti: ffff8807fcd30000 task.ti: ffff8807fcd30000
    [ 72.783574] RIP: 0010:[<ffffffff811ac636>] [<ffffffff811ac636>] kfree+0x56/0x1a0
    [ 72.784796] RSP: 0018:ffff8807fcd33a30 EFLAGS: 00010286
    [ 72.786010] RAX: 0000022003fffe00 RBX: 00001000ffff8807 RCX: 0000000000010005
    [ 72.787227] RDX: 000077ff80000000 RSI: 0000000000000007 RDI: 00001000ffff8807
    [ 72.788446] RBP: ffff8807fcd33a48 R08: 0000000000000007 R09: ffffec2003fffe00
    [ 72.789714] R10: 0000000000000017 R11: 0000000000000000 R12: ffff88080887a400
    [ 72.790978] R13: ffffffffa0678f8c R14: 00000000000108f0 R15: 0000000000001800
    [ 72.792211] FS: 00007f0dd095e8c0(0000) GS:ffff88083edc0000(0000) knlGS:0000000000000000
    [ 72.793455] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 72.794680] CR2: ffffec2003fffe00 CR3: 00000000b7c0c000 CR4: 00000000000407e0
    [ 72.795924] Stack:
    [ 72.797140] ffff880811db0000 ffff88080887a400 ffff880811db0000 ffff8807fcd33b30
    [ 72.798358] ffffffffa0678f8c 000000000000004c 000108480001092c ffff880700000008
    [ 72.799584] 0000ffff00010844 000000000001092c 0000000000010848 0000000000010844
    [ 72.800809] Call Trace:
    [ 72.802053] [<ffffffffa0678f8c>] evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
    [ 72.803320] [<ffffffffa052b8d4>] ? drm_detect_hdmi_monitor+0x74/0xc0 [drm]
    [ 72.804555] [<ffffffffa0681488>] radeon_atom_encoder_mode_set+0x178/0x3c0 [radeon]
    [ 72.805789] [<ffffffffa0563986>] drm_crtc_helper_set_mode+0x356/0x530 [drm_kms_helper]
    [ 72.807017] [<ffffffffa061b97c>] radeon_property_change_mode.isra.1+0x3c/0x40 [radeon]
    [ 72.808240] [<ffffffffa061bb2e>] radeon_connector_set_property+0x1ae/0x3f0 [radeon]
    [ 72.809490] [<ffffffffa05284e2>] drm_mode_obj_set_property_ioctl+0x1b2/0x3a0 [drm]
    [ 72.810736] [<ffffffffa052870f>] drm_mode_connector_property_set_ioctl+0x3f/0x60 [drm]
    [ 72.811961] [<ffffffffa0518fef>] drm_ioctl+0x1df/0x680 [drm]
    [ 72.813175] [<ffffffff8105e9ac>] ? __do_page_fault+0x2ec/0x600
    [ 72.814402] [<ffffffffa05f404c>] radeon_drm_ioctl+0x4c/0x80 [radeon]
    [ 72.815649] [<ffffffff811da5f0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 72.816899] [<ffffffff811ca161>] ? __sb_end_write+0x31/0x60
    [ 72.818124] [<ffffffff811da851>] SyS_ioctl+0x81/0xa0
    [ 72.819332] [<ffffffff8153db29>] system_call_fastpath+0x16/0x1b
    [ 72.820528] Code: 00 00 00 80 ff 77 00 00 49 b9 00 00 00 00 00 ea ff ff 48 01 d8 48 0f 42 15 e8 b9 66 00 48 01 d0 48 c1 e8 0c 48 c1 e0 06 49 01 c1 <49> 8b 01 f6 c4 80 0f 85 0e 01 00 00 49 8b 01 a8 80 0f 84 83 00
    [ 72.823135] RIP [<ffffffff811ac636>] kfree+0x56/0x1a0
    [ 72.824394] RSP <ffff8807fcd33a30>
    [ 72.825653] CR2: ffffec2003fffe00
    [ 240.461007] INFO: task Xorg.bin:1534 blocked for more than 120 seconds.
    [ 240.462414] Tainted: P O 3.17.4-1-ARCH #1
    [ 240.463701] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 240.465017] Xorg.bin D 0000000000000007 0 1534 1533 0x00000000
    [ 240.466325] ffff8807fcd333b0 0000000000000082 ffff880808b264a0 00000000000145c0
    [ 240.467623] ffff8807fcd33fd8 00000000000145c0 ffff880812e73250 ffff880808b264a0
    [ 240.468886] 0000000000000080 0000000000000140 0000000000001e00 000000000000000a
    [ 240.470155] Call Trace:
    [ 240.471435] [<ffffffff813113db>] ? bit_putcs+0x30b/0x590
    [ 240.472702] [<ffffffff81539519>] schedule+0x29/0x70
    [ 240.473964] [<ffffffff81539986>] schedule_preempt_disabled+0x16/0x20
    [ 240.475239] [<ffffffff8153b445>] __mutex_lock_slowpath+0xe5/0x250
    [ 240.476495] [<ffffffff8153b5c7>] mutex_lock+0x17/0x30
    [ 240.477770] [<ffffffffa0522f32>] drm_modeset_lock_all+0x42/0xd0 [drm]
    [ 240.479016] [<ffffffffa056d07f>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper]
    [ 240.480257] [<ffffffff8131683a>] fb_pan_display+0x9a/0x160
    [ 240.481508] [<ffffffff81310950>] bit_update_start+0x20/0x50
    [ 240.482732] [<ffffffff8130e15e>] fbcon_switch+0x3ae/0x5e0
    [ 240.483936] [<ffffffff81385899>] redraw_screen+0x1a9/0x250
    [ 240.485175] [<ffffffff8130d54a>] fbcon_blank+0x23a/0x340
    [ 240.486375] [<ffffffff8113e74f>] ? irq_work_queue+0xf/0xa0
    [ 240.487587] [<ffffffff810c476c>] ? wake_up_klogd+0x3c/0x60
    [ 240.488771] [<ffffffff810c4a12>] ? console_unlock+0x282/0x460
    [ 240.489894] [<ffffffff810d5d33>] ? internal_add_timer+0x63/0x80
    [ 240.490988] [<ffffffff810d6c54>] ? mod_timer+0x114/0x250
    [ 240.492058] [<ffffffff813863ba>] do_unblank_screen+0xaa/0x1d0
    [ 240.493075] [<ffffffff813864f0>] unblank_screen+0x10/0x20
    [ 240.494053] [<ffffffff812b7019>] bust_spinlocks+0x19/0x40
    [ 240.495011] [<ffffffff810186b4>] oops_end+0x34/0xe0
    [ 240.495982] [<ffffffff8105df4c>] no_context+0x17c/0x3c0
    [ 240.496934] [<ffffffff8105e2bd>] __bad_area_nosemaphore+0x12d/0x250
    [ 240.497886] [<ffffffff8105e3f3>] bad_area_nosemaphore+0x13/0x20
    [ 240.498842] [<ffffffff8105ea04>] __do_page_fault+0x344/0x600
    [ 240.499769] [<ffffffffa060fb4b>] ? atom_execute_table_locked+0x12b/0x3f0 [radeon]
    [ 240.500709] [<ffffffffa060e7c0>] ? atom_put_dst+0x480/0x560 [radeon]
    [ 240.501673] [<ffffffffa060dabb>] ? atom_op_test+0x9b/0x1b0 [radeon]
    [ 240.502640] [<ffffffffa0678f8c>] ? evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
    [ 240.503558] [<ffffffff8105ece2>] do_page_fault+0x22/0x30
    [ 240.504494] [<ffffffff8153f9f8>] page_fault+0x28/0x30
    [ 240.505441] [<ffffffffa0678f8c>] ? evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
    [ 240.506373] [<ffffffff811ac636>] ? kfree+0x56/0x1a0
    [ 240.507266] [<ffffffffa0678f8c>] evergreen_hdmi_setmode+0xd8c/0x1970 [radeon]
    [ 240.508204] [<ffffffffa052b8d4>] ? drm_detect_hdmi_monitor+0x74/0xc0 [drm]
    [ 240.509155] [<ffffffffa0681488>] radeon_atom_encoder_mode_set+0x178/0x3c0 [radeon]
    [ 240.510085] [<ffffffffa0563986>] drm_crtc_helper_set_mode+0x356/0x530 [drm_kms_helper]
    [ 240.511021] [<ffffffffa061b97c>] radeon_property_change_mode.isra.1+0x3c/0x40 [radeon]
    [ 240.511944] [<ffffffffa061bb2e>] radeon_connector_set_property+0x1ae/0x3f0 [radeon]
    [ 240.512875] [<ffffffffa05284e2>] drm_mode_obj_set_property_ioctl+0x1b2/0x3a0 [drm]
    [ 240.513791] [<ffffffffa052870f>] drm_mode_connector_property_set_ioctl+0x3f/0x60 [drm]
    [ 240.514728] [<ffffffffa0518fef>] drm_ioctl+0x1df/0x680 [drm]
    [ 240.515632] [<ffffffff8105e9ac>] ? __do_page_fault+0x2ec/0x600
    [ 240.516555] [<ffffffffa05f404c>] radeon_drm_ioctl+0x4c/0x80 [radeon]
    [ 240.517455] [<ffffffff811da5f0>] do_vfs_ioctl+0x2d0/0x4b0
    [ 240.518369] [<ffffffff811ca161>] ? __sb_end_write+0x31/0x60
    [ 240.519267] [<ffffffff811da851>] SyS_ioctl+0x81/0xa0
    [ 240.520176] [<ffffffff8153db29>] system_call_fastpath+0x16/0x1b
    [ 360.455851] INFO: task Xorg.bin:1534 blocked for more than 120 seconds.
    [ 360.456839] Tainted: P O 3.17.4-1-ARCH #1
    [ 360.457713] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 360.458629] Xorg.bin D 0000000000000007 0 1534 1533 0x00000000
    [ 360.459548] ffff8807fcd333b0 0000000000000082 ffff880808b264a0 00000000000145c0
    [ 360.460442] ffff8807fcd33fd8 00000000000145c0 ffff880812e73250 ffff880808b264a0
    [ 360.461294] 0000000000000080 0000000000000140 0000000000001e00 000000000000000a
    [ 360.462160] Call Trace:
    [ 360.463040] [<ffffffff813113db>] ? bit_putcs+0x30b/0x590
    [ 360.463880] [<ffffffff81539519>] schedule+0x29/0x70
    I do not see any errors in my Xorg.0.log file, but I've posted it here
    Last edited by smpolymen (2014-12-06 04:04:55)

    Ok, so I tried unplugging my HDMI monitor and that seems to prevent the hang. When I plug the monitor back in and try to have it detect, it hangs again. I tried connecting via DVI (desktop)-HDMI (monitor) cable instead and have the same issue. I wonder if my monitor is causing the issue (it is pretty flaky, taking several tries to turn it on,) although I find it odd that a bad monitor would cause the driver to hang. Maybe the monitor is not sending the right data to the driver to set the mode. I'll try to find another monitor and see if that resolves the issue.

  • When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

    When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
    I've tried rebuilding the thumbnail database, but that hasn't helped.

    What version of iPhoto and system are you running?
    Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left.  Does that let more than one photo display in the window?
    OT

  • In the evaluation mode im nt able to view my ocr result for more than 2 seconds

    im doing my final year project on image processing using labview 2010(evaluation). im using a microsoft webcam(VX-700). my objective is character recognition using vision. im able to capture an image and store the same. the software also recognizes the characters after training the characters in vision assistance. but im not able to view the result string for more than 5 seconds. i really want to have some support regarding this issue. i've attached the program what i've used with this message. plz do help me with this issue asap.
    Attachments:
    OCR First Example with integrated2.vi ‏120 KB

    Rudegar,
    Our network is very stable and we aren't seeing any problems with anything else and besides, these worked fine until we did the update.
    The wifi access point is in the same room about 6-8 ft. away and it's kind of hard to connect an appletv by ethernet to an iPad. 
    The appletv runs fine using it's built in applications, like Netflix, Disney, Radio, etc.
    All of this makes me think it's not a wireless problem, but it's something in the appletv software after doing the update that won't hold the iPad connection.
    I appreciate your suggestions and will pass your information along to our network person.
    Any other ideas?
    Thanks

  • Lightroom won't export more than one image at the time

    I am having trouble exporting my RAW files as JPEG files. At first Lightroom 4.4 seemed to skip certain photos when exporting and now I'm unable to export more than one image at the time. How can I fix this? I didn't seem to have this problem before the 4.4 update, but then again, the 4.4 update has been running for a few days now. I run on a 32bit Windows 7 with 4GB of RAM.
    Lightroom has also been a considerable lot slower since the last couple of days, yet there have been no changes at all to my computer or system or anything - nothing's changed expect for the fact that Lightroom isn't behaving as it used to.
    Can anyone help me?

    I think I've found the problem - I've accidentally 'synced' my folder instead of importing the RAW files. Which brings me to my next problem and question - I've already edited the RAW files and would really like it if there's a way I could re-import the files without losing my changes/metadata, is there anyway that's possible?

  • Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

    Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
    Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
    I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
    It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
    Does anyone have a work around or will this be fixed at some point by Apple?

  • I just got an iPod touch, it was fine with battery life before I added Apps but now the battery doesn't last more than a night, what should I do?

    I just got an ipod touch from my sister yesterday which she has had since October. The battery life went for days with her but as soon as I started checking my email and adding apps the battery doesn't last more than a couple of hours. I deleted some apps but no change. I also kept my email logged in and my notifications turned on so I'm wondering if they are part of the problem. Please let me know what I should do. Thank you so much.

    Yes, notifications are part of the problem.  For more information look at at the previous posts on this problem.  Yu can find some of those on the right hand side of this page under the heading: More Like This.  I keep mine in airplane mode when asleep.

  • Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • [SOLVED]"kernel: task blocked for more than 120 seconds"

    Hello,
    today I just found this weird message in journalctl after running "pacman -Syu". Everything (even the update) worked fine, nothing unexpected had happened. RPi works as expected. I just wan't to be sure that this problem is not signaling something bigger.
    Jun 16 09:17:06 smecpi sudo[6228]: puser : TTY=pts/0 ; PWD=/home/puser ; USER=root ; COMMAND=/usr/bin/pacman -Syu
    Jun 16 09:17:06 smecpi sudo[6228]: pam_unix(sudo:session): session opened for user root by puser(uid=0)
    Jun 16 09:19:53 smecpi kernel: INFO: task kworker/u2:0:6233 blocked for more than 120 seconds.
    Jun 16 09:19:53 smecpi kernel: Not tainted 3.12.21-1-ARCH #1
    Jun 16 09:19:53 smecpi kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    Jun 16 09:19:53 smecpi kernel: kworker/u2:0 D c05ce278 0 6233 2 0x00000000
    Jun 16 09:19:53 smecpi kernel: Workqueue: kmmcd mmc_rescan
    Jun 16 09:19:53 smecpi kernel: [<c05ce278>] (__schedule+0x290/0x5ec) from [<c04c43a0>] (__mmc_claim_host+0x90/0x1f0)
    Jun 16 09:19:53 smecpi kernel: [<c04c43a0>] (__mmc_claim_host+0x90/0x1f0) from [<c04cab3c>] (mmc_sd_detect+0x1c/0x70)
    Jun 16 09:19:53 smecpi kernel: [<c04cab3c>] (mmc_sd_detect+0x1c/0x70) from [<c04c6880>] (mmc_rescan+0x20c/0x3c8)
    Jun 16 09:19:53 smecpi kernel: [<c04c6880>] (mmc_rescan+0x20c/0x3c8) from [<c003b9b8>] (process_one_work+0x130/0x43c)
    Jun 16 09:19:53 smecpi kernel: [<c003b9b8>] (process_one_work+0x130/0x43c) from [<c003c908>] (worker_thread+0x134/0x3e4)
    Jun 16 09:19:53 smecpi kernel: [<c003c908>] (worker_thread+0x134/0x3e4) from [<c0042544>] (kthread+0xa4/0xb0)
    Jun 16 09:19:53 smecpi kernel: [<c0042544>] (kthread+0xa4/0xb0) from [<c000e178>] (ret_from_fork+0x14/0x3c)
    Last edited by Kotrfa (2014-06-16 11:41:42)

    Ir means just what it says. kworker (a kernel worker thread - https://raw.githubusercontent.com/torva … kqueue.txt) blocked for more than 120 seconds. This likely happened during one of pacman's big calculation jobs, and is also likely completely safe to ignore.
    Last edited by samiam (2014-06-16 10:20:13)

Maybe you are looking for

  • In Thunderbird, I cannot send email. I am asked to enter an email address in Mail and Newsgroup Account settings but when I click on this option, nothing opens.

    I can connect to Thunderbird and receive email. However, I cannot send emails. When I press send (either from replying to an email or entering an email address manually) I get the following error message: Sending of message failed. No sender specifie

  • HP LaserJet M1005 MFP

    Our company is using a HP LaserJet M1005 MFP all in one printer. this machine we purchase when our organisation had 2 staffs. but now we have 8 staffs and found difficult to handle this printer especially for scanning purpose. kindly advise us, how c

  • Why do Karaoke CD's change tempo when uploaded?

    I am new to Garageband. When I uploaded karaoke songs into iTunes they sounded fine, but when I transferred them to Garageband they sound slower and flat. When I noticed this I tried changing the tempo within Garageband but it wouldn't change, only t

  • Mountain Lion Upgrade

    I have a free upgrade to mountin lion. After waiting 3 days to get the email back from Apple, i atempted to download mountain lion using the code i got given, but it said "This code you entered is not recognised as a valid code". I now have 4 differe

  • Feature request - document security

    - Add touchid support and/or a passcode - Allow documents to be removed from the recent documents list, including those opened via mobile link (and/or require touchid/passcode to open)