CS4 DVD will not start

I am running XP Pro with SP3 and all current patches. My dvd drive is a Plextor PX-760A. At first neither the CS4 application dvd nor the Learning dvd would start in my drive.
Then I flashed the drive firmware from 1.04 to 1.07.
This drive uses the windows drivers. Plextor does not supply drivers.
After flashing the firmware the CS4 Learning dvd starts fine. I also found my CS3 dvd and it also starts fine.
However, the CS4 application dvd will not spin up. The drive makes 2 faint beeps, tries to spin up the disk a few times and then gives up.
Any suggestions on what I might try before calling Adobe and asking for a replacement disk?

Success!
A PC at the local library was able to spin up the Photoshop CS4 DVD. I then copied the files to an sdhc card via a USB card reader that I brought with me. Those files take a bit under 4GB.
Back home I scanned the card for malware, copied the files to an empty partition on one of my drives and then installed.
Installation was smooth, my serial # was accepted, and I have opened both Bridge and PS. I am good to go.

Similar Messages

DVD will not start up?

I insert the disk I wan't to play, and the iMac Super Drive will not start. It accepts the dvd. makes noise like it wants to start, but then makes a winding sound, stutters a few times, then makes the sound as if a dvd was re-inserted, but then it gets to a dead, nothing happening stop. period.cccccccc
If you can suggest any how to fix idea, we would really appreciate it.
Thank You.

What you're describing appears to be a failing or failed optical drive. Take your Mac to your nearest Apple Store or Apple Approved Repair Centre for diagnosis and repair.

CS4 trial will not start/open

I downloaded the full trial of DW CS4, clicked to open the
program, I get the green DW box and it will not go any further, I
disabled all firewalls and Virgin media security but it still won't
start/open.
All I get is the windows busy symbol, and then "program not
responding"

Are you on an Acer system?
Here is a reference post if you have an Acer computer
http://groups.google.com/group/macromedia.dreamweaver/browse_thread/thread/d20abb069b29048 6
and here is the file to download -
http://www.egistec.com/oem-acer001/program-update.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"G-A-R-Y" <[email protected]> wrote in
message
news:goohsv$chc$[email protected]..
>I downloaded the full trial of DW CS4, clicked to open
the program, I get
>the
> green DW box and it will not go any further, I disabled
all firewalls and
> Virgin media security but it still won't start/open.
> All I get is the windows busy symbol, and then "program
not responding"
>

Adobe CS4 Indesign will not start on Mac OSX 10.9

Hi everybody,
I recently ported my Adobe CS from an older Mac to a new machin under OSX 10.9. (Mavericks), i.e. i installed the suite from the originals DVDs. No errors were reported. I checked that all programs I need should be campatible. Acrobat Pro, Photoshop, Illustrator run fine. Indesign, however, does not start but signals an "Error 5". No further explanation. What could possibly be wrong?
Best regards,

Might be permissions to write the prefs. See Cant launch new inDesign CC | Adobe Community

Photoshop CS4 Trial Will not start. Error message will pop up saying ...

"Some of the application components are missing from the Application directory, Please reinstall the application."
-CS4 Photoshop
-Vista Home Premium
-HP
I've been at this for days, I've uninstalled, reinstalled, clean scripted, everything i could think of. I have no luck with anything! What is strange is that Bridge will still work, but just Photoshop alone won't.
If anyone could help .. in anyway at all, it would be greatly appreciated!

Bridge is not tied to any restrictions in terms of activation or requiring specific components to be in place, hence it almost always works. Do you correctly run the install with administrative privileges?
Mylenium

DVD will not start on my G4-flat panel

I have a G4 flat panel and a G5. I recently installed Tiger on my G4. I just bought a DVD from europe, but it can work both on european and american DVD players. This DVD works on my G5. But when I instert it in my G4, it doesnt even appear on the desktop. It says DVD+R on the DVD. I dont know mabye this has something to do with it. Anyone know what the problem might be, can I solve it?

Try resetting the PRAM on the G4. A weak or dead clock battery can also cause DVDs, CDs and FireWire not to show up.
Check out things in Texas Mac Mans tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies.
Cheers!
DALE

DVD will not stop and start in a Menue Mode

Hello I am using DVD Studio Pro 4 for a school project and i am looking for some help with this problem.
The DVD i have created plays and stops when i am watching one of my video tracks, i just can not start the DVD when i am previewing in any menue after i stop it.
I have created my DVD with 16 menus and 2 video tracks. It burns and plays back fine but i can not stop and start the DVD when i am in a menu mode. The DVD will stop and play when i stop the DVD playing video from one of my video tracks but when i am in menu i push stop on my DVD controller and the DVD will not start back up. The DVD will look like it wants to play but it will not play. I have to open the DVD player tray open in order for it to start the DVD again.
The DVD is a NTSC, SD, single layered 2.9GB
Any help would be much appreciated, Thanks.
Mike
PowerBook G4 15 1.25 ghz Mac OS X (10.3.9)

If only five months old it is still under warranty. Take it back.

Mac OS 10.5 / I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!! I do have the OS dvd that i purchased years ago... But my computer will not start from it on its own. My

Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guys

Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;)

Photoshop CS4 will not Start

Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
Thanks in advance!!

I'd look into doing a couple of tests:
1.) Move those PAT files elsewhere
2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
3.) Reboot and see what happens.
Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
Good luck,
Hunt

CS4 will not start.

My CS4 will not start. I removed in through the control panel and reloaded. It still will not start. What should I do?

Your reference to the Control Panel sounds like you are using Windows? What I suggest is that you unistall again, and then use the Cleaning tool from this link
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Hopefully it will install and work OK after that. If not, come back, but tel us exactly what operating system you are using.

DW CS4 Will Not Start

I'm using DW CS4 and have been for many months without any problems - Version 10.0/Build 4117. All of a sudden it will not start, When I click on its icon I see the big green DW block and then a Microsoft notice saying Dreamweaver CS4 has stopped working - a problem..... and the only choice I have is to close the program. I've restarted my computer and tried again, with no success. The program sits in my Program Files/Adobe folder on my C: drive.
I badly need the program for the work I'm doing. I've added no new software to my computer lately - at least none that I know of.
Any suggestions?
Joe

Hi Thanks for this. I tried what you said the problem I have Win Vista and have installed dreamweaver cs4 Trial. I have Dreamweaver MX as well and have given up trying to use this on my vista machine. I can run CS4 on XP without any issues. Clearly this is a Vista use, but I can be alone with this problem can I?
When I try to run it It will not get past the splash screen, then reports the following.
I have tried turning off UAC and runing as Admin. Here is the error trail
Description: A problem caused this program to stop interacting with Windows.
Problem signature: Problem Event Name: AppHangB1 Application Name: Dreamweaver.exe Application Version: 10.0.0.4117 Application Timestamp: 48c874b4 Hang Signature: b4b6 Hang Type: 0 OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 5129 Additional Hang Signature 1: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 2: d4fd Additional Hang Signature 3: 044608c4cccbc38d42ab3134e57441d2 Additional Hang Signature 4: b4b6 Additional Hang Signature 5: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 6: d4fd Additional Hang Signature 7: 044608c4cccbc38d42ab3134e57441d2
REALLY hope someone can help
Martin

Will not start with hd

Insatalled a WD5000 hd in intel 21" imac 2006 worked fine for a couple of months then tried to switch on and got the Apple logo and spinning wheel. Tried to reset PRAM, starting from DVD and in Target mode - nothing. Will not respond to keyboard. Replaced old drive - no problems. Whats happened?

4 hours by bus to an Apple store.
So Original Drive(O) working Ok. but computer will not start from WD drive by usb. Got a 3.5 external case and checked WD drive using Disk Utility. After about a minute Disk Utility stops & says "disk needs repairing". Repair disk and Utility says "Ok". Run a check again and "OK" Try to start computer from WD with usb but no good so run Disc Utility again and it stops and says "disc needs repairing". Went through this process 4 times, same result.
If I try to start computer with WD pluged in by usb it will not start. I must disconnect and then it is Ok.
Got a Seagate(S) drive & copied WD using "Restore" then tried to start computer with S drive over usb. Same result as with WD, disk needs repair etc.
Don't know what I did but computer will not start from O drive now so no computer.
Drive WD & O show up Ok on a Macbookso they seem to be Ok.
HELP.

The macbook will not start.

The macbook will not start. begins with "Deng", then the initial blank screen with flashing folder and question mark. Unfortunately, the DVD player is dead. I tried with a USB external drive and the installation disk but nothing happens (keys, C, D or N). I managed to get the mouse pointer on a blank screen by holding the alt key at startup.
My impression is that the disc is filled abnormally and can no longer boot. Probably jumped the permissions. I explain: the disk was almost full. Then my wife tried to connect to a site (German) images (art history) who was struggling to load the large amount of data downloaded. At that point the machine was stopped and forcibly turned off. From the day after is no longer divided.
I have no idea how to do it again and all attempts have failed. As a last test I can try with another mac connected and with the T key pressed (target). But I ask: can I connect with a USB-USB cable?

Thank's for answer.
The internal DVD player is broken. I have an external DVD drive (USB). I have the install DVD for the OS. But the evidence that I did not have success. What evidence do you recommend? May you confirm that the USB connection is useless? We need a firewire cable crossed?

Acrobat X Pro will not start

Installed Acrobat X Pro from CS6 DVD onto Win7 computer. All other programs run fine but Acrobat will not start. Clicking on the Desktop Shortcut or in the Start Menu, nothing happens. PDF files will not open. Had Adobe Reader on the computer when I installed CS6 and that opened PDF files instead of Acrobat X Pro. I uninstalled Reader in hopes Acrobat would start, but it doesn't. Just installed the latest updates and still nothing. Tried Repair in the Uninstall program but still doesn't start. Do I need to Uninstall Acrobat X Pro and reinstall from the DVD?

Have you checked your task bar for any "invisible" windows producing any buttons there? This strikes me as a case of the license agreement being drawn invisibly/ off screen and since you never confirm itr, Acro won't start. Perhaps resetting your graphics config might help, in case you e.g. had a 2 monito setup, but removed one of the monitors. Otehr than that this could be anything from UAC to security tools blocking stuff.... We realyl cannot know and a reinstall likely won't fix that particular issue, either.
Mylenium

My cd and dvd will not play

my cd and dvd will not play

Ah, I'm sorry! I think I misunderstood your second post. Open the Start Menu and click "Computer." A window should open that shows the drives in your computer. Is one of the icons your DVD drive? What drive letter is it? Is the the D: drive?
Put a disc in the computer. Tell me a little about the disc. Is it a CD or a DVD? Is it a retail version of something or is it a homemade, recorded disc? Is it computer data (such as an application, game, or documents), a music CD, or a movie?
Once the disc is in the computer, right-click on the disc drive in the Computer window we opened and select "Open." What happens?
- Peter

CS4 DVD will not start

Similar Messages

Maybe you are looking for