CS4 Error on Lauch cannot load CKJGRID.RPLN

receiving error Cannot load the CKJGRID.RPLN plug-in. It is dependent ont he PRINT.RPLN plug-in, which failed to load. Please check documentation for the PRINT.RPLN plug-in."
Please help. I used my ID CS4 last week without a problem. I have un-re-installed and still receive the same message. Adobe told me they do not support CS4 any longer. I work for a non-profit, we will not be upgrading this year for sure! I can open the same document on someone else's machine, when it is available for me to use. thank you.

Thanks so much. I will try the cleaner tool.
God Bless!
Exciting Central Tampa Baptist Church
Dr. Jeffery L. Singletary, Pastor
t: (813) 226-2923/f: (813) 226-0121
web: [email protected]

Similar Messages

I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point

I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point

reinstall ID. The update was not successful.

Solaris java sapgui error JniAgiLibAdaptor. init : Cannot load JNI library

i have a problem java sapgui.
Launch the Sapgui and then try to connect to any one of the three choices and it should produce the following error.
i am running this on a Solaris 10 32bit. This sam java SAPGUI runs fine when i boot into the windows xp pro. Hope this helps.
gui version;
SAPGUI for Java 7.10 rev 8 (java),
no library (lib)
(Version ID 071000040800)
Mon Mar 30 10:34:24 MEST 2009
uw1059, 710_REL, 1054563
Java VM: Sun Microsystems Inc. Version 1.6.0_14
OS: SunOS(x86) Version 5.10
The version of Java being used is:
java -version
java version "1.5.0_16"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_16-b02)
Java HotSpot(TM) Client VM (build 1.5.0_16-b02, mixed mode, sharing)
Thank You,
Ferhan
JniAgiLibAdaptor.<init>: Cannot load JNI library
details;
java.lang.Exception: JniAgiLibAdaptor.<init>: Cannot load JNI library
at: com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:29)
at: com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:283)
at: com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:297)
at: com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:798)
at: com.sap.platin.base.logon.GuiLogonFrame.doConnect(GuiLogonFrame.java:838)
at: com.sap.platin.base.logon.GuiLogonFrame$SymListener.actionPerformed(GuiLogonFrame.java:443)
at: javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at: javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at: javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at: javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at: javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at: java.awt.Component.processMouseEvent(Unknown Source)
at: javax.swing.JComponent.processMouseEvent(Unknown Source)
at: java.awt.Component.processEvent(Unknown Source)
at: java.awt.Container.processEvent(Unknown Source)
at: java.awt.Component.dispatchEventImpl(Unknown Source)
at: java.awt.Container.dispatchEventImpl(Unknown Source)
at: java.awt.Component.dispatchEvent(Unknown Source)
at: java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at: java.awt.LightweightDispatcher.proc
Attempt to load shared library
/opt/SAPClients/SAPGUI7.10rev8/bin/libJPlatin.so failed.
The library file exists, so either the program has
insufficient privileges to access the library or the library
is not loadable by the shared object loader.
Please recheck the system requirements for your operating
system and make sure all required libraries are installed.
details;
ava.lang.UnsatisfiedLinkError: /opt/SAPClients/SAPGUI7.10rev8/bin/libJPlatin.so: ld.so.1: java: fatal: /opt/SAPClients/SAPGUI7.10rev8/bin/libJPlatin.so: wrong ELF data format: ELFDATA2MSB (Possible cause: endianness mismatch)
at: java.lang.ClassLoader$NativeLibrary.load(Native Method)
at: java.lang.ClassLoader.loadLibrary0(Unknown Source)
at: java.lang.ClassLoader.loadLibrary(Unknown Source)
at: java.lang.Runtime.load0(Unknown Source)
at: java.lang.System.load(Unknown Source)
at: com.sap.platin.r3.util.GuiJniLoader.loadPlatinLibrary(GuiJniLoader.java:56)
at: com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:27)
at: com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:283)
at: com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:297)
at: com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:798)
at: com.sap.platin.base.logon.GuiLogonFrame.doConnect(GuiLogonFrame.java:838)
at: com.sap.platin.base.logon.GuiLogonFrame$SymListener.actionPerformed(GuiLogonFrame.java:443)
at: javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at: javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at: javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at: javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at: javax.swing.plaf.basic.BasicB

Hello Ferhan,
the output of the AboutBox is indicating that you are trying to run SAP GUI for Java on Solaris 10 with x86 CPU. Unfortunately, the library required to be loaded is complied for SPARC. Please have a look at the system requirements part of the manual coming with the installer of SAP GUI for Java or [note 959236|https://service.sap.com/sap/support/notes/959236].
Best regards
Rolf-Martin

Error message: content cannot load, try again later

I keep getting an error message that content cannot be downloaded. I rented a movie and it wont load. I can see tv shows that I purchase, the wifi connection is good and I have already troubleshot the HDMI issue. Disconnected HDMI cables, removed the electricity from tv then apple tv etc. No luck. The movie will not download. Anybody experiencing this issue? My ATV was working perfectly until I ''updated'' the software!! I am thinking of reverting to factory defaults. Frustrated as **** about this. If anyone has any suggestions, please share.

Welcome to the Apple Community.
Try unplugging the Apple TV for a few moments and trying again.
Sometimes if the download speed is too slow the Apple TV won't download, try checking your internet speed using speedtest.net

HT1551 When I go to NetFlix, it opens to all the shows, but when I presss play, it comes up with an error saying it cannot load, try later. This continues everytime on NetFlix

Why does NetFlix not play on Apple TV when I click on the feature I want to watch? Why does it alway come up as an error, not loading, try later?

Do this: http://appletv2.com/fix-netflix-apple-tv/

Error Assigning SID-cannot load data in ods

Hi
I have data in ODS coming from R/3.
Uptil today data was loading and working fine.
When i tried to load the data today, i am getting an error. Data is in PSA
Data is also seems to be in ods, because the request is in red color, but reporting icon is still available.
and Datamart status is empty.
I checked the call log and found the following error.
Overview of Call log is as follows
Activation of Data
SID Generation
Data package 3 : Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DATEFROM
Value '01012009' of characteristic 0DATE is not plausible
Data package 6: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DATETO
Value '31122009' of characteristic 0DATE is not plausible 1
Rest all packages for the various infoobjects are loaded successfully
I think there is a problem in data, but i dont know how to resolve the issue
please help
Regards

Hi,
The problem that you are facing is that your format is YYYYMMDD and you are trying to load data in format DDMMYYYY.
The error is the current request, you dont need to touch anything else. As i said earlier, goto the RSMO transaction, find your failed load. Click on it. On the right side of your screen, you will get the individual monitor, which has a status tab. On this tab, there would be a button which says error message. Click on it.
It will give you several messages. If you scroll to the right, there would be a ? symbol for long text. Click on it.
This will give you further info. One of these messages will have the record no and package no. You need to check all messages. Then go to your PSA, to the same package and record and check the date format
Another way is to goto SE16-> find the active table of your DSO, it will be named as /BIC/A<DSO NAME>40
Search the respective date field for the value thrown in the error, or you can use the record no obtained from above to find the value. Find the key fields and note them down.
You then need to delete the incorrect request from your DSO. You can then correct the incorrect record in your PSA ,using the key fields,save and reconstruct this request.
Hope this helps.
Regards.

Error message: Cannot load the rpt file

Can anyone please help.
I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
1: Cannot load the rpt file
2: Object reference not set to an instance of an object
3: Invalid report file path
I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
Does anyone have any ideas to solving this?
Thanks
Tony

Hi Tony,
On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found.

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Error on opening repository (cannot load class)

Hi,
Whenever i try to open repository (or directory) from the tools page i get an error report saying:
"Cannot load class sun/plugin/javaruntime.
The bridge was installed at <C:\progra~1\java\jre15.0_0> but the class is no there.
Modify the registry key (HKEY_LOCAL_MACHINE\Software\javasoft\jave Plug-in) to reflect the new bridge lcoation OR change your CLASSPATH to include the new directory."
If i click the message away the repository will still start up, it just takes a bit longer.
I'd still like to get rid of this pop-up though, but am not sure what has changed for this now to happen, nor am I sure how to modify the system in the proper way.
Help be appreciated
Robert

Hi all
I looked up the jdk 1.4.2 at sun.jave.com.
I can still download this version, but it's pretty outdated, and has actually reached its end-of lifecycle as per October 30 2008, which is almost 2 months ago.
I wonder if it would be a good idea to still install this version, and also ask myself the question whether this would be an approach that SAP itself would advise, nor indeed if they havent come up with a different approach?
Any ideas about this?

Publishing error - cannot load .XLM file

I have Adobe Presenter 7.0 and have tried to publish a presentation. I receive an error that Presenter cannot load .XLM file. No filename is specified. Any ideas?

1) Please verify that the mfc42*.dll's on your machine are version 6.xxx.xxxx
2) Please verify that the sqora32, sqresus, and sqoras32 DLL's are in your %Oracle_home%\bin directory and that that directory appears in your path.
3) Please verify that you are using the proper version of the ODBC driver (i.e. 8.1.5.10 on an 8.1.5 system, 8.1.6.3 on an 8.1.6 system, etc.).
Justin
null

I also am having problems creating cd cover. When I try to print onlt text comes out picture art is 1 big black square. cannot load library error shows up 126. Do anyone have a solution for this problem?

Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?

One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008

Cannot load required classes for service SLD Data supplier

Hello Experts,
I am trying to use the SLD Data supplier service from visual administartor for registering my DEV EP 7.0 engine in central SLD.When am trying to access that particular service from visual admin,it is throwing an error saying that:"Cannot load required classes for SLD Data Supplier service and please refer the not for resolution Note No:1017526.
My NW EP 7.0 is at SP17 level and as per the above note all settings are fine and the relevant application is also started well.
Please suggest us for any possible solution.
Thanks&Regards,
Apparao S.

> You can also try the following: Move sldserv.jar from
> /usr/sap/<SID>/<InstID>/j2ee/cluster/server0/bin/services/sld/
> to
> /usr/sap/<SID>/<InstID>/j2ee/admin/lib/
Hi Desiree,
Thanks, worked for me too.
Only in my case, when I moved the file, the sld data provider service did not start at all after reboot of the instance.
Also, the sap.com/tcsldwd~main application refused to start.
I then copied the file back, this time maintaining an entry in both locations and reboot the instance. Everything started working after I reboot the instance. The error also disappeared and I was able to change the SLDuser password.
Thanks
Prasad

XSQL-022: Cannot load serializer class oracle.xml.xsql.serializers.fop203

Hi,
I' have used Tomcat 4.0.3 with XSQL Servlet 9.2 for about a half year. All is working fine. When I now change to 4.1.18 the most things are also working fine. The are to problems:
1. I have to save the XSQLConfig.xml in a jar file.
2. My fop serializer doesn't work any longer. I'm getting all the time the following error: XSQL-022: Cannot load serializer class oracle.xml.xsql.serializers.fop203.
I'm using the XDK 9.2.0.4 with jsdk 1.4.1 and tomcat 4.1.18 on Redhat Linux.
Has anyone had have the same problem? Has anyone a solution for this problem?
Regards
Uwe

Does the XSQLSampleSerializer exhibit the same problem?
That is, can we rule out the fact that it's related at all to FOP?
If you browse the following page, does it work?
<?xml version="1.0"?>
<?xml-stylesheet serializer="java:oracle.xml.xsql.serializers.XSQLSampleSerializer"?>
<foo-with-java/>This sample serializer should be in your xsqlserializers.jar file.

FRY-00001 Cannot Load Library iamodapp.so: iamodapp.so: cannot open shared

I am installing SAP running on top of an Oracle 10g database in a Red Hat Linux 4 . My database is up and solid. However, during the post Oracle DB installation scripts, I am bombing out with the following error:
FRY-00001 Cannot Load Library iamodapp.so: iamodapp.so: cannot open shared object file: No such file or directory
Anyone else have this problem and found a solution?
Thanks & regards
Arun Singh

Hi Arun,
1. Copy the installation media dvd to a directory on a files system
2. change directories into the sub-directory which contains the executable (sapinst)
3. run the command sapinst -extract
4. It will unpack the missing libraries into the same directory where you executed the command..
5. I copied these libraries to /oracle/<SID>/102_32/lib
6. Stop and restart the installation
Hope this helps.

Verify installation of MS C Runtime Library - Cannot load JNI library

Hello,
I´am working on a MS XP frontend on customer side and have no admin rights, installed is SAPGUI for Java 7.10rev4 with sun java version 1.5.0_11
The admin from the customer told me that he had completly installed the MS C Runtime Library VS2005 SP1, file vcredist_x86.msi.
However, if I try to use the JAVA Gui I found in the trace file the following error:
29.07. 10:25:16.039 CON: new GuiNiNetConnection
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ERROR #############################
29.07. 10:25:16.055 ERROR: GuiConnection: Connection failed
29.07. 10:25:16.055 ERROR: JniAgiLibAdaptor.: Cannot load JNI library
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ERROR #############################
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.2. ERROR #############################
29.07. 10:25:16.055 ERROR: JniAgiLibAdaptor.: Cannot load JNI library
29.07. 10:25:16.055 ERROR: Technical Details
29.07. 10:25:16.055 ERROR: java.lang.Exception: JniAgiLibAdaptor.: Cannot load JNI library
29.07. 10:25:16.055 ERROR: at: com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init
In an old posted message I found the information that the reason should be that the MS C Runtime Library is not installed.
- Is there a simple way to check if the vcredist_x86.msi is installed in a correct and completed way?
- Any other ideas about the error "Cannot load JNI library" on a windows XP system?
Thanks in advance,
Stefan

Hi szgyurka!
I have an article here that can help you troubleshoot this issue with your iTunes application:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

CS4 Error on Lauch cannot load CKJGRID.RPLN

Similar Messages

Maybe you are looking for