CS4: Exporting "lightweight" AVI with chapter marks?

Prior to CS4, I recall being able to export a "lightweight" AVI file using black video filler and the "Expand Stills" option that would contain chapter marks. You could import this AVI into Encore, where the chapter marks would be recognized, and then use the "Replace Asset" option to replace the AVI with an M2V encoded in a different encoder. This worked great--but I can't seem to get it to work any more. I'm guessing that whatever enabled this feature was forcibly extracted when the Media Encoder went solo, but if not--how the heck do I do this?

Don't see anything like that in CS3.  Closest thing to it is this:   Export / movie / settings / compile settings ....

Similar Messages

  • Export with chapter marker to iDVD

    Ok something has slipped from my memory.
    I'm trying to create a DVD of my recent project. I created 12 chapter markers with the first being 00:00:15:01 into it. I exported it to Quicktime movie (not conversion) I selected add Audio and Video and include Chapter Markers. I made it not self contained. But no chapters appeared in iDVD? I tried including All Markers and also tried including Studio Pro markers without success.
    Any suggestions?
    John

    I've exported a sequence with chapter markers using Quicktime conversion and all the chapter markers show up except for the last one. Looking back at the original sequence in FCE, this last chapter marker is the only one that is a pink marker on the clip rather than a green marker on the timeline. I've tried several times to delete this chapter marker and re-create it. Each time, it reappears as a pink marker tied to the clip. Is there a way to force it into the timeline? The only difference between this chapter marker and the others is this one is located at the beginning of the credits at the end of a movie which were created using the Boris plug-in for a scrolling title. All the others appear correctly in the timeline were tied to normal video clips.
    Would the fact that I'm creating a chapter marker in the part of the sequence created using the plug-in cause the marker to behave differently?

  • Exporting 16:9 with chapter markers to idvd

    I have been triyng to export a video in 16:9 with chapter markers but when opened with idvd I can only get either the format or the chapters by using two diferent procedures. Is there any way I can have it in the right format and with the chapter markers? If not, is there any other program, lets say dvd studio pro, that can do it. How should I export them?
    Thank you all for your help.

    Hi
    Got problem with Chapters too - It was my own fault.
    A. Must Use Chapter Marks - not just only Marks
    B. Must NOT - fiddle with the text in this box set - I thought me to be clever by renaming as I wanted them to be - Result = No Chapter Marks.
    Do the re-naming in iDVD - here it's OK and works.
    C. The export over to iDVD Export as
    • EXPORT With Chapter Marks
    • Not self-containing - not important but saves Time and Space
    • QuickTime movie - NO QUICKTIME CONVERSION - AT ALL ! !
    D. This file I import (drop) into a BRAND NEW iDVD Project - Never go back to update as this set's off the iDVD BUG. If error in movie found and need of change - THEN Start a Brand New iDVD project and all will be well.
    (E. Never let iDVD convert from NTCS to PAL or other way around and not feed it 24fps video - as result will be BAD) - If of need - Please come back for instr. on how.
    Yours Bengt W

  • MPEG2 or MP4 with chapter marker export for playing back on TV.

    Is it possible to export a project from Adobe premiere pro to MPEG2 or MP4 format with chapter markers information for playing back on a TV via usb conection?

    It is not.  But the following program can create MP4 files with them.
    http://www.videohelp.com/tools/XMedia-Recode
    Whether or not the TV will read them is another matter.

  • Quicktime to .flv with chapter marks - possible?

    I want to export from FCP via quicktime conversion then convert the QT files to .flv files using flash encoder but i want to keep my QT chapter marks within the .flv file so that the viewer can jump to each chapter - is this possible?

    The markers actually show up when I playback on Quicktime X. I tried Make Movie again from Premiere to a Quicktime movie with DV25 codec (HUGE file size since it's not H.264), and the markers actually work right. What gives?

  • Just duplicate QT movie with chapter marker dropdown!

    Hi,
    This should be simple . . . very simple . . . but I don't think iDVD will do it? I have a QuickTime movie - shot with the HVX200, overcranked - stunning video with numerous chapter markers created in Final Cut Pro exported as a self contained movie. I love the way you can click the little window at the lower right side of the QT player, and the chapter markers just drop drown so you can choose which one you 'd like to see.
    I'd like to create a DVD of exactly that . . . what looks like a QuickTime player where I just click the little play triangle, and it plays. To see chapter markers, just click the little number (chapter marker) at the bottom of the screen - and voila - the chapter marker dropdown comes down. Is there a way iDVD twill let the quicktime movie look exactly like . . . the quicktime movie? No menus, no special screens - just the QT player window and movie in it !
    Can this be done? Thanks very much for considering. (I also posted this on the DVD Studio Pro board, just in case that'll do it?)
    Larry
    Thanks

    I started to answer a while back and safari crashed so I gave up.
    There's no way to get Keynote to see the chapters, but to answer your other question...
    try this:
    http://www.feelorium.com/
    I think their Textation app lets you add chapter tracks.
    I usually use Final Cut Pro to make chapters, then once I've run my final DV movie through compression those get stripped out. A few simple steps and you can graft the chapter file from your original DV file into the web versions (we do this every week at my church).

  • Export to avi with the same quality. How ?!

    Hello,
    I'm using Adobe Premiere Pro CS5 to edit my video but i don't know how to export to avi file with the same quality...?!
    In the previous version Premiere Pro CS3 i can export the video into avi with the same quality using Windows Media Video 9 Codec but in Premiere Pro CS5 i don't know how to do it...!!
    Best Regards,
    Q8Xbox

    After you have downloaded and installed Lagarith and UT, reboot and just choose to Export to MS AVI, and then in the Compressor drop-down, choose the one that you want.
    Good luck,
    Hunt
    I am agree with you Bill but how can we import these codecs into adobe premiere pro.Because it expects only .epr extension for importing presets.Is there any other way then let me know.Thanks in advance

  • Help with chapter/marker issue, please

    Using DVDSPRO 2.0.5.
    One track, 58 mins of movie.
    Have set five chapter markers and buttons, plus one 'Play Whole Movie' button.
    Playback via 'Play Whole Movie' button results in playback of Whole Movie track stopping at the end of each chapter and jumping back to Main Menu.
    It did not do this playback jump-back on my set-top box, but it DID do it on a client's player. Oh dear.
    What am I doing wrong? Why won't the Main Movie Track play straight through (i.e. ignore) each marker and continue to the absolute end, i.e. minute 58?
    (End Jump of Whole Movie track is set to Main Menu.)
    Can this only be avoided by using Stories, and telling the Main Track that it must play through without stopping at the Chapter Markers?
    G4 Quicksilver 860 Mhz Mac OS X (10.3.9) FCP 4.5 HD

    My own solution:
    Create a second 'Whole Movie' track with the same Whole Movie asset. This Track is connected to the Play Whole Movie Button. The track has NO Chapter Markers. It of course jumps back to Main menu at its end,
    The original 'Whole Movie' track with Chapter Markers is re-named to 'Story Track'. The Chapter Buttons are connected to this markers on track.
    Might this fix the problem for EVERY SET-TOP BOX?
    SDG

  • CS4 export to.flv with Alpha dimensions problem?

    Hi-
    I am exporting an actress from a greenscreen shoot (original file 1920x1080p) That I want to put on a webpage.
    She is keyed well and I have got to the export stage.
    I have exported to flv. with alpha at various 16;9 dimensions (640x480etc) and that all works fine in Flash.
    However, the actress is in the middle of the frame and the transparency is all around. Can I make the window size square? 360x360?
    Therefor, cutting out some of the 'transparent' space either size and then ending up with a 360x360 file?
    thanks
    scott

    Scott,
    I do not have CS4, but believe that you can Crop your Export with FLV and the positioning should be centered. Remember, this is an assumption on my part.
    Good luck,
    Hunt

  • How do I export in avi with square pixels?

    At present I can only export in avi without my computer shutting down as I need more power. YouTube has become very unhelpful since Google took over and my widescreen exports don't load properly. There used to be a buttong to fix it but that's gone.
    I also used to have a tic box for square pixels, how do I select this on CS5.5?

    In the 'Video' tab of export settings scroll down until you find 'Aspect' field:

  • .MOV exported to .AVI with QTpro fails to play in Windows Media Player

    I have a .MOV file that I converted with 7.1.6 of QTpro to a .AVI ( DV/DVCPRO - NTSC / Best / 4:3 ) ( uncompressed 48kHz / 16bit / 2 channel ). The converted .AVI file will not play in Windows Media Player or load in Premiere. The converted .AVI will play in QT. I have previously converted .DV files to .AVI without any problems. If I load the converted .AVI with VirtualDub it says there is a missing "index" and precedes to read the entire .AVI file to "re-create" the "index".
    Can anybody offer any clues as to what is going wrong?

    Are you referring to a Lynda.com Compressor tutorial or one of their many PPT tutorials.
    I agree that 10 Mbs is a nice general quality level – depending on your footage, of course – the content, the lighting, etc. WMV is probably the safest – although MP4 should be good as well,
    Hard to be more specific except to say, Test. A preset that works well for one movie may look not-so-great applied to another.
    Take a short, representative section and encode. Project the output file and see what you think.
    Good luck.
    Russ

  • Exporting to pdf with page marks and color separations

    Hi All.,
    I have a requirement to export the current document as PDF file. I am using the export provider with the service registry to export the document as pdf file. The code works successfully. Now I have a requirement where I need to save the pdf with color separations and page marks. First I need some information on what does page marks and color separations actually mean for a pdf file. And second I need to know how this could be achieved. Do I have to set some preferences? I have tried setting preference for color , bleed and it works. But I am not sure whether this satisfies the requirement. I would be thankful if someone would suggest me on the same.
    Thanks in Advance
    Vishnu

    Hi,
    In my experienced it cant, you can export it to pdf but you dont have the ability to make it fillable, unless doing it manually, from the exported pdf, install an Adobe Professional software to have capability to save data's.
    Regards,
    Clint

  • CS4 Exporting widescreen AVI or Quicktime problems...

    Hi.
    Ive been pulling my hair out with this one for a long time and can't seem to get anywhere with it despite searching the net for an anwer that works for me.
    I simply want to export a short video as a PAL widescreen AVI or Quicktime movie, I really don't mind which.
    My problem is that no matter what settings I try, the video either comes out slightly stretched with black bars to the left and right (below left) or reduced in size rather than fullscreen (below right).
    The images below are from VLC player set to fullscreen viewing. I thought it might be an isue with VLC but I get the same problem when I try it with Quicktime player and when I uploaded the final video to the net...  http://www.youtube.com/watch?v=4RZuhsrM6tY
    The settings that got me the above results are:
    Format: Microsoft AVI or Quicktime
    Preset: Pal DV Widescreen
    Codec: DV Pal or H.264
    Width and Height: 720 x 576 (greyed out and locked, unless using H.264 Codec)
    I've tried interprating my footage to conform to the pixel aspect ratio of  D1/DV PAL Widescrren 16:9 (1:4587)  which helped  but the image is still not fullscreen if you see what I mean?
    If anyone can tell me what settings I should be using I would be eternally greatful because I'm going to lose my mind if I don't figure it out soon. Surely it can't be that difficult or unusual export format!?
    Thanks for any help anyone can offer.
    Stuart.

    Jim Simon wrote:
    The problem is with the players.  You need to tell them to unsquish the video manually.  They don't do it automatically.
    YouTube needs a square pixel export.  You would not use this export for upload to YouTube.  You'd export a separate file specifically for that.
    how do I manually tell the players to do that?
    I am struggling with the same issue: DV PAL is always 4:3  720x576 - so where does the "PAL DV Widescreen" export setting (PAR parameter) come into play?
    DV PAL 720x576 16:9 letterbox source footage was captured at PAR 1.0940
    sequence is same PAR
    what should be my export settings for:
    1. creating a file to be displayed correctly on a flat screen TV monitor using a DVD standard player
    2. creating a file to be  displayed correctly on a computer monitor using a Windows OS / players
    3. creating a file to be uploaded on youtube (I got that exported and uploaded and  displayed alright by tagging it yt:crop=16:9). I think I exported it as Sq pixel PAR
    4. Encore settings for creating a DVD with these videos to be  displayed on both TV monitor and PC monitor.
    All  export settings I tested the file with produced a lightly 'fattened' image when played back on my mac using QT, exept the Sq pixel export which looks perfect on my mac. No Sq pixel exported files show in QT player Info window: "720x576 (788x576)" - why is that?
    Thank you

  • InDesign CS4 - Exporting Email addresses with "_"

    I have an Email address in my inDesign document that is the format:   [email protected]
    When I export this document, what I get in Acroread is mailto:[email protected]
    How do I get the complete email adress to showup as the mailto:  in my PDF file?
    dave

    It's not you, it's Acrobat. The detect links feature was broken in Acrobat 8, I think. Not sure if the bug was ever fixed. Try an Acrobat forum search and a Google search for Acrobat detect links and similar terms.
    HTH
    Regards,
    Peter Gold
    KnowHow ProServices

  • Exporting QT with Chapter markers for iDVD

    When I export a QT with Chapter markers for iDVD I get one movie file then a number of "AV" files - what are these and what do I do with them?
    workflow as follows:
    1.Place chapter markers in timeline using mm the Add Chapter Markers
    2. set in/out points in timeline
    3. export quicktime movie
    4. select include Chapter Markers and include audio/video
    5. do NOT select recompress all frames
    6. DO select make self contained movie.
    7. Open exported movie file in Quicktime and chapter markers are present
    8. import ONLY the movie file to iDVD (NOT the AV files?) and answer yes to read all chapter markers
    9. burn seems to work fine but when I playback on DVD player there is digital stuttering in the picture
    Any ideas on how to remedy the problem?
    thanks in advance
    patrick

    The project is only 75 minutes. Do think it is the codec that iDVD is using that is causing the stutter. I assumed that it always encodes using MPG2.
    Any idea what the AV files are?
    When I export as an uncompressed DV stream the file is 15 GB.
    When I export as uncompressed QT I get one file (movie) at 2.5 GB then
    5 more "AV" files that are each 2.5 as well. So when I import the movie file without the AV files am I missing something?
    Should I look into DVD Studio Pro? I have version 1.5 but I am fairly unfamiliar with it.

Maybe you are looking for

  • How to download Adobe Premiere Pro CS6 6.0 MLP AOO

    I have the licensee, and deactivated the software, but cannot find the install file in my computer...  how can i I get the download link  pls?

  • Sharing calenders on one computer

    My wife and I share a mac via Fast User Switching where I am the administrator. However, there doesn't appear a way for us to share our iCal information. We don't need to be able to write to the shared calenders (however, that would be nice). Is ther

  • Account Search by Territory ID

    Hi, I have set up rule builder where one of the rule is account id. i have manually enter account ID in rule and activated . if i search that account id in territory search the node is showing in the result. but if i search the Account by territory i

  • Passing variable from javascript to servlet!!!

    Hi all, I have one doubt, can we pass a variable from javascript to servlet??? In Brief, i am getting some values in javascript through jsp and the same values i want to use in servlet. Yes, i know i can get these values in servlet by using request.g

  • Unfortunately contacts has stopped

    Hello, Since my phone has updated to the new OS, I have constantly sent he error message 'unfortunately contacts has stopped'  can you please advise how to fix this? Thanks