CS4 File Corruptions

Hi All,
I am running a new Macbook Pro 15" 2.4 GHz Intel Core 2 Duo with 4 GB of memory with OS X 10.5.7. And I also have a dell 24" monitor hooked up as my main screen. Twice now in the past week or so photoshop has locked up, and I was forced to do a hard restart. Both times NO files were even open in Photoshop. Upon doing this, the last file that photoshop had open gets completely ruined. And only that file. No other photoshop files are touched on my entire system. Twice now I have lost several days worth of work this way. The second time I was even saving several different versions of the file as I worked along in case one got corrupted. Tell me how in the world I can work on the file for several days with no problems opening and closing it and even saving versions of it, and once I have to do a hard restart ALL of those files, and ONLY those files get ruined?????? I have been running this setup for a few months now and have had no problems in the past. Could one of the new photoshop or apple updates have screwed my system up?
PLEASE PLEASE PLEASE help me figure this one out. I am two weeks behind in my art project because of this issue. Why on earth does it only affect those particular ones? And only on a hard restart even with no files open?

Ok,
So I ran a complete disk utilities scan of my system and hardware check. All the hardware is fine. I also repaired all disk permissions. But to really be on the safe side, I completely uninstalled ALL adobe products and completely cleared out all preferences and anything related to adobe from my system. I then reinstalled PS CS4, BUT I chose not to run the update for it. So let's see what happens now. I will keep you all posted.

Similar Messages

File corrupt in CS4

We're just getting started in InDesign CS4. We've been editing a file for a few days. It has over 300 pages in it, all the text in a single story. We reached a point where making the next correction caused the file to hang up for a very long time (more than 5 minutes). When we force-quit InDesign and re-opened the file, the correction had not been made, any further changes have caused the same behavior.
Plus, the text frames no longer seem to be threaded properly. InDesign added a bunch of blank pages to accommodate the remaining text, and then the pages that formerly held that text are tacked onto the end, but their text frames are no longer threaded to the main story (like they were before the crash).
I followed the guidelines for saving down into IDML format and re-opening. This seemed to stabilize the file. We can now edit it without the rainbow wheel of death. We'll still need to re-thread all those pages by hand, but that's not too bad.
My question is: What might of caused this and how can we keep it from happening again? Will all our CS4 files be prone to this unpredictable corruption?
We're running Mac OS X version 10.4.11

If we knew that we'd be $$$gibillionairres$$$
These things happen, not only with InDesign files but with a lot of computer files.
One thing that can fubar things up rightly is the program quitting during the save. Sometimes you don't realise it closed before the save finished or something, and that can rightly screw up files.
It's always good to back up your files daily and save save save. Try doing a Save As every hour or so to a new file name and continue working from there.

CS5 corrupts CS4 files

Sorry, I'm sure this has been covered but I cannot find it.
I have CS5 updated to 11.0.2.489
When I open CS4 files, save them as CS5, close, open the CS5 file, some of the folders are corrupt. This is not one file, this is all my files. I also cannot copy from one fla into another. The movie clip will come over but it will be empty.
I have seen the blog posts about how to fix a corrupted file, but it's indepth and time consuming. I do not want to do this to hundreds of my files. Please advise on a fix.
Thank you.

Found the case of this corruption.
It appears in CS5 that you can't name folder libraries the same way. In the past I've numbered off directories (1) or [1] Description.. something to that effect. Those directories will in effect duplicate to a new gibberish named directory and the original will appear empty. Because of this the stage will also appear empty. Even creating a new folder in CS5 will the bad naming convention, then creating a new movie clip into that folder will imediatly cause a duplicate object conflict.
I'm not sure if it's the { ( or space...I'm just seating away from that naming all together.
but:
1_Folder
Works just fine.

Is there a cure for persistent file corruptions across the suite?

i am having terrible and consistent problems with file corruptions across the suite. for example…
1: i collected for output (indesign) – corrupted over 100 small images that were linked.
2: opened an indesign job and all linked files failed to update and could not be imported (simply would not import those files and were all corrupted).
3: had a hang in photoshop followed by a 150:30 error (would not open any of my applications). this prompted a clean install of system and adobe cs4 see below
4: most recently, had a hang in photoshop (photoshop will also no "force quit") whilst indesign was open. two of my image files corrupted and, most surprisingly, all my illustrator files that i had placed also corrupted (will not even open in illustrator any more). illustrator was not even running at the time, so, get this – a hang in photoshop destroys illustrator files simply because they are placed in indesign.
this last event has made me more certain than ever that there is a fundamental problem at the cs4 core.
can anyone help?
please note the following:
i am running a macintosh imac, 2.66 GHz Intel Core 2 Duo (latest imac), with 4 GB 1067 MHz DDR3 ram.
before this last disaster, i had reloaded the system software (archive and install), and updated it all the way to version 10.5.8
i then uninstalled the creative suite, ran the cleanscript from adobe, reloaded the creative suite, downloaded all the cs4 updates
(so, latest mac, latest system, latest cs4 – all clean installs).
is there something i can do? or is this just a very unstable and disappointing upgrade – i have had nothing but problems from day one!
many thanks if anyone has any advice.

Re: 150:30 error:
Please try this KB article's solutions, and report back on how it went for you. If you can provide details about any recent OS updates, backups, or migrations, that would help is nail down the root cause of the new rash of this error for Mac users recently:
http://kb2.adobe.com/cps/512/cpsid_51260.html

Two separate versions of the same file corrupted in different ways...

I was working on a Photoshop CS4 file last night that was created in CS4 and has only been opened on this machine in CS4. I saved the file and closed Photoshop. When I open the file today, all my layers are gone, flattened into one Background layer, and the image looks like colored TV static. On top of that, the separate, older version of this file with a different name (created earlier in the week on the same machine in the same CS4) will not open at all - I get the error message, "Could not complete your request because the file is empty" and the file size has mysteriously shrunk to 76 KB from 20+ MB. What happened?! I'm guessing these files are corrupted beyond recovery, but why and how did this happen? Has anyone had this or a similar problem? I want to know how to prevent this from happening in the future. Please help! Thank you. =)

Thanks for the suggestion, Chris.
Same issue, new question - don't ask me why I did this, but while both Photoshop and the now corrupted file were open, I changed the name of the folder containing the file, then continued to save the open version of the file without first closing it and reopening it from the newly renamed folder. Could this have caused both files in that folder to become corrupted in different ways? The other file that gives me the "file is empty" error was not open at the time, but it was in that folder. I'm thinking maybe by changing the path to the files while Photoshop was running, that could have triggered this. ?? I have 3 1TB internal drives raided to read as 1 drive, so I'm really hoping that one of these disks is not dying on me as you suggested. I was also backing up an external drive using BackBlaze when this all occurred - any possible connection? How can I find out if one of my three raided drives (and which one) might be going bad?
Thanks!!

File corruption with a very large .ai file

A little background first:
I am a graphic designer/cartographer with 15+ years of experience. I started making maps in Illustrator with version 6 and have upgraded to every version since.
My machines:
2x Mac Pro 8-core 3.0GHz, 16GB RAM, 10.5.7
Mac Pro quad-core 2.66GHz, 8GB RAM, 10.5.7
MacBook Pro 2.0GHz, 2GB RAM, 10.5.7
Illustrator specs:
All machines have CS4 installed as well as Illustrator 10.
The 8-core MPs have the MAPublisher Plug-ins installed
The 4-core and MacBook Pro (MBP) does not have the MAPublisher Plug-ins
The problem I am having can be replicated on each of the machines. The MBP can't handle the file due to RAM. Since this occurs on machines that has MAPublisher installed and a machine that does not, I think we can rule out a plug-in issue.
File specs:
The original file: version 10, file size (uncompressed, no PDF support, and no font-embedding) is 36.4 MB. There are no raster effects or embedded/placed images. This is strictly a vector file. Artboard Dimensions: 85.288 in x 81.042 in
The original file, converted with CS4, and then saved as a CS4 file: file size (uncompressed, no PDF support, and no font-embedding) is 97.9 MB.
Brief Description of the problem:
I have tried to convert this file into every version of CS and it has failed every time. With each version, it has resulted in an unusable file for different reasons. CS-CS3, the file was completely unusable because of the opening/saving time. It could take as long as 3 hours to save the file. With CS4, this has been rectified and I once again tried to convert it. Upon re-opening of the 'converted' CS4 native file, the file is 'corrupted'.
The file corruption is not your regular "This file can't be opened because of: X" corruption. The file opens after a save/close just fine. It is just that parts of the file gets destroyed. To save space in this post, I have created a webpage that illustrates the problem that I am having:
http://newatlas.com/ai_problem/
I have tried everything possible to make the file smaller and it is as slimmed down as I can make it. (Using symbols, styles, etc.) I have also tried to eliminate this as a font problem by replacing every font with an Adobe supplied font, cleared caches, etc. This does not work, so I think we can rule out a font issue. I have also reduced this file to contain no pattern fills, no gradients, and just used simple fills and strokes. All to no avail. I have also tried piecing the file back together into a new document by copying/pasting a layer at a time. Saving, closing and re-opening after each paste cycle. I can get about 95% of it put back together and then it will manifest the problem. The only thing I haven't done is to convert all of the type to outlines. This would not solve my problem since this is a map that I continually work on year after year. I also can't remove objects or cut the overall area of the map because this file is used to produce an atlas book, a wall map and custom boundary wall maps. You can view the entire file at:
http://okc.cocpub.com
If I do not convert the legacy text, the file saves/closes/re-opens just fine. It just takes a very long time. So this leads me to think that the cause of the problem is the number of editable type objects that this file has. Ever since Adobe changed the Type Engine, I haven't been able to use this file in current versions of Illustrator.
If I could get this file to open, uncorrupted, I could finally get rid of Illustrator 10. Illustrator 10 does not have any problem with this file (and is still faster than CS4 in everything except selecting a lot of objects.)
I am posting this on the forums for any other opinions/ideas from the 'Illustrator Gurus' as a first step. I want to get in contact with someone at Adobe to see if we can address this problem and possibly get it fixed with CS5. I know that this is a user-to-user forum, but I'm not sure who, where and how to contact Adobe for this issue. Maybe someone on these forums can help with that as well.
Thank you for your patience for getting this far in my long post and I would really appreciate any response.
Dave

Thanks Wade for responding,
Did you try trashing your Adobe Illustrator CS4 Settings folder in your User's Preferences?
Yes, I've tried deleting prefs. Basically I've tried to rule out any problems with Illustrator as a whole. This issue has also occured on a clean install of OS X and Illustrator on a new User Account with the opening of this file being the first task that Illustrator has. There is no problem with Illustrator per se, but I think it is more of a limitation in Illustrator based on the number of type objects.
You could also try saving it out of 10 as a pdf or as postscript and distilling it then open that in ai or place it id a blank AI document.
Did you try to place instead of opening it?
I haven't tried any of these since the resulting file would be utterly unusable. Basically this would create a 'flat' file with 'broken' strings of text (type on a path especially) and type being uneditable. (Now that I think about it, CS4 does a much better job of opening pdfs without breaking type.) I still think this approach is not really a prudent course of action since, as of now, I can continue to maintain this map in Illy 10.
In my experimentation, the results are as follows:
1. Opening the file without updating the legacy type, saving the file as a new document, closing and then re-opening results in a file you would expect. Every object is where it is supposed to be. Downfall of this method: I absolutely need the type to be editable, especially the 'Street Type' since this type is actually used to create map indexes.
2. Opening the file with updating the legacy type, saving the file as a new document, closing and then re-opening results in a file that exhibits the exact behavior that has been posted in the thread-starter. This method results in the 'Bruce Gray' type being the duplicated item.
3. Opening the file without updating the legacy type, then splitting the file into layer groups and saving as separate files. Then opening the resulting CS4 files, updating the legacy type, copy & pasting (with layer structure) into a new document results in a usable file up to a point. I can get about 95% of it put back together and then the problem manifests. I have thought that it might be a "bad" object on one of the layers but I have ruled that out by: a.) All of the resulting sub-files (files that are portions of the larger) exhibit no problems at all. Usually our PS printers find issues that Illy does not and there is no problem in RIPing the sub-files. b.) If I change the paste order, meaning copying & pasting from the top-most layers to the bottom-most layers, vice-versa, and a completely random paste order, different objects (other than the 'Bruce Gray' type) will be duplicated. I've had one of my park screens, a zip code type object and a school district boundary be the duplicated object.
All of these experiments has lead me to believe that the Illustrator Type Engine is the main facilitor. I just don't think it can handle that many individual point type objects. I know CS4 can handle the number of objects, based on the fact that a legacy type (non-updated) file works.
I am almost entirely sure that Illustrator is working exactly as it is supposed to and that the vast majority of Illy users will never run into this issue. This file is by far the largest file that I work on. I would just like to be able to use an Intel native version of CS to continue maintaining this map.
On a side note: About three years ago, I tried working with this file in Freehand MX. Freehand initially would open the Illy file without a problem. I could work on it but when I would save it as a Freehand file, close it and re-open it, I would get your standard File Corruption. It would partially open, give me a corruption dialog, and open the file as a blank document. I alwa ys knew there was a reason to use Illustrator over Freehand for making maps.

File corrupt error

Hello All,
Using Adobe Mobile Packager and a swf files, i created a package for the Symbion Phones which is a self signed .sis file. When i tried installing it to the phone.......it gave an error "File Corrupt Error" .
Any guesses for the error?????
Also, the .swf file was created using CS3 suite. I don't know if this is a silly question........but can Adobe Mobile packager create package for swf files created using CS3........or is it only for .....CS4???????
Would appreicate all replies or any kind of help for this issue.
Thanks and Regards
H.R.

I don't use adobe mobile packager for this purpose; however there are some basic things to worry about during packaging so that your file won't be corrupted:
1> Did you Entered Correct UID order for an edition (2nd or 3rd Editions)?
2> Did you create .key and .cer files ? (key and certificate) ?
3> Did your Swf run normally in the mobile phone before packaging ?
4> Did you make sure you entered a valid path for your application to be installed during extraction ?

InDesign CS4: File names change to string of numbers

Occasionally, one of our users will save an InDesign CS4 file, only to have the file name change. For example, a file originally named "#kwn25501.bcbsNM.indd" was saved as "#kwn25501.bc157-1223857848."
If the user is not aware that this has happened, things can go horribly, terribly wrong in our production environment. The "numbered" file may be missing key elements, or be somehow be corrupt in some fashion. In one case, this led us to having to reprint a job because the "numbered" file was missing a photo; somehow, that file was used (and perhaps renamed after the fact) to create the final output.
We use Macs running InDesign CS4 6.0.5. Some of our Macs are running Tiger 10.4.11, while others are running Leopard 10.5.8. The problem seems to related to the Leopard machines, although that is not 100 percent certain at this point. All of these Macs are bound to Active Directory and save files to a Windows 2003 server. I know Adobe recommends against working on files over a network, but perhaps there is an explanation for this file renaming aside from network issues.
Any light that can be shed on this issue will be greatly appreciated. Thanks!
Kevin Stauffer

Check to see if maybe your original filename is the problem.
You may need that particular name for a workflow reason, but some of the symbols in the middle of your filename are generally not a good idea. Especially working off of a server, file names should be ONLY alpha-numeric characters, no symbols, no periods (except for the file type) and only underscores or dashes to separate words, no spaces.
The reason is some of those symbols get picked up as machine language and all sorts of bad can happen as a result.
Message was edited by: Michael Riordan

Indesign CS3 & 10.6.2 server: file corruption

Hi All,
I'm having problems with one of our customer's setup. They're experiencing some sort of file corruption on Indesign CS3 files. These files are worked on by students in classrooms. At random, files won't open anymore in Indesign CS3 (or in CS4),so they need to start all over again. At first, file corruption occured seldom, but in the last few days I get too many reports. So I definately think something is at hand here.
The students log in to their network home folders. Client and server(s) are mac os x 10.6.2.
Clients / servers are fresh installed last x-mas. 2 fileservers (1 classroom, 1 homedirectory), 1 dedicated od server, 700 students, 45 classes. Both fileservers are new iron.
Before this, I had the same setup in 10.4.11, and this worked flawlessly for almost two years. So I know I can work with this setup over a network.
Before I start suspecting (and swapping) hardware, does anyone have pointers where to look or tests I could do?
Much appreciated.
Edgar

Well, going back to 10.4 is not an option. The previous servers (PPC G5 xserves) running the 10.4 setup have been sold. Current hardware was delivered with only 10.6 software so that rules out switching back to 10.5 as well.
You mention ACL's. I could dive into that. Since 10.5 Apple introduced default ACL's for the spotlight indexing process. The share is rather simple, it uses mainly posix permissions because it contains the homedirectories. In that perspective, the only change (besides a new afp stack) is the spotlight ACL. I could remove it, spotlight isn't running on that share.
I don't think I can switch to SMB for the user homedir stuff. If it was a normal data share it wouldn't be a problem.
Seems I'm stuck between a rock and a hard place..

What to do if yy PC says install disc for CS4 is corrupt and will not proceed?

My PC says install disc for CS4 is corrupt. How can this be corrected?

You can download the installation file(s) and use your serial number from the disc to activate it.
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

I cant edit an CS4 file open in CS6. Colours, Most of the tools are in-active

I cant edit an CS4 file open in CS6. Colours, Most of the tools are in-activeC

once is enough to ask. Editing problemCS6

Downlaoded .exe for Firefox5 gives "file corrupted" error when I try to open it

I am running Windows XP on Parallels 5 on top of MAC OSX on an iMac24.
I have no problems downloading Firefox 5 on OSX for Mac, nor for downloading Thunderbird on WinXP/Parallels5.
Just Firefox5.exe comes up "file corrupted" when I try to run it or open it on WinXP/Parallels5.

Post in Microsoft's Powerpoint (Mac) message boards.

Sync File Corruption with 64-bit Vista/iTunes

I'm getting some file corruption problems when trying to sync my new 16GB iPhone with the latest 64-bit iTunes (7.6.0.29). "yes I have the 64-bit version".
The sync seems to go correctly, but I have yet to be able to play any videos all the way through. Videos purchased from iTunes as well as self encoded files. All said files were working on my 60GB iPod Video with previous versions of iTunes on the same 64-bit Vista machine.
The videos will start playing fine, but will eventually reach a point in the file that was corrupted during transfer, the audio will drop out and the video will distort, then it exits from the video as if it reached the end of the file. No error messages or anything. If I play the file again, it will do the same thing at the exact same spot, so its a problem in the file. Now, if I remove the file and add it back, the file still has the same problem, but in a different location, which means the source is fine, but the copy to the device during the sync is the issue.
To test, I synced the exact same content from my notebook which is 32-bit XP, and zero problems. So I'm currently just using my notebook for syncing at the moment.
Anyone else with 64-bit Vista have a similar issue?

Hello
I have a couple troubleshooting steps I would like you to try. I myself do not have a 64 bit Vista so I can not test this to confirm if the same issue occurs or not.
1. Attempt to Sync content using each of the USB Ports. See if all USB Ports pose the same issue with the video. Or if you found when where it does not occur.
2. Test on a new user on the Vista Machine. If possible take at least one or 2 movies and copy them onto a flash drive or something. And bring them into iTunes on a new user account. You may need to Authorize that user and De-authorize when your done. Does the same issue occur?
3. If you perform a reboot on the iPhone, Then Sync Data over. Does the same issue occur?
4. If possible could you restore the iPhone. Then Re-sync and see if same issue occurs.
5. Is this happening with all videos? or only certain ones? Does the corruption occur at the same time frame every time? If so is it the same time frame for all videos or slightly different?
6. Perform an Uninstall and Reinstall of iTunes on your system, See if same issue occurs.
Let us know how it goes.

Is there a way to import a indd CS4 file with its Data Fields names and properties into CC?

I have to convert numerous files from CS4 to CC. The CS4 files are using external data from a CSV file. When I open the file in CS4 I can enable the preview and see the data from the CSV file. But when I save the file as indd or idml and try to open it in InDesignCC then I can't see the data as preview. I can see the Data fields (text).I think it's because it doesn't recognize the data fields from the CS4 file. If I delete a data field and remap it I will be able to see the preview for the field I just mapped. the other fields remain the unchanged, like they were just text.
Any help with this topic will be very appreciated. I have about 70 data fields per document and about 100 documents to go through.
Update: The symbol for a data field, ex: «fullname_2» change size when I delete and remap it. Explanation: When I open the CS4 file in IndesignCC I can't view a preview of the Data field(s) (almost positive because it's plain text). The data fields show like this «fullname_2». But when I delete that and drag a field from the data field list it shows like this <<fullname_2>>. So definitely, CC is not reading the data fields from InDesign CS4.
P.S.: The fields above («fullname_2» and <<fullname_2>> are copy and paste from Indesign CC.

I'm attaching this image so this forum can notice the difference on the Data fields from CS4 and the ones added on CC

Transaction log shipping restore with standby failed: log file corrupted

Restore transaction log failed and I get this error: for only 04 no of database in same SQL server, renaming are working fine.
Date
9/10/2014 6:09:27 AM
Log
Job History (LSRestore_DATA_TPSSYS)
Step ID
1
Server
DATADR
Job Name
LSRestore_DATA_TPSSYS
Step Name
Log shipping restore log job step.
Duration
00:00:03
Sql Severity        0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted
0
Message
2014-09-10 06:09:30.37 *** Error: Could not apply log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' to secondary database 'TPSSYS'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: An error occurred while processing the log for database 'TPSSYS'.
If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'TPSSYS' (13:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
Processed 0 pages for database 'TPSSYS', file 'TPSSYS' on file 1.
Processed 1 pages for database 'TPSSYS', file 'TPSSYS_log' on file 1.(.Net SqlClient Data Provider) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Skipping log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' for secondary database 'TPSSYS' because the file could not be verified.
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Deleting old log backup files. Primary Database: 'TPSSYS'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 The restore operation completed with errors. Secondary ID: 'dd25135a-24dd-4642-83d2-424f29e9e04c'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.38 ----- END OF TRANSACTION LOG RESTORE
Exit Status: 1 (Error)

I Have restore the database to new server and check with new log shipping but its give this same error again, If it is network issue i believe issue need to occur on every database in that server with log shipping configuration
error :
Message
2014-09-12 10:50:03.18   *** Error: Could not apply log backup file 'E:\LsSecondery\EAPDAT\EAPDAT_20140912051511.trn' to secondary database 'EAPDAT'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-12 10:50:03.18   *** Error: An error occurred while processing the log for database 'EAPDAT'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'EAPDAT' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
can this happened due to data base or log file corruption, if so how can i check on that to verify the issue
Its not necessary if the issue is with network it would happen every day IMO it basically happens when load on network is high and you transfer log file which is big in size.
As per message database engine was not able to restore log backup and said that you must rebuild log because it did not find out log to be consistent. From here it seems log corruption.
Is it the same log file you restored ? if that is the case since log file was corrupt it would ofcourse give error on wehatever server you restore.
Can you try creating logshipping on new server by taking fresh full and log backup and see if you get issue there as well. I would also say you to raise case with Microsoft and let them tell what is root cause to this problem
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

CS4 File Corruptions

Similar Messages

Maybe you are looking for