CS4 Fwks Issues on Mac

Hey all.
I'm having a real issue with fireworks cs4 on mac.
(macbook pro, 10.5, 4gb ram, 15", intel)
Not sure what the heck is causing it.
But I've noticed that I have to sometimes click 3 times just
to select an object in fireworks.
Has anyone else experienced this?
It's almost like the windows canvas doesn't seem to be
focused (even though it is).
What's worse is that when I try to use my wacom stylus, it
can't even pick up the stylus touching the canvas, I have to click
and click and click to get it to even start drawing (click, I mean
press), and by that time, its already counted that push as a draw,
then un-focuses again.
Anyone experienced this issue?
Thanks :)

I am having lots of problems with fireworks cs4 since I switched to mac. My wacom intuos 3 tablet is completely useless with Fireworks. I tried cs3 and the same problem was there. No other software give me this problem. I talked to Wacom today, and they said it was a Fireworks bug and that it had existed for years. I am very surprised (and disappointed) that they haven't fixed it yet.

Similar Messages

CS4 Installation issues on New Mac

I am a CS4 user. My computer died and I need to load CS4 onto my newer Mac OS X v 10.7.5. I am having trouble with the installation from the original discs. Any suggestions?

Define "troubles" including any error messages

PhotoShop CS4 Fatal Error on Mac

Hi, Can anyone help with Photoshop CS4 issue on Mac OS 10.6.8?
Getting— 'Fatal Error' missing component/library/applications/adobe version cue CS4/client4.0.0/version cue.framework — message when I try to open a file
Before this, with the help of Gene7 i was able to re-activate with license recovery. Worked until I tried to open a file. Updates seem current...
Thank you.
Monte

That library is missing. You need to reinstall the application (and updates) to replace the missing files.
Most likely this is because you used Apple's "migration" tool, which doesn't copy all support files needed by applications.

Test: Using Crop marks in indesign CS4 with Epson 3800 Mac 10.5.7

Jun 19, 2009 9:35 PM
Crop marks using indesign CS4 with Epson 3800 Mac 10.5.7
My crop marks and pages are printing larger than my document sizes. My paper size is 13x19, so I should have crop marks at the exact corners of the page sizes. But indesign is printing the entire document larger. So my document which is 11x14.75 is now printing 11.25x15.5. All my settings are correct. So, is anyone else using an Epson 3800 with CS4 indesign having issues such as the above? And can I ask (beg) a few of you to do a test print with crop marks and let me know the results?
My workflow has been completely stalled because I can't get my pages to print the right sizes with the crop marks at the right measurements. I'm printing a photo portfolio on the Lumijet double sided paper and "when" it did work awhile back sometime several months ago, the finals looked great. I've already reinstalled both the Epson 3800 driver and the Indesign CS4 software, but the results are still the same.
So, here are my settings:
document size: 11x14.75
in the print panel:
Printer: Epson 3800
Setup: Paper size: Super A3/B13x19, scale 100% width & height, page position Centered
Marks & Bleed: Marks: "Crop Marks" checked. offset: 0, weight: .25, Bleed and Slug: Use Document bleed settings, include slug area. The bleed is 0 for top, bottom, left and right
Color Management: Document profile: Adobe RGB, Options: Indesign handles colors, Printer Profile: (A custom made profile using Xrite for the 3800 with Lumijet paper)
The settings on the Epson 3800
Epson 3800 Printer
Presets (set for the profile mentioned above)
No Color management
Sometimes, on a whim, the printer and indesign cooperate together like good little children should. But not often. And I can not conclude why they are nice to each other sometimes, but given the same detailed data at other times, they fight.
If anyone could run through a similar process using indesign with a photo layout and setting up the printer settings for both the Epson 3800 and in the indesign program and let me know their results, I would value your conclusions very much. You don't even have to waste paper or ink. Finally, after wasting so many pages of paper and of ink. I deleted the photos from the page, and printed it blank with only the crop marks for me to measure if it was coming out right or not.
Thank you for any response. And feel free to call me if you want to vent about Epson 3800's or about Indesign CS4 anytime! I'm up late.... 646 256 8853.
Thaddeus

I specified the paper size as strictly 13x19, no boarderless, no retain size. Same problem. I also did as you suggested below. The pdf document does remain true to the document. As a pdf doc. I changed the color mgmt to Adobe rgb 1998. It looks okay, but not as lively as I get when printing correctly with my color mgmt working and in sync.
Your final question about simply using photoshop. Well... I might go back to it and give up on Indesign if this is the case that it won't simply crop my documents to the sizes that I input them to be cropped as. But, I am using Indesign so that I can create a page layout that I can't do in Photoshop. My folio is about 25 or more pages with double page spreads. I am printing on a two-sided Lumijet paper and my folio was custom designed to be cut out at 11x14.75. If and when it is printed correctly, I am printing on both sides of the paper and trimming it to exact size.
It sounds as if you have exhausted the potential problems and don't have a clear explanation for why the doc isn't printing correctly in Indesign either with the color mgmt. or the document sizes. I'll try one more print using a different color profile similar enough to get at minimum, an okay print. If it doesn't print at least okay, then it isn't most likely my profile..... Okay done. Crazy. The color is inaccurate, but for some reason or another, the document size printed correctly. It measured exactly 11x14.75. What I have done during this period of time is:
First) I did as you suggested and turned the Print to Adobe PDF 9 and created a print there. I measured it and it did measure correctly. I didn't love the color, but... at least it is measuring correctly.
Second) I turned the Printer back to Epson 3800 (I'm beginning to think that this simple gesture was what caused the printer to print correctly) I didn't change any settings, but I did make sure that they were set correctly as before. The paper size was set to 13x19. When I make sure this setting is right in the "printer" dialogue for the Epson 3800, and then switch back to ID, the printer dialogue in Id changes to "Define by Printer." But I changed nothing, other than the profile to an older one that I used before. The color is still inaccurate, but at least for two prints just now back to back, the measurements were correct. What to do? Lol.
Thanks again for all of your time spent trying to resolve this issue.
Sincerely,
Thaddeus

InDesign CS4 Printing issue

Hi:
I use InDesign CS4 in my job as a church office manager. I print bulletins that are usually 3 letter-sized pages, landscape, 2-sided, and newsletters that are 2 11x17 pages, landscape, 2-sided. I'm working in Mac OS 10.5.8.
Until today, I was using a fairly old HP 8100dn printer. When I upgraded from CS3 to CS4 last summer, I found a strange thing: I couldn't print duplex on letter-sized paper from InDesign. No matter what settings I selected, the printing would not duplex. As a workaround, I had to export everything as a PDF and print from Acrobat, where the duplexing worked fine.
Weirdly, 11x17 duplex printing worked correctly from InDesign.
I never solved the problem, but when I posted this on the forum last summer, one responder said that it might have had something to do with the 8100's age and its PostScript Level 2 emulation.
Just today, my office got a new(er) printer, an HP 8150dn. This one has PostScript Level 3 emulation.
Precisely the same problem. Letter-sized won't duplex from ID; 11x17 will. Exporting letter-sized documents to PDF and printing from Acrobat is once again the workaround. It's not the worst thing in the world, but it is a bit of a hassle.
Does anyone have any sort of idea about why this is happening, or better, how it might be fixed?
Thanks much,
GT
PS: ID won't duplex when printing in portrait orientation on letter-sized paper, either.
Message was edited by: It doesn't work!

Well, I fixed it, I think… I googled "Printing issues in Mac OS," which led me to install Gutenprint 5.2.5 — whatever the heck that is — and suddenly duplex printing worked in both landscape and portrait on letter-sized paper.
Unfortunately, and yet not at all surprisingly, I now couldn't print to 11x17 at all. No matter what I did, the printer used Tray 2 (letter), or told me to put custom paper in Tray 1.
So, as a last-ditch attempt to resolve this before I jumped off the roof, I reset the printer to its factory defaults and deleted all traces of it from Mac OS's Printer and Fax window.
Then I created one new printer called "8150 (Gutenprint)" using the Gutenprint driver, and one called "8150 (11x17)" using the default HP driver, both using the same IP address. Lo and behold, when I select the one, I can print duplexed on letter size, and when I select the other, I can do the same on 11x17.
I don't know if this is the sort of thing that a real tech-head would condone, but it finally seems to work. Since I'd never be printing to both printers simultaneously, I figure I can live with this.
If anyone cares to explain to me in layman's terms what Gutenprint is all about, I'd love to be educated…
GT

Just moved CS4 Web from old mac to new using time machine. Apps won't launch. Help?

Just moved CS4 Web from old mac to new using time machine. I get an error when I try to launch a program on the new computer (150:30). After contacting live chat about the issue and providing all serial numbers etc. I was directed to a download. The download was a .dmg file that my computer did not recognize. It was suggested that I ask the experts on the forum how to resolve the issue. I have all the discs and serial numbers but the new macbook pro doesn't take discs (I guess they think all apps are downloadable now). Any ideas?

Hmm... I don't know why they sent you here... CS4 is not part of the Cloud
I have some download links for earlier versions of Premiere Pro and Premiere Elements, but not CS4 Web
My best idea is to take a LARGE USB memory stick to a friend with a DVD drive and copy your DVD over to the USB memory stick
Or, ask in the forum for your program(s) to find out if anyone has CS4 download links
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Illustraor cs4 stopped working on mac 10.6

Have Illustrator CS4 installed on my Mac running 10.6.4. was running perfectly fine. I've done no upgrades or system changes. All of a sudden program won't launch. Crashes before it even starts up. CS4 bridge works fine as well as my Photo shop CS. Granted these are older programs but they all work fine and get the job done for what i need.. Why would Illustrator stop all of a sudden? I've reinstalled it twice.. ran disk utility, dumped the preferences.. to no avail. Help!!

rtcent,
The order of doing things is crucial in some cases, see 3), 4), and 6), about that.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

Uninstall and run the Cleaner Tool
Uninstall Creative Suite 4 and point products (Mac OS X)
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Transferring CS4 from an old Mac to a new one, I get a notice saying "licensing for this product has stopped working" Error 150:30. Don't know what to do? Thanks.

I'm trying to migrate my CS4 from my old Mac to my new one. When trying to open photoshop, i get a message saying "Licensing for this product has stopped working." And "Error: 150:30" I don't know what to do from here. Can someone help me? Thanks.

"Migrating" and/or "transferring" an application is not just asking for trouble but demanding it!
Always install an Adobe application from scratch, from the original media: CD or download.

Transferring Old CS4 from my old Mac to my New Mac Error 6.

I am trying to transfer my old CS4 from my old Mac to a new Mac which doesn't have a disc drive. I copied all the files to a memory stick and the pulled them from the stick into the application folder on my new Mac but the software will not start and say Licensing Error 6.
It this the right way to transfer my old CS4 from my old Mac to the new one which doesn't have a disc drive? and if so what does Error 6 mean and how to I get that sorted so I can work with my CS4 on my new Mac?
Also I would like to have PS and AI in my doc - I am so bad to computer stuff so please explain it all in very plain language. ( :
Kind Regards
D

You can't do that. Download the most current version of PS CS4 for Mac from the Adobe download site and install it. Then you can copy over your preference file and any edits you have done in PS CS4 from the old Mac.
But if this new Mac you have is running Mavericks or Yosemite CS4 might not work on those newer versions of OS X. Not sure, I gave up on Mac OS X about a year ago.

Do we know if CS4 will work with Mac OS 10.7 Lion?

I wondered if anyone has heard about the potential friendliness of Creative Suite CS4 with the new Mac OS, 10.7. Anyone?

I would contact Adobe Tech Support about that. It seems that new editions of Apple OSes sometimes lose compatibility with legacy software. Adobe might only be able to tell you about products that are in their current lifecycle and I'm not sure if CS4 has reached its EOL (end of life) yet.

How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

Hi dsalacain,
Are you trying to run the setup from network location. If yes please copy the installation file to the desktop of the Mac and try installing again.
Regards,
Romit Sinha

Dreamweaver CS4 strange issues happening

Suddenly when I do a find and replace and I do a carriage return in the replace portion of the find/replace window to make my edit go to an extra line, the carriage return occurs behind it on the page I'm editing. It doesn't add a <p> tag in the document, just kind of highlights what I have in the find window and each time I hit Enter the next instance of the what I'm trying to find gets highlighted.
Also, when I try to add <strong> tags to my document this appears on the page instead <strong>
What the hell?
I tried recreating my configuration folder (I'm on Windows Vista) but it still happens.
Any ideas??

Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
Just a thought ...
This may help!
Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
It is worth a try!
All the best.

Had CS4 on Power PC Mac (Non Intel) Now have new iMac and trying to install CS6 but won't accept serial number

Had CS4 on Power PC Mac (Non Intel) along with prior Photoshop versions. Now I have new iMac and trying to install CS6 but it won't accept my original serial number (Starts with PSW401, etc.).

I know what you are saying. I had purchased the CS5.5 upgrade, and a week later got the CS6 upgrade. I did this back in 2012. I had a old Mac Power PC which does not allow you to install CS5.5 or CS6 because it was not an intel processor. So even though I had the upgrades I never installed them. I waited until my old MAC died which it did this past weekend. And now that I have a new iMac I tried to install the new software. All of my past upgrades referenced my original Photoshop that was still resident on my old Mac. But since the install no longer has that reference because of the new computer, it will not accept any of my past serial numbers that it needs for the install.

CS4 Fwks Issues on Mac

Similar Messages

Maybe you are looking for