CS4 Healing Brush is leaving grey instead of sourced color

I'm having trouble with the CS4 Healing Brush. In the past, when I used the alt key to source the flesh color of a person's face and then applied it to another area to even out what I had already cloned with the cloning brush, it always worked great. But now the healing brush lays down a greyish color, totally ruining the flesh color. I'm wondering if I accidentaly hit a key somewhere and changed a setting. I can't find anything that alters the color of the healing brush. And anyway, it should be the color I choose with my alt key.
Someone, please help! I used my healing brush a lot, in conjunction with my cloning tool and It has always been very successful up to now.

Yes, I did have the mode set to something else - luminosity. I changed it to normal and it works! Thanks for your help. I must have been experimenting with something else recently and forgot to change it back).
Thanks again!

Similar Messages

Healing Brush "skips", leaves a line of brush-sized circles instead of a smooth line

When I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer

If the spacing of a tool's brush is 100% then it will behave as you described.
Reduce the spacing to get a stroke without circles.
Reset Tool as shown by R_Kelly will set the spacing to 25%, but it'll also reset the size and hardness of the brush and reset other options of the tool.

Healing brush paints in grey or white..

I downloaded trial version of cs5 but was shocked to see that da most important tool for retouching,healing, doesnt work properly, it samples correctly and it seems perfect as long i hold & drag but as i release da mouse its completely different.Its either grey or white.Sometimes when i click, someother part is painted or healed.I have lost 1GB ram but still i have 2GB on win7. And threre are no displacement maps as well. No one knows about this healing problem, i had this problem in ps7 as well but then i was using win XP on the other computer wich had only 128 ram. Plz help as only few days are left.

kushaldeep chaujar wrote:
Wat else u can suggest sir?
I apologize for the basic nature of the following, but let's make absolutely sure you're using the Healing Brush tool as expected.
1. Save this small JPEG image on your hard drive, open it in Photoshop, and zoom to 200%.
2. Select the Healing Brush tool (not Spot Healing Brush):
3. Set a brush size a little larger than the dark spot on the boy's face, and make it a hard edged brush:
4. Hold down the Alt key, choose a location nearby to sample FROM, and click down/up the left mouse button, then let up the Alt key.
5. Move the cursor over the spot and click down the left mouse button. You should see the pixels from the source location cloned, but the color won't match:
6. When you let up the mouse button then move the mouse away, the Healing Brush will complete the operation by matching the spot color to the surroundings:
Where does what you see differ from what's shown above?
-Noel

CS4 Healing Brush Preview

Hello, using CS4 on Mac Snow Leopard, I have lost the function to see the effects of the healing brush within the circle, prior to it being applied. Can anyone advise on what might be wrong?. Re-setting the tool does ot help.
Thanks.

Thanks......OK, found it, and checked the 'show overlay' box. This brought up a duplicate image, laid over the original, not the 'effect preview' within the healing circle.
So frustrating, this feature was the only reason I upgraded to CS4!.
Cheers.

CS4 spot healing brush

When I use the spot healing brush or the healing brush, the actual output is a tiny spot in the center of the round brush cursor. It doesn't matter what size the brush is; it still outputs just a point in the center of the round cursor. It's driving me crazy!
My paint brush was doing the same thing until I turned off the Shape Dynamics.
Settings:
Clone Source > Show overly (unchecked)
Clone Source > Clipped (unchecked)
Brushes > Shape dynamics (unchecked, locked)
PS CS4, Mac Pro, OSX 10.5, 10G RAM
Thanks for your help.

This is the healing and spot healing brush or tool if you wish.
This not a bad feature request and perhaps a brilliant one Phil, to have the healing and spot healing and patch tool to have the option to heal on a separate layer so you never actually do anything to the original with these tools and give you a chance to edit what you have done with the eraser and history brush, opacity settings and mode blending.
Also a chance to redefine the edges of the healed or patch regions. It's an outstanding inspiration. You set the reference and then when you start using the tool it creates a layer if you need yet another layer you hold down a key combination and a new layer associated with
future use of the tool is on that layer unless you hod down a key combination that sets you back to the previous layer.
This is just a wonderfully delightful ingenious impulse.

CS4 - crash with healing brush

Again, today, I have the spinning beach ball after using the healing brush on a 489 MB image.
I have to restart the MacPro (OS 10.5.6) and - of course -I will lose the last 15 minutes of work. I can't afford to save every 60 seconds, and this is a repeated crash event for me.
How do I get a Photoshop crash report to see what is wrong?
I can look at the Mac's console report after I restart - is that the only way?
Dick

Richard,
Still not sure what you did. Did you buy the complete CS 4 Suite, but just wish to install Photoshop and Dreamweaver from that Suite?
If so, maybe the solution is to completely uninstall all previous versions of Adobe software, run system maintenance, and do a fresh install Photoshop CS4 and Dreamweaver CS4 alone. No need to install CS2 or CS3 again -- just use their serial numbers when prompted.
>I seem to recall reading that Adobe designed it so that you can only upgrade from a suite to the next ENTIRE suite package - and not upgrade individual programs. That's just what I tried to do - CS3 creative suite to Photoshop CS4 - and the result is a big mess.
But, if you just bought the two individual apps, and not the Suite, you did not upgrade Suite to Suite. A single application is not an upgrade path from a previous Creative Suite -- only a Suite to Suite upgrade is, although you don't have to install all CS4 components. If this is what you did, then you need to call Adobe and see if they'll work something out. A friend of mine was able to install a Photoshop CS4 upgrade (he has the complete CS3 Suite) -- but only after an exasperating three hours on the phone with Adobe somewhere in downtown India.
>Can we just bundle Photoshop and Dreamweaver - for the countless photographers who have websites
But Dreamweaver is probably far more overkill here than Photoshop is.
Neil

Healing Brush not working in CS4.

Hello,
The Healing Brush in my copy of CS4 has always been a problematic tool.
Some times it worked and sometimes it didn't.
Now it never works.
Can anyone please help me to get it working properly?
Thanks for your consideration,
cobaltgreen

Maybe you misunderstand the function of the healing brush. There are two healing brushes. One is an automatic brush that you can click on a spot, and it will attempt to automatically heal that spot. The other is like the clone stamp, except it attempts to repair the copied pixels to match the destination. Do neither functions work for you?

Healing Brush use has a grey smudgy cast

I am using CS4, rev 11.0.2, on a Win XP Pro, SP3 system with 2GB of ram. I use the healing brush, with normal mode, sampled, aligned, and set to current layer, because that is where I am working,
I Alt-click to set a sample point in an area with no obvious cast. I then go to heal a nearby area by left clicking and painting with one pass through the area to be healed. The area looks healed until I release the left mouse button. The area's healed color then takes on a grayish cast, although otherwise it has been "healed". The imperfections are gone, but the area appears grayish.
What am I doing wrong. I reset the Preferences, but that did not help.
Reed

I don't think I want the Clone Stamp tool (I tried it and it does seem to help.) I am trying to follow a Kelby video tutorial titled "Mastering Layers in CS4" by Matt Kloskowski (spelling?) and am working on lesson 20, Retouching with Layers. As nearly as I can see from the video, my settings are the same as his, except he does not get the gray cast, and I do.
Reed

Streaky healing brush in CS4

I like CS4 and have very few problems with it. But one curious behaviour is that from time to time clicking to create a healing area using the Healing Brush creates a diagonal streak from upper left to lower right as if someone had held down the healing brush (at the beginning of the streak) and pulled the brush diagonally to create the diagonal streak. This happens when the healing area clicked is nowhere near the start of the diagonal streak. Undoing and re-healing a few times usually gets it done ok but it is odd.

Constrained strokes? You know, when you accidentally hold down Shift...
Mylenium

When I use spot or healing brush it works a little and then starts leaving dark smudges or lines

The spot and healing brush seems to work a little, but then leaves dark smudges or even complete dark lines. Also seems to pick up other objects in the picture as if it is copying a section of the picture. Have tried to reset, but nothing works.

The Spot Healing Brush in Photoshop CS5 uses Content Aware Fill, and it's function is EXACTLY to go find other parts of the picture to fill in over what you clicked on. What is it that you expect it to do if not that?
As Christoph has said, please provide some image examples. It may be that it's not working correctly, but it's impossible to tell whether you're seeing it do what's expected without seeing the before/after results you're seeing.
-Noel

Healing brush/clone stamp cursor is dark.

I hope I've overlooked something very simple. In CS3 on my PC, the circular cursor for healing brush and clone stamp (probably others, too) is always a contrasting color to the underlying image so the circle is always very visible. With the same preferences set, CS4 always has a very dark, perhaps black circular cursor, so that in dark areas, it completely disappears, making it difficult to select the correct area.
Just me, my PC or CS4?
Thanks!

Thanks for the answer.
I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
I'll try to get the Photoshop system info as soon as possible.
Thanks again.
Zee

Will upscaling or using clone stamp/healing brush to upsize give better resolution?

I'm designing a 5.25" square CD cover using a rectangular image and the resolution needs to be min. 300ppi to print . The artist sent me the art image (painting) from her camera as a jpeg and it goes to photoshop as a large (approx 20" X 24") file at 72 ppi. To change the ppi to 300 without resampling (I've been told this is best), the image becomes too narrow (4 1/2") and too high (5.9").
I don't want to crop because I don't want to lose content. I want the image to completely cover the CD cover And I want to keep the same proportions for certain parts of the image. So I believe my two best options are as follows:
1. Bring the image to 300ppi with the measurements above, protect certain parts of the image on an alpha channel, content aware scale the rest of the image wider to make it square and then resize down a bit for the CD cover or
2. Bring the image to 300ppi and then use the clone stamp and healing brush tool or content aware fill (doesn't work so well on this image) to duplicate and extend the sides of the image to widen and square it and then resize down a bit for the CD cover.
Does anyone know which of these options will give the best resolution? Is upscaling more likely to cause pixelization than the other option? Is there a better way? Should I do options 1 and 2 to the large 72 resolution image instead of bringing it to 300ppi first and then upscale or clone stamp--would that give better results?
Thanks, any help is greatly appreciated!

You've said that you don't want to crop, and you want to cover the entire CD cover. That leaves you with two choices. Extend the short side(s) via cloning, content aware fill, etc. or stretch the image in one direction, either with the standard free-transform or with content aware transform. See what looks best. Your resolution will be fine. You can res up if you need to. The amount you're short will not matter here. Leave room for bleed - usually 1/8".

Healing Brush Problem (PSCS5)

Hi there, today my friend was creating tilable textures using the Offset tool, and then taking the Healing Brush tool to fix up the bad edges between the tiles. This has worked forever on his PC, but now suddenly is causing distortion when he uses it. Instead of having a soft edge to the healing brush marks, it comes out with distorted, pixelated edges.
Things to note:
• all other tools with soft edges work fine
• if the file is saved out as a different file format the problem is saved with it (still visible)
• only happens in CS5
• the pixelation on the edges of the brush strokes are solid color and don't look the same as what happens if turing a layer to dissovle or anything
• Photoshop CS5 Extended 64bit, Windows 7 64bit, GTX 260
-Thanks

So let me make sure I fully understand what is being attempted:
You're using the Healing Brush to essentially clone pixels from another part of the image to an area of the image that's transparent. You expect the soft edge of the brush to leave the edge of the result soft.
I think I can reproduce what you're seeing. Notably the blending doesn't seem to work properly either.
Here's what I see while brushing, then after I let up on the mouse button:
I think the real problem here is that it really doesn't seem to make much sense to use the Healing Brush on a transparent part of the image. It's prime function is to mix the result in with the surroundings. What are the surroundings in a transparent area? At best, you might hope to get white pixels there.
Some ideas that might help you work around this issue:
1. Use a layer mask to manage the transparency, and have the pattern entirely there in the image. In other words, separate the texture prep entirely from the transparency prep.
2. Use the Clone Stamp tool instead of the Healing Brush if you really need to brush over transparent pixels.
-Noel

Healing brush problem - CS6 extended

My brush healing tool in CS6 is leaving a texture trail instead of smoothly blending edges. I have the "sampled" icon checked, not the"pattern" icon. As far as I am aware, I have changed no settings since I last used this tool successfully. I have reset the tools, to no avail. The trail has dark and light spots in it. I have all the latest updates. I am running on a Mac Pro with 16GB of RAM. Suggestions?
phslug

So let me make sure I fully understand what is being attempted:
You're using the Healing Brush to essentially clone pixels from another part of the image to an area of the image that's transparent. You expect the soft edge of the brush to leave the edge of the result soft.
I think I can reproduce what you're seeing. Notably the blending doesn't seem to work properly either.
Here's what I see while brushing, then after I let up on the mouse button:
I think the real problem here is that it really doesn't seem to make much sense to use the Healing Brush on a transparent part of the image. It's prime function is to mix the result in with the surroundings. What are the surroundings in a transparent area? At best, you might hope to get white pixels there.
Some ideas that might help you work around this issue:
1. Use a layer mask to manage the transparency, and have the pattern entirely there in the image. In other words, separate the texture prep entirely from the transparency prep.
2. Use the Clone Stamp tool instead of the Healing Brush if you really need to brush over transparent pixels.
-Noel

Photoshop CS5 Spot Healing Brush only blurs

Here's a before and after shot. I recently upgraded from CS3 and the spot healing brush always worked great.
Now when I use it, whether or not I use content aware fill, it leaves a blurred residue of what I was trying to remove.
As an aside, the Content Aware Fill leaves a similar residue, enough to make it effectively unusable.
I have included a sample photo of the spot healing brush problem. Left side is before and right side is after.
I just wanted to get rid of the electrical wall socket. You can see that it's not working. I am running windows 8 in a 64-bit environtment and running the 64-bit version of Photoshop CS5.5
Any assitance anyone is able to afford me is greatly appreciated.
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 3392 MHz
Built-in memory: 16345 MB
Free memory: 12108 MB
Memory available to Photoshop: 14658 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Not Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 660/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 660
Driver Version: 9.18.13.546
Driver Date: 20120731000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode:
Video Card Caption: NVIDIA GeForce GTX 660
Video Card Memory: 1536 MB
Serial number: 95478754394945338970
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
Temporary file path: C:\Users\MICK92~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 1.81T, 1.30T free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
   AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265
   AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
   AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
   AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
   AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
   ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20
   aif_core.dll   AIF   2.0   53.422628
   aif_ogl.dll   AIF   2.0   53.422628
   amtlib.dll   AMTLib (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
   AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
   Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
   BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
   data_flow.dll   AIF   2.0   53.422628
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
   FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_flow.dll   AIF   2.0   53.422628
   image_runtime.dll   AIF   2.0   53.422628
   JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1263
   MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6871
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6871
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.6871
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS5.1   CS5.1
   Plugin.dll   Adobe Photoshop CS5   CS5
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   2.5.0.232
   PSArt.dll   Adobe Photoshop CS5.1   CS5.1
   PSViews.dll   Adobe Photoshop CS5.1   CS5.1
   SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
   tbb.dll   Threading Building Blocks   2, 1, 2009, 0201
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
   wu3d.dll   U3D Writer   9.3.0.113
Installed plug-ins:
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 6.3
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Color Halftone 12.0.2
   Colored Pencil 12.0
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Craquelure 12.0
   Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   De-Interlace 12.0.2
   Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Embed Watermark 4.0
   Extrude 12.0.2
   FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Grain 12.0
   Graphic Pen 12.0
   Halftone Pattern 12.0
   HDRMergeUI 12.0
   IFF Format 12.0.2
   Ink Outlines 12.0
   JPEG 2000 2.0
   Lens Blur 12.0
   Lens Correction 12.0.2
   Lens Flare 12.0.2
   Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Liquify 12.0.1
   Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mezzotint 12.0.2
   MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mosaic Tiles 12.0
   Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Neon Glow 12.0
   Nik Selective Tool 2.1.4.20894
   Note Paper 12.0
   NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Ocean Ripple 12.0
   OpenEXR 12.0.2
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Paths to Illustrator 12.0.2
   PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Photocopy 12.0
   Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Pinch 12.0.2
   Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Poster Edges 12.0
   Radial Blur 12.0.2
   Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.1
   Shear 12.0.2
   Silver Efex Pro 2 2,006
   Silver Efex Pro 2 2,006
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Sumi-e 12.0
   Targa 12.0.2
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   Underpainting 12.0
   Vanishing Point 12.0
   Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Wind 12.0.2
   Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Access CS Live
   Flash
   Kuler
   CS Review
Installed TWAIN devices: NONE

In my opinion, there's nothing wrong with your choice of Spot Healing Brush for this image. I cropped your screenshot to the "BEFORE" image, removed the "BEFORE" type (with the SHB) and scaled to 600% to match your original document.
A dab of a 0% hardness 500 pixel Spot Healing Brush in Ps CS5.1 on OS X 10.6.8 worked perfectly. However, I would have made a vertical stroke with the brush at about 80% hardness and about 200 pixels, which also works for me.
Maybe your SHB is working in "Create Texture" mode despite specifying "Proximity Match" in Options bar. Try resetting the SHB by right-clicking its icon at left of Options bar and picking "Reset Tool" from the menu that appears.

CS4 Healing Brush is leaving grey instead of sourced color

Similar Messages

Maybe you are looking for