CS4 I cannot capture in HDV only DV works
I am really new in this field so excuse my incompetence, but I really need help. I have recorded footage in HDV 1080I but i cannot capture it. I can run my device (my camera) from the capture window (play, <<, pause, etc.) but not capture. Only when I change settings into dv format, I can capture the material in DV. I use an ilink, windows Vista and premiere pro CS4. Anyone can help me analyze the problem. The camera is a new Sony z1
You are not using a trial version of Premiere are you? If you are, the trial does not have any HDV or HD features, as Adobe buy these from a third party.
Similar Messages
-
Can I capture in ProRes or is it HDV only?
Just want to confirm that HDV/DV are the only capture formats I can use when digitizing from tape. Then I set my timeline settings to Pro Res 422 HQ to edit and export.
MTPO666 wrote:
Just want to confirm that HDV/DV are the only capture formats I can use when digitizing from tape. Then I set my timeline settings to Pro Res 422 HQ to edit and export.
Hi MTPO666,
If you have a third party capture card, you can capture other formats. With no capture card, you are indeed limited to DV and HDV capture. In those cases, working with a Timeline setting set to anything but the native DV/HDV format will cause unnecessary processing. If you need ProRes output, you can export in one of its formats in the end.
Good luck,
Kevin -
I still cannot capture any HD format .. I have reformatted with a clean install on my macbookpro' .. reinstalled FC5.proStudio .. I tried not updating Quicktime .. still no HD capture .. then updated everything, quicktime 7.4.1 .. still no HD. capture .. doesn't recognize the camera .. works perfect in DV NTSC mode ... I can't afford to lose anymore hair. Any idea's?
That sounds scary' .. I think it is still under extended warranty .. thank god my dual G5 was still under warranty .. the cooling system sprung a leak and effectively wiped it out. That sounds possible, something with the camera itself .. before the latest upgrades to Leopard, it began not displaying the video in the capture window .. even though it was still capturing.
I see you are down under, I am working on a project right now for a renowned architect in New Zealand .. They found an old 1/2 hour dvd from the local television, a special on him in the mid 70's .. so my problem now has been to get the footage into FC.pro for re/editing. All the software I tried for extracting the dvd material suffered significant degradation .. so I filmed it off my cinema display in HD. Luckily I am still able to capture with basic NTSC. The quality is actually quite good.
I am not sure at this point which compressor to use to get the highest quality .. for now I just used: DV NTSC 48 khz. -
I tried to start a new project with different setting for SD, and all the settings I originally had for my HD project changed, now I cannot capture anymore. It took me a while to configure all the settings for HD with the 2:3:3:3 pulldown, but now I'm just plain confused. Anyone know a solution?
I shot in HD in the 24F mode on a Canon XH A1. I've been capturing fine, but now the camera is not recognized ever since I created a new project with different settings.I created those project settings thinking they would only apply to that project (an SD one), and now I cannot figure out the steps to get back to where I was. This is what I wrote down to for my "In System Settings" that worked:
Video Quality: Dynamic
Frame Rate: Full
Pulldown Pattern: 2:3:3:2
Frame Offset: 4
Record (Full Quality).
Easy Setup - HDV-1080i60
Then I set my compressor for HDV 1080p24.
Now this simply doesn't work and I cannot capture.
Is there a way to revert back to my old settings before I created a different project?
Very confused why I cannot recognize my camera. -
I have a 2008 black MacBook and acess UK tv through a puchased proxy. I want to purchase a Sony Bravia internet connected tv and stream the site through a tv - Sony tell me this won't work - that a latest model tv cannot capture content and sites from a MacBook - is this true???? Surely there is a solution? Any help or advice welcome.
They are correct. The only stream you can wireless connect the TV to a Mac is through an AppleTV, and that's purchased content on iTunes, and your own homemade content that is H.264 MPEG-4 that is 1800kbps. Conversion of commercial video to that format is illegal, and hence how can not be stated on the forum. Alternatively, as long as the TV is HDMI, you can wired connect it to your MacBook using the same advice here:
https://discussions.apple.com/message/16531141#16531141 -
"VTR OK" and device control works fine, but cannot capture? Please Help.
I am unable to capture my camera HDV footage by firewire to my new project on FCP.
When I open up Log and Capture everything is working fine except the screen is black and it wont capture? VTR is ok and when I press play it plays on my Camera lcd panel but not on FCP.
Can anybody help?
Thanks
Max.
Message was edited by: Maxon007Camera: Sony HDV Z1. Set to "auto" not "HDV"
Capture preset: HDV
In 'log and capture' the (capture settings) only provides a scratch disk option and nothing else? I have seen on tutorials that show alternative options on this toggle. This might be the problem.
Practically all is working fine except It wont capture. When asking it to capture "clip" it begins to work but the screen is blank and it sort of thinks its doing the job but its not?
Max
Message was edited by: Maxon007 -
i using sony htv v1u hdv cam . i can not get to capture the hdv device , only dv i can get it. please help.
Make sure everything is set to hdv. Camera but also the capture settings in CS5.
Connect camera to pc. Switsh it on and let Window reconize the camera.
A pop up comes and asks you what you want to do.
Select Premiere CS5.
Premiere will open and you should be able to capture. -
Cannot capture the expense claim
Hi all,
I wondered if someone could possibly help me with the following issue I'm having:I have been paid an advance for as trip; however, I cannot capture the expense claim for the trip. Please can someone advise me on how I can do this?
Kind regardsThank you very much Gregor. In fact, I already defined this throws exception in the remote object interface.
public interface UserAccount extends EJBObject {
public String getUserEmail(String accountID) throws RemoteException, SAPSystemException;
This is application-specific interface and this mechanism works well in my previous in other application server.
I checked the SAP document and found if you using RMI-IIOP, you need to get the client package for your deployed EJBs and put in the path accessible by the WEB components. Based on this suggestion, I put the EJB jar file together with WEB application (Sure the EJB application still deployed in other host and JNDI point to that host. I remembered one book mentioned that if you don't want generate the client package from EJB containter, you can do it this way. For me, I just haven't found the way to get the client package with Administrator Tool it said.), It works!!!. I checked the remote object generated by home object, it is different with EJB jar file there or not. But in the document SAP said that only if you use RMI-IIOP you need do this way, for RMI-P4, you don't need that. Anyway, it seems that RMI-P4 use same way as RMI-IIOP(You only don't need narrow the home object after lookup).
I'll try to find how to get EJB client package from WAS server. For this is my first time to use SAP WAS Server, things a little strange.
Thank you very much for your great help.
Cheers. -
It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??
Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times. -
i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?
If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases. -
I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?
You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple. -
Quicktime Player-Cannot Capture
Had no problem with Quicktime new screen recordings until the last couple of days. It starts to record fine and then about 50 mins to 1 hour 30 mins it comes up with a box saying "Cannot Capture" and just stops recording!! Anybody have this problem? I have Mountain Lion. Thanks.
I'm capturing the whole screen and using the internal microphone for sound.
I keep checking but still have the same problem.
I noticed that there was a recent security update 2013-003 which had an effect on Quicktime, I wonder if this is causing the problem? Can anybody shed any light on this?
I have attached an image below of what pops up when it just stops recording. -
Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks
Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you? -
Cannot disable the tax-only calculation in a AR Credit Notes document
Hello,
When trying to raise a tax only credit the following error message appears "Cannot disable the tax-only calculation in a AR Credit Notes document that was based on another document"
I have two lines specified in the AR Credit Note screen both with a tick under the 'Tax only' column.
Would anyone be able to advise?
Regards,
JuanHi,
Just to confirm you there is no option for this. If you have created the invoice(base document) for that then you cant change it in target document..
Other wise you can do one thing while copying it in target doc. just select customize option in copy from--> draw document wizard & select the right items you want.
Regards.
ShriX. -
Page cannot be displayed message ONLY on the content area of the portal
Hi All,
I am using Netweaver Portal 7.0 and the portal works fine if logged in as an end user. But when I'm logged in as Administrator and whenever I try to create a portal object (iview or pages etc), I get a page cannot be displayed message ONLY on the content area of the portal. It is happening quite frequently, any clue what is wrong here?
Thanks for your help
-MikeHi
This could sometimes happen because of multiple users working on the same content .
Edited by: chandana kallu on Mar 11, 2008 1:41 PM
Maybe you are looking for
-
Error in Oracle API HZ_CUST_ACCOUNT_V2PUB.create_cust_account Column account_number must have a value. why?
-
Can I use straight cable to connect trunk ports between 2 switches?
Hi, Am I able to use straight instead of cross cable to connect trunk ports between 2 switches?? thanks!
-
Force exit form when I am in query mode.
I have created one button just launch Exit_Form built_in. Ok my forms exit, but when I stay in query mode, I need to click at button twice, first to abort query, the second time to exit form. How can I configure that to close my form automatically? I
-
60min usage subscription steps to make a call
Have office 365 60min subscription. .when i make a call in skype., it asks me to buy credit...i logged in using Microsoft account. How do I make a call using the office 365 60 min per month subscription? I couldn't find any video or step-by-step manu
-
Can't open Premiere Pro 6.0 file in PP CS6
I have a Premiere project I created ages ago in Premiere Pro v 6, and I'm trying to open it in PP CS6. I've tried opening it through Windows Explorer (both double clicking, and right-click > Open with PP). I've also tried using the Open dialog in PP